4.7 Article

Studying the performance of phase change heat storage enhanced by ultrasonic energy

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Thermodynamics

Numerical analysis of latent thermal energy storage system under double spirally coiled tube configuration with two separated paths

Shahin Faghiri et al.

Summary: This study uses a reliable 3D numerical simulation to investigate the charging process of paraffin as the phase change material in a double spirally coiled tube heat exchanger with two separated paths. The effects of operational and geometrical factors on the behavior of the latent thermal energy storage system during the melting process are analyzed. The results show that reducing the radius of the inner spiral tube decreases the melting capability of PCM at the beginning of the charging process but improves efficiency at later stages. The overall time required for 95 wt% PCM melting in the storage decreases by 126% when the radius of the inner spiral tube is reduced from 90 mm to 50 mm.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2023)

Article Energy & Fuels

Combined effects of nanoparticles and ultrasonic field on thermal energy storage performance of phase change materials with metal foam

Wei Cui et al.

Summary: This study proposed a novel method to enhance the performance of thermal energy storage (TES) system with phase change materials (PCMs) by adding TiO2 nanoparticles, metal foam, and applying ultrasonic field. The results showed that TiO2 nanoparticles and ultrasonic field positively improved the TES rate but negatively reduced the TES efficiency. Considering the relationship between TES rate and TES efficiency is important in designing TES systems.

APPLIED ENERGY (2022)

Review Thermodynamics

A review on convective heat transfer enhancement using ultrasound

Maryam Dehbani et al.

Summary: Heat transfer is crucial in industrial applications, and researchers have been interested in finding methods to increase its rate and equipment efficiency. Ultrasound, with its unique phenomena like acoustic cavitation and acoustic streaming, has been proven highly efficient in enhancing convective heat transfer. This paper summarizes recent research on the applications of ultrasound interference in free and forced convection heat transfer systems.

APPLIED THERMAL ENGINEERING (2022)

Article Mechanics

Combined effects of buoyancy and electric forces on non-isothermal melting of a dielectric phase change material

R. Deepak Selvakumar et al.

Summary: In this study, numerical simulations were conducted to investigate the non-isothermal melting process of a dielectric phase change material under the combined influence of buoyancy and electric forces. The results showed that the melting rate curve deviates when an electric field is applied, indicating a transition from natural convection dominated melting to electroconvection dominated melting. Electrohydrodynamics enhances the mixing in the liquid region and compliments the buoyancy driven flow.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2022)

Article Green & Sustainable Science & Technology

Utilize mechanical vibration energy for fast thermal responsive PCMs-based energy storage systems: Prototype research by numerical simulation

Yang Yu et al.

Summary: This study proposes a new method to improve the thermal responsive rate of PCMs-based energy storage systems by combining the use of a fin and mechanical vibration. Numerical simulations reveal that a moderate vibration frequency and optimal fin length can effectively accelerate the charging processes.

RENEWABLE ENERGY (2022)

Article Energy & Fuels

Nanoparticle surface charge-enhanced heat capacity in molten salt phase change materials for thermal energy storage

H. R. Wen et al.

Summary: This study investigates the mechanism of specific heat enhancement in molten salts with SiO2 nanoparticles. Molecular dynamics simulations reveal an orderly layered distribution of ions near the nanoparticle surface due to surface charges, leading to higher electrostatic potential energies. The enhanced thermal expansion coefficient caused by the same charge layers expanding more easily when the temperature rises is found to be the main reason for the specific heat enhancement. Experimental results confirm the enhancement in specific heat and the enrichment of charged functional groups on the nanoparticle surface. Coating active functional groups such as hydroxyl groups on the surface can significantly enhance the specific heat.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

Article Thermodynamics

Proposing novel L shaped fin to boost the melting performance of a vertical PCM enclosure

Gaoliang Wang et al.

Summary: Vertical PCM enclosures are commonly used in various applications. This study found that the orientation and dimensions of L shaped fins significantly affect melting performance, energy storage, and exergy of the enclosure. The best case was identified as a fin mounted at the lower side of the enclosure, leading to a 45% enhancement in melting time.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Review Green & Sustainable Science & Technology

Recent development on heat transfer and various applications of phase-change materials

Liu Yang et al.

Summary: PCMs have great potential in reducing energy consumption and environmental pollution in various applications, but face challenges such as high cost, potential harmful effects of nanoparticles on humans and the environment, and durability after long-term use. Solutions need to be explored to address these challenges and promote the further development of PCM technology.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Thermodynamics

Ultrasound-assisted enhancement of heat transfer in immersed coil heat exchangers: Effects of acoustic intensity and ambient fluid properties

Weixiang Lin et al.

Summary: This paper numerically studied the heat transfer enhancement induced by ultrasound in immersed coil heat exchangers, showing significant effects of factors such as acoustic intensity, ambient pressure, and fluid flow velocity on the heat transfer enhancement. The research evaluates the influence of acoustic intensity and ambient fluid properties on acoustic streaming and acoustic cavitation, providing guidance in the utilization of ultrasound in heat exchangers.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Article Energy & Fuels

Recent advances in thermophysical properties enhancement of phase change materials for thermal energy storage

K. Kant et al.

Summary: Phase change materials (PCM) have the potential to store thermal energy at a constant temperature, but they have limitations such as low phase change enthalpy and poor specific heat. Improving the thermophysical properties of PCMs is essential for efficient thermal energy storage.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)

Article Acoustics

Enhancement of heat transfer in forced convection by using dual low-high frequency ultrasound

Christophe Poncet et al.

