4.7 Article

Designing water/air-stable Co-free high-entropy oxide cathodes with suppressed irreversible phase transition for sodium-ion batteries

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Promoting Reversibility of Co-Free Layered Cathodes by Al and Cation Vacancy

Tongshuai Wang et al.

Summary: Li-ion batteries with layered cathodes can alleviate the limited range of electric vehicles, but the scarcity of Co hinders their widespread use. Eliminating Co from layered cathodes is necessary for the global adoption of electric vehicles, but Co-free cathodes face challenges in suppressing Li/Ni mixing. Various metals have been proposed as replacements for Co, with the priority being to suppress Li/Ni mixing.

ADVANCED ENERGY MATERIALS (2023)

Review Chemistry, Multidisciplinary

Unraveling Anionic Redox for Sodium Layered Oxide Cathodes: Breakthroughs and Perspectives

Haixia Ren et al.

Summary: This review systematically summarizes the development history and mechanism of anionic redox reaction in layered transition metal oxides. Challenges and strategies for triggering and stabilizing anionic redox are discussed, and different types of sodium layered oxide cathodes are classified and compared. The review also provides an overview of characterization techniques for anionic oxygen redox. Finally, the prospective and future development directions of sodium layered transition oxide with anionic redox reaction are analyzed and suggested.

ADVANCED MATERIALS (2022)

Article Chemistry, Multidisciplinary

Enabling Anionic Redox Stability of P2-Na5/6Li1/4Mn3/4O2 by Mg Substitution

Yangyang Huang et al.

Summary: In this study, stable anionic redox reactions were achieved by substituting sodium ions with magnesium ions in P2-type sodium-rich layered oxide. The density functional theory (DFT) calculations showed that magnesium substitution effectively decreased the oxygen chemical potential, leading to improved lattice oxygen stability. It was also found that at a highly desodiated state, the remaining magnesium ions in the lattice could interact with oxygen 2p orbitals, facilitating the reversibility of oxygen redox. Cycling tests demonstrated that Na0.773Mg0.03Li0.25Mn0.75O2 exhibited better cycle stability compared to Na0.83Li0.25Mn0.75O2. The experimental results also showed that Na0.773Mg0.03Li0.25Mn0.75O2 had a zero-strain cathode behavior.

ADVANCED MATERIALS (2022)

Article Materials Science, Multidisciplinary

High-entropy chemistry stabilizing spinel oxide (CoNiZnXMnLi)3O4 (X = Fe, Cr) for high-performance anode of Li-ion batteries

Kang-Hui Tian et al.

Summary: High entropy oxides (HEOs) have shown promising application prospects in energy storage, and the six-element HEOs with spinel structure exhibit outstanding lithium storage performances due to synergy effect and entropy stabilization. Among them, (CoNiZnFeMnLi)3O-4 delivers higher initial discharge specific capacity, better cycle stability, and rate performance in the half-cell. Ex situ X-ray diffraction reveals the electrochemical reaction mechanism, contributing to the excellent cycle and rate performance. This research provides fresh insights for the development of advanced energy storage materials for high-performance batteries.

RARE METALS (2022)

Article Chemistry, Physical

NaMn0.2Fe0.2Co0.2Ni0.2Ti0.2O2 high-entropy layered oxide - experimental and theoretical evidence of high electrochemical performance in sodium batteries

Katarzyna Walczak et al.

Summary: This paper introduces a high-entropy layered oxide NaMn0.2Fe0.2Co0.2Ni0.2Ti0.2O2, which exhibits superior electrochemical properties and stable capacity. Through structural analysis and computational modeling, the study provides a comprehensive understanding of the reorganization mechanism of the cathode structure. Fundamental understanding of the phase transformation is crucial for tailoring structural composition and achieving high-performance cathodes.

ENERGY STORAGE MATERIALS (2022)

Article Chemistry, Multidisciplinary

Using High-Entropy Configuration Strategy to Design Na-Ion Layered Oxide Cathodes with Superior Electrochemical Performance and Thermal Stability

Feixiang Ding et al.

