4.8 Article

Sodium-Sulfur Batteries with Unprecedented Capacity, Cycling Stability and Operation Temperature Range Enabled by a CoFe2O4 Catalytic Additive Under an External Magnetic Field

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Nanoscience & Nanotechnology

Stable Room-Temperature Sodium-Sulfur Batteries in Ether-Based Electrolytes Enabled by the Fluoroethylene Carbonate Additive

Dezhong Liu et al.

Summary: The room-temperature sodium-sulfur (RT Na-S) battery shows promise for large-scale energy storage systems due to its high energy density and low cost. However, its practical utilization is limited by the short lifespan caused by the shuttle effect from the solid-liquid-solid reaction mechanism of the sulfur cathode. This study proposes using fluoroethylene carbonate as an additive and tetraethylene glycol dimethyl ether as the base solvent to form a stable cycling performance with nearly 100% Coulombic efficiency.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Chemistry, Multidisciplinary

Continuous Carbon Channels Enable Full Na-Ion Accessibility for Superior Room-Temperature Na-S Batteries

Can Wu et al.

Summary: Porous carbon is used as a host to encapsulate highly active sulfur in Li-S and Na-S batteries. The study focuses on designing continuous carbonaceous pores that serve as multifunctional channels to encapsulate sulfur and provide pathways for sodium ions. The carbon-hosted sulfur cathode demonstrates superior cycling performance, high capacity retention, and outstanding rate capability in room-temperature sodium-sulfur batteries.

ADVANCED MATERIALS (2022)

Article Chemistry, Multidisciplinary

P-Doped NiTe2 with Te-Vacancies in Lithium-Sulfur Batteries Prevents Shuttling and Promotes Polysulfide Conversion

Weiqi Yao et al.

Summary: In this study, a P-doped nickel tellurium electrocatalyst was used as a functional layer on the separator of high-performance Li-S batteries, which successfully addressed the shuttle effect and sluggish polysulfide conversion kinetics. The combination of MSC nanosheets and P-doped NiTe2-x electrocatalyst improved the cyclability, rate performance, and areal capacity of the Li-S battery, while reducing the electrolyte/sulfur usage ratio.

ADVANCED MATERIALS (2022)

Article Chemistry, Multidisciplinary

A High Conductivity 1D π-d Conjugated Metal-Organic Framework with Efficient Polysulfide Trapping-Diffusion-Catalysis in Lithium-Sulfur Batteries

Dawei Yang et al.

Summary: In this study, a 1D pi-d conjugated metal-organic framework (MOF), Ni-MOF-1D, is presented as an efficient sulfur host to overcome the shuttling behavior and sluggish conversion kinetics of intermediate lithium polysulfides (LiPS) in lithium-sulfur batteries (LSBs). Ni-MOF-1D exhibits a remarkable binding strength to trap soluble LiPS species and acts as an effective catalyst for S reduction and Li2S oxidation. The delocalization of electrons in the pi-d system of Ni-MOF-1D provides superior electrical conductivity, leading to excellent performance in LSBs.

ADVANCED MATERIALS (2022)

Article Chemistry, Multidisciplinary

A High-Efficiency Mo2C Electrocatalyst Promoting the Polysulfide Redox Kinetics for Na-S Batteries

Xuefeng Zhou et al.

Summary: Hierarchical porous hollow carbon polyhedrons embedded with uniform Mo2C nanoparticles were designed as a host for sulfur, resulting in improved performance of room-temperature sodium-sulfur batteries. The porous carbon material enhanced reactivity and accommodated volume changes, while Mo2C inhibited polysulfide dissolution and catalyzed reaction kinetics.

ADVANCED MATERIALS (2022)

Article Chemistry, Multidisciplinary

Streamline Sulfur Redox Reactions to Achieve Efficient Room-Temperature Sodium-Sulfur Batteries

Yaojie Lei et al.

