☆ 4.8 Article

Anchoring and catalyzing polysulfides by rGO/MoS2/C modified separator in lithium-sulfur batteries

CARBON (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

Efficient Regulation of Polysulfides by MoS2/MoO3 Heterostructures for High-Performance Li-S Batteries

Pu Cheng et al.

Summary: In this study, a novel architecture of MoS2/MoO3 heterostructure uniformly distributed on carbon nanotubes was introduced into Li-S batteries via decorating commercial separator to regulate the redox reactions of polysulfides. The heterostructure provides a surface affinity to capture polysulfides and acts as an active catalyst to promote their conversion, while the highly conductive CNT enables rapid electron/ion migration. The Li-S batteries with this architecture exhibit impressive reversible and rate capacities, as well as low self-discharge capacity loss, even at an elevated temperature of 70 degrees C.

SMALL (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Covalent Coupled Sulfur-Deficient MoS2 Nanosheets on Carbon Nanotubes toward Polysulfide Catalytic Conversion in a Lithium Sulfur Battery

Yuanyuan Li et al.

Summary: A rational design of vertical MoS2 nanosheets anchored on carbon nanotubes is proposed to inhibit the shuttle effect of polysulfides and improve the cycling stability and electrochemical performance of lithium sulfur batteries.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2023)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

Anchoring polysulfides via a CoS2/NC@1T MoS2 modified separator for high-performance lithium-sulfur batteries

Qicheng Li et al.

Summary: By modifying the polypropylene separator with metal-organic framework-derived CoS2/NC@1T MoS2, this study successfully addresses the shuttle effect and capacity decay issues in lithium-sulfur batteries. The coating limits the dissolution of soluble polysulfides, improves the redox kinetics of polysulfides, and shortens the transport path of lithium ions and electrons, leading to enhanced capacity retention.

INORGANIC CHEMISTRY FRONTIERS (2023)

添加到收藏夹

Article Chemistry, Physical

Na3V2(PO4)3-decorated separator as an improved catalysis ceramic layer for high-performance lithium sulfur batteries

Ji Yan et al.

Summary: In this study, a NASICON-type ceramic material Na3V2(PO4)(3) is developed to decorate on polypropylene (PP) membrane as a catalysis layer, which can adsorb lithium polysulfides and accelerate the conversion of sulfur electrochemistry redox reaction. Additionally, the sophisticated architecture on separator provides additional lithium ion intercalaction-extraction behavior to hinder the shuttle effect of lithium polysulfides. These contributions result in excellent capacitive performance and superior rate capability in lithium-sulfur batteries.

IONICS (2023)

添加到收藏夹

Article Chemistry, Physical

The role of selenium vacancies functionalized mediator of bimetal (Co, Fe) selenide for high-energy-density lithium-sulfur batteries

Xiyang Kang et al.

Summary: A 3D carbon nanotubes decorated cubic Co9Se8_x/FeSe2_y composite was developed and used in lithium-sulfur batteries, which showed high reversible capacity and cycle stability due to its good electrical conductivity, abundant selenium vacancies, and triple block/adsorption/catalytic effects of Co9Se8_x/FeSe2_y@CNTs.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Facilitating polysulfide confinement using N-doped honeycomb-like carbon with high pyridinic-nitrogen content for high-performance Li-S batteries

Lai Chen et al.

Summary: Increasing the nitrogen dopant content, especially pyridinic-N species, in carbonaceous materials can significantly improve the performance of lithium-sulfur batteries. However, achieving high N dopant content (>5 at.%) and regulating specific N species in carbonaceous materials are challenging. In this study, a three-dimensional honeycomb-like N-doped mesoporous carbon material with a high N dopant content (8.82 at.%, pyridinic-N content 3.49 at.%) was obtained through a phosphorisation process followed by calcining calcium pantothenate under an Ar atmosphere. The resulting sulfur cathode (S/PNMC-800) exhibited superior electrochemical performance with a discharge specific capacity of 556.7 mA h g(-1) after 300 cycles at 1 C, demonstrating the potential of this technique for the development of functional S hosts for Li-S batteries.

SCIENCE CHINA-MATERIALS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Promoting Strong Adsorption and Fast Conversion of Polysulfides in Li-S batteries Based on Conductive Sulfides Host with Hollow Prism Structure and Surface Defects

Peng Zeng et al.

