☆ 4.8 Article

Dendritic growth lowers carbon electrode work function for efficient perovskite solar cells

CARBON (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Energy & Fuels

Chiral Molecular Environment Determining Selective Coordination of Cysteine to Perovskite Halogen Vacancies

Jialing Liu et al.

Summary: In this study, L- and D-cysteine were introduced into carbon-based fully printable mesoscopic perovskite solar cells as additives, achieving power conversion efficiencies of 17.41% and 15.12% respectively. Density functional theory (DFT) was used to explore the reasons for the differences in photoelectric conversion performance, including enhanced negative surface electrostatic potential, inhibition of nonradiative recombination, improved perovskite crystallization, stability, and light capture.

SOLAR RRL (2023)

添加到收藏夹

Article Multidisciplinary Sciences

Minimizing buried interfacial defects for efficient inverted perovskite solar cells

Shuo Zhang et al.

Summary: In this study, an amphiphilic molecular hole transporter with a multifunctional cyanovinyl phosphonic acid group was used to deposit a superwetting underlayer for perovskite deposition. This enabled the formation of high-quality perovskite films with minimized defects at the buried interface. The resulting perovskite film showed excellent photoluminescence properties and achieved a certified PCE of 25.4%, demonstrating its potential for application in solar cells.

SCIENCE (2023)

添加到收藏夹

Article Multidisciplinary Sciences

Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells

Minjin Kim et al.

Summary: The study replaced the commonly used mesoporous titanium dioxide electron transport layer with a thin layer of polyacrylic acid-stabilized tin(IV) oxide quantum dots, which improved the efficiency and stability of perovskite solar cells and enabled successful scaling up of PSCs production.

SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Minimizing the Voltage Loss in Hole-Conductor-Free Printable Mesoscopic Perovskite Solar Cells

Jiankang Du et al.

Summary: The hole-conductor-free printable mesoscopic perovskite solar cells based on inorganic scaffolds have excellent stability and low manufacturing cost. By reinforcing the built-in electric field (BEF), carrier transport is improved and carrier recombination losses are significantly reduced, resulting in higher open-circuit voltages and power conversion efficiency. This strategy provides a new approach to fabricating efficient printable perovskite solar cells.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Molecularly Tailored SnO2/Perovskite Interface Enabling Efficient and Stable FAPbI3 Solar Cells

Yang Zhang et al.

Summary: This study demonstrates a strategy of molecularly tailoring the FAPbI(3)/SnO2 interface to enhance the stability of perovskite solar cells. By optimizing the configuration of C-O and C=O groups, the device achieved a champion power conversion efficiency of 23.5% and maintained good stability under continuous light illumination.

ACS ENERGY LETTERS (2022)

添加到收藏夹

Review Chemistry, Applied

Current status and trends of carbon-based electrodes for fully solution-processed perovskite solar cells

Laura M. Gonzalez et al.

Summary: Perovskite solar cells (PSCs) have made significant progress with the use of carbon-based electrodes (CEs) as alternatives to metallic counter electrodes. Carbon materials possess good electrical and thermal conductivity, as well as chemical stability, making them highly promising for PSCs. The composition of CEs, particularly their ability to be processed at both high and low temperatures, is emphasized in this review. The review also highlights the opportunities and trends in using CEs in PSCs devices.

JOURNAL OF ENERGY CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Physical

Silk fibroin induced homeotropic alignment of perovskite crystals toward high efficiency and stability

Bowen Jin et al.

Summary: This study reports a method using silk fibroin as crystal growth template and trap passivation agent to improve the conversion efficiency and stability of perovskite thin films.

NANO ENERGY (2022)

添加到收藏夹

Article Chemistry, Physical

Experimental Determination of the Molar Absorption Coefficient of Cesium Lead Halide Perovskite Quantum Dots

Subhashri Mannar et al.

Summary: This study presents a direct method for determining the concentration of perovskite quantum dots using spectrophotometry, and investigates the relationship between the size of the quantum dots and their molar absorption coefficient. The results can be used to calculate nanocrystal concentrations and estimate the size of quantum dots.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Inactive (PbI2)2RbCl stabilizes perovskite films for efficient solar cells

Yang Zhao et al.

Summary: In halide perovskite solar cells, introducing RbCl doping effectively stabilizes the perovskite phase by converting excess PbI2 into an inactive compound. This strategy achieved a certified PCE of 25.6% for FAPbI(3) perovskite solar cells, with high device stability and minimal hysteresis effects.