Summary: In this study, a high-entropy configuration strategy was used to improve the NaxTMO2 cathode materials, which enhanced the skeleton structure and particle morphology, leading to improved Na+ transport kinetics and battery performance, as well as enhanced thermal safety.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2022)

Article Multidisciplinary Sciences

Entropy and crystal-facet modulation of P2-type layered cathodes for long-lasting sodium-based batteries

Fang Fu et al.

Summary: A strategy of stabilizing the structure and promoting anionic redox through configurational entropy and ion-diffusion structural tuning is reported for Mn-rich layered cathodes in Na-based batteries. The developed P2-type layered cathodes possess improved structural and thermal stability, faster anionic redox kinetics, and higher capacity retention.

NATURE COMMUNICATIONS (2022)

Article Chemistry, Multidisciplinary

Synergetic Anion-Cation Redox Ensures a Highly Stable Layered Cathode for Sodium-Ion Batteries

Xiang Li et al.

Summary: Sodium-ion batteries are considered as a promising option for large-scale energy storage. Layered iron/manganese oxide cathodes have garnered considerable attention due to their abundance of elements and high theoretical capacity. This study proposes a strategy of anion-cation synergetic redox to suppress structural deterioration and improve electrochemical performance. The results demonstrate that the Na0.8Li0.2Fe0.2Mn0.6O2 electrode exhibits resistance to moisture erosion, solid solution behavior, and excellent reversible capacity and cycling stability.

ADVANCED SCIENCE (2022)

Article Chemistry, Multidisciplinary

Formulating High-Rate and Long-Cycle Heterostructured Layered Oxide Cathodes by Local Chemistry and Orbital Hybridization Modulation for Sodium-Ion Batteries

Yao Xiao et al.

Summary: This study reports the concept of accurately manipulating structural evolution and formulating high-performance heterostructured biphasic layered oxide cathodes for sodium-ion batteries. The research shows that this strategy can achieve excellent rate performance and cycling stability for the cathode material, while maintaining good compatibility with the anode.

ADVANCED MATERIALS (2022)

Article Chemistry, Physical

Impurity-vibrational entropy enables quasi-zero-strain layered oxide cathodes for high-voltage sodium-ion batteries

Haixia Ren et al.

Summary: By surface coating and doping modification, the electrochemical performance of P2-NaNM@Zr material can be significantly improved, achieving stable and reversible anionic redox reaction and improving the capacity retention and cycling performance of sodium-ion batteries.

NANO ENERGY (2022)

Article Multidisciplinary Sciences

Compositionally complex doping for zero-strain zero-cobalt layered cathodes

Rui Zhang et al.

Summary: By using a new compositionally complex doping strategy, researchers have successfully fabricated a high-Ni, zero-Co layered cathode with extremely high thermal and cycling stability. The cathode exhibits nearly zero volumetric change, greatly reducing lattice defects and local strain-induced cracks. This study is of great significance for addressing the safety and stability concerns of high-Ni, zero-Co cathode materials.

NATURE (2022)

Article Chemistry, Physical

Boosting electrochemical reaction and suppressing phase transition with a high-entropy O3-type layered oxide for sodium-ion batteries

Kanghui Tian et al.

Summary: A new six-component high-entropy oxide (HEO) layered cathode was designed and prepared to achieve highly reversible electrochemical reactions and phase-transition behavior, exhibiting good cycling performance and outstanding rate capability. The enhanced performance can be attributed to the disordered distribution of multi-component transition metals in HEO suppressing the ordering of electric charges and sodium vacancies, thereby inhibiting the interlayer slide and phase transition. In situ X-ray diffraction and spectroscopy techniques confirmed the effectiveness of high-entropy designing in stabilizing the layered structure and improving the cycling stability and rate capability of sodium-ion batteries.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Review Chemistry, Physical

The Layered Oxides in Lithium and Sodium-Ion Batteries: A Solid-State Chemistry Approach

Claude Delmas et al.

Summary: This paper provides an overview of research on lithium and sodium layered materials as positive electrodes in lithium (sodium)-ion batteries, focusing on the solid-state chemistry's role in discovering new materials and optimizing properties for different applications. Layered structures, especially lithium-based ones, are considered as the best candidates for high energy density batteries for mobile applications. Through high-temperature solid-state chemistry, many substituted phases have been obtained to stabilize the layered structure and increase the specific capacity.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Cation-disordered rocksalt-type high-entropy cathodes for Li-ion batteries

Zhengyan Lun et al.

