4.8 Article

Adsorption properties of active biochar: Overlooked role of the structure of biomass

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Environmental

Cyclodextrin-functionalized magnetic alginate microspheres for synchronous removal of lead and bisphenol a from contaminated soil

Jianhua Qu et al.

Summary: In this study, beta-cyclodextrin functionalized magnetic sodium alginate microspheres (MSA-CDMW) were synthesized for the removal of Pb and BPA from contaminated soil. The MSA-CDMW exhibited high adsorption capacity and could be easily separated from the soil using magnets. The study provides a novel and eco-friendly strategy for the remediation of heavy metals and organics contaminated soil.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Environmental Sciences

A novel PEI-grafted N-doping magnetic hydrochar for enhanced scavenging of BPA and Cr(VI) from aqueous phase?

Jianhua Qu et al.

Summary: Polyethyleneimine-grafted nitrogen-doping magnetic hydrochar (PEIMW@MNHC) was synthesized and used as an adsorbent for the removal of hexavalent chromium (Cr(VI)) and bisphenol A (BPA) from water. The PEIMW@MNHC exhibited high adsorption capacity for both Cr(VI) and BPA and was tolerant to various coexisting ions. The mechanism of adsorption involved the participation of protonated amino groups, intramolecular heterocyclic N, Fe(II), azo, Fe-NX, and graphitic N structures.

ENVIRONMENTAL POLLUTION (2023)

Article Green & Sustainable Science & Technology

Remediation of atrazine contaminated soil by microwave activated persulfate system: Performance, mechanism and DFT calculation

Jianhua Qu et al.

Summary: The microwave-activated persulfate system was proposed for remediation of organochlorine pesticide contaminated soil. Under suitable conditions, this system could effectively degrade atrazine and showed high tolerance to co-existing substances. Additionally, organic substance content favored the degradation of pesticides in soil.

JOURNAL OF CLEANER PRODUCTION (2023)

Article Environmental Sciences

Mechanistic understanding of perfluorooctane sulfonate (PFOS) sorption by biochars

Samuel Krebsbach et al.

Summary: Biochar is a cost-effective solution for removing per- and polyfluoroalkyl substances (PFAS) from water, but the specific physicochemical properties of biochars that determine their PFAS removal remain unknown. In this study, 15 biochars were produced from five feedstocks at three pyrolysis temperatures to investigate their removal efficiency of perfluorooctane sulfonate (PFOS), a type of PFAS, from water. It was found that biochar pore diameter was the most critical factor for PFOS removal, but other factors such as pore diameter/pore volume ratio, specific surface area, pyrolysis temperature, hydrophobicity, and elemental composition also played roles. Biochars with small pore diameter, low nitrogen content, and high pyrolysis temperature showed enhanced PFOS sorption. These findings contribute to the understanding of using biochars with optimized properties to remove PFAS compounds from water.

CHEMOSPHERE (2023)

Article Agricultural Engineering

High-performance biochar derived from the residue of Chaga mushroom (Inonotus obliquus) for pollutants removal

Jindou Shi et al.

Summary: A high-performance biochar derived from the residue of Chaga mushroom was prepared and characterized in this study. The biochar exhibited a large specific surface area and high adsorption capacity, showing efficient adsorption of pollutants in natural water. The adsorption mechanism included electrostatic attraction, hydrogen bonding, π-π interactions, and pore-filling. Overall, the biochar showed great potential as an effective adsorbent for pollutant removal.

BIORESOURCE TECHNOLOGY (2022)

Article Agricultural Engineering

Mesoporous and adsorption behavior of algal biochar prepared via sequential hydrothermal carbonization and ZnCl2 activation

Thanh-Binh Nguyen et al.

Summary: Biochar derived from brown algal Ascophyllum nodosum showed good adsorption performance for antibiotic removal from water. The biochar, recycled from biowaste, demonstrated a promising and sustainable method.

BIORESOURCE TECHNOLOGY (2022)

Article Engineering, Environmental

Complete conversion of lignocellulosic biomass into three high-value nanomaterials through a versatile integrated technical platform

Dong Tian et al.

Summary: An integrated technique combining hydrothermal pretreatment and deep eutectic solvent (DES) extraction was developed to fractionate lignocellulose into three usable forms, which were further upgraded to three nanomaterials. This platform realized the complete utilization of lignocellulosic biomass and provided high-value nanomaterials for industrial applications.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Environmental Sciences

Biosorption of V(V) onto Lantana camara biochar modified by H3PO4: Characteristics, mechanism, and regenerative capacity

Kexin Chen et al.

Summary: This study investigates the adsorption of vanadium by biochar prepared from an invasive plant species. The results show that H3PO4 activated biochar has a high adsorption capacity for V(V), and the adsorption process is pH-dependent. The primary mechanisms for V(V) adsorption on activated biochar are electrostatic interaction, complexation reaction, and redox reaction.

