☆ 4.5 Article

A novel analytical model for evaluating the time-varying meshing stiffness of helical gears under irregular pitting failure

ARCHIVE OF APPLIED MECHANICS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

A new analytical model for evaluating the time-varying mesh stiffness of helical gears in healthy and spalling cases

Xiao Wu et al.

Summary: Accurately evaluating the time-varying mesh stiffness (TVMS) of helical gears with tooth spalls with curved-bottom features is crucial for gear vibration dynamic simulation. The proposed method in this paper corrects foundation stiffness errors and considers the influence of axial mesh forces, showing effectiveness in modeling tooth spalls with curved-bottom features for helical gears.

ENGINEERING FAILURE ANALYSIS (2022)

添加到收藏夹

Article Engineering, Mechanical

An improved mesh stiffness calculation model for cracked helical gear pair with spatial crack propagation path

Siyu Wang et al.

Summary: This study focuses on the gear crack in helical gear pair, and introduces improved models for spatial crack propagation paths and limiting line to characterize the crack effect. The influence of crack parameters and types on the time varying mesh stiffness of helical gear pair is also investigated.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

添加到收藏夹

Article Engineering, Mechanical

Dynamic modeling of the gear-rotor systems with spatial propagation crack and complicated foundation structure

Kangkang Chen et al.

Summary: Considering both spatial crack fault and complex foundation structure, this study establishes a dynamic finite element model and multi-body dynamic model to analyze the dynamic characteristics of gear-rotor systems. The research uses the extended finite element method to simulate the three-dimensional crack propagation paths of spur gears under partial load, calculates the mesh stiffness of spur gears with the spatial crack and complex foundation using the proposed three-dimensional loaded tooth contact analysis (3D-LTCA) method, and verifies the results with the finite element method. The dynamic responses of the gear-rotor system under different crack levels are analyzed, and the advantages and disadvantages of these two dynamic models are evaluated. The study finds that the 3D-LTCA can accurately consider the influence of complex foundation and spatial crack on mesh stiffness, and the finite element model and multi-body dynamic model can effectively analyze the influence of crack fault and foundation structure on dynamic responses.

MECHANISM AND MACHINE THEORY (2022)

添加到收藏夹

Article Engineering, Mechanical

Computational study of pitting defect influence on mesh stiffness for straight beveloid gear

Ruihua Sun et al.

Summary: This study introduces an efficient slice-based mesh stiffness modeling method for straight beveloid gear pair, considering the deformation of tooth fillet and transient curve part to improve calculation accuracy. Results show that the size and location of pitting defects significantly affect mesh stiffness, while the distance between pitting corrosion center and transverse plane has little influence on mesh stiffness.

ENGINEERING FAILURE ANALYSIS (2021)

添加到收藏夹

Article Engineering, Mechanical

A study of effects of tooth surface wear on time-varying mesh stiffness of external spur gear considering wear evolution process

Wei Chen et al.

Summary: This study evaluates the impact of tooth surface wear on gear mesh stiffness, considering wear evolution process. Numerical results show that wear can lead to significant reductions in mesh stiffness, and the mean decrease of stiffness is almost proportional to the maximum tooth wear in the initial wear evolution process.

MECHANISM AND MACHINE THEORY (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

A new mesh stiffness model for modified spur gears with coupling tooth and body flexibility effects

Chongyang Xie et al.

Summary: Mesh stiffness calculation is crucial for gear dynamic analysis, and the influence of gear body flexibility and tooth profile error poses a challenge in modeling. A new mesh stiffness model is proposed in this paper to address this issue, which considers both gear body coupling flexibility and the impact of tooth profile error, validated by the finite element method.

APPLIED MATHEMATICAL MODELLING (2021)

添加到收藏夹

Article Acoustics

A flexible-helical-geared rotor dynamic model based on hybrid beam-shell elements

Yifan Huangfu et al.

