☆ 4.5 Article

Interpretation of time-dependent current and resistance of HTS closed loop with superconducting joint considering flux creep

APPLIED PHYSICS EXPRESS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Physics, Applied

The effect of intermediate layer densification on the critical current of a Bi-2223 superconducting joint

Y. Takeda et al.

Summary: This study quantitatively investigated the effect of intermediate layer densification on the critical current (Ic) of Bi-2223 superconducting joints. The results showed that pressing the film samples to increase density can enhance the intergrain critical current density (Jc). Additionally, synthesizing an intermediate layer between two Bi-2223 tapes with uniform uniaxial pressure resulted in reproducible superconducting joints with high Ic.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2023)

添加到收藏夹

Article Engineering, Electrical & Electronic

Fabrication of Bi-2223 Superconducting Joint by Hot-Pressing Process

Yasuaki Takeda et al.

Summary: Superconducting joints between Bi-2223 tapes were fabricated using a hot-pressing process and a 24-hour heat treatment. Specialized equipment was developed to apply pressure during the heat treatment. Hot pressing yielded practical critical current even with a short heat treatment. The resistance of the superconducting joint in a closed-loop was measured at 7.3 x 10(-15) ? at 4.2 K, with an estimated maximum persistent current flow of 170 A at 4.2 K. Remaining challenges include purification and densification of the intermediate layer in the joint. Once these challenges are addressed, the hot-pressing process shows promise for high-yield fabrication of high-performance Bi-2223 superconducting joints in a short processing time.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2023)

添加到收藏夹

Article Physics, Applied

Critical current improvement and resistance evaluation of superconducting joint between Bi2223 tapes

Y. Takeda et al.

Summary: By introducing a two-step sintering process, we have improved the critical current of the superconducting joint between Bi2223 tapes, and successfully demonstrated its in-field transport and ultra-low in-field resistance. This study provides an important technological foundation for the development of Bi2223 superconducting magnets.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Review Physics, Applied

Review of the temporal stability of the magnetic field for ultra-high field superconducting magnets with a particular focus on superconducting joints between HTS conductors

Y. Takeda et al.

Summary: This article analyzes the temporal magnetic field drift and fluctuations observed in MRI and NMR magnets operating in the driven mode, and explores effective methods for stabilizing the temporal magnetic field fluctuations. In the past decade, significant progress has been made in superconducting joints between high-temperature superconductors, enabling the development of persistent-mode ultra-high field magnets.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Physics, Applied

An efficient approach for superconducting joint of YBCO coated conductors

Daxing Huang et al.

Summary: This research reports an efficient method for superconducting joints of YBCO coated conductors. By etching microchannels in the YBCO layer, the recovery of critical current in the superconducting joint is accelerated, and a dense joining is formed to enable superconducting current path. This technique can promote the persistent current mode operation of 2G HTS magnets in applications such as magnetic resonance imaging and nuclear magnetic resonance.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

In-Field Evaluation of REBCO Superconducting Joint

Kensuke Kobayashi et al.

Summary: We evaluated the joint resistance and current-carrying capacity of the intermediate grown superconducting (iGS) joint at low temperatures and high magnetic fields using a specially developed evaluation system. The results showed that the iGS joint has a sufficiently high current-carrying capacity at 4.2K in a 3T magnetic field and does not exhibit magnetic field dependence. However, at 77K, the joint resistance was relatively high due to a high load factor.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Magnetic Relaxation in Commercial REBCO Tapes With and Without Artificial Pinning Centers

Y. Tsuchiya et al.

Summary: This study evaluated the magnetization relaxation of commercial REBCO tapes from different manufacturers at various temperatures and magnetic fields. It was found that there was negligible change at low temperatures, but the introduction of APC resulted in different changes at medium and high temperatures depending on the manufacturer.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Development of a Superconducting Joint Resistance Evaluation System

Kensuke Kobayashi et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2020)

添加到收藏夹

Article Physics, Applied

High Ic superconducting joint between Bi2223 tapes

Yasuaki Takeda et al.

APPLIED PHYSICS EXPRESS (2019)

添加到收藏夹

Article Physics, Applied

Superconducting joint between multi-filamentary Bi2Sr2Ca2Cu3O10+δ tapes based on incongruent melting for NMR and MRI applications

Xinzhe Jin et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

Measurement of Persistent Current in a Gd123 Coil With a Superconducting Joint Fabricated by the CJMB Method

Xinzhe Jin et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2018)

添加到收藏夹

Article Physics, Applied

Development of a persistent superconducting joint between Bi-2212/Ag-alloy multifilamentary round wires

Peng Chen et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2017)

添加到收藏夹

Article Physics, Applied

Fabrication, microstructure and persistent current measurement of an intermediate grown superconducting (iGS) joint between REBCO-coated conductors

K. Ohki et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2017)

添加到收藏夹

Article Engineering, Electrical & Electronic

Performance of an HTS Persistent Current System for REBCO Pancake Coil

Kohki Takahashi et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2017)

添加到收藏夹

Review Physics, Applied

Persistent current joints between technological superconductors

G. D. Brittles et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2015)

添加到收藏夹

Article Engineering, Electrical & Electronic

A Test System for Superconducting Joints Based on GM Cryocooler

Dongsheng Ni et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

A superconducting joint for GdBa2Cu3O7 -δ-coated conductors

Yeonjoo Park et al.

NPG ASIA MATERIALS (2014)

添加到收藏夹

Article Thermodynamics

Electrical properties of cold-pressing welded NbTi persistent joints

Jianhua Liu et al.

CRYOGENICS (2013)

添加到收藏夹

Review Physics, Applied

Present Status and Future Perspective of Bismuth-Based High-Temperature Superconducting Wires Realizing Application Systems

Ken-ichi Sato et al.

JAPANESE JOURNAL OF APPLIED PHYSICS (2012)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.