Summary: This study designs defect-enriched Co9S8 hollow prisms as both S host and catalyst material for Li-S batteries, achieving strong adsorption and fast conversion of polysulfides. The experiment shows that the material can effectively promote the generation of S-3(center dot-) radicals and realize fast conversion through a unique reaction pathway. Under certain conditions, the cell with this material exhibits high capacity and cycling stability, which is of great significance for the development of Li-S batteries.

ADVANCED FUNCTIONAL MATERIALS (2023)

添加到收藏夹

Article Chemistry, Physical

Capillary-induced self-crumpled and sulfur-deficient MoS2 nanosheets inhibit polysulfide cycling in lithium-sulfur batteries

Rohan Paste et al.

Summary: Stable lithium-sulfur batteries have the potential to be the next generation of stable energy-storage devices. This study introduces a modified separator (MC separator) with crumpled MoS2 nanosheets, which can adsorb lithium polysulfides and provide additional reaction sites, leading to enhanced specific capacity and cycling stability of the battery.

JOURNAL OF MATERIALS CHEMISTRY A (2023)

添加到收藏夹

Article Chemistry, Physical

Pre-doping iodine to restrain formation of low-active graphitic-N in hard carbon for significantly boosting sodium storage performance

Jie Chen et al.

Summary: Nitrogen doping can improve the electrocatalysis performance of hard carbon as an anode material in sodium-ion batteries. An iodine-predoping approach effectively restrains the formation of graphitic-N in C-N configurations, leading to a controllably constructed HC anode with high reversible capacity and long lifespan. This work provides fundamental insights for constructing desired C-N configuration in host materials.

CARBON (2022)

添加到收藏夹

Article Chemistry, Physical

A Mott-Schottky Heterogeneous Layer for Li-S Batteries: Enabling Both High Stability and Commercial-Sulfur Utilization

Mengjiao Shi et al.

Summary: This study reports a modified separator for commercial-sulfur-based lithium-sulfur batteries to improve their cycling stability and sulfur utilization.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Biochemistry & Molecular Biology

DFT Simulation-Based Design of 1T-MoS2 Cathode Hosts for Li-S Batteries and Experimental Evaluation

Elaheh Hojaji et al.

Summary: The main challenge in lithium sulphur (Li-S) batteries is the shuttling of lithium polysulphides (LiPSs) caused by the rapid LiPSs migration to the anode and the slow reaction kinetics in the chain of LiPSs conversion. In this study, the affinity of 1T-MoS2 substrates towards LiPSs and their electrocatalytic effects were examined. The findings suggest that a combination of 1T-MoS2 regions, without or with one and two sulphur vacancies, can improve Li-S battery performance.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Understanding the Catalytic Kinetics of Polysulfide Redox Reactions on Transition Metal Compounds in Li-S Batteries

Jiao Wu et al.

Summary: Lithium-sulfur (Li-S) batteries are potential candidates for next-generation energy-storage devices due to their high energy density, low cost, and environmental friendliness. However, issues such as sluggish reaction kinetics and capacity degradation have hindered their development. The introduction of transition metal compounds (TMCs) as catalysts has overcome these challenges. The recent advances in TMC catalysts and design strategies for Li-S batteries are summarized.

ACS NANO (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Carbon Surface Chemistry: New Insight into the Old Story

Yuxiao Ding et al.

Summary: By analyzing various defects on the carbon surface, this article points out some commonly neglected aspects and misunderstandings in the field of carbon surface chemistry, clarifying how surface chemistry affects the chemical behaviors of carbon in specific chemical reactions. The importance of considering the carbon surface chemistry comprehensively and the prospects for future developments are also provided.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Manipulating the electrocatalytic activity of sulfur cathode via distinct cobalt sulfides as sulfur host materials in lithium-sulfur batteries

Xiyang Kang et al.

Summary: This study focuses on the development of lithium-sulfur (Li-S) batteries by fabricating sulfur hosts with cheap and rapid sulfur reaction properties and inhibiting the shuttling effect of lithium polysulfides (LiPSs). Hollow cubic materials with nitrogen-doped carbon derived from Prussian blue analogues (PBA) precursor were prepared at different vulcanization temperatures. Among them, CoS1.097/MnS/NC@NC-600 showed the best performance in terms of adsorption ability and electrocatalytic activity, greatly improving the electrochemical performances of Li-S batteries.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

One dimensional carbon-based composites as cathodes for lithium-sulfur battery

Jin Luo et al.