Summary: It is crucial to regulate S activity dynamically for efficient and stable room-temperature sodium-sulfur (RT/Na-S) batteries. In this study, cobalt sulfide is used as an electron reservoir to enhance the activity of sulfur cathodes, and cobalt single atoms serve as double-end binding sites for stable S conversion. The rational construction of CoS2 electron reservoir enables the direct reduction of S to short-chain sodium polysulfides (Na2S4) through a streamlined redox path. Cobalt single atoms synergistically work with the electron reservoir to reinforce the streamlined redox path, immobilize in situ formed long-chain products, and catalyze their conversion, leading to high S utilization and sustainable cycling stability. The developed sulfur cathodes exhibit superior rate performance and high cycling capacity retention.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Article Engineering, Environmental

Sulfur encapsulation into yolk-shell Fe2N@nitrogen doped carbon for ambient-temperature sodium-sulfur battery cathode

Muhammad Kashif Aslam et al.

Summary: In this study, a novel sulfur carrier YS-Fe2N@NC was synthesized to address the challenges faced by RT-Na-S batteries, demonstrating promising energy storage performance and cycling stability. The introduction of Fe2N to catalyze the conversion reactions of polysulfide within NC shell showed potential for boosting the high storage capacity, rate capability, and stability of the RT-Na-S battery.

CHEMICAL ENGINEERING JOURNAL (2022)

Review Chemistry, Physical

Recent progress of magnetic field application in lithium-based batteries

Kang Shen et al.

Summary: Lithium-based batteries, such as lithium-ion, lithium-sulfur, and lithium-oxygen batteries, have shown promising improvements in electrochemical performance through the application of magnetic fields. However, there are still challenges to be addressed in utilizing magnetic fields for enhancing battery performance.

NANO ENERGY (2022)

Article Chemistry, Multidisciplinary

Tungsten Nanoparticles Accelerate Polysulfides Conversion: A Viable Route toward Stable Room-Temperature Sodium-Sulfur Batteries

Yuping Liu et al.

Summary: This study reports a new sulfur host material based on tungsten nanoparticles embedded in nitrogen-doped graphene. The incorporation of tungsten nanoparticles accelerates polysulfides conversion and suppresses the shuttle effect, leading to a fully reversible reaction and improved electrochemical performance of room-temperature sodium-sulfur batteries.

ADVANCED SCIENCE (2022)

Article Chemistry, Multidisciplinary

Robust Lithium-Sulfur Batteries Enabled by Highly Conductive WSe2-Based Superlattices with Tunable Interlayer Space

Chaoqi Zhang et al.

Summary: This study reports a simple solution-based method to produce organic-inorganic superlattices and demonstrates their tunable interlayer space through the pyrolysis of organic compounds. These superlattices are shown to be excellent sulfur hosts in lithium-sulfur batteries, enabling high sulfur usages, superior rate performance, and outstanding cycling stability.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Chemistry, Multidisciplinary

Alloying Co Species into Ordered and Interconnected Macroporous Carbon Polyhedra for Efficient Oxygen Reduction Reaction in Rechargeable Zinc-Air Batteries

Wei Li et al.

Summary: This study successfully addresses the challenges in engineering non-precious transition metal-based electrocatalysts for achieving optimal intrinsic activity, high density of active sites, and rapid mass transfer ability. The Fe0.5Co@HOMNCP composite catalyst exhibits extraordinary ORR activity and outperforms most Co-based catalysts reported to date. Moreover, it shows superior open-circuit voltage and power density when used as the air electrode in a zinc-air battery compared to a commercial Pt/C + IrO2 catalyst.

ADVANCED MATERIALS (2022)

Review Chemistry, Multidisciplinary

Electrochemistry in Magnetic Fields

Songzhu Luo et al.

Summary: Developing new strategies in magnetoelectrochemistry is crucial to control and understand electrochemical reactions. It combines concepts from multiple disciplines and explores the effects of magnetic fields on fundamental electrochemical principles.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Article Engineering, Environmental

V2O3-decorated carbon nanofibers as a robust interlayer for long-lived, high-performance, room-temperature sodium-sulfur batteries

Rakesh Saroha et al.

Summary: A new interlayer material has been developed to improve the performance of room temperature sodium-sulfur batteries. This material inhibits the shuttling of sodium polysulfides, improves active material utilization, and accelerates reaction kinetics. Compared to conventional batteries, it exhibits higher rate performance and capacity retention.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Materials Science, Multidisciplinary

Inhibited shuttle effect by functional separator for room-temperature sodium-sulfur batteries

Chunwei Dong et al.

