☆ 4.6 Article

Bending Performance and Crashworthiness Characteristics of Sandwich Beams with New Auxetic Core

ADVANCED ENGINEERING MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Mechanics

A novel metamaterial with individually adjustable and sign-switchable Poisson?s ratio

Weitao Lv et al.

Summary: In recent studies, structures with alternating positive and negative Poisson's ratio have been proposed, offering a new direction for structural design. This paper introduces a structure that can have different Poisson's ratio signs under tension and compression, and allows separate adjustment of the Poisson's ratio under tension or compression. Through FEM simulation and experiments, the Poisson's ratio of this proposed structure under tension and compression is studied. The results demonstrate that the Poisson's ratio under tension and compression has opposite signs, and the value of the Poisson's ratio under tension or compression can be individually altered by adjusting geometric parameters. The proposed structure's unique deformation behavior is independent of material properties. 2D and 3D cellular structures composed of 2D unit cell arrays retain these distinctive characteristics. The self-contact effect utilized in the proposed structure offers a fresh perspective on adjustable Poisson's ratio and structural design.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2023)

添加到收藏夹

Article Materials Science, Composites

Study of three-point bending behaviors of composite sandwich structure with re-entrant honeycomb cores

Zhikang Liu et al.

Summary: This article investigates the bending behaviors of composite re-entrant honeycomb structures under three-point bending load. The influence of wall thickness gradient design on bending failure modes and the effect of relative density on bending failure load were analyzed.

POLYMER COMPOSITES (2023)

添加到收藏夹

Article Engineering, Civil

Quasi-static and blast resistance performance of octet-truss-filled double tubes

Weitao Lv et al.

Summary: A new octet-truss-filled double tubes structure was proposed, and its mechanical behavior and blast resistance performance were analyzed. The specific energy absorption of the structure was higher than other filled tube structures, and the displacement of the back plate was smaller, indicating better performance. The effects of explosion load, plate thickness, and octet-truss side length on the blast resistance performance were also discussed.

ENGINEERING STRUCTURES (2023)

添加到收藏夹

Article Engineering, Mechanical

Elastohydrodynamic behavior analysis on water-lubricated journal bearing: a study of acoustic and tribological performance based on CFD-FSI approach

Mohammad Tauviqirrahman et al.

Summary: This study investigates the tribological and acoustic behavior of water-lubricated journal bearing using a comprehensive simulation method. The results show that bearing deformation has a significant impact on tribological characteristics, while bearing noise is weakly sensitive to bearing material. Additionally, the study discusses the effect of operating conditions on acoustic and tribological performance.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2022)

添加到收藏夹

Article Mechanics

Bio-inspired repeatable lattice structures for energy absorption: Experimental and finite element study

Deepak Sharma et al.

Summary: New and innovative lightweight materials are in high demand in the automotive and aerospace industry. Bio-inspired structures have shown significant progress over traditional lightweight structures. By studying the energy absorption behavior and deformation characteristics of sea sponge lattice structures, it is possible to design structures with improved energy absorption capacity and stability.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Mechanics

Optimal design of a novel graded auxetic honeycomb core for sandwich beams under bending using digital image correlation (DIC)

Mohammad Hossein Zamani et al.

Summary: This paper presents a novel graded design for an auxetic honeycomb sandwich structure, and the mechanical properties are improved through experiments and numerical analysis.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Influences of skin thickness, core topology, depth and direction on flexural deformation and ductile failure of Al honeycomb-based sandwich structures

Wenting Li et al.

COMPOSITES PART B-ENGINEERING (2022)

添加到收藏夹

Article Engineering, Mechanical

Flexural properties of functionally graded additively manufactured AlSi10Mg TPMS latticed-beams

Chukwugozie J. Ejeh et al.

Summary: This study investigates the enhancement of flexural properties of lightweight beams through lattice functional grading and hybridization. Experimental results show that functional grading and hybridization significantly improve the specific flexural modulus of sheet-based TPMS latticed-beams, aiding in deflecting crack growth and slowing down final failure.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

添加到收藏夹

Article Engineering, Civil

Longitudinal bending of corrugated sandwich panels with cores of various shapes

Fukun Xia et al.

Summary: The mechanical response of aluminium corrugated sandwich panels with different core shapes under longitudinal three-point bending is studied in this paper. Experimental and numerical methods are used, and the results are in good agreement. Parametric studies are conducted to investigate the effects of core parameters, and two deformation modes are observed. Finally, a multiobjective Bayesian optimization method is applied to optimize the geometry of trapezoidal corrugated sandwich panels to enhance specific energy absorption and reduce intrusion depth.