Summary: A dynamic model for thin-rimmed helical gears is established considering flexibility of gear foundations and rotational effects, using Timoshenko beam elements and Mindlin-Reissner shell elements. The model is verified through comparison with experimental results and discusses the effects of various factors on dynamic behaviors. The results show differences between traditional and proposed models, emphasizing the importance of flexible body modeling.

JOURNAL OF SOUND AND VIBRATION (2021)

添加到收藏夹

Article Engineering, Mechanical

Evaluation model of mesh stiffness for spur gear with tooth tip chipping fault

Yinghui Liu et al.

Summary: In this study, failure models of tooth tip chipping for both internal gear and external gear are established by means of analytic geometry method. The fracture curve equation is derived using analytic geometry method, and the mesh stiffness of the fault gear is derived via potential energy method and verified by the finite element method. The proposed model can accurately evaluate the mesh stiffness of gears with tooth tip chipping, and the modeling method can also be applied to other fault types.

MECHANISM AND MACHINE THEORY (2021)

添加到收藏夹

Review Engineering, Mechanical

A critical review on FE-based methods for mesh stiffness estimation in spur gears

Caterina Natali et al.

Summary: Various methodologies for calculating mesh stiffness in spur gears have been reviewed, with a focus on three most commonly used methods. A critical analysis of these methods was conducted, emphasizing key aspects of the mesh stiffness estimation process. Comparison of the methods in terms of accuracy and computational time, and the introduction of two variants of a hybrid method were also presented, with the goal of providing guidelines for selecting the most suitable approach based on specific requirements.

MECHANISM AND MACHINE THEORY (2021)

添加到收藏夹

Article Acoustics

Cyclostationary modeling for local fault diagnosis of planetary gear vibration signals

Ruo-Bin Sun et al.

JOURNAL OF SOUND AND VIBRATION (2020)

添加到收藏夹

Article Engineering, Mechanical

Planetary gearbox spectral modeling based on the hybrid method of dynamics and LSTM

Ruo-Bin Sun et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

添加到收藏夹

Review Engineering, Multidisciplinary

Latest developments in gear defect diagnosis and prognosis: A review

Anil Kumar et al.

MEASUREMENT (2020)

添加到收藏夹

Article Engineering, Mechanical

Improved analytical calculation model of spur gear mesh excitations with tooth profile deviations

Zaigang Chen et al.

MECHANISM AND MACHINE THEORY (2020)

添加到收藏夹

Article Engineering, Mechanical

New approach for gear mesh stiffness evaluation of spur gears with surface defects

Bilal El Yousfi et al.

ENGINEERING FAILURE ANALYSIS (2020)

添加到收藏夹

Article Materials Science, Characterization & Testing

A novel evolution model of pitting failure and effect on time -varying meshing stiffness of spur gears

Zong Meng et al.

ENGINEERING FAILURE ANALYSIS (2020)

添加到收藏夹

Review Engineering, Mechanical

Gear fault models and dynamics-based modelling for gear fault detection - A review

Omar D. Mohammed et al.

ENGINEERING FAILURE ANALYSIS (2020)

添加到收藏夹

Article Engineering, Mechanical

A shape-independent approach to modelling gear tooth spalls for time varying mesh stiffness evaluation of a spur gear pair

Yang Luo et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

添加到收藏夹

Article Engineering, Mechanical

Comparison of meshing characteristics of helical gears with spalling fault using analytical and finite-element methods

Kangkang Chen et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

添加到收藏夹

Article Engineering, Mechanical

A novel distribution model of multiple teeth pits for evaluating time-varying mesh stiffness of external spur gears

Taoyuan Chen et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

添加到收藏夹

Article Engineering, Mechanical

Deformation and meshing stiffness analysis of cracked helical gear pairs

Yifan Huangfu et al.

ENGINEERING FAILURE ANALYSIS (2019)

添加到收藏夹

Article Engineering, Mechanical

Evaluation of the time-varying mesh stiffness for gears with tooth spalls with curved-bottom features

Yang Luo et al.