Summary: According to statistics, approximately 6 trillion cigarettes are smoked each year worldwide, resulting in around 1.2 million tons of discarded cigarette butts. This study utilizes nitrogen and sulfur co-doped carbon nanofiber/carbon black (N,S-CNF/CB) composite derived from the discarded cigarette filters to modify glass fiber (GF) separator for the first time, aiming to transform waste into wealth and reduce environmental pollution. The experiment demonstrates that a RT-Na/S battery with a N,S-CNF/CB+GF separator exhibits excellent cycling stability and rate performance.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Article Chemistry, Physical

Defect Engineering in a Multiple Confined Geometry for Robust Lithium-Sulfur Batteries

Kunyang Zou et al.

Summary: A multiple confined cathode structure is discovered that provides physical restriction and chemical immobilization of intermediate polysulfides, resulting in uniform current and stable lithium infiltration in Li-S batteries.

ADVANCED ENERGY MATERIALS (2022)

Article Chemistry, Multidisciplinary

Phase Engineering of Defective Copper Selenide toward Robust Lithium-Sulfur Batteries

Dawei Yang et al.

Summary: This study proposes a method of adding copper selenide nanoparticles to the cathode of lithium-sulfur batteries to trap soluble lithium polysulfides and accelerate the reaction kinetics. By adjusting the crystal phase and defect density of the copper selenide, the electronic structure, affinity toward lithium polysulfides, and electrical conductivity can be controlled, resulting in improved battery performance.

ACS NANO (2022)

Review Materials Science, Multidisciplinary

Review and prospects for room-temperature sodium-sulfur batteries

Peng Chen et al.

Summary: This review focuses on recent research results of room-temperature sodium-sulfur (RT-Na/S) batteries, specifically discussing advancements in cathode material improvement, electrolyte optimization, separator modification, and anode protection. Possible solutions and innovations are proposed in hopes of inspiring new ideas for RT-Na/S battery research.

MATERIALS RESEARCH LETTERS (2022)

Article Chemistry, Multidisciplinary

Spin Effect to Promote Reaction Kinetics and Overall Performance of Lithium-Sulfur Batteries under External Magnetic Field

Chao Yue Zhang et al.

Summary: The study demonstrates that using an external magnetic field in lithium-sulfur batteries can significantly improve the LiPS adsorption ability and Li-S reaction kinetics. The electron spin polarization of Co ions reduces electron repulsion and enhances orbital hybridization, resulting in LSBs with unprecedented performance and stability.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Article Engineering, Environmental

Covalent encapsulation of sulfur in a graphene/N-doped carbon host for enhanced sodium-sulfur batteries

Peng Hu et al.

Summary: In this study, a novel nitrogen-doped graphene/sulfur cathode material was developed. Sulfur was homogeneously incorporated into the graphene-based host through a vapor-infiltration method, and a polydopamine-derived nitrogen-doped carbon layer was coated to improve the sulfur content. The obtained cathode material showed excellent cycle stability in room temperature sodium-sulfur battery.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Energy & Fuels

Peak-shaving balance of regional power grid based on sensitivity analysis of inter-provincial mutual aid

Fan Li et al.

Summary: The pressure on balancing peak-shaving in the power grid and the consumption of renewable energy is increasing year by year. Utilizing inter-provincial mutual aid can optimize the overall peak-shaving capacity of the regional power grid, minimizing the waste of renewable energy.

ENERGY REPORTS (2022)

Article Chemistry, Physical

A highly-efficient electrocatalyst for room temperature sodium-sulfur batteries: assembled nitrogen-doped hollow porous carbon spheres decorated with ultrafine α-MoC1-x nanoparticles

Jirong Mou et al.

Summary: This study introduces a honeycomb-like sulfur electrocatalyst for room-temperature sodium-sulfur batteries, which shows excellent rate performances and outstanding cyclability. The catalytic conversion of sodium polysulfides in the battery is promoted by the polar alpha-MoC1-x nanoparticles uniformly distributed on nitrogen-doped hollow porous carbon spheres. The results suggest that this method can effectively improve the performance of next-generation energy storage systems.

