☆ 4.7 Article

Experimental analysis of carbon-based Phase Change Materials composites for a fast numerical design of cold energy storage systems

APPLIED THERMAL ENGINEERING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Green & Sustainable Science & Technology

Optimization and design criterion of the shell-and-tube thermal energy storage with cascaded PCMs under the constraint of outlet threshold temperature

Meng-Jie Li et al.

Summary: The study aims to improve the performance of shell-and-tube LHTES by optimizing the geometry parameters and distribution of cascaded PCMs. Results show that using specific design criteria can significantly increase the efficiency of LHTES and reduce investment costs.

RENEWABLE ENERGY (2022)

添加到收藏夹

Article Thermodynamics

Compression effect of metal foam on melting phase change in a shell-and-tube unit

Junfei Guo et al.

Summary: Metal foams can significantly improve the low effective thermal conductivity in phase change materials (PCMs) during melting and solidification processes, and compressing metal foams can further accelerate the energy storage rate. Results showed that compressed metal foam had better performance in improving phase change, while over-compressing metal foam should be avoided.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Finite Element Prediction of the Thermal Conductivity of GNP/Al Composites

X. S. Yang et al.

Summary: The effective thermal conductivity of graphene nanoplatelet (GNP)/Al composites is influenced by factors such as the shape, aspect ratio, configuration, and volume fraction of GNPs. The study found that composites with elliptic GNPs have the highest thermal conductivity, increasing the aspect ratio of GNPs leads to an increase in thermal conductivity, and composites with layered GNPs have the highest thermal conductivity among different configurations. Additionally, the thermal conductivity is sensitive to the volume fraction of GNPs, reaching a high value when the volume fraction of layered GNPs is 1.54%.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2022)

添加到收藏夹

Article Energy & Fuels

Recent developments in nano-enhanced phase change materials for solar thermal storage

Banumathi Munuswamy Swami Punniakodi et al.

Summary: This review discusses the effects of different additives on improving the performance of nano-enhanced PCM, which helps address the heat storage issue in solar thermal systems by improving thermal conductivity and maintaining energy storage density.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

添加到收藏夹

Article Chemistry, Physical

Minimal crystallographic descriptors of sorption properties in hypothetical MOFs and role in sequential learning optimization

Giovanni Trezza et al.

Summary: This article focuses on gas sorption within metal-organic frameworks (MOFs) for energy applications. The authors identify the essential crystallographic descriptors that influence the most important properties of MOFs for CO2 and H2O. They compare different sequential learning algorithms to optimize MOFs properties and clarify the role of these descriptors. Additionally, the authors propose a fast procedure to optimize specific energy in a closed sorption energy storage system using limited information.

NPJ COMPUTATIONAL MATERIALS (2022)

添加到收藏夹

Article Construction & Building Technology

Carbon nanotubes modified graphene hybrid Aerogel-based composite phase change materials for efficient thermal storage

Xin Li et al.

Summary: This study proposes a method of using self-assembled hybrid aerogel filled with carbon nanotubes and reduced graphene oxide nanosheets to improve the leakage behavior and heat transfer performance of polyethylene glycol (PEG). The resulting PEG/CGA composite phase change materials (c-PCMs) exhibit excellent thermal cycling stability and fast temperature rise rate. The introduction of carbon nanotubes not only enhances the adsorption capacity of the c-PCMs and alleviates the leakage of PEG, but also improves the heat transfer performance.

ENERGY AND BUILDINGS (2022)

添加到收藏夹

Article Energy & Fuels

Orientation impact on structural integrity of a shell and tube latent heat thermal energy storage system

Soheila Riahi et al.

Summary: This study investigates the impact of the orientation on the melting process and the consequent thermal stresses in a lab-scale latent heat shell and tube system using a combination of transient computational fluid dynamics and finite element analyses. The results show that the thermal stress is lower in the horizontal orientation, especially under the condition of a 100 K initial temperature difference.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Article Thermodynamics

Analysis of phase change material thermal effects in large-scale proton-exchange membrane fuel cell based on open-source computational fluid dynamics

Iman Sarani et al.

Summary: This study evaluates the effects of solid-liquid phase change materials (PCM) on the thermal management of proton-exchange membrane fuel cells (PEMFC) using a novel 3D model based on open-source computational fluid dynamics software. The results show that PCM has a good cooling effect and can distribute temperature uniformly. Furthermore, the location of PCM and the boundary conditions have a significant impact on thermal performance, and PCM can store waste heat.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Review Energy & Fuels

An overview on the use of additives and preparation procedure in phase change materials for thermal energy storage with a focus on long term applications

Alessandro Ribezzo et al.

