4.8 Article

High-Strength, High-Barrier Bio-Based Polyester Nanocomposite Films by Binary Multiscale Boron Nitride Nanosheets

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Nanoscience & Nanotechnology

Ultralow Interfacial Thermal Resistance of Graphene Thermal Interface Materials with Surface Metal Liquefaction

Wen Dai et al.

Summary: Developing advanced thermal interface materials (TIMs) based on graphene is critical for solving the thermal management problem of high-power semiconductor devices. However, the current vertically aligned graphene TIMs have low heat transfer efficiency and limited contact area. In this study, a three-tiered TIM composed of vertically aligned graphene and liquid metal cap layers was designed, resulting in high thermal conductivity and increased effective contact area. This finding provides valuable guidance for the practical application of high-performance TIMs in electronic thermal management.

NANO-MICRO LETTERS (2023)

Article Chemistry, Multidisciplinary

Sustainable Mass Production of Ultrahigh-Aspect-Ratio Hexagonal Boron Nitride Nanosheets for High-Performance Composites

Hongran Zhao et al.

Summary: This study presents a sustainable mechanochemical exfoliation approach for the synthesis of large-size ultrathin hexagonal boron nitride nanosheets (BNNSs) with an ultrahigh aspect ratio and low defect degree. The obtained BNNSs show excellent disperse ability in liquids and the mechanism of edge-selective grafting is proposed. Furthermore, high-performance and transparent BNNSs/epoxy composites are successfully fabricated, exhibiting greatly improved anticorrosion and mechanical properties.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2023)

Article Chemistry, Multidisciplinary

Bio-inspired Multifunctional Graphene-Epoxy Anticorrosion Coatings by Low-Defect Engineered Graphene

Jiheng Ding et al.

Summary: In this study, a bio-inspired multilayered graphene-epoxy composite coating was fabricated using a scalable spraying approach. The composite coating exhibited good dispersity and structure repair capabilities, forming interlock structures to improve coating resistance. It also showed highly anisotropic thermal and electrical conductivities and the ability to self-monitor structural safety and health.

ACS NANO (2022)

Article Engineering, Environmental

Structure and performance insights in carbon dots-functionalized MXene-epoxy ultrathin anticorrosion coatings

Jiheng Ding et al.

Summary: Functionalized MXene nanosheets with carbon dots significantly improve the chemical stability of MXene in water and enhance the anticorrosion performance of epoxy composite coatings through a flow-induced approach. The unique structure of CD-Ti3C2Tx platelets inhibits corrosion-promotion activity and improves the stability and durability of the coatings for heavy-anticorrosion applications in harsh sea environments.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Multidisciplinary

Nacre-Inspired Nanocomposite Films with Enhanced Mechanical and Barrier Properties by Self-Assembly of Poly(Lactic Acid) Coated Mica Nanosheets

Zi-Meng Han et al.

Summary: Developing biodegradable materials is an important strategy to reduce reliance on non-degradable plastics. This study presents a method to prepare a high-performance biodegradable film with a brick and mortar structure. The resulting nanocomposite film shows excellent properties and potential practical applications in packaging.

ADVANCED FUNCTIONAL MATERIALS (2022)

Review Materials Science, Multidisciplinary

Layered double hydroxide (LDH) for multi-functionalized corrosion protection of metals: A review

Yanhui Cao et al.

Summary: This paper comprehensively reviews the recent developments in the field of corrosion and protection using layered double hydroxide (LDH), covering its unique characteristics, preparation methods, and applications in different environments. The paper also proposes new perspectives for future research in the corrosion and protection field.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Article Chemistry, Multidisciplinary

Enhanced Electromagnetic Shielding and Thermal Conductive Properties of Polyolefin Composites with a Ti3C2TX MXene/Graphene Framework Connected by a Hydrogen-Bonded Interface

Xue Tan et al.

Summary: The rapid advancement of miniaturized devices in terms of operation speed, transmission efficiency, and power density has led to an increasing demand for electromagnetic interference (EMI) shielding and thermal management materials in the semiconductor industry. This study proposes a fold fabrication strategy to enhance the EMI shielding and thermal conductive properties of commonly used polyolefin components (such as polyethylene) by incorporating premodified MXene nanosheets and a well-aligned, seamless graphene framework into the matrix. The results demonstrate that nanoscale interface engineering can further improve the physical properties of the composites, enabling high-performance polymer composites for use in microelectronics and microsystems.

ACS NANO (2022)

Article Engineering, Environmental

A smart anti-corrosion coating based on triple functional fillers

Meng Zhang et al.

Summary: A novel strategy was developed to construct a triple functional filler for enhancing the anti-corrosion performance of coatings. The designed filler showed intelligent self-healing function and barrier anti-corrosion characteristic, significantly decreasing the corrosion rate and increasing the corrosion inhibition efficiency. This research may provide insights in developing new long-term anti-corrosion coatings and overcoming the limitations of polymer-based coatings to some extent.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Materials Science, Multidisciplinary

Multifunctional superhydrophobic coatings fabricated from basalt scales on a fluorocarbon coating base

Hongpeng Zheng et al.

Summary: This study focuses on developing easy-to-apply superhydrophobic coatings with multifunctional capabilities to extend the integrity and durability of the coatings in harsh marine environments. By using selective chemical etching and fluorination methods, a superhydrophobic surface with the required structure and low surface energy was fabricated on basalt scales for large surface area applications.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Materials Science, Multidisciplinary

Boron nitride-epoxy inverse ?nacre-like? nanocomposite coatings with superior anticorrosion performance

Hongran Zhao et al.