ENERGY STORAGE MATERIALS (2022)

Article Electrochemistry

Surface strain-enhanced MoS2 as a high-performance cathode catalyst for lithium-sulfur batteries

Chao Yue Zhang et al.

Summary: This study proposes the use of strained MoS2 as a catalytically active sulfur host to improve the performance of lithium-sulfur batteries. The introduction of strain enhances the catalyst's ability to adsorb lithium polysulfides, accelerating its catalytic conversion and promoting lithium-ion transferability. The results show that strain engineering can significantly improve the capacity and cycling stability of the electrodes. This work not only provides a new strategy for the development of lithium-sulfur batteries, but also suggests the potential application of strain engineering in other energy storage and conversion fields.

ESCIENCE (2022)

Article Chemistry, Inorganic & Nuclear

Tessellated N-doped carbon/CoSe2 as trap-catalyst sulfur hosts for room-temperature sodium-sulfur batteries

Hao Wang et al.

Summary: A self-supported tessellated N-doped carbon/CoSe2 (NCCS) is developed as a sulfur host for sodium-sulfur batteries, which exhibits excellent conductivity and adsorption-catalytic properties. The CoSe2 nanoparticles can anchor, trap, and catalyze polysulfides, leading to high initial discharge specific capacity and good electrochemical stability of the prepared NCCS@S cathode.

INORGANIC CHEMISTRY FRONTIERS (2022)

Article Chemistry, Multidisciplinary

Porous Heteroatom-Doped Ti3C2Tx MXene Microspheres Enable Strong Adsorption of Sodium Polysulfides for Long-Life Room-Temperature Sodium-Sulfur Batteries

Weizhai Bao et al.

Summary: The study presents a design strategy using Ti3C2Tx MXene for encapsulation of sodium polysulfides to enhance the performance of sodium-sulfur batteries, demonstrating outstanding electrochemical performances with high reversible capacity and extended cycling stability.

ACS NANO (2021)

Article Engineering, Environmental

Enhanced reversible capacity of sulfurized polyacrylonitrile cathode for room-temperature Na/S batteries by electrochemical activation

Huihun Kim et al.

Summary: The research identified the reaction mechanism of sulfurized polyacrylonitrile (SPAN) cathode and achieved high reversible capacity through electrochemical activation, providing new strategies for the development of room-temperature Na/S batteries.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Nanoscience & Nanotechnology

Efficient Catalytic Conversion of Polysulfides by Biomimetic Design of Branch-Leaf Electrode for High-Energy Sodium-Sulfur Batteries

Wenyan Du et al.

Summary: A 3D branch-leaf biomimetic design is proposed for high-performance Na-S batteries, utilizing conductive branches and catalytic leaves to effectively address limitations caused by polysulfides, providing electron and ion pathways for high specific capacity and superior rate performance.

NANO-MICRO LETTERS (2021)

Article Chemistry, Multidisciplinary

Enabling a Stable Room-Temperature Sodium-Sulfur Battery Cathode by Building Heterostructures in Multichannel Carbon Fibers

Xin Ye et al.

Summary: This study presents a highly stable room-temperature sodium-sulfur battery cathode material constructed with heterostructures in carbon fibers. The cathode exhibits high capacity and high Coulombic efficiency at low rates, and maintains good cyclic stability even at high rates.

ACS NANO (2021)

Article Chemistry, Multidisciplinary

Sulfur in Amorphous Silica for an Advanced Room-Temperature Sodium-Sulfur Battery

Jiahui Zhou et al.

Summary: In this study, a long-life room-temperature Na/S battery with amorphous porous silica as a sulfur host is reported, showing superior capacity and excellent cyclability. The complex pores act as micro-containers and the formation of Na-O chemical bonds between amorphous silica and sodium polysulfide enable the electrodes to inhibit sodium polysulfide shuttle effectively, thereby avoiding the loss of active sulfur and achieving high reversible capacity after multiple cycles.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Review Chemistry, Physical

Room-Temperature Sodium-Sulfur Batteries and Beyond: Realizing Practical High Energy Systems through Anode, Cathode, and Electrolyte Engineering

Alex Yong Sheng Eng et al.