CHEMOSPHERE (2022)

Article Engineering, Environmental

Efficient removal of uranium from wastewater using pig manure biochar: Understanding adsorption and binding mechanisms

Jun Liao et al.

Summary: This study obtained three kinds of biochars with excellent adsorption performance towards UVI by carbonizing pig manure pre-treated with different agents, among which PMBC-PP and PMBC-HP showed significantly higher adsorption capacities compared to PMBC-H2O, with potassium permanganate pretreatment leading to a higher enhancement.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Materials Science, Multidisciplinary

Effect of freezing pretreatment on the performance of activated carbon from coconut shell for supercapacitor application

Meigen Deng et al.

Summary: Freezing pretreatment was used on coconut shell to increase the specific surface area and total pore volume of the pyrolysed carbon, resulting in better performance of the activated carbon with larger specific surface area, wider average pore diameter, higher specific capacitance, and improved power performance compared to traditional activated carbon.

MATERIALS LETTERS (2022)

Article Environmental Sciences

Resource utilization of rice husk biomass: Preparation of MgO flake-modified biochar for simultaneous removal of heavy metals from aqueous solution and polluted soil

Anyu Li et al.

Summary: This study used metal-oxide modified biochar to simultaneously remediate and remove heavy metals in soil and wastewater. The results showed that the modified biochar had strong adsorption capacity for various heavy metals and could effectively reduce their concentrations in soil and wastewater. The addition of modified biochar also facilitated the transformation and immobilization of heavy metals. This study provides efficient functional materials for the remediation of heavy metal pollution.

ENVIRONMENTAL POLLUTION (2022)

Article Green & Sustainable Science & Technology

Enhanced adsorption capacity of cellulose hydrogel based on corn stalk for pollutants removal and mechanism exploration

Changyang Lei et al.

Summary: In this study, water-soluble polysaccharides were used to enhance the adsorption capacity of cellulose hydrogel, forming composite hydrogels by crosslinking with corn stalk cellulose. The modified hydrogels showed improved specific surface area, water retention capacity, and thermal resistance. The method provides a way for wastewater treatment and enhances the adsorption capacity of methylene blue, lead ions, and tetracycline.

JOURNAL OF CLEANER PRODUCTION (2022)

Article Environmental Sciences

Adsorption performance and mechanism of cationic and anionic dyes by KOH activated biochar derived from medical waste pyrolysis

Fahim Ullah et al.

Summary: The massive generation of medical waste leads to various environmental, social, and ecological problems. This study focuses on the use of pyrolysis and activation to obtain activated biochar from medical waste and investigates its adsorption mechanism and properties for dyes. The results show that activated biochar has excellent potential for adsorbing both cationic and anionic dyes, making it an economical and efficient adsorbent.

ENVIRONMENTAL POLLUTION (2022)

Article Environmental Sciences

Influence of pyrolysis temperature on biochar properties and Cr(VI) adsorption from water with groundnut shell biochars: Mechanistic approach

Amita Shakya et al.

Summary: This study found that the pyrolysis temperature is a key factor affecting the Cr(VI) removal potential of groundnut shell biochars, and pH is a significant parameter determining the adsorption potential. As the pyrolysis temperature increased, the adsorption capacity of the biochars decreased.

ENVIRONMENTAL RESEARCH (2022)

Article Environmental Sciences

Techno-economic analysis reveals the untapped potential of wood biochar

Josef Marousek et al.

Summary: Infested wood can be processed into wood biochar via mobile pyrolysis units, which is a good option for fire prevention and has advantages in increasing plant-available water content in soil and recycling nutrients. Wood biochar can promote soil microbial communities and has positive effects on soil fertility. With increasing damage to forest cover due to climate change, wood biochar represents untapped potential in soil, nutrient, and energy management.

CHEMOSPHERE (2022)

Article Environmental Sciences

Impacts of temperatures and phosphoric-acid modification to the physicochemical properties of biochar for excellent sulfadiazine adsorption

Xue-Yu Zeng et al.

Summary: This study investigated the properties of phosphoric acid-modified biochars (PABCs) prepared at different pyrolysis temperatures. PABCs prepared at higher temperatures had a higher proportion of micropores and showed improved adsorption capacity and rate for sulfadiazine (SDZ). The enhancement in adsorption was attributed to the confinement effect of hydrophobic cavities from the microporous structure and the pi-pi electron-donor-acceptor interaction. PABCs exhibited stable adsorption capacities at a wide pH range or high concentrations of coexisting ions.

BIOCHAR (2022)

Article Agricultural Engineering

Hydrothermal synthesis of magnetic sludge biochar for tetracycline and ciprofloxacin adsorptive removal

Yongfei Ma et al.

