☆ 4.7 Article

Measurement of reaction temperature distribution inside of methanol steam reforming microreactor using infrared thermography

APPLIED THERMAL ENGINEERING (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Experimental evaluation of methanol steam reforming reactor heated by catalyst combustion for kW-class SOFC

Yang Hu et al.

Summary: This paper investigates the distributed power generation of methanol steam reforming reactor combined with solid oxide fuel cell (SOFC), which offers significant economic advantages. A designed methanol steam reforming reactor integrates catalyst combustion, vaporization, and reforming to provide real-time fuel supply for kW-class SOFC without additional heating equipment. The optimal operating condition for the reforming reactor is identified as 523-553 K with a steam to carbon ratio (S/C) of 1.2. The reforming performance is influenced by methanol steam reforming (MSR), methanol decomposition (MD), and water-gas shift (WGS). The operating temperature is the primary factor affecting the conversion rate and composition of the reforming gas. The methanol conversion rate reaches up to 95.03% with a liquid space velocity (LHSV) affecting it inversely. The reforming reactor shows stability in supplying fuel for up to 1125 W SOFC.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2023)

添加到收藏夹

Article Energy & Fuels

Computational study of the segmental catalysis of steam-methanol reforming in heat integrated microchannel reactors for hydrogen production

Junjie Chen et al.

Summary: The present study focuses on the use of segmentally catalyzed steam-methanol reforming processes for hydrogen production in heat-integrated microchannel reactors. Computational simulations are performed to understand the fundamental phenomena involved in segmental catalysis and the autothermal operation. The benefits of segmental catalysis and heat phenomena are discussed, and the effects of wall thermal conductivity, flow velocity, and catalyst segment thickness are evaluated for designing heat-integrated reactors.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2023)

添加到收藏夹

Article Energy & Fuels

Methanol steam reforming reactor with fractal tree-shaped structures for photovoltaic/thermochemical hybrid power generation

Kai Zhao et al.

Summary: In this study, a fractal tree-shaped structure is introduced to improve the heat transfer and methanol conversion performance of the MSR reactor in a photovoltaic/thermochemical hybrid system. Experimental results show that the methanol conversion rate of the novel reactor is 26.5% higher than that of traditional reactors. By developing a 3D multiphysics model, the mechanism of this improvement is revealed. The fractal tree-shaped structure can improve the net solar-electric efficiency of the system and has energy storage capability.

APPLIED ENERGY (2023)

添加到收藏夹

Article Thermodynamics

Infrared thermography observations of crystallization fouling in a plate heat exchanger

Jure Berce et al.

Summary: This study investigated calcium carbonate crystallization fouling in a corrugated plate heat exchanger, and demonstrated the use of temperature and flow measurements, coupled with infrared thermography, to monitor fouling. The results showed that fouling caused channel blockage and flow obstructions, resulting in significant flow redistribution within the channel. This approach provides valuable insights for heat exchanger fouling studies and lays the foundation for future research on dynamic operation and computational models.

APPLIED THERMAL ENGINEERING (2023)

添加到收藏夹

Article Thermodynamics

Enhancement of proton exchange membrane fuel cell net electric power and methanol-reforming performance by vein channel carved into the reactor plate

Shiang-Wuu Perng et al.

Summary: This article examines the fuel conversion ability of a small methanol steam reformer and the net electric power of a proton exchange membrane fuel cell. By creating vein channels with varying widths and angles, the hydrogen yield, methanol conversion, and cell net electric power are evaluated at different temperatures. The findings show that adjusting the vein channel width and angle can enhance the fuel conversion and net electric power of the fuel cell.

ENERGY (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cr3+doped CaF2 transparent ceramic with effective broadband near-infrared emission

Changhai Zhang et al.

Summary: In this study, Cr3+ doped CaF2(CaF2:Cr3+) precursor powders with a single valence of Cr3+ ion were synthesized by coprecipitation and CaF2:Cr3+ transparent ceramics were successfully prepared by vacuum hot-press sintering. The obtained ceramics exhibited high transmittance of 83% at 1200 nm and broadband near-infrared emission covering 680-980 nm with a FWHM of 130 nm. Moreover, the photoluminescence properties of the ceramics could be tuned by the concentration of Cr3+ ions.

MATERIALS LETTERS (2023)

添加到收藏夹

Article Chemistry, Physical

Trapezoidal cavity for high reforming temperature performance of auto-thermal methanol steam reforming micro-reactor for hydrogen production

Tianqing Zheng et al.

Summary: This study proposes a method of designing a trapezoidal cavity in an auto-thermal methanol steam reforming micro-reactor (ATMSRM) to enhance its reforming temperature performance and hydrogen production. The numerical simulation model of ATMSRM is used to investigate the influence of different geometric sizes of the trapezoidal cavity. The results show that using a specific size of trapezoidal cavity can improve the reforming temperature performance and hydrogen production performance.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

添加到收藏夹

Article Engineering, Chemical

Minimizing Heat Transfer Resistance in an Integrated MethanolSteam Reformer Designed Using Space-Filling Curves

Md. Malik Nawaz Khan et al.