Summary: Sodium-sulfur batteries offer a promising solution for energy storage systems with rigorous requirements, such as cost-effectiveness and high storage capacities. Key challenges include improving the anode-electrolyte interface engineering and focusing on core principles guiding use-inspired design of cathode architectures, from elemental sulfur and polysulfide cathodes to emerging host structures.

ADVANCED ENERGY MATERIALS (2021)

Article Multidisciplinary Sciences

A Mo5N6 electrocatalyst for efficient Na2S electrodeposition in room-temperature sodium-sulfur batteries

Chao Ye et al.

Summary: The Mo5N6 cathode material enables efficient Na2S electrodeposition, improving cycling performance in room-temperature sodium-sulfur batteries.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Multidisciplinary

Engineering High-Spin State Cobalt Cations in Spinel Zinc Cobalt Oxide for Spin Channel Propagation and Active Site Enhancement in Water Oxidation

Yuanmiao Sun et al.

Summary: Through density functional theory calculations, it was found that the OER activity of spinel zinc cobalt oxide is hindered by the presence of low-spin state cobalt cations, but increasing the spin state of cobalt cations can promote spin-selected charge transport and enhance active sites for intermediate adsorption. By controlling the calcination temperature to achieve high-spin state cobalt cations in ZnCo2O4, the catalytic activity was successfully optimized.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Electrochemistry

Crystal Alignment Technology of Electrode Material for Enhancing Electrochemical Performance in Lithium Ion Battery

Cham Kim et al.

Summary: The crystal alignment technology based on magnetic properties of lithium nickel manganese oxide (LiNi0.5Mn0.3Co0.2O2) results in an electrode with superior electrochemical performance in lithium ion batteries, due to improved lithium ion transport capability along the (00 l) plane.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Article Chemistry, Physical

Deciphering the catalysis essence of vanadium self-intercalated two-dimensional vanadium sulfides (V5S8) on lithium polysulfide towards high-rate and ultra-stable Li-S batteries

Chao Yue Zhang et al.

Summary: The study focuses on atom-intercalated transition metal disulfides, particularly V-0.25-intercalated VS2 (V5S8), as a promising promoter for lithium-sulfur batteries. The V5S8 nanoflakes display enhanced catalytic properties and improved stability, leading to high specific capacity and low decay rate under various cycling conditions. Furthermore, the V5S8 enables high areal capacity and dynamic flexibility in LSBs, indicating its potential for practical applications.

ENERGY STORAGE MATERIALS (2021)

Article Multidisciplinary Sciences

Spin-polarized oxygen evolution reaction under magnetic field

Xiao Ren et al.

Summary: The authors demonstrate the use of a ferromagnetic catalyst to facilitate spin polarization in the water oxidation reaction, revealing a ferromagnetic-exchange-like behavior between the catalyst and the adsorbed oxygen species. By utilizing ferromagnetic catalysts as spin polarizers under a constant magnetic field, the OER can be enhanced through coherent spin exchange at the first electron transfer step. This study provides insights into spin-polarized kinetics of the oxygen evolution reaction, offering references for the understanding and design of spin-dependent catalysts.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Physical

Ferromagnetic 1D-Fe3O4@C Microrods Boost Polysulfide Anchoring for Lithium-Sulfur Batteries

Yingchong Huang et al.

Summary: By using a ferromagnetic one-dimensional porous Fe3O4@C electrode as a sulfur host, the issues of low sulfur utilization and shuttle effect in Li-S batteries have been successfully addressed, achieving high specific capacity and cycling performance.

ACS APPLIED ENERGY MATERIALS (2021)

Article Electrochemistry

Magnetic Control of Electrolyte Trapping Polysulfide for Enhanced Lithium-Sulfur Batteries

Yongan Cao et al.

Summary: The study introduces the magnetorheological effect into lithium sulfur batteries for the first time, aiming to improve battery performance by designing a magnetic control electrolyte. The introduction of carbonyl iron powders helps mitigate the shuttle effect and enhance the specific capacity of the battery.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Article Chemistry, Multidisciplinary

Tunable Nitrogen-Doping of Sulfur Host Nanostructures for Stable and Shuttle-Free Room-Temperature Sodium-Sulfur Batteries

Alex Yong Sheng Eng et al.

