4.8 Article

Acidic Media Impedes Tandem Catalysis Reaction Pathways in Electrochemical CO2 Reduction

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Nanoscience & Nanotechnology

Coverage-driven selectivity switch from ethylene to acetate in high-rate CO2/CO electrolysis

Pengfei Wei et al.

Summary: Tuning catalyst microenvironments by electrolytes and organic modifications improves the performance of CO2 electrolysis. The influence of mixed CO/CO2 feeds from incomplete industrial combustion on catalyst microenvironments has been investigated. CO/CO2 co-electrolysis over CuO nanosheets was studied in an alkaline membrane electrode assembly electrolyser. The optimized conditions achieved high Faradaic efficiency, partial current density, selectivity, and yield, outperforming thermocatalytic CO hydrogenation. The scale-up demonstration using an electrolyser stack showed high rates of ethylene and acetate formation.

NATURE NANOTECHNOLOGY (2023)

Article Energy & Fuels

Energy- and carbon-efficient CO2/CO electrolysis to multicarbon products via asymmetric ion migration-adsorption

Adnan Ozden et al.

Summary: Carbon dioxide/monoxide (CO2/CO) electrolysis has the potential to convert emissions into multicarbon products, but current systems suffer from low energy and carbon efficiencies. In this study, the researchers identified uncontrolled gas/ion distributions as the source of these inefficiencies and developed a strategy to block cation migration to the catalyst surface using a covalent organic framework (COF). The COF-mediated catalyst achieved a single-pass carbon efficiency of 95%, an energy efficiency of 40%, and a current density of 240 mA cm(-2) during 200 hours of electrosynthesis of multicarbon products from CO.

NATURE ENERGY (2023)

Article Chemistry, Multidisciplinary

Decrypting the Controlled Product Selectivity over Ag-Cu Bimetallic Surface Alloys for Electrochemical CO2 Reduction

Daixing Wei et al.

Summary: Electrochemical CO2 reduction reaction (ECO2RR) with controlled product selectivity was achieved on Ag-Cu bimetallic surface alloys. By tuning surface compositions and applied potentials, high selectivity towards C2 hydrocarbons/alcohols (approximate to 60% FE), C1 hydrocarbons/alcohols (approximate to 41% FE), and CO (approximate to 74% FE) was obtained. The d-band center dependent on surface composition could regulate the *CO binding strengths and subsequent reaction pathways, while adjusting the applied potentials altered the energy of participated electrons, leading to controlled ECO2RR selectivity towards desired products. A predominant region map and an indicator for evaluating the thermodynamic predominance of the *CO subsequent reactions were proposed as theoretical guidance for controllable ECO2RR product selectivity over bimetallic alloys.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2023)

Article Chemistry, Physical

Hierarchical Ag-Cu interfaces promote C-C coupling in tandem CO2 electroreduction

Zhizhou Cai et al.

Summary: By utilizing the atomic arrangement in immiscible Ag-Cu composite during annealing, hierarchical interfaces were established in the core-shell catalyst, which increased the electrochemical surface area and expedited charge dynamics. This resulted in an unprecedented electro-catalytic performance with a faradaic efficiency of 80.2% and 52.6% for C2+ products, ethanol, and a current density of -320 mA cm-2 at -1.0 V (versus reversible hydrogen electrode). Furthermore, the Ag-Cu catalyst exhibited notable stability for 60 hours. Mechanism studies revealed the preferential accumulation of local CO intermediates on the core, followed by migration to the continuous Cu surface for energy-favorable C-C coupling towards ethanol production. Our work highlights interface engineering as a novel design principle for advanced tandem electrocatalysts.

APPLIED CATALYSIS B-ENVIRONMENTAL (2023)

Article Chemistry, Physical

Unlocking direct CO2 electrolysis to C3 products via electrolyte supersaturation

Kun Qi et al.

Summary: A supersaturation strategy was employed to electrosynthesize 2-propanol from CO2 using highly carbonated electrolytes. The CuAg alloy catalyst exhibited high performance for 2-propanol production with a faradaic efficiency of 56.7% and at a specific current density of 59.3 mA cm(-2).

NATURE CATALYSIS (2023)

Article Chemistry, Physical

Local microenvironment tuning induces switching between electrochemical CO2 reduction pathways

Surani Bin Dolmanan et al.

