☆ 4.8 Article

Biselenophene Imide: Enabling Polymer Acceptor with High Electron Mobility for High-Performance All-Polymer Solar Cells

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Alkoxy Substitution on Asymmetric Conjugated Molecule Enabling over 18% Efficiency in Ternary Organic Solar Cells by Reducing Nonradiative Voltage Loss

Lin Xie et al.

Summary: A ternary strategy is proposed to enhance the performance of organic photovoltaics. By using three asymmetric skeleton nonfullerene acceptors as the third component in the host system, the structure-performance correlation is thoroughly investigated. The results demonstrate that alkoxy-substituted TB-S1-O exhibits the highest efficiency of 18.14%, outperforming TB-S (16.16%) and TB-S1 (16.18%). This study reveals the efficacy of alkoxy substitution for constructing the third component in high-performance ternary organic solar cells.

ACS ENERGY LETTERS (2023)

添加到收藏夹

Article Nanoscience & Nanotechnology

n-Type Polymer Semiconductors Based on Dithienylpyrazinediimide

Suxiang Ma et al.

Summary: We report a strongly electron-deficient dithienylpyrazinediimide (TPDI) and its n-type semiconducting polymers, which exhibit n-type transport character with an electron mobility of up to 0.44 cm2 V-1 s-1 in organic thin-film transistors. The incorporation of pyrazine into imide-functionalized (hetero)arenes is an effective strategy to develop high-performance n-type polymers for organic optoelectronic devices.

ACS APPLIED MATERIALS & INTERFACES (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Polymerized Small Molecular Acceptor with Branched Side Chains for All Polymer Solar Cells with Efficiency over 16.7%

Yun Li et al.

Summary: This study successfully achieved efficient all-polymer solar cells by designing and synthesizing a series of polymer acceptors. Through the investigation of the structure-property relationship of polymer acceptors, new insights into polymer acceptors were provided, and a feasible approach to develop efficient conjugated polymer acceptors was paved.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

16.3% Efficiency binary all-polymer solar cells enabled by a novel polymer acceptor with an asymmetrical selenophene-fused backbone

Huiting Fu et al.

Summary: A novel polymer acceptor, PYT-1S1Se, designed with an asymmetrical selenophene-fused framework, has been shown to optimize optical absorption and electronic properties in all-polymer solar cells. Compared with other analogs, all-PSCs derived from PYT-1S1Se demonstrate improved J(sc) and V-oc metrics, resulting in a record-high power conversion efficiency of 16.3%.

SCIENCE CHINA-CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Physical

Near-infrared absorbing polymer acceptors enabled by selenophene-fused core and halogenated end-group for binary all-polymer solar cells with efficiency over 16%

Qunping Fan et al.

Summary: Recent advances in all-polymer solar cells have been hindered by the lack of polymerized small-molecule acceptors with desirable optoelectronic properties, particularly in capturing near-infrared photons. By developing novel near-infrared absorbing PSMAs with halogenated end-groups, researchers have managed to significantly enhance the performance of all-PSCs, achieving impressive power conversion efficiencies and high short-circuit current densities. The introduction of chlorination in the end-group of the acceptors has shown great potential in practical applications of efficient all-PSCs, emphasizing the importance of optimizing optoelectronic properties for enhanced device performance.

NANO ENERGY (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Vinylene-Linker-Based Polymer Acceptor Featuring a Coplanar and Rigid Molecular Conformation Enables High-Performance All-Polymer Solar Cells with Over 17% Efficiency

Han Yu et al.

Summary: This study reports a high-performance polymer acceptor based on vinylene linkers, which exhibit a more coplanar and rigid molecular conformation compared to traditional thiophene-based acceptors. This leads to higher mobility and reduced energetic disorder. Furthermore, the blend based on this polymer acceptor demonstrates high domain purity, resulting in a better fill factor in all-polymer solar cells.

ADVANCED MATERIALS (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Polymer Acceptors for High-Performance All-Polymer Solar Cells

Suxiang Ma et al.

Summary: All-polymer solar cells have shown excellent mechanical flexibility and device stability compared to other organic solar cells. This review summarizes the recent progress of polymer acceptors based on electron-deficient building blocks, and discusses the structure-property correlations and the development of new building blocks for efficient all-polymer solar cells.

CHEMISTRY-A EUROPEAN JOURNAL (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Over 16% efficiency all-polymer solar cells by sequential deposition

Bangbang Li et al.