Summary: This study investigates the impact of nitrogen-doping on the performance of sodium-sulfur batteries, finding that highly doped nitrogen-doped nanocarbon host, despite its lower conductivity, exhibits better Coulombic efficiency and stability, retaining a high capacity after 800 cycles. This suggests that nitrogen-doping should be prioritized in designing shuttle-free, long-life sodium-sulfur batteries.

NANO LETTERS (2021)

Article Multidisciplinary Sciences

Amorphization-induced surface electronic states modulation of cobaltous oxide nanosheets for lithium-sulfur batteries

Ruilong Li et al.

Summary: Amorphization-induced surface electronic states modulation significantly improves the polysulfides adsorption capability of cobaltous oxide, leading to enhanced performance and cycling stability of lithium-sulfur batteries. Compared to crystalline materials, amorphous cobaltous oxide nanosheets demonstrate superior adsorption of polysulfides, making them a promising candidate for cathode additives in Li-S batteries.

NATURE COMMUNICATIONS (2021)

Article Multidisciplinary Sciences

Spin pinning effect to reconstructed oxyhydroxide layer on ferromagnetic oxides for enhanced water oxidation

Tianze Wu et al.

Summary: This study introduces a strategy of spin pinning to increase the spin alignment in paramagnetic oxyhydroxides, aiming to enhance the OER activity, and confirms the spin effect in the rate-limiting OER step.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Physical

Electric Fields in Catalysis: From Enzymes to Molecular Catalysts

Nadia G. Leonard et al.

Summary: Electric fields play a crucial role in modifying the free energy landscape and impacting reactivity, yet they are rarely considered in synthetic design. This Perspective discusses the commonalities of electric field effects across different platforms and identifies practical challenges in applying them to mediate reactivity in synthetic molecular systems.

ACS CATALYSIS (2021)

Article Chemistry, Physical

Generating Short-Chain Sulfur Suitable for Efficient Sodium-Sulfur Batteries via Atomic Copper Sites on a N,O-Codoped Carbon Composite

Fengping Xiao et al.

Summary: A stable sulfur host with single-atom copper catalysts derived from a bimetallic Cu-Zn metal-organic framework is reported, which significantly improves the performance of sulfur-loaded carbon framework used as a cathode in sodium-sulfur batteries, exhibiting superior capacity and rate performance.

ADVANCED ENERGY MATERIALS (2021)

Review Multidisciplinary Sciences

Magnetically active lithium-ion batteries towards battery performance improvement

Carlos M. Costa et al.

Summary: This review discusses the role of magnetic forces in electrochemical reactions and how these forces can be utilized to improve the performance of lithium-ion batteries (LIBs). It emphasizes the interactions between magnetic forces and LIBs components, and provides insights into controlling these forces and interactions to achieve higher performance LIBs structures and the development of innovative concepts.

ISCIENCE (2021)

Article Chemistry, Multidisciplinary

Local spin-state tuning of cobalt-iron selenide nanoframes for the boosted oxygen evolution

Jun-Ye Zhang et al.

Summary: The study introduces cobalt-iron selenide nanoframes as a highly efficient electrocatalyst for water oxidation, achieving a low overpotential and outperforming most cobalt-based catalysts and even benchmarked commercial ruthenium oxides. Iron doping regulates the local spin state of cobalt species, accelerating charge transfer and formation of oxygenated intermediates, ultimately leading to enhanced oxygen evolution efficiency. This work may pioneer a promising approach in energy conversion technologies by tuning the local electronic structure to improve electrocatalysis activities.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Multidisciplinary

Remedies for Polysulfide Dissolution in Room-Temperature Sodium-Sulfur Batteries

Yun-Xiao Wang et al.

ADVANCED MATERIALS (2020)

Article Chemistry, Multidisciplinary

Electron-State Confinement of Polysulfides for Highly Stable Sodium-Sulfur Batteries

Chao Ye et al.