Summary: Gas diffusion layers (GDL) are crucial in electrochemical CO2 reduction (CO2R) systems to achieve high current densities. It is commonly believed that the choice of catalyst and electrolyte is more important than GDL in determining product selectivity. However, our study shows that adjusting GDL pore size can significantly impact catalytic outcomes by controlling the local microenvironment of the catalyst. Experimental and simulation results demonstrate that smaller pore sizes promote the generation of formate instead of CO due to the influence of pore size on CO2 mass transport and local pH at the electrode. This highlights the importance of the local microenvironment as a tunable parameter for controlling product selectivity in the design of CO2R systems.

JOURNAL OF MATERIALS CHEMISTRY A (2023)

Article Chemistry, Multidisciplinary

Selective production of ethylene from CO2 over CuAg tandem electrocatalysts

Ye Eun Jeon et al.

Summary: The bimetallic catalyst Cu90Ag10 shows excellent electrocatalytic performance in CO2RR, enhancing both C2H4 Faradaic efficiency and C2H4 current density, as well as promoting C2H4 synthesis through the desorption-re-adsorption and diffusion process of CO on the Cu surface.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2022)

Article Chemistry, Multidisciplinary

Correlating CO Coverage and CO Electroreduction on Cu via High- Pressure in Situ Spectroscopic and Reactivity Investigations

Jiajie Hou et al.

Summary: This study reveals for the first time the upper limit of CO coverage on Cu surfaces under electrocatalytic conditions, and shows that an increase in CO coverage can affect the selectivity of CO reduction reactions.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2022)

Article Chemistry, Physical

High carbon utilization in CO2 reduction to multi-carbon products in acidic media

Yi Xie et al.

Summary: Renewable electricity-powered CO2 reduction to multi-carbon (C2+) products is a promising route for low-carbon-footprint fuels and chemicals. Acidic conditions offer a solution to the consumption of input CO2 by the electrolyte, but also promote the hydrogen evolution reaction. This study presents a design strategy that suppresses the activity of hydrogen evolution reaction by maximizing the co-adsorption of CO and CO2 on Cu-based catalysts.

NATURE CATALYSIS (2022)

Article Chemistry, Physical

Exploration of the bio-analogous asymmetric C-C coupling mechanism in tandem CO2 electroreduction

Chubai Chen et al.

Summary: This study demonstrates the possibility of achieving asymmetric C-C coupling on a copper surface and thereby promoting the conversion of CO2 into multicarbon oxygenates. By adjusting the generation rates of CH4 and CO, the production rate of oxygenates can be maximized.

NATURE CATALYSIS (2022)

Article Chemistry, Multidisciplinary

Tandem effect of Ag@C@Cu catalysts enhances ethanol selectivity for electrochemical CO2 reduction in flow reactors

Jie Zhang et al.

Summary: In this study, Ag@C@Cu core-shell catalysts were synthesized to isolate the influence of the tandem effect on the selectivity of multi-carbon products. It was found that the locally increased CO concentration promoted the formation of ethanol and the selectivity of ethanol was optimized by tuning the thickness of the Cu shell.

CELL REPORTS PHYSICAL SCIENCE (2022)

Article Nanoscience & Nanotechnology

An industrial perspective on catalysts for low-temperature CO2 electrolysis

Richard I. Masel et al.

Summary: This Perspective discusses the key advances in nanocatalysts that have led to significant progress in the electrochemical conversion of CO2 to useful products, providing benchmarks for comparison and highlighting the need for further research.

NATURE NANOTECHNOLOGY (2021)

Article Chemistry, Physical

Theory-Guided Enhancement of CO2 Reduction to Ethanol on Ag-Cu Tandem Catalysts via Particle-Size Effects

Pranit Iyengar et al.

Summary: By utilizing theoretical considerations and experimental validation, this study designed an electrocatalyst with higher selectivity towards ethanol in CO2 reduction reaction. Through investigating the catalytic behavior of Cu nano-cubes of different sizes, it was predicted that smaller Cu-cub possess higher selectivity for ethanol due to their larger edge-to-faces ratio.

ACS CATALYSIS (2021)

Review Chemistry, Multidisciplinary

Designing Copper-Based Catalysts for Efficient Carbon Dioxide Electroreduction

Yuhang Wang et al.

