4.8 Article

Enabling metal substrates for garnet-based composite cathodes by laser sintering

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Nanoscience & Nanotechnology

Thermal Recovery of the Electrochemically Degraded LiCoO2/ Li7La3Zr2O12:Al,Ta Interface in an All-Solid-State Lithium Battery

Martin Ihrig et al.

Summary: All-solid-state lithium batteries are promising for energy storage, but suffer from performance degradation during cycling. This study shows that thermal recovery can recrystallize the amorphized interface, restoring the cell performance. Detailed analysis and thermodynamic modeling provide a comprehensive understanding of the structural and chemical changes. Through thermal recovery, more than 80% of the initial storage capacity can be recovered, offering potential for cost-efficient recycling of ceramic all-solid-state batteries.

ACS APPLIED MATERIALS & INTERFACES (2023)

Article Chemistry, Physical

The influence of hafnium impurities on the electrochemical performance of tantalum substituted Li7La3Zr2O12 solid electrolytes

Markus Mann et al.

Summary: LLZO is a promising oxide-ceramic solid electrolyte for all-solid-state batteries, with dopants like Al, Ta, Nb, Ga, and W enhancing its ionic conductivity. The study investigates the impact of hafnium impurities on tantalum-doped LLZO, finding that hafnium has limited effect on the material's performance up to a certain concentration level. This research has implications for reducing the cost of LLZO by using lower grade zirconium sources.

IONICS (2022)

Article Chemistry, Physical

Free standing dual phase cathode tapes - scalable fabrication and microstructure optimization of garnet-based ceramic cathodes

Melanie Rosen et al.

Summary: Research demonstrates that by shifting battery design and optimizing microstructure, the energy density of ceramic-based all-solid-state batteries can be improved. The use of a new fabrication method allows for industrial relevance in oxide garnet-based systems. Additionally, the materials exhibit sufficient stability to be applied to higher energy density full cells.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Nanoscience & Nanotechnology

Study of LiCoO2/Li7La3Zr2O12:Ta Interface Degradation in All-Solid-State Lithium Batteries

Martin Ihrig et al.

Summary: The garnet-type Li7La3Zr2O12 (LLZO) ceramic solid electrolyte has high Li-ion conductivity and chemical stability at room temperature. However, capacity fading during cycling is a common issue. Investigation of the LiCoO2/LLZO interface revealed electrochemically driven cation diffusion, leading to the formation of an amorphous secondary phase interlayer with high impedance and causing capacity fading. Thermodynamic analysis also suggests the formation of low- or non-conducting secondary phases during cycling, further contributing to capacity fading. Understanding this degradation process is crucial for improving the cycling stability of garnet-based all-solid-state Li batteries.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Materials Science, Multidisciplinary

Rapid thermal sintering of screen-printed LiCoO2 films

Walter Sebastian Scheld et al.

Summary: A rapid photonic sintering process was used to obtain compact films of cathode active material of lithium batteries. The films showed homogeneous densification and structural consistency, and exhibited good electrochemical activity.

THIN SOLID FILMS (2022)

Article Chemistry, Physical

Rapid thermal processing of garnet-based composite cathodes

Walter Sebastian Scheld et al.

Summary: Rapid thermal annealing techniques are promising for processing ceramic materials, especially those containing elements with high vapor pressure. In this study, the sintering method RTP was used to fabricate composite ceramic cathodes of LLZO and LCO, effectively mitigating secondary phase formation between the two materials.

JOURNAL OF POWER SOURCES (2022)

Article Chemistry, Physical

Study of thermal material properties for Ta- and Al-substituted Li7La3Zr2O12 (LLZO) solid-state electrolyte in dependency of temperature and grain size

Julian Neises et al.

Summary: This study experimentally investigates the thermal material parameters of LLZO, including thermal conductivity and specific heat capacity. The results reveal a specific heat capacity of 0.55-0.80 J g(-1) K-1 for LLZO between room temperature and 1225 K. Decomposition of LLZO to La2Zr2O7 phase is observed between 1500 K and 1750 K. Grain size is found to affect the thermal conductivity.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Engineering, Industrial

Morphology, microstructure, and phase states in selective laser sintered lithium ion battery cathodes

Katherine A. Acord et al.