Summary: The article discussed the latest progress and strategies of one-dimensional carbon materials as cathodes for lithium-sulfur batteries, summarized the strategies for polysulfide confinement and functional analysis of various components in composite materials. It also systematically reviewed the challenges faced by LSBs and proposed future prospects.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Charge self-regulation in 1T'''-MoS2 structure with rich S vacancies for enhanced hydrogen evolution activity

Xiaowei Guo et al.

Summary: This study reveals the charge self-regulation effect mediated by tuning Mo-Mo bonds and S vacancies, leading to the generation of active electronic states in 1T'''-MoS2 structure, thus enhancing the activity of the hydrogen evolution reaction. The optimal 1T'''-MoS2 sample exhibits excellent electrocatalytic performance in acidic conditions, surpassing the performance of 2H-MoS2.

NATURE COMMUNICATIONS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Defective Graphitic Carbon Nitride Modified Separators with Efficient Polysulfide Traps and Catalytic Sites for Fast and Reliable Sulfur Electrochemistry

Zhaoming Tong et al.

Summary: By introducing defective graphite phase carbon nitride as an effective additive, this study successfully mitigated lithium polysulfide adsorption/catalysis effects, enabling high rate charging and discharging in lithium-sulfur batteries. The chainmail catalyst design with separators contributed to the long-term stability and high capacity of the assembled cells, demonstrating excellent cycling performance and durability under high rates.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Advanced lithium–sulfur batteries enabled by a SnS2-Hollow carbon nanofibers Flexible Electrocatalytic Membrane

Chengbiao Wei et al.

CARBON (2021)

添加到收藏夹

Article Chemistry, Physical

Polyaniline Encapsulated Amorphous V2O5 Nanowire-Modified Multi-Functional Separators for Lithium-Sulfur Batteries

Kai Chen et al.

Summary: By synthesizing the VOH@PANI-PP multi-functional separator, this study effectively suppresses polysulfide shuttling and improves the cycling stability of Li-S batteries.

SMALL METHODS (2021)

添加到收藏夹

Article Chemistry, Physical

Understanding the high-performance Fe(OH)3@GO nanoarchitecture as effective sulfur hosts for the high capacity of lithium-sulfur batteries

Mohammed A. Al-Tahan et al.

Summary: The Fe(OH)(3)@GO nanocomposite, serving as a novel sulfur host for Li-S batteries, provides high specific capacity, good rate performance, and long cycling stability due to the strong surface binding interaction and fast charge-transfer kinetics. This nanoarchitecture, constructed via electrostatic self-assembly process, utilizes the hydroxyl groups of Fe(OH)(3) to attract polysulfides and the functional groups of GO to trap polysulfides.

APPLIED SURFACE SCIENCE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Anchoring Polysulfides and Accelerating Redox Reaction Enabled by Fe-Based Compounds in Lithium-Sulfur Batteries

Zhensong Qiao et al.

Summary: The study introduced a porous carbon framework containing Fe-based compounds to improve the performance of lithium-sulfur batteries, showcasing strong chemisorption and catalytic ability. This framework effectively stabilizes the conversion of LiPSs, enhancing battery stability and rate performance.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Electrochemistry

Nitrogen-doped carbonaceous scaffold anchored with cobalt nanoparticles as sulfur host for efficient adsorption and catalytic conversion of polysulfides in lithium-sulfur batteries

Bin Fan et al.

Summary: A three-dimensional sulfur carrier, Co-NCNT, was designed to enhance the conversion efficiency of sulfur polysulfides and promote the nucleation of Li2S, leading to excellent long cycle stability and rate performance of Li-S batteries.

ELECTROCHIMICA ACTA (2021)

添加到收藏夹

Review Chemistry, Physical

Recent progress of functional separators with catalytic effects for high-performance lithium-sulfur batteries

Cheng Yuan et al.

Summary: Lithium-sulfur (Li-S) batteries are considered promising energy storage systems, but face challenges such as polysulfide shuttle effect and sluggish reaction kinetics. Various strategies, including functionalizing separators with catalytic materials, have been adopted to improve battery performance. Functional separators can effectively inhibit polysulfide shuttle effect and accelerate sulfur redox reaction kinetics for enhanced electrochemical performance.