Summary: This review provides an up-to-date and comprehensive overview of the use of additives in Phase Change Materials (PCMs). It covers both experimental and theoretical perspectives. The traditional focus has been on short-term thermal energy storage applications, where additives have been extensively studied to enhance the unsatisfactory thermo-physical properties of PCMs. In this review, the emphasis is on the most important PCMs for long-term thermal energy storage. The role played by additives and additivation protocols on the thermo-physical and stability properties of PCMs is discussed. The use of additives in sugar alcohols, sodium acetate trihydrate, and emerging PCMs capable of solid-to-solid transitions is specifically highlighted. The review also identifies outstanding issues and aims to contribute to the understanding and application of less mature PCMs for long-term thermal energy storage.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Review Computer Science, Artificial Intelligence

A comprehensive review of electrochemical hybrid power supply systems and intelligent energy managements for unmanned aerial vehicles in public services

Caizhi Zhang et al.

Summary: This paper comprehensively reviews the current power supply systems used in UAVs and proposes solutions based on hybrid power systems and optimized energy management. The study finds that data-driven models with artificial intelligence have potential in intelligent energy management.

ENERGY AND AI (2022)

添加到收藏夹

Article Thermodynamics

Multi-objective optimization of finned metal foam heat sinks: Tradeoff between heat transfer and pressure drop

Nicola Bianco et al.

Summary: In this paper, numerical analysis is used to study optimized design of metal foam heat sinks, proposing a method to simultaneously maximize heat rate and minimize pumping power.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Energy & Fuels

Thermal performance enhancement of eutectic PCM laden with functionalised graphene nanoplatelets for an efficient solar absorption cooling storage system

Rupinder Pal Singh et al.

Summary: This study investigates the thermal enhancement of a binary eutectic phase change material (PCM) laden with COOH-functionalized Graphene nanoplatelets for a solar cooling thermal storage system. The results show that the nano-composite has improved thermal conductivity and specific heat properties. In a solar cooling system, the new nano-composite accelerates heat storage process and reduces total melt duration.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Energy & Fuels

Thermal Analysis of Organic and Nanoencapsulated Electrospun Phase Change Materials

Evdoxia Paroutoglou et al.

Summary: This study identifies suitable phase change materials for latent heat thermal energy storage and successfully produces composite materials with desirable properties. Among them, organic paraffins show promising potential in the preparation of electrospun microfibers, demonstrating high encapsulation efficiency.

ENERGIES (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Data-driven appraisal of renewable energy potentials for sustainable freshwater production in Africa

Paolo De Angelis et al.

Summary: Clean water scarcity is a major global issue affecting millions of people worldwide, with nearly half of those lacking access to safe water living in Africa. Despite this, Africa has untapped potential in renewable energy production, which could be utilized to address water shortages. Data-driven approaches are crucial for analyzing possible scenarios and developing policies to combat water scarcity in the region.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

添加到收藏夹

Article Energy & Fuels

Design assessment of a horizontal shell and tube latent heat storage system: Alternative to fin designs

Gurpreet Singh Sodhi et al.

Summary: In this study, a horizontal shell and tube latent heat storage system was analyzed for its charging and discharging performances. By optimizing the design, significant reductions in charging and discharging times were achieved, with the system showing improved performance compared to conventional systems.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Thermodynamics

Transient Thermo-mechanical analysis of a shell and tube latent heat thermal energy storage for CSP plants

Soheila Riahi et al.

Summary: The study investigated the structural integrity of a lab-scale shell and tube latent heat thermal energy storage system under transient conditions, showing that the system has good structural integrity under a 50K temperature gradient during transient operation. Through thermoelastic and elastic-plastic analysis, the system can still operate under a higher temperature gradient of 100K and is reasonably protected against creep failure.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Numerical Analysis on a Latent Thermal Energy Storage System with Phase Change Materials and Aluminum Foam

Bernardo Buonomo et al.

HEAT TRANSFER ENGINEERING (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Techno-Economic Analysis of a Solar Thermal Plant for Large-Scale Water Pasteurization

Alberto Bologna et al.

APPLIED SCIENCES-BASEL (2020)

添加到收藏夹

Article Thermodynamics

Combination of micro-computed X-ray tomography and electronic microscopy to understand the influence of graphene nanoplatelets on the thermal conductivity of epoxy composites

Sebastien Depaifve et al.

