相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Investigation into the influence of boronizing on the wear behavior of additively manufactured Inconel 625 alloy at elevated temperature
A. Gunen et al.
PROGRESS IN ADDITIVE MANUFACTURING (2023)
A new approach to improve some properties of wire arc additively manufactured stainless steel components: Simultaneous homogenization and boriding
Ali Gunen et al.
SURFACE & COATINGS TECHNOLOGY (2023)
A comparative study on drillability of Inconel 625 alloy fabricated by wire arc additive manufacturing
Ferhat Ceritbinmez et al.
JOURNAL OF MANUFACTURING PROCESSES (2023)
Prospects of producing aluminum parts by wire arc additive manufacturing (WAAM)
Gurel Cam
MATERIALS TODAY-PROCEEDINGS (2022)
Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review
Niloofar Sanaei et al.
PROGRESS IN MATERIALS SCIENCE (2021)
Effects of process parameters and cooling gas on powder formation during the plasma rotating electrode process
Yujie Cui et al.
POWDER TECHNOLOGY (2021)
Mechanical and microstructural characterization of functionally graded Inconel 825-SS316L fabricated using wire arc additive manufacturing
T. S. Senthil et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Low carbon, high efficiency and sustainable production of traditional manufacturing methods through process design strategy: Improvement process for sand casting defects
Jun Zheng et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Metal additive manufacturing: Technology, metallurgy and modelling
Shaun Cooke et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Review of microstructure and properties of low temperature lead-free solder in electronic packaging
Kai-Kai Xu et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2020)
Synthesis and Characterization of Graphene Filled PC-ABS Filament for FDM Applications
Vijay Tambrallimath et al.
ADVANCES IN POLYMER COMPOSITES: MECHANICS, CHARACTERIZATION AND APPLICATIONS (2019)
Effect of Aluminum Particles on the Fracture Toughness of Polyamide-based Parts Obtained by Selective Laser Sintering (SLS)
Dan Ioan Stoia et al.
25TH INTERNATIONAL CONFERENCE ON FRACTURE AND STRUCTURAL INTEGRITY (2019)
Effect of fused deposition modelling (FDM) process parameters on tensile strength of carbon fibre PLA
V. Durga Prasada Rao et al.
MATERIALS TODAY-PROCEEDINGS (2019)
Additive Manufacturing of PLA and CF/PLA Binding Layer Specimens via Fused Deposition Modeling
Yuhang Li et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
A phase-field model for solid-state selective laser sintering of metallic materials
Xing Zhang et al.
POWDER TECHNOLOGY (2018)
Nitinol powders generate from Plasma Rotation Electrode Process provide clean powder for biomedical devices used with suitable size, spheroid surface and pure composition
Tai-I Hsu et al.
SCIENTIFIC REPORTS (2018)
Melt pool temperature and cooling rates in laser powder bed fusion
Paul A. Hooper
ADDITIVE MANUFACTURING (2018)
Performance evaluation of warping characteristic of fused deposition modelling process
Biranchi N. Panda et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Impact of the Fused Deposition (FDM) Printing Process on Polylactic Acid (PLA) Chemistry and Structure
Michael Arthur Cuiffo et al.
APPLIED SCIENCES-BASEL (2017)
Direct 3D bioprinting of perfusable vascular constructs using a blend bioink
Weitao Jia et al.
BIOMATERIALS (2016)
Preparation of a defect-free alumina cutting tool via additive manufacturing based on stereolithography - Optimization of the drying and debinding processes
Maopeng Zhou et al.
CERAMICS INTERNATIONAL (2016)
Characterization of ceramic components fabricated using binder jetting additive manufacturing technology
J. A. Gonzalez et al.
CERAMICS INTERNATIONAL (2016)
Microstructure and mechanical properties of selective laser melted Inconel 718 compared to forging and casting
Tanja Trosch et al.
MATERIALS LETTERS (2016)
A comparative study of additive manufacturing techniques: Residual stress and microstructural analysis of CLAD and WAAM printed Ti-6Al-4V components
Blanka A. Szost et al.
MATERIALS & DESIGN (2016)
A comparative study of Inconel 718 formed by High Deposition Rate Laser Metal Deposition with GA powder and PREP powder
Chongliang Zhong et al.
MATERIALS & DESIGN (2016)
The cost of additive manufacturing: machine productivity, economies of scale and technology-push
Martin Baumers et al.