Summary: High-entropy ceramics are solid solutions with compositional flexibility and wide applicability, showing substantial performance improvement in lithium-ion battery cathodes. The high-entropy concept leads to enhancements in energy density and rate capability, especially in cation-disordered rocksalt-type cathodes. High-entropy materials have the potential for various applications and the design of high-entropy solid solutions in the DRX space can further enhance performance in battery electrodes.

NATURE MATERIALS (2021)

Article Nanoscience & Nanotechnology

Insights on Electrochemical Behaviors of Sodium Peroxide as a Sacrificial Cathode Additive for Boosting Energy Density of Na-Ion Battery

Yu-Jie Guo et al.

Summary: This study introduces the use of Na2O2 as a sacrificial sodium source to improve the energy density and cyclic stability of Na-ion full cells. Compared to the pristine cathode, the Na2O2-decorated cathode shows higher discharge capacity, better capacity retention, and improved rate capability in full cells with a carbon anode.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Physical

Reversible OP4 phase in P2-Na2/3Ni1/3Mn2/3O2 sodium ion cathode

Huanqing Liu et al.

Summary: Fe/Ti co-substitution strategy was successfully employed to enhance the rate and cycling performances of P2-Na2/3Ni1/3Mn2/3O2 cathode material for sodium ion batteries. This strategy effectively stabilized the interlayer framework, suppressed Na+/vacancy ordering, and improved Na ion transport. The Fe/Ti co-substituted NFMT cathode exhibited high energy density, superior kinetics, and capacity retention.

JOURNAL OF POWER SOURCES (2021)

Article Chemistry, Physical

A highly-stable layered Fe/Mn-based cathode with ultralow strain for advanced sodium-ion batteries

Rui Qi et al.

Summary: This study demonstrates an efficient strategy of improving the structural durability of iron- and manganese-based cathodes through dual heteroatom doping, resulting in cathode materials with excellent cyclability and rate capability for grid-scale energy storage systems.

NANO ENERGY (2021)

Article Chemistry, Physical

A New Approach to Stable Cationic and Anionic Redox Activity in O3-Layered Cathode for Sodium-Ion Batteries

Natalia Voronina et al.

Summary: Stable cationic and anionic redox behavior were revealed in the O3-type layered Na[Ni2/3Ru1/3]O-2 cathode for sodium-ion batteries, leading to cycling stability and high capacity retention. The covalent characteristic of transition metal-oxygen and transition metal-transition metal bonds contributed to the cycling stability of the electrode. Operando studies confirmed the reversible electrochemical activity of Ni2+/Ni3+ and O2-/O1- redox reactions throughout the cycles.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Unlocking the potential of P3 structure for practical Sodium-ion batteries by fabricating zero strain framework for Na+ intercalation

Yuansheng Shi et al.

Summary: This study successfully synthesized phase-pure P3-Na0.75Mg0.08Co0.10Ni0.2Mn0.60O2 cathode material, effectively suppressing the P3-O3 phase transition through the incorporation of Mg, resulting in good cycling performance and rate capability.

ENERGY STORAGE MATERIALS (2021)

Article Nanoscience & Nanotechnology

Copper and Zirconium Codoped O3-Type Sodium Iron and Manganese Oxide as the Cobalt/Nickel-Free High-Capacity and Air-Stable Cathode for Sodium-Ion Batteries

Ya-Min Zheng et al.

Summary: The research utilized codoping of Cu and Zr to optimize the O3-type Na-Fe-Mn oxide cathode, improving its electrochemical performance and air stability, demonstrating potential applications in sodium-ion batteries.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Multidisciplinary

Designing High Energy Sodium-Ion Battery Cathodes by Utilizing P2/O3 Biphasic Structure and Lithium Honeycomb Ordering

Ji Eun Wang et al.

Summary: This study presents a lithium-substituted Fe/Mn-based P2/O3 layered oxide that overcomes structural instability and effectively constrains undesirable phase transitions through honeycomb ordering. The results highlight the correlation between the P2/O3 biphasic structure and electrochemical performance.
Review Chemistry, Multidisciplinary

Advanced cobalt-free cathode materials for sodium-ion batteries

Shiyong Chu et al.