Summary: All-polymer solar cells (all-PSCs) have excellent mechanical robustness and performance stability, but their power conversion efficiency (PCE) still lags behind that of organic solar cells (OSCs) based on non-fullerene small molecule acceptors. In this study, highly efficient all-PSCs were achieved via sequential deposition (SD) with donor and acceptor layers coated sequentially to optimize the film microstructure.

SCIENCE CHINA-CHEMISTRY (2022)

添加到收藏夹

Article Multidisciplinary Sciences

High performance polymerized small molecule acceptor by synergistic optimization on π-bridge linker and side chain

Guangpei Sun et al.

Summary: The modification of small molecule acceptor building block and the pi-bridge linker is an effective strategy to improve the photovoltaic performance of polymer acceptors. In this work, a new polymer acceptor PG-IT2F was synthesized with improved power conversion efficiency in polymer solar cells.

NATURE COMMUNICATIONS (2022)

添加到收藏夹

Review Chemistry, Physical

Y-Series-Based Polymer Acceptors for High- Performance All-Polymer Solar Cells in Binary and Non

Meenal Kataria et al.

Summary: Recently, all-polymer solar cells have made significant progress in terms of efficiency and performance, achieving a high power conversion efficiency through the use of innovative polymer acceptors.

ACS ENERGY LETTERS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Polymerizing small molecular acceptors for efficient all-polymer solar cells

Yuxin Kong et al.

Summary: This article focuses on the importance of controlling the regioregularity of polymerized small molecular acceptors (PSMAs) in all-polymer solar cells (all-PSCs). The integration of regioregular PSMAs improves the absorption, backbone ordering, and blend morphology of the polymer acceptors compared to regiorandom ones. These regioregular PSMAs also enable repeatable synthesis and reproducible device performance, which is essential for scaling-up and commercializing all-PSCs. The article discusses the challenges and prospects of PSMAs as a new platform for advancing all-PSCs.

INFOMAT (2022)

添加到收藏夹

Editorial Material Physics, Condensed Matter

All-polymer solar cells

Baoqi Wu et al.

JOURNAL OF SEMICONDUCTORS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Selenium-Containing Organic Photovoltaic Materials

Baobing Fan et al.

Summary: Organic photovoltaics (OPVs) with a blend of organic donor and acceptor species have good potential for scalability challenges, and the delicate design of the materials significantly enhances their performance. Incorporating selenium atoms into organic conjugated materials is an effective way to lower the optical band gap and improve charge carrier mobility in the solid state, leading to higher efficiency in OPV devices.

ACCOUNTS OF CHEMICAL RESEARCH (2021)

添加到收藏夹

Article Chemistry, Physical

Highly Efficient and Stable All-Polymer Solar Cells Enabled by Near-Infrared Isomerized Polymer Acceptors

Tao Wang et al.

Summary: This study investigated the effects of regioisomerized structures on the molecular and photovoltaic properties of near-infrared polymer acceptors (P(A)s) constructed from n-type fused-ring electron acceptors (FREAs). The results showed that the PYTT-2 system had the best photovoltaic performance and stability among the three isomeric FREA-based P(A)s.

CHEMISTRY OF MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Cyano-Functionalized Bithiophene Imide-Based n-Type Polymer Semiconductors: Synthesis, Structure-Property Correlations, and Thermoelectric Performance

Kui Feng et al.

Summary: In this study, a series of novel acceptor building blocks, CNI, CNTI, and CNDTI, were successfully developed by introducing strong electron-withdrawing cyano functionality on BTI and its derivatives. Based on these novel building blocks, high-performance n-type polymers with deep-positioned LUMOs were synthesized, showing excellent stability and doping efficiency. These polymers exhibit the highest electrical conductivity of 23.3 S m-1 and a power factor of up to 10 mu W m-1 K-2, which are among the highest values reported for solution-processed molecularly n-doped polymers.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

添加到收藏夹

Article Chemistry, Physical

Efficient, Thermally Stable, and Mechanically Robust All-Polymer Solar Cells Consisting of the Same Benzodithiophene Unit-Based Polymer Acceptor and Donor with High Molecular Compatibility

Jin-Woo Lee et al.