Summary: The study investigates the combined use of dual-frequency ultrasound with sonication to enhance heat transfer in forced convection. Results show a synergistic effect with greater induced turbulence and heat transfer enhancement along the heating wall when compared to single-frequency sonication. The optimal configuration of dual-frequency sonication in this study achieves a local heat transfer enhancement factor of up to 366% and enhances Turbulent Kinetic Energy by up to 84% compared to a silent regime.

ULTRASONICS SONOCHEMISTRY (2021)

Article Materials Science, Multidisciplinary

Nucleation kinetics of paramagnetic and diamagnetic metal melts under a high magnetic field

Zhipeng Long et al.

Summary: The influence of a high magnetic field on the nucleation kinetics of paramagnetic aluminum and diamagnetic zinc melts has been studied. It was found that the high magnetic field increases undercooling and decreases activation energy of pure aluminum and pure zinc. Nucleation frequency is higher under a high magnetic field regardless of magnetism.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Thermodynamics

Effects of mechanical vibration on melting behaviour of phase change material during charging process

Guoqiang Wu et al.

Summary: Mechanical vibration can enhance heat transfer of thermal systems, with factors such as frequency and orientation affecting melting processes. Low frequency vibration accelerates melting, while higher frequency has a weaker acceleration effect. Vibration axis parallel to gravity results in the fastest thermal response rate.

APPLIED THERMAL ENGINEERING (2021)

Article Thermodynamics

Numerical simulation of ultrasonic enhancement by acoustic streaming and thermal effect on mass transfer through a new computation model

Xingshuo Chen et al.

Summary: A new computational model is established to quantitatively calculate the effect of ultrasound on mass transfer coefficient in liquid-solid reaction, showing that the mass transfer coefficient has a maximum value near the center of the silicon wafer and increases with reaction time. The enhancement of mass transfer coefficient is mainly due to acoustic streaming, while the increase with time is attributed to the thermal effect of ultrasound.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Article Thermodynamics

Effect of Acoustic Streaming on Heat Transfer of Porous Composite Phase Change Material by Using Lattice Boltzmann Simulation

Xiangxuan Li et al.

Summary: The study found that acoustic streaming enhances fluid flow in the liquid phase region, reduces temperature inhomogeneity, and affects the inclination of the liquid-solid interface front. The increase in Rayleigh number and Prandtl number affects the natural convection and forced convection caused by acoustic streaming, with its influence first slightly rising and then dropping.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2021)

Article Thermodynamics

The impingement of liquid boiling droplet onto a molten phase change material as a direct-contact solidification method

Shahin Faghiri et al.

Summary: The study investigated the impact of acetone drops on molten paraffin, categorizing four distinct impact regimes under different Weber numbers and surface temperatures. The research concluded that increased molten paraffin temperature and impact Weber number result in the expansion of solidified paraffin area on the melt free surface.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2021)

Article Thermodynamics

Characteristics and control mechanism of melting process under extra magnetic force fields

Renkun Dai et al.

APPLIED THERMAL ENGINEERING (2020)

Article Thermodynamics

Melting behavior of phase change materials in the presence of a non-uniform magnetic-field due to two variable magnetic sources

S. A. M. Mehryan et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Article Thermodynamics

Heat transfer intensification by low or high frequency ultrasound: Thermal and hydrodynamic phenomenological analysis

O. Bulliard-Sauret et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2019)

Proceedings Paper Energy & Fuels

Impact of ultrasound on the melting process and heat transfer of phase change material

Zhongjun Yan et al.

INNOVATIVE SOLUTIONS FOR ENERGY TRANSITIONS (2019)

Article Construction & Building Technology

Ultrasonic enhancement on heat transfer of palmitic-stearic acid as PCM in unit by experimental study

Nan Zhang et al.

SUSTAINABLE CITIES AND SOCIETY (2018)

Proceedings Paper Energy & Fuels

Directional Solidification of Graphene/Paraffin nanofluids assisted by electromagnetic field

Shijun Lei et al.

CLEAN, EFFICIENT AND AFFORDABLE ENERGY FOR A SUSTAINABLE FUTURE (2015)

Article Thermodynamics

Experimental investigation of phase change material melting in rectangular enclosures with horizontal partial fins

Babak Kamkari et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)

Article Thermodynamics

Heat transfer enhancement by acoustic streaming in a closed cylindrical enclosure filled with water

B. Tajik et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)

Review Green & Sustainable Science & Technology

Thermal conductivity enhancement of phase change materials for thermal energy storage: A review

Liwu Fan et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2011)

Article Biochemistry & Molecular Biology

Ultrasound and matter - Physical interactions

Victor F. Humphrey

PROGRESS IN BIOPHYSICS & MOLECULAR BIOLOGY (2007)

Article Thermodynamics

A study of the effect of ultrasonic vibrations on phase-change heat transfer

YK Oh et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2002)

Article Engineering, Mechanical

An experimental study of accelerating phase change heat transfer

YK Oh et al.

KSME INTERNATIONAL JOURNAL (2001)

Article Acoustics

A finite element model for simulating acoustic streaming in cystic breast lesions with experimental validation

KR Nightingale et al.

IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL (2000)