ADVANCED MATERIALS (2020)

Article Engineering, Environmental

Cooperative chemisorption of polysulfides via 2D hexagonal WS2-rimmed Co9S8 heterostructures for lithium-sulfur batteries

Chao Yue Zhang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Chemistry, Multidisciplinary

Spin-Related Electron Transfer and Orbital Interactions in Oxygen Electrocatalysis

Yuanmiao Sun et al.

ADVANCED MATERIALS (2020)

Article Chemistry, Physical

In-situ growth of graphene on carbon nanofiber from lignin

Xiaohan Wang et al.

CARBON (2020)

Article Chemistry, Multidisciplinary

Lewis Acid-Base Interactions between Polysulfides and Boehmite Enables Stable Room-Temperature Sodium-Sulfur Batteries

Arnab Ghosh et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Multidisciplinary Sciences

Potential for large-scale CO2 removal via enhanced rock weathering with croplands

David J. Beerling et al.

NATURE (2020)

Review Chemistry, Physical

Recent advances in electrolytes for room-temperature sodium-sulfur batteries: A review

Mohanjeet Singh Syali et al.

ENERGY STORAGE MATERIALS (2020)

Article Chemistry, Physical

Annealing temperature effects on the cation distribution in CoFe2O4 nanofibers

Nannan Liu et al.

APPLIED SURFACE SCIENCE (2020)

Review Chemistry, Physical

Recent Advances in Magnetic Field-Enhanced Electrocatalysis

Yuanyuan Zhang et al.

ACS APPLIED ENERGY MATERIALS (2020)

Review Chemistry, Multidisciplinary

Revitalising sodium-sulfur batteries for non-high-temperature operation: a crucial review

Yizhou Wang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Article Chemistry, Physical

Ultrastable lithium-sulfur batteries with outstanding rate capability boosted by NiAs-type vanadium sulfides

Chao Yue Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Article Chemistry, Multidisciplinary

High-performance room-temperature sodium-sulfur battery enabled by electrocatalytic sodium polysulfides full conversion

Nana Wang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Article Chemistry, Multidisciplinary

Strong Surface Bonding of Polysulfides by Teflonized Carbon Matrix for Enhanced Performance in Room Temperature Sodium-Sulfur Battery

Ajay Piriya Vijaya Kumar Saroja et al.

ADVANCED MATERIALS INTERFACES (2019)

Article Chemistry, Physical

Magnetic Field-Suppressed Lithium Dendrite Growth for Stable Lithium-Metal Batteries

Kang Shen et al.

ADVANCED ENERGY MATERIALS (2019)

Article Energy & Fuels

Direct magnetic enhancement of electrocatalytic water oxidation in alkaline media

Felipe A. Garces-Pineda et al.

NATURE ENERGY (2019)

Article Chemistry, Multidisciplinary

Long-Life Room-Temperature Sodium-Sulfur Batteries by Virtue of Transition-Metal-Nanocluster-Sulfur Interactions

Bin-Wei Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Article Chemistry, Multidisciplinary

Ferromagnetic Nanoparticle-Assisted Polysulfide Trapping for Enhanced Lithium-Sulfur Batteries

Zan Gao et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Article Chemistry, Multidisciplinary

Nickel-Iron Layered Double Hydroxide Hollow Polyhedrons as a Superior Sulfur Host for Lithium-Sulfur Batteries

Jintao Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Article Chemistry, Multidisciplinary

A Size Threshold for Enhanced Magnetoresistance in Colloidally Prepared CoFe2O4 Nanoparticle Solids

Benjamin H. Zhou et al.

ACS CENTRAL SCIENCE (2018)

Article Multidisciplinary Sciences

Alleviating oxygen evolution from Li-excess oxide materials through theory-guided surface protection

Yongwoo Shin et al.

NATURE COMMUNICATIONS (2018)

Article Chemistry, Physical

Spin state engineered ZnxCo3-xO4 as an efficient oxygen evolution electrocatalyst

Rani Mohan Ramsundar et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2018)

Article Multidisciplinary Sciences

A stable room-temperature sodium-sulfur battery

Shuya Wei et al.

NATURE COMMUNICATIONS (2016)

Article Chemistry, Physical

Electronic structure studies of the spinel CoFe2O4 by X-ray photoelectron spectroscopy

Zhongpo Zhou et al.

APPLIED SURFACE SCIENCE (2008)