TECHNOLOGICAL FORECASTING AND SOCIAL CHANGE (2016)
Process planning for additive and subtractive manufacturing technologies
Stephen T. Newman et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2015)
A comparison between the hydrodynamic characteristics of 3D-printed polymer and etched silicon microchannels
John O'Connor et al.
MICROFLUIDICS AND NANOFLUIDICS (2015)
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
E. O. Olakanmi et al.
PROGRESS IN MATERIALS SCIENCE (2015)
Effects of build orientation and heat treatment on the microstructure and mechanical properties of selective laser melted Ti6Al4V lattice structures
Ruben Wauthle et al.
ADDITIVE MANUFACTURING (2015)
Metal Additive Manufacturing: A Review
William E. Frazier
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Additive manufacturing of lightweight, fully Al-based components using quasicrystals
Samuel Kenzari et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder
Yali Li et al.
MATERIALS & DESIGN (2014)
Development of an in-situ multi-component reinforced Al-based metal matrix composite by direct metal laser sintering technique-Optimization of process parameters
Subrata Kumar Ghosh et al.
MATERIALS CHARACTERIZATION (2014)
Selective laser melting of an Al86Ni6Y4.5Co2La1.5 metallic glass: Processing, microstructure evolution and mechanical properties
X. P. Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Nanocasting Technique to Prepare Lotus-leaf-like Superhydrophobic Electroactive Polyimide as Advanced Anticorrosive Coatings
Kung-Chin Chang et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Effects of binders on dimensional accuracy and mechanical properties of SiC particulates preforms fabricated by selective laser sintering
Huaping Xiong et al.
COMPOSITES PART B-ENGINEERING (2013)
Surface modification of recycled carbon fiber and its reinforcement effect on nylon 6 composites: Mechanical properties, morphology and crystallization behaviors
Nan Feng et al.
CURRENT APPLIED PHYSICS (2013)
Experimental study on cutting temperature and cutting force in dry turning of titanium alloy using a non-coated micro-grooved tool
J. Xie et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)
Microstructural and mechanical characterization of injection molded 718 superalloy powders
Ozgur Ozgun et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Selective laser sintering/melting (SLS/SLM) of pure Al, Al-Mg, and Al-Si powders: Effect of processing conditions and powder properties
E. O. Olakanmi
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Ice-templating, freeze casting: Beyond materials processing
Sylvain Deville
JOURNAL OF MATERIALS RESEARCH (2013)
Influence of hot isostatic pressing temperature on microstructure and tensile properties of a nickel-based superalloy powder
C. L. Qiu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Structural characteristics of fused deposition modeling polycarbonate material
Walter Castro Smith et al.
POLYMER TESTING (2013)
Effect of organic additives on synthesis of copper nano powders by pulsing electrolysis
Rasoul Khayyam Nekouie et al.
POWDER TECHNOLOGY (2013)
Preparation of water-soluble nanographite and its application in water-based cutting fluid
Qiang Chen et al.
NANOSCALE RESEARCH LETTERS (2013)
Additive manufacturing: technology, applications and research needs
Nannan Guo et al.
FRONTIERS OF MECHANICAL ENGINEERING (2013)
The Production of Titanium Alloy Powder
J. C. Withers et al.
COST-AFFORDABLE TITANIUM IV (2013)
Modification and Characteristics of Biodegradable Polymer Suitable for Selective Laser Sintering
Pil-Ho Lee et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2013)
Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting
K. N. Amato et al.
ACTA MATERIALIA (2012)
Preparation and indirect selective laser sintering of alumina/PA microspheres
Khuram Shahzad et al.
CERAMICS INTERNATIONAL (2012)
Additive Manufacturing for product improvement at Red Bull Technology
David E. Cooper et al.
MATERIALS & DESIGN (2012)
Morphology, microstructure, and hardness of titanium (Ti-6Al-4V) blocks deposited by wire-feed additive layer manufacturing (ALM)
Erhard Brandl et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
A comparative study of four modified Al coatings on Ni3Al-based single crystal superalloy
Qiong Wu et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2011)
Preparation of HBWSL-1 Type Photosensitive Resin for Stereolithography and Study on the Accuracy of Its Fabricated Parts
Biwu Huang et al.
ADVANCED MATERIALS, PTS 1-4 (2011)
A study of the micro structural evolution during selective laser melting of Ti-6Al-4V
Lore Thijs et al.