Summary: The review highlights the recent advances in Cu-catalyzed CO2 electroreduction, focusing on catalyst design and strategies to promote key steps. Challenges in understanding reaction mechanisms and real-time investigations are also addressed.

ADVANCED MATERIALS (2021)

Article Chemistry, Physical

Elucidating the Facet-Dependent Selectivity for CO2 Electroreduction to Ethanol of Cu-Ag Tandem Catalysts

Pranit Iyengar et al.

Summary: This study elucidates the active sites for ethanol production on Cu-Ag CO2RR tandem catalysts using structural sensitivity effects, showing how ethanol and ethylene formation pathways exhibit selectivity differences in a CO-enriched environment. The findings highlight the potential of tandem catalysis and structure-sensitive effects to significantly alter the selectivity of electrochemical reactions.

ACS CATALYSIS (2021)

Article Multidisciplinary Sciences

CO2 electrolysis to multicarbon products in strong acid

Jianan Erick Huang et al.

Summary: Carbon dioxide electroreduction (CO2R) is being actively studied as a promising route to convert carbon emissions to valuable chemicals and fuels. A study found that concentrating potassium cations in the vicinity of electrochemically active sites accelerates CO2 activation to enable efficient CO2R in acid. The research achieved a high CO2R efficiency on copper at pH <1 with a single-pass CO2 utilization of 77%.

SCIENCE (2021)

Article Green & Sustainable Science & Technology

Techno-economic assessment of low-temperature carbon dioxide electrolysis

Haeun Shin et al.

Summary: This work provides a comprehensive techno-economic assessment of four major products of low-temperature CO2 electrolysis and prioritizes technological development with systematic guidelines to facilitate market deployment.

NATURE SUSTAINABILITY (2021)

Article Multidisciplinary Sciences

Molecular tuning of CO2-to-ethylene conversion

Fengwang Li et al.

NATURE (2020)

Editorial Material Multidisciplinary Sciences

The future of low-temperature carbon dioxide electrolysis depends on solving one basic problem

Joshua A. Rabinowitz et al.

NATURE COMMUNICATIONS (2020)

Review Chemistry, Multidisciplinary

Progress and Perspectives of Electrochemical CO2 Reduction on Copper in Aqueous Electrolyte

Stephanie Nitopi et al.

CHEMICAL REVIEWS (2019)

Review Chemistry, Physical

Designing materials for electrochemical carbon dioxide recycling

Michael B. Ross et al.

NATURE CATALYSIS (2019)

Article Chemistry, Physical

New aspects of operando Raman spectroscopy applied to electrochemical CO2 reduction on Cu foams

Shan Jiang et al.

JOURNAL OF CHEMICAL PHYSICS (2019)

Article Chemistry, Physical

Gas-Diffusion Electrodes for Carbon Dioxide Reduction: A New Paradigm

Drew Higgins et al.

ACS ENERGY LETTERS (2019)

Review Chemistry, Multidisciplinary

CO2 reduction on gas-diffusion electrodes and why catalytic performance must be assessed at commercially-relevant conditions

Thomas Burdyny et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Article Engineering, Chemical

General Techno-Economic Analysis of CO2 Electrolysis Systems

Matthew Jouny et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)

Review Chemistry, Physical

What Should We Make with CO2 and How Can We Make It?

Oleksandr S. Bushuyev et al.

Article Chemistry, Physical

The path towards sustainable energy

Steven Chu et al.

NATURE MATERIALS (2017)

Article Materials Science, Multidisciplinary

Size dependent spinodal decomposition in Cu-Ag nanoparticles

G. Radnoczi et al.

ACTA MATERIALIA (2017)

Article Materials Science, Multidisciplinary

Structure and phase separation of Ag-Cu alloy thin films

Hao Chen et al.

ACTA MATERIALIA (2007)

Review Chemistry, Physical

Designing Cu-Based Tandem Catalysts for CO2 Electroreduction Based on Mass Transport of CO Intermediate

Bo Cao et al.

Summary: Combining CO2 conversion on various catalysts with CO reduction on copper is a promising strategy to achieve high selectivity and formation rate of highly reduced products.

ACS CATALYSIS