Summary: A novel approach is proposed in this study to prepare self-aligned boron nitride-epoxy composite coatings through electrophoretic deposition technique, improving the impedance modulus of the anticorrosive coatings. The results demonstrate that this method can transform the random distribution of boron nitride nanosheets into ordered dispersion and orientation.

CORROSION SCIENCE (2021)

Article Multidisciplinary Sciences

Stiff and tough PDMS-MMT layered nanocomposites visualized by AIE luminogens

Jingsong Peng et al.

Summary: The study presents the development of PDMS-montmorillonite layered nanocomposites via ice-templating technique, which significantly improves the Young's modulus and toughness compared with pure PDMS. The use of aggregation-induced emission luminogens in confocal fluorescence microscopy allows for three-dimensional reconstruction and crack tracing of the nacre-inspired PDMS-MMT-L nanocomposite, demonstrating mechanisms such as crack deflection and bridging for toughness enhancement. Fine tuning of mechanical properties in elastomers is essential for their application in flexible devices and biomedical fields.

NATURE COMMUNICATIONS (2021)

Article Engineering, Environmental

Active anti-corrosion of epoxy coating by nitrite ions intercalated MgAl LDH

Yue Su et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Article Materials Science, Coatings & Films

Molybdate intercalated hydrotalcite/graphene oxide composite as corrosion inhibitor for carbon steel

Thuy Duong Nguyen et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Article Multidisciplinary Sciences

Tailoring nanocomposite interfaces with graphene to achieve high strength and toughness

Ningning Song et al.

SCIENCE ADVANCES (2020)

Article Materials Science, Multidisciplinary

In-situ intercalation of 8-hydroxyquinoline in Mg-Al LDH coating to improve the corrosion resistance of AZ31

Muhammad Junaid Anjum et al.

CORROSION SCIENCE (2019)

Article Multidisciplinary Sciences

High thermal conductivity of high-quality monolayer boron nitride and its thermal expansion

Qiran Cai et al.

SCIENCE ADVANCES (2019)

Article Chemistry, Physical

How semiconductor transition metal dichalcogenides replaced graphene for enhancing anticorrosion

Jiheng Ding et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Article Nanoscience & Nanotechnology

Enhanced Corrosion Resistance of Superhydrophobic Layered Double Hydroxide Films with Long-Term Stability on Al Substrate

Yanhui Cao et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Materials Science, Composites

Tensile properties, void contents, dispersion and fracture behaviour of 3D printed carbon nanofiber reinforced composites

Easir Arafat Papon et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2018)

Article Multidisciplinary Sciences

Mechanical Properties and the Characterization of Polyacrylonitrile/Carbon Nanotube Composite Nanofiber

Shrouk A. Karim et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2018)

Article Chemistry, Multidisciplinary

Water-Rich Biomimetic Composites with Abiotic Self-Organizing Nanofiber Network

Lizhi Xu et al.

ADVANCED MATERIALS (2018)

Article Chemistry, Multidisciplinary

Controlled Gas Exfoliation of Boron Nitride into Few-Layered Nanosheets

Wenshuai Zhu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Article Materials Science, Multidisciplinary

Isothermal Crystallization Kinetics of Poly (Ethylene 2,5-Furandicarboxylate)

Jesper G. van Berkel et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2015)

Article Chemistry, Multidisciplinary

Strong Oxidation Resistance of Atomically Thin Boron Nitride Nanosheets

Lu Hua Li et al.

ACS NANO (2014)

Article Materials Science, Composites

Experimental study on the mechanical behavior of carbon/epoxy composites with a carbon nanofiber-modified matrix

Yuanxin Zhou et al.

JOURNAL OF COMPOSITE MATERIALS (2014)

Article Polymer Science

High molecular weight poly(ethylene-2,5-furanoate); critical aspects in synthesis and mechanical property determination

Rutger J. I. Knoop et al.

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2013)

Article Materials Science, Composites

Mechanical and thermal characterization of carbon nanofiber reinforced low-density polyethylene composites

Ahmed Khattab et al.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2013)

Article Chemistry, Multidisciplinary

Polydopamine-coated graphene as multifunctional nanofillers in polyurethane

Liping Yang et al.

RSC ADVANCES (2013)

Article Materials Science, Composites

Reinforcing epoxy nanocomposites with functionalized carbon nanotubes via biotin-streptavidin interactions

Rouhollah Dermanaki Farahani et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2012)

Article Polymer Science

A series of furan-aromatic polyesters synthesized via direct esterification method based on renewable resources

Min Jiang et al.

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2012)

Article Polymer Science

Epoxy/Amine-Functionalized Short-Length Vapor-Grown Carbon Nanofiber Composites

Soo-Na Ahn et al.

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2008)

Article Multidisciplinary Sciences

Measurement of the elastic properties and intrinsic strength of monolayer graphene

Changgu Lee et al.

SCIENCE (2008)

Article Polymer Science

Effect of nanoplatelet dispersion on mechanical behavior of polymer nanocomposites

Woong J. Boo et al.

JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2007)

Article Materials Science, Multidisciplinary

Elasticity of hexagonal boron nitride: Inelastic x-ray scattering measurements

A Bosak et al.

PHYSICAL REVIEW B (2006)