Summary: The study demonstrates the direct fabrication of 3D lithium nickel cobalt aluminum oxide (NCA) cathodes using selective laser sintering (SLS) technique without the need for binder additives. By optimizing process parameters and implementing in-situ substrate heating during printing, high-performance cathode materials with complex geometries can be achieved.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

Article Chemistry, Physical

Evaluation of Scalable Synthesis Methods for Aluminum-Substituted Li7La3Zr2O12 Solid Electrolytes

Markus Mann et al.

Summary: Solid electrolyte plays a crucial role in all-solid-state batteries, with lithium-stuffed garnet material like LLZO being considered a promising candidate due to its high Li-conductivity and stability. Different synthesis methods were compared for aluminum-substituted LLZO, focusing on electrochemical performance, scalability, and environmental impact. Wet-chemical synthesis methods were found to reduce calcination time and show potential for mass production.

MATERIALS (2021)

Article Chemistry, Physical

Photonic methods for rapid crystallization of LiMn2O4 cathodes for solid-state thin-film batteries

Xubin Chen et al.

Summary: This research compared the effectiveness of photonic-based cathode crystallization methods (FLA and UV laser) with thermal annealing for LiMn2O4 thin-film cathodes, showing that FLA and UV laser can crystallize LMO cathodes in a shorter period of time and with comparable performance to thermal processing.

JOURNAL OF POWER SOURCES (2021)

Article Chemistry, Physical

Polymer-Ceramic Composite Cathode with Enhanced Storage Capacity Manufactured by Field-Assisted Sintering and Infiltration

Martin Ihrig et al.

Summary: The polymer-ceramic composite cathodes play a crucial role in enhancing the energy storage capacity of all-solid-state Li batteries. The modified field-assisted sintering technique allows for the fabrication of porous cathodes at a reduced temperature without side phase formation, resulting in a porous composite network suitable for polymer infiltration and assembly in an ASSLB from the cathode side. The infiltrated ceramic composite cathodes have shown an improved areal storage capacity.

ACS APPLIED ENERGY MATERIALS (2021)

Article Materials Science, Ceramics

Li7La3Zr2O12 solid electrolyte sintered by the ultrafast high-temperature method

Martin Ihrig et al.

Summary: All-solid-state Li batteries with garnet LLZO as solid electrolyte show stability against Li metal, but challenges exist in integrating it due to high temperature and long dwell time for sintering. Advanced sintering techniques like Ultrafast High-temperature Sintering can significantly increase sintering rates, but demixing at grain boundaries may occur during sintering in vacuum and Ar atmosphere.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Review Chemistry, Multidisciplinary

Garnet-Type Solid-State Electrolytes: Materials, Interfaces, and Batteries

Chengwei Wang et al.

CHEMICAL REVIEWS (2020)

Review Energy & Fuels

Fabrication of high-quality electrode films for solid oxide fuel cell by screen printing: A review on important processing parameters

Nurul Akidah Baharuddin et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)

Article Multidisciplinary Sciences

Garnet-Based All-Ceramic Lithium Battery Enabled by Li2.985B0.005OCl Solder

Wuliang Feng et al.

ISCIENCE (2020)

Article Materials Science, Ceramics

Study of the ionic conductivity of Li0.5La0.5TiO3 laser-sintered ceramics

J. H. L. Silva et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Article Chemistry, Multidisciplinary

Thermal and Structural Stabilities of LixCoO2 Cathode for Li Secondary Battery Studied by a Temperature Programmed Reduction

D. -H. Jung et al.

EURASIAN CHEMICO-TECHNOLOGICAL JOURNAL (2019)

Article Nanoscience & Nanotechnology

High Capacity Garnet-Based All-Solid-State Lithium Batteries: Fabrication and 3D-Microstructure Resolved Modeling

Martin Finsterbusch et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Materials Science, Ceramics

Cathode-electrolyte material interactions during manufacturing of inorganic solid-state lithium batteries

Sven Uhlenbruck et al.