NANO ENERGY (2021)

添加到收藏夹

Article Chemistry, Physical

Implanting nickel and cobalt phosphide into well-defined carbon nanocages: A synergistic adsorption-electrocatalysis separator mediator for durable high-power Li-S batteries

Zeliang Wu et al.

Summary: This study demonstrates the use of Ni, Co bimetal phosphides in hollow carbon nanocages as a multifunctional separator interlayer for high-power Li-S batteries, achieving outstanding cyclic lifespan and rate performance.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Review Chemistry, Physical

Rationalizing Electrocatalysis of Li-S Chemistry by Mediator Design: Progress and Prospects

Yingze Song et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synthesis of Novel 1T/2H-MoS2from MoO3Nanowires with Enhanced Photocatalytic Performance

Wan Zhao et al.

NANOMATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Freestanding agaric-like molybdenum carbide/graphene/N-doped carbon foam as effective polysulfide anchor and catalyst for high performance lithium sulfur batteries

Shuzhang Niu et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Multifunctional LDH/Co9S8 heterostructure nanocages as high-performance lithium-sulfur battery cathodes with ultralong lifespan

Shixia Chen et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

The incorporation of expanded 1T-enriched MoS2 boosts hybrid fiber improved charge storage capability

Chenyang Yu et al.

CARBON (2020)

添加到收藏夹

Article Chemistry, Physical

An organic-inorganic composite separator for preventing shuttle effect in lithium-sulfur batteries

Jinil Cho et al.

SUSTAINABLE ENERGY & FUELS (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Anode Interface Engineering and Architecture Design for High-Performance Lithium-Sulfur Batteries

Yuanyuan Zhao et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ferromagnetic Nanoparticle-Assisted Polysulfide Trapping for Enhanced Lithium-Sulfur Batteries

Zan Gao et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Root-like porous carbon nanofibers with high sulfur loading enabling superior areal capacity of lithium sulfur batteries

Xiaohui Zhao et al.

CARBON (2018)

添加到收藏夹

Article Engineering, Environmental

Fe-N-doped carbon nanofiber and graphene modified separator for lithium-sulfur batteries

Xiong Song et al.

CHEMICAL ENGINEERING JOURNAL (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Controlled Growth of Bilayer-MoS2 Films and MoS2-Based Field-Effect Transistor (FET) Performance Optimization

Mingxu Fang et al.

ADVANCED ELECTRONIC MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

An Aqueous Inorganic Polymer Binder for High Performance Lithium-Sulfur Batteries with Flame-Retardant Properties

Guangmin Zhou et al.

ACS CENTRAL SCIENCE (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Catalytic oxidation of Li2S on the surface of metal sulfides for Li-S batteries

Guangmin Zhou et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

In Situ XPS Investigation of Transformations at Crystallographically Oriented MoS2 Interfaces

Neha P. Kondekar et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Freestanding Metallic 1T MoS2 with Dual Ion Diffusion Paths as High Rate Anode for Sodium-Ion Batteries

Xiumei Geng et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

MoS2/Celgard Separator as Efficient Polysulfide Barrier for Long-Life Lithium-Sulfur Batteries

Zahid Ali Ghazi et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Entrapment of Polysulfides by a Black-Phosphorus-Modified Separator for Lithium-Sulfur Batteries

Jie Sun et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Targeted Synthesis of 2H-and 1T-Phase MoS2 Monolayers for Catalytic Hydrogen Evolution

Kun Chang et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Fabrication of carbon nanorods and graphene nanoribbons from a metal-organic framework

Pradip Pachfule et al.

NATURE CHEMISTRY (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Fast and Efficient Preparation of Exfoliated 2H MoS2 Nanosheets by Sonication-Assisted Lithium Intercalation and Infrared Laser-Induced 1T to 2H Phase Reversion

Xiaobin Fan et al.

NANO LETTERS (2015)

添加到收藏夹

Review Chemistry, Physical

Progress in Mechanistic Understanding and Characterization Techniques of Li-S Batteries

Rui Xu et al.

ADVANCED ENERGY MATERIALS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Atomic Mechanism of Dynamic Electrochemical Lithiation Processes of MoS2 Nanosheets

Lifen Wang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Nonlinear strain effects in double-resonance Raman bands of graphite, graphene, and related materials

Elena del Corro et al.

PHYSICAL REVIEW B (2012)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.