SCIENCE (2022)

添加到收藏夹

Article Energy & Fuels

Surface Lattice Perturbation of Electron Transport Layer Reducing Oxygen Vacancies for Positive Photovoltaic Effect

Jingshan He et al.

Summary: For carbon-based fully printable mesoscopic perovskite solar cells (FP-PSCs), modifying the interface between perovskite and electron transport layer can effectively enhance their photovoltaic performance. Researchers have deposited ultrathin ZrO2 on the surface of mesoporous TiO2 using spray pyrolysis, which reduces surface oxygen vacancies and inhibits nonradiative recombination, resulting in improved open-circuit voltage and short-circuit current density. The high power conversion efficiency of 17.81% achieved in this study provides a novel idea and technology for efficient interfacial modification in FP-PSCs.

SOLAR RRL (2022)

添加到收藏夹

Article Energy & Fuels

Comparative Study of the Correlation between Diffusion Length of Charge Carriers and the Performance of CsSnGeI3 Perovskite Solar Cells

Ali K. Al-Mousoi et al.

Summary: Lead-halide perovskite-based solar cells have attracted attention in the energy field due to their enhanced performance and simplicity in manufacturing. However, the toxicity of lead has led to an interest in exploring lead-free alternatives. This research investigated the use of a lead-free perovskite material and tested the impact of thickness and defect density on the efficiency of the solar cells.

ENERGY & FUELS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Manganese doping: A novel approach to enhancing surface wettability of carbon electrodes

Jie Sheng et al.

Summary: Wettability is a key factor limiting the electrochemical performances of aqueous supercapacitors using mesoporous carbon as electrode material. This study finds that doping with manganese metal effectively improves the wettability of phenol-formaldehyde resin-based carbon electrode material by increasing the nitrogen oxide active sites. The introduction of a second metal, nickel, changes the morphology and improves ion diffusion control capacitance, while also forming pseudocapacitance. The research demonstrates significantly increased specific capacitance and energy density. This study provides insights for improving the wettability of mesoporous carbon materials.

CARBON TRENDS (2022)

添加到收藏夹

Article Chemistry, Physical

Effects of the location and size of plasmonic nanoparticles (Ag and Au) in improving the optical absorption and efficiency of perovskite solar cells

Mohammad Hosein Mohammadi et al.

Summary: Organometal halide perovskite has great potential in perovskite solar cell technology, with plasmonic nanoparticles enhancing light absorption within the active layer. The use of gold and silver compositions in plasmonic nanoparticles increases absorption, impacting the performance of the device. The location and radius of plasmonic nanoparticles are crucial factors affecting the efficiency of the perovskite solar cell.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Energy & Fuels

A 2D Model for Interfacial Recombination in Mesoscopic Perovskite Solar Cells with Printed Back Contact

Lukas Wagner et al.

Summary: This study introduces a physical model to explain 2D charge recombination in mesoscopic graphite-based perovskite solar cells, providing insights into interface recombination and design rules for optimal geometry of mesoporous layers. The research also highlights the necessity of a characteristic thick absorber layer to enhance photovoltage and identifies limiting recombination pathways for future device architectures.

SOLAR RRL (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

添加到收藏夹

Article Chemistry, Physical

Improved Operational Stability of Perovskite Solar Cells via Au Barrier Layer Incorporation

Sikai Mei et al.

Summary: The use of bilayer metal electrodes improves the operational stability of perovskite solar cells by preventing metal electrode corrosion. Under maximum power point conditions, bilayer electrodes demonstrate significantly longer operational stability compared to devices with single metal electrodes.

ACS APPLIED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Unveiling the role of carbon black in printable mesoscopic perovskite solar cells

Priyanka Kajal et al.

Summary: This study investigates the impact of different types of carbon blacks on the properties of carbon electrodes and the photovoltaic performance of carbon-based perovskite solar cells. The results show that carbon electrodes based on VC exhibit good wettability, infiltration, and adhesion, leading to higher device stability and efficiency.

JOURNAL OF POWER SOURCES (2021)

添加到收藏夹

Article Chemistry, Physical

Highly efficient wide-band-gap perovskite solar cells fabricated by sequential deposition method

Xinxing Liu et al.

Summary: A highly efficient wide-band-gap perovskite solar cell device has been successfully fabricated using the two-step sequential deposition method in this study, with a bandgap of 1.63-1.65 eV; the best solar cell obtained has a power conversion efficiency of 20.35% and a fill factor (FF) of 81.53%.

NANO ENERGY (2021)

添加到收藏夹

Article Energy & Fuels

Cellulose-Based Oxygen-Rich Activated Carbon for Printable Mesoscopic Perovskite Solar Cells

Chao Liu et al.