ENGINEERING FAILURE ANALYSIS (2018)

添加到收藏夹

Article Engineering, Mechanical

A probability distribution model of tooth pits for evaluating time-varying mesh stiffness of pitting gears

Yaguo Lei et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

添加到收藏夹

Article Engineering, Mechanical

Three new models for evaluation of standard involute spur gear mesh stiffness

Xihui Liang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

添加到收藏夹

Article Engineering, Mechanical

A study of nonlinear excitation modeling of helical gears with Modification: Theoretical analysis and experiments

Jing Wei et al.

MECHANISM AND MACHINE THEORY (2018)

添加到收藏夹

Article Engineering, Mechanical

An analytical-finite-element method for calculating mesh stiffness of spur gear pairs with complicated foundation and crack

Qibin Wang et al.

ENGINEERING FAILURE ANALYSIS (2018)

添加到收藏夹

Article Engineering, Mechanical

Analytical formulas for gear body-induced tooth deflections of spur gears considering structure coupling effect

Chongyang Xie et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

添加到收藏夹

Article Engineering, Mechanical

Improved analytical methods for calculation of gear tooth fillet-foundation stiffness with tooth root crack

Zaigang Chen et al.

ENGINEERING FAILURE ANALYSIS (2017)

添加到收藏夹

Article Engineering, Mechanical

Time-varying mesh stiffness calculation of spur gears with spalling defect

Hui Ma et al.

ENGINEERING FAILURE ANALYSIS (2016)

添加到收藏夹

Article Engineering, Mechanical

Time varying mesh stiffness calculation of spur gear pair considering sliding friction and spalling defects

Ankur Saxena et al.

ENGINEERING FAILURE ANALYSIS (2016)

添加到收藏夹

Article Engineering, Mechanical

Analytical model for mesh stiffness calculation of spur gear pair with non-uniformly distributed tooth root crack

Zaigang Chen et al.

ENGINEERING FAILURE ANALYSIS (2016)

添加到收藏夹

Article Engineering, Mechanical

The influence of tooth pitting on the mesh stiffness of a pair of external spur gears

Xihui Liang et al.

MECHANISM AND MACHINE THEORY (2016)

添加到收藏夹

Review Engineering, Mechanical

Review on dynamics of cracked gear systems

Hui Ma et al.

ENGINEERING FAILURE ANALYSIS (2015)

添加到收藏夹

Article Engineering, Mechanical

Dynamic characteristics of helical gears under sliding friction with spalling defect

Hanjun Jiang et al.

ENGINEERING FAILURE ANALYSIS (2014)

添加到收藏夹

Article Engineering, Mechanical

A micro-pitting model for spur gear contacts

Sheng Li et al.

INTERNATIONAL JOURNAL OF FATIGUE (2014)

添加到收藏夹

Article Engineering, Mechanical

Analytically evaluating the influence of crack on the mesh stiffness of a planetary gear set

Xihui Liang et al.

MECHANISM AND MACHINE THEORY (2014)

添加到收藏夹

Article Engineering, Mechanical

Mesh stiffness calculation of a spur gear pair with tooth profile modification and tooth root crack

Zaigang Chen et al.

MECHANISM AND MACHINE THEORY (2013)

添加到收藏夹

Article Mechanics

Effect of spalling or tooth breakage on gearmesh stiffness and dynamic response of a one-stage spur gear transmission

Fakher Chaari et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2008)

添加到收藏夹

Article Engineering, Mechanical

A comparative experimental study on the diagnostic and prognostic capabilities of acoustics emission, vibration and spectrometric oil analysis for spur gears

Chee Keong Tan et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2007)

添加到收藏夹

Article Engineering, Mechanical

Comparison of localised spalling and crack damage from dynamic modelling of spur gear vibrations

SX Jia et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.