Summary: The study demonstrated that biochar derived from municipal sludge activated by zinc chloride can be used as Fe/Zn-SBC with high adsorption capacity for tetracycline and ciprofloxacin. Fe/Zn-SBC is primarily influenced by pore filling, oxygen-containing groups complexation, pi-pi conjugation, and hydrogen bonding during the adsorption process, exhibiting high selective adsorption capacity.

BIORESOURCE TECHNOLOGY (2021)

Article Thermodynamics

Clean solid fuel produced from cotton textiles waste through hydrothermal carbonization with FeCl3: Upgrading the fuel quality and combustion characteristics

Renzhi Qi et al.

Summary: FeCl3-catalyzed HTC process with CTW can produce hydrochars with improved thermal characteristics and combustion properties, promote the formation of high value-added byproducts, and potentially provide a better combustion performance for solid fuels.

ENERGY (2021)

Article Agricultural Engineering

Lignin-derived sulfonated porous carbon from cornstalk for efficient and selective removal of cationic dyes

Shiyun Zhu et al.

Summary: This study prepared a highly efficient and selective lignin-derived sulfonated porous carbon (LSPC) adsorbent from cornstalk, which showed outstanding selectivity for rapid removal of cationic dyes from dye effluents. The LSPC demonstrated great pH responsiveness and excellent regenerated property, indicating its potential for selective adsorption and recycle of cationic dyes in water treatment.

INDUSTRIAL CROPS AND PRODUCTS (2021)

Article Environmental Sciences

In situ characterization of functional groups of biochar in pyrolysis of cellulose

Mengjiao Fan et al.

Summary: This study investigated the transformation of functional groups of biochar at different heating rates, revealing that the abundance of -OH, C\\H, and C_O in biochar peaked at 410-450 degrees Celsius before decreasing with further temperature increase. The formation of =C-H was closely correlated with the removal of -C-H and -OH, while cracking of C_O was a decisive factor for the formation of C_C in biochar.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Article Engineering, Environmental

Enhanced adsorptive removal of sulfamethoxazole from water using biochar derived from hydrothermal carbonization of sugarcane bagasse

G. Prasannamedha et al.

Summary: The research focused on producing biochar from sugarcane bagasse through HTC followed by NaOH activation to remove SMX from water. The biochar had a sphere-shaped structure with hydrophobic interior and hydrophilic exterior, with a large surface area and mesopores structure. The adsorption process involved chemical interaction following Elovich model and fit well with Freundlich model. Immobilization of SMX on the biochar surface was achieved through charge-assisted hydrogen bonding and pi-pi interaction.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Environmental Sciences

An overview on engineering the surface area and porosity of biochar

Lijian Leng et al.

Summary: Surface area and porosity are crucial physical properties of biochar that significantly impact its applications, with biomass composition and pyrolysis temperature being major influencing factors. Activation, particularly through chemical means, is the most effective way to enhance biochar surface area and porosity, while other treatment methods like carbonaceous materials coating and ball milling can also contribute to improvement. Future research should focus on developing treatment technologies to simultaneously enhance the functionality and porous structure of biochar.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Review Engineering, Chemical

On the effects of freeze-drying processes on the nutritional properties of foodstuff: A review

Maite Harguindeguy et al.

DRYING TECHNOLOGY (2020)

Article Multidisciplinary Sciences

Removal of aqueous Cr(VI) by magnetic biochar derived from bagasse

Meina Liang et al.

SCIENTIFIC REPORTS (2020)

Review Engineering, Chemical

Chemical activation of biochar for energy and environmental applications: a comprehensive review

Baharak Sajjadi et al.

REVIEWS IN CHEMICAL ENGINEERING (2019)

Article Chemistry, Multidisciplinary

High Performance Lithium-Sulfur Batteries with a Sustainable and Environmentally Friendly Carbon Aerogel Modified Separator

Lin Zhu et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Article Engineering, Environmental

Removal of 17 beta-estradiol by using highly adsorptive magnetic biochar nanoparticles from aqueous solution

Xinwei Dong et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Article Environmental Sciences

Effects of ionic strength and fulvic acid on adsorption ofTb(III) and Eu(III) onto clay

Maria Poetsch et al.

JOURNAL OF CONTAMINANT HYDROLOGY (2016)

Article Thermodynamics

Analysis of Czech Subsidies for Solid Biofuels

Anna Mardoyan et al.

INTERNATIONAL JOURNAL OF GREEN ENERGY (2015)

Article Environmental Sciences

Economically oriented process optimization in waste management

Josef Marousek

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2014)

Review Green & Sustainable Science & Technology

A review on pyrolysis of biomass constituents: Mechanisms and composition of the products obtained from the conversion of cellulose, hemicelluloses and lignin

Francois-Xavier Collard et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)

Article Engineering, Environmental

Impact of Deashing Treatment on Biochar Structural Properties and Potential Sorption Mechanisms of Phenanthrene

Ke Sun et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2013)