Summary: Activated carbon synthesized from cellulose was used as back electrodes in perovskite solar cells, leading to improved efficiency due to enhanced wettability and contact between the electrodes and perovskites. The high oxygen content in the activated carbon also raised the work function of the electrodes, contributing to the performance enhancement in the cells.

SOLAR RRL (2021)

添加到收藏夹

Article Chemistry, Physical

Stabilizing Perovskite Solar Cells to IEC61215:2016 Standards with over 9,000-h Operational Tracking

Anyi Mei et al.

JOULE (2020)

添加到收藏夹

Article Chemistry, Physical

Needle coke: A predominant carbon black alternative for printable triple mesoscopic perovskite solar cells

Ya Zhong et al.

CARBON (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Passivation of the grain boundaries of CH3NH3PbI3 using carbon quantum dots for highly efficient perovskite solar cells with excellent environmental stability

Qiang Guo et al.

NANOSCALE (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Formation and Diffusion of Metal Impurities in Perovskite Solar Cell Material CH3NH3PbI3: Implications on Solar Cell Degradation and Choice of Electrode

Wenmei Ming et al.

ADVANCED SCIENCE (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Interpretation and evolution of open-circuit voltage, recombination, ideality factor and subgap defect states during reversible light-soaking and irreversible degradation of perovskite solar cells

Wolfgang Tress et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhanced p-i-n type perovskite solar cells by doping AuAg@AuAg core-shell alloy nanocrystals into PEDOT:PSS layer

Ziqi Sun et al.

ORGANIC ELECTRONICS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Flexible Solid-State Supercapacitors with Enhanced Performance from Hierarchically Graphene Nanocomposite Electrodes and Ionic Liquid Incorporated Gel Polymer Electrolyte

Lanxiang Feng et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Nanoengineering of Core-Shell Magnetic Mesoporous Microspheres with Tunable Surface Roughness

Qin Yue et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Single Crystal Formamidinium Lead Iodide (FAPbI3): Insight into the Structural, Optical, and Electrical Properties

Qifeng Han et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

2D quasi-ordered nitrogen-enriched porous carbon nanohybrids for high energy density supercapacitors

Kan Kan et al.

NANOSCALE (2016)

添加到收藏夹

Article Chemistry, Physical

Formamidinium Lead Halide Perovskite Crystals with Unprecedented Long Carrier Dynamics and Diffusion Length

Ayan A. Zhumekenov et al.

ACS ENERGY LETTERS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Hydrophilic Hierarchical Nitrogen-Doped Carbon Nanocages for Ultrahigh Supercapacitive Performance

Jin Zhao et al.

ADVANCED MATERIALS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Efficient Semitransparent Perovskite Solar Cells with Graphene Electrodes

Peng You et al.

ADVANCED MATERIALS (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Electron-hole diffusion lengths > 175 μm in solution-grown CH3NH3PbI3 single crystals

Qingfeng Dong et al.

SCIENCE (2015)

添加到收藏夹

Article Chemistry, Physical

The effect of carbon counter electrodes on fully printable mesoscopic perovskite solar cells

Lijun Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

添加到收藏夹

Article Chemistry, Physical

High-performance planar heterojunction perovskite solar cells: Preserving long charge carrier diffusion lengths and interfacial engineering

Sai Bai et al.

NANO RESEARCH (2014)

添加到收藏夹

Article Multidisciplinary Sciences

A hole-conductor-free, fully printable mesoscopic perovskite solar cell with high stability

Anyi Mei et al.

SCIENCE (2014)

添加到收藏夹

Article Multidisciplinary Sciences

Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells

Yuchuan Shao et al.

NATURE COMMUNICATIONS (2014)

添加到收藏夹

Article Engineering, Chemical

Coordination Number of the Packing of Ternary Mixtures of Spheres: DEM Simulations versus Measurements

L. Y. Yi et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2011)

添加到收藏夹

Article Chemistry, Multidisciplinary

Fabrication of free-standing graphene/polyaniline nanofibers composite paper via electrostatic adsorption for electrochemical supercapacitors

Sheng Liu et al.

NEW JOURNAL OF CHEMISTRY (2011)

添加到收藏夹

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

添加到收藏夹

Article Physics, Multidisciplinary

Raman spectrum of graphene and graphene layers

A. C. Ferrari et al.

PHYSICAL REVIEW LETTERS (2006)

添加到收藏夹

Article Chemistry, Physical

Formation of ordered arrays of oriented polyaniline nanoparticle nanorods

HB Xia et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.