ACTA MATERIALIA (2010)
Impact fracture behaviour of nylon 6-based ternary nanocomposites
Szu-Hui Lim et al.
COMPOSITES PART B-ENGINEERING (2010)
Chatter Stability in Turning and Milling with in Process Identified Process Damping
Yusuke Kurata et al.
JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING (2010)
DSC analysis of Al6061 aluminum alloy powder by rapid solidification
Antonyraj Arockiasamy et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2010)
Dimensional error of selective laser sintering, three-dimensional printing and PolyJet™ models in the reproduction of mandibular anatomy
Danilo Ibrahim et al.
JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2009)
Preparation of AlN powder by Microwave Carbon Thermal Reduction
Xiao Jin et al.
JOURNAL OF INORGANIC MATERIALS (2009)
Investigation into the use of gaseous and liquid nitrogen as a cutting fluid when turning BS 970-80A15 (En32b) plain carbon steel using WC-Co uncoated tooling
M. Stanford et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Colloidal Processing of Glass-Ceramics for Laminated Object Manufacturing
Cynthia M. Gomes et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2009)
Study on the machinability characteristics of superalloy Inconel 718 during high speed turning
D. G. Thakur et al.
MATERIALS & DESIGN (2009)
A review of process development steps for new material systems in three dimensional printing (3DP)
Ben Utela et al.
Journal of Manufacturing Processes (2009)
Fatigue properties of a metastable β-type titanium alloy with reversible phase transformation
S. J. Li et al.
ACTA BIOMATERIALIA (2008)
A base function for generating contour traversal paths in stereolithography apparatus applications
Shuo-Yan Chou et al.
EXPERT SYSTEMS WITH APPLICATIONS (2008)
Effects of microstructure on room temperature fatigue crack initiation and short crack propagation in Udimet 720Li Ni-base superalloy
H. T. Pang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2008)
Dimensional error in selective laser sintering and 3D-printing of models for craniomaxillary anatomy reconstruction
Daniela Nascimento Silva et al.
JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2008)
Experimental studies on selective laser melting of metallic parts
H. Meier et al.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2008)
Research on the microstructure and properties of weld repairs in TA15 titanium alloy
Liu Liming et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
In situ fabrication of Al-TiC metal matrix composites by reactive slag process
S. Sheibani et al.
MATERIALS & DESIGN (2007)
Characterization of an aluminum-filled polyamide powder for applications in selective laser sintering
Alida Mazzoli et al.
MATERIALS & DESIGN (2007)
Effect of oxygen content of powder on microstructure and mechanical properties of hot isostatically pressed superalloy Inconel 718
G. Appa Rao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Prevention of lap formation in near net shape isothermal forging technology of part of irregular shape made of aluminium alloy A92618
P. Petrov et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Partial melting and resolidification of metal powder in selective laser sintering
Bin Xiao et al.
JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER (2006)
A review of laser welding techniques for magnesium alloys
X Cao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Effect of carbon on microstructure and mechanical properties of a eutectoid β titanium alloy
M Chu et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2005)
Microstructure and tensile properties of Inconel 718 pulsed Nd-YAG laser welds
GDJ Ram et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Deformation characteristics of isothermally forged UDIMET 720 nickel-base superalloy
H Monajati et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)
On the micro-drilling and turning performance of TiN/AlN nano-multilayer films
SH Yao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Binding mechanisms in selective laser sintering and selective laser melting
JP Kruth et al.
RAPID PROTOTYPING JOURNAL (2005)
Recent developments in micromilling using focused ion beam technology
AA Tseng
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2004)
Selective laser sintering characteristics of nylon 6/clay-reinforced nanocomposite
J Kim et al.
POLYMER TESTING (2004)
Selective laser melting of iron-based powder
JP Kruth et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Optimum part deposition orientation in fused deposition modeling
K Thrimurthulu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)
Development of new metal/polymer materials for rapid tooling using Fused deposition modelling
SH Masood et al.
MATERIALS & DESIGN (2004)
Selective laser sintering: A qualitative and objective approach
S Kumar
JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY (2003)
A new approach of online waste removal process for laminated object manufacturing (LOM)
YS Liao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Lasers and materials in selective laser sintering
JP Kruth et al.
ASSEMBLY AUTOMATION (2003)
The laser welding technique applied to the non precious dental alloys procedure and results
C Bertrand et al.
BRITISH DENTAL JOURNAL (2001)
分享论文