Summary: Researchers have developed a series of polymer acceptors based on non-fullerene small molecule acceptors, which show enhanced compatibility and performance when blended with high-performance polymer donors.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Regio-Regular Polymer Acceptors Enabled by Determined Fluorination on End Groups for All-Polymer Solar Cells with 15.2 % Efficiency

Han Yu et al.

Summary: The two regio-regular polymer acceptors synthesized in this study show significant performance difference, with PYF-T-o exhibiting better photon absorption and more ordered inter-chain packing, resulting in higher power conversion efficiency.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

High Efficiency (15.8%) All-Polymer Solar Cells Enabled by a Regioregular Narrow Bandgap Polymer Acceptor

Huiting Fu et al.

Summary: A new class of narrow-bandgap polymer acceptors, the PZT series, was developed to address challenges in all-polymer solar cells, resulting in improved performance due to red-shifted optical absorption and up-shifted energy levels. The regioregular PZT-gamma was specifically designed to avoid isomer formation during polymerization, leading to enhanced efficiency, short-circuit current density, and energy loss in all-PSCs.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

添加到收藏夹

Article Chemistry, Physical

π-Extended Conjugated Polymer Acceptor Containing Thienylene-Vinylene-Thienylene Unit for High-Performance Thick-Film All-Polymer Solar Cells with Superior Long-Term Stability

Jiabin Zhang et al.

Summary: Novel polymerized small molecular acceptors, PJTVT and PJTET, were designed with conjugated and unconjugated linking units respectively, demonstrating improved efficiency and stability for all-polymer solar cells through molecular modulation in the linking unit of the polymer acceptor.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

High-Efficiency All-Polymer Solar Cells with Poly-Small-Molecule Acceptors Having π-Extended Units with Broad Near-IR Absorption

Ning Su et al.

Summary: Two new poly-small-molecule acceptors, PYN-BDT and PYN-BDTF, with p-extended naphthalene rings, demonstrated broad optical cross-section macromolecular absorbers in all-polymer solar cells, leading to enhanced power conversion efficiencies. The blend morphology, GIWAXS, charge transport, exciton and carrier dynamics, and impedance-based analysis show that extending individual polymer acceptor blocks represents an efficient strategy to achieve high-performance cells with enhanced metrics.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Difluoro-Monobromo End Group Enables High-Performance Polymer Acceptor and Efficient All-Polymer Solar Cells Processable with Green Solvent under Ambient Condition

Han Yu et al.

Summary: This study successfully increased the efficiency of all-polymer solar cells to 15.22% by designing and synthesizing a new polymer acceptor PY2F-T, demonstrating the effectiveness of fluorination strategy in improving photon absorption and charge mobility. Additionally, devices based on PY2F-T showed smaller domain spacing and higher domain purity, effectively suppressing charge recombination.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Distannylated Monomer of a Strong Electron-Accepting Organoboron Building Block: Enabling Acceptor-Acceptor-Type Conjugated Polymers for n-Type Thermoelectric Applications

Changshuai Dong et al.

Summary: Acceptor-acceptor (A-A) copolymerization is an effective strategy to develop high-performance n-type conjugated polymers. By synthesizing a strong electron-deficient BNBP monomer, A-A type conjugated polymers with ultralow LUMO energy levels were successfully developed via Stille polycondensation, showing promising thermoelectric properties. This demonstrates the great potential of A-A type organoboron polymers for high-performance n-type thermoelectrics.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Regioregular Narrow-Bandgap n-Type Polymers with High Electron Mobility Enabling Highly Efficient All-Polymer Solar Cells

Huiliang Sun et al.

Summary: The study successfully improved the efficiency of all-polymer solar cells by synthesizing narrow-bandgap polymer acceptors with regular structures. By introducing a ternary system with different components, further optimization of blend morphology and charge transport was achieved, leading to an enhanced power conversion efficiency.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-performance all-polymer solar cells enabled by a novel low bandgap non-fully conjugated polymer acceptor

Qunping Fan et al.

Summary: A novel non-fully conjugated polymer acceptor PFY-2TS with a low bandgap was developed and showed improved performance in all-polymer solar cells with a PCE of 12.31% and reduced energy loss. This study demonstrated that non-fully conjugated polymers as a new class of acceptor materials are very promising for the development of high-performance all-polymer solar cells.

SCIENCE CHINA-CHEMISTRY (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Polymerized small molecular acceptor based all-polymer solar cells with an efficiency of 16.16% via tuning polymer blend morphology by molecular design

Jiaqi Du et al.