Summary: This article introduces a sophisticated reformer design using Hilbert's space-filling curves, which solves the problem of high thermal resistance in conventional packed bed methanol steam reformers, and achieves high methanol conversion and low carbon monoxide production.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2022)

添加到收藏夹

Article Materials Science, Coatings & Films

Development of a centrifugal coating method to load catalyst washcoat onto porous substrates with high uniformity and adhesive strength

Yancheng Wang et al.

Summary: This study presents a rapid centrifugal coating method for effectively and uniformly loading gamma-Al2O3 washcoat onto porous copper foam, which can enhance the performance and service life of microreactors. Hydroxyethyl methyl cellulose (HEMC) was used as the binder and the effects of loading parameters were studied. The results demonstrate the potential of the developed centrifugal coating method for catalyst coating preparation in microreactors.

SURFACE & COATINGS TECHNOLOGY (2022)

添加到收藏夹

Review Chemistry, Analytical

A Comparative Review of Thermocouple and Infrared Radiation Temperature Measurement Methods during the Machining of Metals

Emilios Leonidas et al.

Summary: During the machining process, substantial thermal loads are generated, leading to issues such as accelerated tool wear, dimensional inaccuracies, and thermally induced defects. Temperature, an important machining response, is difficult to monitor in high-speed machining applications. This article reviews the thermocouple and infrared radiation temperature measurement methods used by researchers in turning, drilling, and milling operations, and evaluates their merits and limitations.

SENSORS (2022)

添加到收藏夹

Article Thermodynamics

Enhancement of methanol steam reforming in a tubular fixed-bed reactor with simultaneous heating inside and outside

Huajing Zhang et al.

Summary: This paper proposes a tubular fixed-bed reactor with helical fins to improve the cold spot problem and enhance the methanol conversion. The effects of geometric parameters of the helical fins, temperature, inlet flow velocity, and steam to methanol molar ratio on the reaction performance are numerically studied, showing significant influence.

ENERGY (2022)

添加到收藏夹

Review Thermodynamics

A comprehensive review of hydrogen production from methanol thermochemical conversion for sustainability

Gabriel Garcia et al.

Summary: This review discusses various methods of hydrogen production from methanol, with a focus on catalyst development and reactor technology. Copper-based catalysts are popular due to their high activity and selectivity but have stability issues, leading to exploration of other metals like zinc and chromium. Novel reactor structures such as porous copper fiber sintered-felt and membrane reactors have been explored for improved efficiency and energy savings.

ENERGY (2021)

添加到收藏夹

Review Nanoscience & Nanotechnology

Cancer nanotheranostics in the second near-infrared window

Shanshan Jiang et al.

Summary: Nanotheranostics is an emerging nanomedicine technology that combines diagnostics and therapeutics in a single platform, allowing for real-time monitoring of therapeutic effects and personalized long-term treatment. Optical stimuli of nanotheranostics in the NIR-II region offer enhanced controllability and efficiency in combatting cancer, leading to growing research efforts in this field.

VIEW (2021)

添加到收藏夹

Review Thermodynamics

Experimental analysis of the thermal performance on electronic cooling by a combination of cross-flow and an impinging air jet

Yunesky Masip et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Chemistry, Physical

Experimental investigation on hydrogen production by methanol steam reforming in a novel multichannel micro packed bed reformer

Xiaoru Zhuang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

添加到收藏夹

Article Nuclear Science & Technology

External surface temperature measurements for the heat transfer analysis of internally heated cylindrical clad-tubes subjected to external forced convection bulk water coolant thermal-hydraulic conditions

K. Govinder et al.

NUCLEAR ENGINEERING AND DESIGN (2020)

添加到收藏夹

Review Energy & Fuels

An overview of the methanol reforming process: Comparison of fuels, catalysts, reformers, and systems

Munur Sacit Herdem et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2019)

添加到收藏夹

Article Energy & Fuels

Three-dimensional numerical study on a novel parabolic trough solar receiver-reactor of a locally-installed Kenics static mixer for efficient hydrogen production

Ze-Dong Cheng et al.

APPLIED ENERGY (2019)

添加到收藏夹

Article Thermodynamics

Catalyst layer design and arrangement to improve the performance of a microchannel methanol steam reformer

Munur Sacit Herdem et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

添加到收藏夹

Article Chemistry, Physical

Design, fabrication and performance evaluation of an integrated reformed methanol fuel cell for portable use

Shubin Zhang et al.

JOURNAL OF POWER SOURCES (2018)

添加到收藏夹

Review Green & Sustainable Science & Technology

Advances in reforming and partial oxidation of hydrocarbons for hydrogen production and fuel cell applications

Sivaprakash Sengodan et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

添加到收藏夹

Review Chemistry, Applied

Design and Scaling Up of Microchemical Systems: A Review

Jisong Zhang et al.

ANNUAL REVIEW OF CHEMICAL AND BIOMOLECULAR ENGINEERING, VOL 8 (2017)

添加到收藏夹

Article Chemistry, Physical

Preparation and Optical Properties of Infrared Transparent 3Y-TZP Ceramics

Chuanfeng Wang et al.

MATERIALS (2017)

添加到收藏夹

Article Thermodynamics

Infrared thermography measurement of two-phase boiling flow heat transfer in a microchannel

Tsung-Lin Liu et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Thermodynamics

Performance monitoring of direct air-cooled power generating unit with infrared thermography

Zhihua Ge et al.

APPLIED THERMAL ENGINEERING (2011)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.