THERMOCHIMICA ACTA (2020)

添加到收藏夹

Article Energy & Fuels

Numerical simulation and validation of commercial hot water tanks integrated with phase change material-based storage units

Manfredi Neri et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Article Thermodynamics

Thermal conductivity enhancement of form-stable tetradecanol/expanded perlite composite phase change materials by adding Cu powder and carbon fiber for thermal energy storage

Fei Cheng et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Energy & Fuels

Heat Transfer at the Interface of Graphene Nanoribbons with Different Relative Orientations and Gaps

Shahin Mohammad Nejad et al.

ENERGIES (2019)

添加到收藏夹

Article Chemistry, Physical

Bioinspired interfacial engineering of polymer based energetic composites towards superior thermal conductivity via reducing thermal resistance

Guansong He et al.

APPLIED SURFACE SCIENCE (2019)

添加到收藏夹

Article Materials Science, Composites

Relationship between the structure and thermal properties of polypropylene/graphene nanoplatelets composites for different platelet-sizes

Ziwei Xu et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Hierarchically channel-guided porous wood-derived shape-stabilized thermal regulated materials with enhanced thermal conductivity for thermal energy storage

Yajing Zhao et al.

MATERIALS RESEARCH EXPRESS (2019)

添加到收藏夹

Article Energy & Fuels

Water/Ethanol and 13X Zeolite Pairs for Long-Term Thermal Energy Storage at Ambient Pressure

Matteo Fasano et al.

FRONTIERS IN ENERGY RESEARCH (2019)

添加到收藏夹

Review Thermodynamics

An overview of thermal energy storage systems

Guruprasad Alva et al.

ENERGY (2018)

添加到收藏夹

Article Construction & Building Technology

Honeycomb-like structured biological porous carbon encapsulating PEG: A shape-stable phase change material with enhanced thermal conductivity for thermal energy storage

Yajing Zhao et al.

ENERGY AND BUILDINGS (2018)

添加到收藏夹

Article Physics, Multidisciplinary

Mesoscopic Moment Equations for Heat Conduction: Characteristic Features and Slow-Fast Mode Decomposition

Luca Bergamasco et al.

ENTROPY (2018)

添加到收藏夹

Review Green & Sustainable Science & Technology

Review on thermal conductivity enhancement, thermal properties and applications of phase change materials in thermal energy storage

Yaxue Lin et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Numerical study on the thermal behavior of graphene nanoplatelets/epoxy composites

Wenkai Xiao et al.

RESULTS IN PHYSICS (2018)

添加到收藏夹

Article Energy & Fuels

Comparison between two different operation strategies for a heat-driven residential natural gas-fired CHP system: Heat dumping vs. load partialization

Luigi Mongibello et al.

APPLIED ENERGY (2016)

添加到收藏夹

Article Chemistry, Applied

Enhancement of electrical and thermal conductivity of Su-8 photocrosslinked coatings containing graphene

M. Sangermano et al.

PROGRESS IN ORGANIC COATINGS (2015)

添加到收藏夹

Review Green & Sustainable Science & Technology

Thermal transmittance of carbon nanotube networks: Guidelines for novel thermal storage systems and polymeric material of thermal interest

Matteo Fasano et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Enhanced thermal properties of novel shape-stabilized PEG composite phase change materials with radial mesoporous silica sphere for thermal energy storage

Xin Min et al.

SCIENTIFIC REPORTS (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of Graphene Layer Thickness and Mechanical Compliance on Interfacial Heat Flow and Thermal Conduction in Solid-Liquid Phase Change Materials

Ronald J. Warzoha et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

添加到收藏夹

Article Energy & Fuels

Effects of various carbon nanofillers on the thermal conductivity and energy storage properties of paraffin-based nanocomposite phase change materials

Li-Wu Fan et al.

APPLIED ENERGY (2013)

添加到收藏夹

Article Thermodynamics

The effect of carbon nanotubes in enhancing the thermal transport properties of PCM during solidification

Vellaisamy Kumaresan et al.

HEAT AND MASS TRANSFER (2012)

添加到收藏夹

Article Thermodynamics

Reconstruction and modeling of 3D percolation networks of carbon fillers in a polymer matrix

Eliodoro Chiavazzo et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2010)

添加到收藏夹

Article Physics, Applied

On the lack of thermal percolation in carbon nanotube composites

N Shenogina et al.

APPLIED PHYSICS LETTERS (2005)

添加到收藏夹

Article Chemistry, Physical

Influence of dispersion states of carbon nanotubes on physical properties of epoxy nanocomposites

YS Song et al.

CARBON (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.