JOURNAL OF ELECTROCERAMICS (2017)

Article Materials Science, Multidisciplinary

Laser-based functionalization of electronic multi-material-layers for embedded sensors

Christian Vedder et al.

JOURNAL OF LASER APPLICATIONS (2017)

Article Spectroscopy

Thermodynamic CoO-Co3O4 crossover using Raman spectroscopy in magnetic octahedron-shaped nanocrystals

Beatriz Rivas-Murias et al.

JOURNAL OF RAMAN SPECTROSCOPY (2017)

Article Chemistry, Physical

Electrochemical Window of the Li-Ion Solid Electrolyte Li7La3Zr2O12

Travis Thompson et al.

ACS ENERGY LETTERS (2017)

Article Materials Science, Ceramics

Elastic properties of lithium cobalt oxide (LiCoO2)

Eric Jianfeng Cheng et al.

JOURNAL OF ASIAN CERAMIC SOCIETIES (2017)

Article Nanoscience & Nanotechnology

Gallium-Doped Li7La3Zr2O12 Garnet-Type Electrolytes with High Lithium-Ion Conductivity

Jian-Fang Wu et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Nanoscience & Nanotechnology

About the Compatibility between High Voltage Spinel Cathode Materials and Solid Oxide Electrolytes as a Function of Temperature

Lincoln Miara et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Electrochemistry

High performance screen printable lithium-ion battery cathode ink based on C-LiFePO4

R. E. Sousa et al.

ELECTROCHIMICA ACTA (2016)

Review Engineering, Electrical & Electronic

A review of thermal processing in the subsecond range: semiconductors and beyond

Lars Rebohle et al.

SEMICONDUCTOR SCIENCE AND TECHNOLOGY (2016)

Editorial Material Energy & Fuels

A solid future for battery development

Juergen Janek et al.

NATURE ENERGY (2016)

Article Chemistry, Physical

First-Principles Studies on Cation Dopants and ElectrolytelCathode Interphases for Lithium Garnets

Lincoln J. Miara et al.

CHEMISTRY OF MATERIALS (2015)

Article Chemistry, Physical

Thermal expansion in the garnet-type solid electrolyte (Li7-xAlx/3)La3Zr2O12 as a function of Al content

Aude A. Hubaud et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Article Materials Science, Ceramics

High conductivity of mixed phase Al-substituted Li7La3Zr2O12

Chih-Long Tsai et al.

JOURNAL OF ELECTROCERAMICS (2015)

Article Chemistry, Physical

Raman diagnostics of LiCoO2 electrodes for lithium-ion batteries

Toni Gross et al.

JOURNAL OF POWER SOURCES (2014)

Article Multidisciplinary Sciences

Electrochemically tunable thermal conductivity of lithium cobalt oxide

Jiung Cho et al.

NATURE COMMUNICATIONS (2014)

Article Electrochemistry

Visualization of the State-of-Charge Distribution in a LiCoO2 Cathode by In Situ Raman Imaging

Toshio Nishi et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Article Electrochemistry

Lanthanum-doped LiCoO2 cathode with high rate capability

Paromita Ghosh et al.

ELECTROCHIMICA ACTA (2009)

Article Chemistry, Multidisciplinary

Fast lithium ion conduction in garnet-type Li7La3Zr2O12

Ramaswamy Murugan et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2007)

Review Electrochemistry

Current collectors for positive electrodes of lithium-based batteries

AH Whitehead et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)

Article Chemistry, Inorganic & Nuclear

Structural study of the T#2-LixCoO2 (0.52 < x ≤ 0.72) phase

D Carlier et al.

INORGANIC CHEMISTRY (2004)

Article Automation & Control Systems

Lasers and materials in selective laser sintering

JP Kruth et al.

ASSEMBLY AUTOMATION (2003)

Article Thermodynamics

Low temperature heat capacity and thermodynamic functions of LiCoO2

H Kawaji et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2002)