THIN-WALLED STRUCTURES (2022)

添加到收藏夹

Article Engineering, Aerospace

In-plane and out-plane flexural properties of the bird feather-inspired panels: Experimental, digital image correlation, and finite element study

Deepak Sharma et al.

Summary: The flexural performance of novel bird's feather-inspired cellular panels has been studied, focusing on the effect of unit cell length and orientation on stiffness, strength, energy absorption, and crack propagation. Experimental and finite element modeling results demonstrate the improved flexural properties of the new bionic panels.

AEROSPACE SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Mechanics

Optimal face sheet thickness of 3D printed polymeric hexagonal and re-entrant honeycomb sandwich beams subjected to three-point bending

H. Geramizadeh et al.

Summary: This study reveals the method of designing optimized 3D printed polymeric sandwich beams by utilizing failure mechanisms and establishes the relationship between optimal face sheet thickness and energy absorption capacity through experimental and numerical analysis.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Engineering, Chemical

Experimental investigation on mechanical properties of additively manufactured anti-tetrachiral cellular auxetic structures under shear and flexural loading

Soham Teraiya et al.

Summary: This paper presents an experimental study on the mechanical properties of additively manufactured anti-tetrachiral auxetic structures under shear and flexural loading. The influence of process factors on modulus, strength, and specific energy absorption (SEA) is investigated, and regression models are developed to predict the response characteristics. The study shows that the mechanical properties of the structures improve with increasing slice thickness, print speed, and contour width, and optimized values of process factors are determined to maximize the mechanical properties.

POLYMER ENGINEERING AND SCIENCE (2022)

添加到收藏夹

Article Engineering, Civil

Quasi-static compression performance of material extrusion enabled re-entrant diamond auxetic metamaterial: Fabrication, tuning the geometrical parameters and fibre reinforcements

Niranjan Chikkanna et al.

Summary: This study investigates the manufacturing and performance optimization of auxetic diamond materials using FFF. The deformation parameters and printing parameters are carefully selected to avoid premature failure. The addition of carbon and glass fiber reinforcements enhances the strength and stiffness of the structure but reduces its energy absorption characteristics.

THIN-WALLED STRUCTURES (2022)

添加到收藏夹

Article Engineering, Civil

Three-point bending performance of sandwich panels with various types of cores

Fukun Xia et al.

Summary: The bending performances of various types of sandwich panels were studied and compared experimentally and numerically in this paper. Three distinct modes of deformation were identified through parametric studies. The analysis results showed that the honeycomb core had the highest specific energy absorption.

THIN-WALLED STRUCTURES (2022)

添加到收藏夹

Article Engineering, Mechanical

Large deformation of corrugated sandwich panels under three-point bending

Fukun Xia et al.

Summary: Corrugated sandwich panels are widely used in engineering applications due to their excellent energy absorption and lightweight properties. This research investigates the mechanical response of aluminum corrugated sandwich panels under three-point bending through experimental, numerical, and theoretical methods. Parametric studies using ABAQUS/explicit show that geometric configurations have significant effects on the deformation mode, peak force, and energy absorption of the panels.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2021)

添加到收藏夹

Article Engineering, Civil

Bending response and energy absorption of sandwich beams with novel auxetic honeycomb core

Xuan Zhao et al.

Summary: The study focuses on the bending response and energy absorption of the star-triangular honeycomb core (STH-C) and sandwich beam with an STH-C (STH-SW), showing that structural parameters significantly influence the load-bearing capacity of the sandwich beams, especially the thickness-to-length ratio t/l.

ENGINEERING STRUCTURES (2021)

添加到收藏夹

Article Engineering, Mechanical

Study on blast resistance of a composite sandwich panel with isotropic foam core with negative Poisson's ratio

Weitao Lv et al.

Summary: This paper established a sandwich panel with a 3D isotropic foam core with negative Poisson's ratio using FEM, and found that the sandwich panel with the minimum Poisson's ratio core exhibited the highest blast resistance performance.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Engineering, Civil

Triangular corrugated sandwich panels under longitudinal bending

Fukun Xia et al.