Summary: This review comprehensively summarizes recent advances in high-performance cobalt-free cathode materials for advanced SIBs, analyzing the conflicts of structural/electrochemical stability with intrinsic insufficiencies of cobalt-free cathode materials, and discussing strategies for constructing stable cobalt-free cathode materials.

CHEMICAL SOCIETY REVIEWS (2021)

Review Chemistry, Multidisciplinary

High-entropy energy materials: challenges and new opportunities

Yanjiao Ma et al.

Summary: The essential demand for functional materials enabling the realization of new energy technologies has driven significant efforts in scientific and industrial research. High-entropy materials, with their unique structural characteristics and tunable functional properties, have gained increasing interest in the fields of environmental science and renewable energy technology. Effective strategies for designing high-entropy materials from computational techniques and experimental aspects provide researchers with guidance on potential advantages and remaining challenges.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Review Chemistry, Physical

Recent progress of high-entropy materials for energy storage and conversion

Azadeh Amiri et al.

Summary: The emergence of high-entropy materials has shown superior performance in energy conversion and storage applications, with higher electrocatalytic activities, cycling stability, and durability compared to traditional noble metal catalysts.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Review Chemistry, Physical

Recent progress of high-entropy materials for energy storage and conversion

Azadeh Amiri et al.

Summary: The emergence of high-entropy materials with their superior electrocatalytic and catalytic activities, as well as long cycling stability and durability, has led to new advancements in energy storage and conversion technologies.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Review Chemistry, Multidisciplinary

Sodium transition metal oxides: the preferred cathode choice for future sodium-ion batteries?

Qiannan Liu et al.

Summary: The exploration of next-generation sodium-ion batteries (SIBs) aims to replace lithium-ion batteries and address the depletion of lithium resources. Sodium transition metal oxides are considered promising cathode materials with anionic redox activity. Research on anionic redox in Li-rich transition metal oxides provides insight into high-capacity cathode materials for SIBs, with challenges and strategies discussed. It is expected that this work will provide new perspectives on controlling anionic redox activity and finding novel high-capacity oxide cathode materials for SIBs.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Multidisciplinary

High-Entropy Layered Oxide Cathodes for Sodium-Ion Batteries

Chenglong Zhao et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Chemistry, Physical

A high-performance layered Cr-Based cathode for sodium-ion batteries

Kaiying Xi et al.

NANO ENERGY (2020)

Article Chemistry, Physical

Graphene nanosheets loaded Fe3O4 nanoparticles as a promising anode material for lithium ion batteries

Siling Gu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Review Chemistry, Multidisciplinary

Layered Oxide Cathodes Promoted by Structure Modulation Technology for Sodium-Ion Batteries

Xiao Yao et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Editorial Material Chemistry, Physical

Direction for Commercialization of O3-Type Layered Cathodes for Sodium-Ion Batteries

Yang-Kook Sun

ACS ENERGY LETTERS (2020)

Article Multidisciplinary Sciences

The stability of P2-layered sodium transition metal oxides in ambient atmospheres

Wenhua Zuo et al.

NATURE COMMUNICATIONS (2020)

Article Engineering, Chemical

Enhancing structural stability of layered O3-type Na-Mn-Ni-Cu-O cathode material through copper substitution for sodium batteries

M. Kouthaman et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2020)

Article Chemistry, Multidisciplinary

Tuning P2-Structured Cathode Material by Na-Site Mg Substitution for Na-Ion Batteries

Qin-Chao Wang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Review Chemistry, Physical

Computational Studies of Electrode Materials in Sodium-Ion Batteries

Qiang Bai et al.

ADVANCED ENERGY MATERIALS (2018)

Article Multidisciplinary Sciences

Cation-mixing stabilized layered oxide cathodes for sodium-ion batteries

Shaohua Guo et al.

SCIENCE BULLETIN (2018)

Article Chemistry, Multidisciplinary

Designing Air-Stable O3-Type Cathode Materials by Combined Structure Modulation for Na-Ion Batteries

Hu-Rong Yao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Article Multidisciplinary Sciences

Environmentally stable interface of layered oxide cathodes for sodium-ion batteries

Shaohua Guo et al.

NATURE COMMUNICATIONS (2017)