Summary: Recent advancements have been made in all-polymer solar cells (all-PSCs) based on polymerized small molecular acceptors (PSMAs). Two new A-DA'D-A small molecule acceptor based PSMAs, PS-Se and PN-Se, were synthesized to study the impact of molecular structure on photovoltaic performance. Cryogenic transmission electron microscopy and photoinduced force microscopy revealed the aggregation behavior and morphology of the polymer and acceptor blend films, leading to higher power conversion efficiency in all-PSCs.

NATURE COMMUNICATIONS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Comparative Study of Selenophene- and Thiophene-Containing n-Type Semiconducting Polymers for High Performance All-Polymer Solar Cells

Xiaomei Ding et al.

Summary: The study demonstrates that the substitution of selenophene for thiophene in donor-acceptor copolymers enhances the intrinsic polymer properties and the performance of all-polymer solar cells incorporating them.

ACS APPLIED POLYMER MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Distannylated Bithiophene Imide: Enabling High-Performance n-Type Polymer Semiconductors with an Acceptor-Acceptor Backbone

Yongqiang Shi et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Polymer Acceptors Containing B←N Units for Organic Photovoltaics

Ruyan Zhao et al.

ACCOUNTS OF CHEMICAL RESEARCH (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-Performance All-Polymer Solar Cells Enabled by n-Type Polymers with an Ultranarrow Bandgap Down to 1.28 eV

Kui Feng et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Narrow-Bandgap n-Type Polymer with an Acceptor-Acceptor Backbone Enabling Efficient All-Polymer Solar Cells

Huiliang Sun et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Deciphering the Role of Chalcogen-Containing Heterocycles in Nonfullerene Acceptors for Organic Solar Cells

Gaoda Chai et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Precisely Controlling the Position of Bromine on the End Group Enables Well-Regular Polymer Acceptors for All-Polymer Solar Cells with Efficiencies over 15%

Zhenghui Luo et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Mesopolymer synthesis by ligand-modulated direct arylation polycondensation towards n-type and ambipolar conjugated systems

Zhenjie Ni et al.

NATURE CHEMISTRY (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Recent Advances, Design Guidelines, and Prospects of All-Polymer Solar Cells

Changyeon Lee et al.

CHEMICAL REVIEWS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Narrow-Bandgap n-Type Polymer Semiconductor Enabling Efficient All-Polymer Solar Cells

Shengbin Shi et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Polymer Science

Bichalcogenophene Imide-Based Homopolymers: Chalcogen-Atom Effects on the Optoelectronic Property and Device Performance in Organic Thin-Film Transistors

Shengbin Shi et al.

MACROMOLECULES (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Surpassing the 10% efficiency milestone for 1-cm2 all-polymer solar cells

Baobing Fan et al.

NATURE COMMUNICATIONS (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

All-Polymer Solar Cells: Recent Progress, Challenges, and Prospects

Gang Wang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Recent Advances in n-Type Polymers for All-Polymer Solar Cells

Zewdneh Genene et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Increase in efficiency on using selenophene instead of thiophene in -bridges for D--DPP--D organic solar cells

Virginia Cuesta et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

(Semi)ladder-Type Bithiophene Imide-Based All-Acceptor Semiconductors: Synthesis, Structure-Property Correlations, and Unipolar n-Type Transistor Performance

Yingfeng Wang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

添加到收藏夹

Article Polymer Science

Tuning the Energy Levels of Aza-Heterocycle-Based Polymers for Long-Term n-Channel Bottom-Gate/Top-Contact Polymer Transistors

Suxiang Ma et al.

MACROMOLECULES (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Highly Flexible and Efficient All-Polymer Solar Cells with High-Viscosity Processing Polymer Additive toward Potential of Stretchable Devices

Shanshan Chen et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Constructing a Strongly Absorbing Low-Bandgap Polymer Acceptor for High-Performance All-Polymer Solar Cells

Zhi-Guo Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Side Group Engineering of Small Molecular Acceptors for High-Performance Fullerene-Free Polymer Solar Cells: Thiophene Being Superior to Selenophene

Wei Gao et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

添加到收藏夹

Review Chemistry, Multidisciplinary

From Fullerene-Polymer to All-Polymer Solar Cells: The Importance of Molecular Packing, Orientation, and Morphology Control

Hyunbum Kang et al.

ACCOUNTS OF CHEMICAL RESEARCH (2016)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.