Summary: This paper investigates the mechanical response of aluminum corrugated sandwich panels subjected to longitudinal loading, examining the effects of geometric configurations on deformation mode, peak force, and specific energy absorption. It is found that thicker core webs result in greater energy absorption, and that the energy dissipated by sandwich panels can be tailored by varying the geometry of the core. Based on experimental and simulation observations, a theoretical analysis using energy method is used to predict the crushing force of panels during large deformation.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Article Engineering, Manufacturing

Experimental and analytical investigation of the bending behaviour of 3D-printed bio-based sandwich structures composites with auxetic core under cyclic fatigue tests

Khawla Essassi et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

添加到收藏夹

Article Polymer Science

Bending Behavior of Lightweight Wood-Based Sandwich Beams with Auxetic Cellular Core

Krzysztof Pelinski et al.

POLYMERS (2020)

添加到收藏夹

Article Mechanics

Quasi-static and dynamic compression behaviors of a novel auxetic structure

Krishna Prasath Logakannan et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Engineering, Biomedical

A new design of 3D-printed orthopedic bone plates with auxetic structures to mitigate stress shielding and improve intra-operative bending

Sanjairaj Vijayavenkataraman et al.

BIO-DESIGN AND MANUFACTURING (2020)

添加到收藏夹

Article Engineering, Civil

Parametric study of the cross-section shape of aluminium tubes in dynamic three-point bending

David Bilston et al.

THIN-WALLED STRUCTURES (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental and numerical analysis of wooden sandwich panels with an auxetic core and oval cells

Jerzy Smardzewski

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Strong re-entrant cellular structures with negative Poisson's ratio

Dong Li et al.

JOURNAL OF MATERIALS SCIENCE (2018)

添加到收藏夹

Article Mechanics

3D printed architected polymeric sandwich panels: Energy absorption and structural performance

H. Yazdani Sarvestani et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Engineering, Mechanical

Analysis and parametric optimization of a novel sandwich panel with double-V auxetic structure core under air blast loading

Yuanlong Wang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

添加到收藏夹

Article Polymer Science

Digital image processing and thermo-mechanical response of neat epoxy and different laminate orientations of fiber reinforced polymer composites for vibration isolation applications

K. Naresh et al.

INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2018)

添加到收藏夹

Review Computer Science, Interdisciplinary Applications

On design optimization for structural crashworthiness and its state of the art

Jianguang Fang et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental and numerical study on honeycomb sandwich panels under bending and in-panel compression

Guangyong Sun et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Article Mechanics

Impact and close-in blast response of auxetic honeycomb-cored sandwich panels: Experimental tests and numerical simulations

Chang Qi et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Mechanics

Bending behavior of sandwich composite structures with tunable 3D-printed core materials

Tiantian Li et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Review Engineering, Aerospace

Additive manufacturing in unmanned aerial vehicles (UAVs): Challenges and potential

G. D. Goh et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2017)

添加到收藏夹

Article Mechanics

Experimental study on crashworthiness of empty/aluminum foam/honeycomb-filled CFRP tubes

Guangyong Sun et al.

COMPOSITE STRUCTURES (2016)

添加到收藏夹

Article Engineering, Aerospace

Sandwich Structured Composites for Aeronautics: Methods of Manufacturing Affecting Some Mechanical Properties

Aneta Krzyhak et al.

INTERNATIONAL JOURNAL OF AEROSPACE ENGINEERING (2016)

添加到收藏夹

Article Mechanics

Composite chiral shear vibration damper

Fabio Agnese et al.

COMPOSITE STRUCTURES (2015)

添加到收藏夹

Article Mathematics, Applied

Crashworthiness analysis and design of multi-cell hexagonal columns under multiple loading cases

Na Qiu et al.

FINITE ELEMENTS IN ANALYSIS AND DESIGN (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Three-point bending of sandwich beams with aluminum foam-filled corrugated cores

L. L. Yan et al.

MATERIALS & DESIGN (2014)

添加到收藏夹

Article Engineering, Manufacturing

The bending and failure of sandwich structures with auxetic gradient cellular cores

Y. Hou et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Numerical investigation of a three point bending test on sandwich panels with aluminum skins and Nomex™ honeycomb core

M. Giglio et al.

COMPUTATIONAL MATERIALS SCIENCE (2012)

添加到收藏夹

Article Engineering, Mechanical

Collapse modes in aluminium honeycomb sandwich panels under bending and impact loading

V. Crupi et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Static aeroelastic response of chiral-core airfoils

A. Spadoni et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2007)

添加到收藏夹

Review Mechanics

Review of advanced composite structures for naval ships and submarines

AP Mouritz et al.

COMPOSITE STRUCTURES (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.