☆ 4.6 Article

Microstructural Transformation and Enhanced Strength of Wire-Feed Electron-Beam Additive Manufactured Ti-6Al-4V Alloy Induced by High-Pressure Torsion

ADVANCED ENGINEERING MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Microstructural Features and Microhardness of the Ti-6Al-4V Alloy Synthesized by Additive Plasma Wire Deposition Welding

Irina P. Semenova et al.

Summary: A new method using an ultrafine-grained wire is proposed to enhance the strength properties of Ti-6Al-4V alloy synthesized by wire deposition welding. The microhardness of the alloy produced using the ultrafine-grained wire was found to be 20% higher than that produced using a conventional wire.

MATERIALS (2023)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

The Microstructural and Phase Evolution of the 3D Printed Ti-6Al-4V Alloy during Mechanical Loading

A. V. Panin et al.

Summary: This study presents the evolution of microstructure and phase composition of 3D-printed Ti-6Al-4V samples under tension in the transmission electron microscope column. The microstructure consists of columnar primary beta-grains with alpha/alpha'-Ti laths separated by layers of residual beta-phase. The concentration nonuniformity of alloying elements and deformation-induced alpha'->alpha transformations can occur in vanadium-enriched regions.

PHYSICS OF METALS AND METALLOGRAPHY (2023)

添加到收藏夹

Article Nanoscience & Nanotechnology

The effect of ultrasonic impact treatment on deformation and fracture of electron beam additive manufactured Ti-6Al-4V under uniaxial tension

Alexey Panin et al.

Summary: The results of experimental investigations and molecular dynamics simulation of deformation and fracture of as built wire-feed EBAM Ti-6Al-4V samples and the samples subjected to ultrasonic impact treatment are presented. Dislocation deformation and microstructure changes are observed in the samples under different conditions, and the main deformation mechanisms are identified using molecular dynamics simulation.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Friction Stir Processing of Additively Manufactured Ti-6Al-4V Alloy: Structure Modification and Mechanical Properties

Kirill Kalashnikov et al.

Summary: This study explores the possibility of using friction stir processing to improve the Ti-6Al-4V titanium alloy material produced by wire-feed electron beam additive manufacturing. The results show that the material's structure and properties are sensitive to changes in the tool loading force, while the processing direction has little effect. Increasing the axial load affects the material's structure and strength. Friction stir processing can significantly increase the ultimate tensile strength of the material.

METALS (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Nanomaterials by severe plastic deformation: review of historical developments and recent advances

Kaveh Edalati et al.

Summary: This article comprehensively reviews recent advances in the development of ultrafine-grained and nanostructured materials through severe plastic deformation and provides a brief history of this field. Severe plastic deformation methods have been effective in producing materials with advanced mechanical and functional properties, and the field of NanoSPD has experienced significant progress in the past two decades.

MATERIALS RESEARCH LETTERS (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Using Severe Plastic Deformation to Produce Nanostructured Materials with Superior Properties

Ruslan Z. Valiev et al.

Summary: The past decade has seen significant advances in severe plastic deformation techniques, leading to the development of new and superior properties in various materials. The concept of nanostructural design for metals and alloys has been proposed to enhance material performance and applications.

ANNUAL REVIEW OF MATERIALS RESEARCH (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Texture evolution in high-pressure torsion processing

Hiba Azzeddine et al.

Summary: This study focuses on the influence of various factors such as imposed strain, deformation temperature, and alloying elements on the crystallographic texture evolution in FCC, BCC, and HCP crystal structure materials processed exclusively by HPT.

PROGRESS IN MATERIALS SCIENCE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Transformations of the Microstructure and Phase Compositions of Titanium Alloys during Ultrasonic Impact Treatment Part II: Ti-6Al-4V Titanium Alloy

Alexey Panin et al.

Summary: Experimental and theoretical studies have revealed the microstructure formation patterns in the surface layer of Ti-6Al-4V titanium alloy, including the mixed amorphous and nanocrystalline structures. Molecular dynamics simulations and ab initio calculations have provided insights into the phase transformations during ultrasonic impact treatment, with a proposed mechanism associating the development of strain-induced transformations with the presence of oxygen.

METALS (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

The Superstrength of Nanostructured Metallic Materials: Their Physical Nature and Hardening Mechanisms

R. Z. Valiev et al.

Summary: Ultrafine grained (UFG) metallic materials obtained by severe plastic deformation (SPD) exhibit very high strength properties, which can be attributed to the formation of UFG structure as well as other nanostructural features such as dislocation substructures, nanotwins, and nanosized precipitates of second phases. In addition, the structure and condition of grain boundaries, including their nonequilibrium state and the presence of grain boundary segregations, significantly contribute to the hardening of materials. Various approaches are discussed in this study to achieve high strengths in metallic materials by SPD.

PHYSICS OF METALS AND METALLOGRAPHY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Original The influence of severe plastic deformation on the thermal expansion of additively manufactured Ti6Al4V alloy

Zuzanka Trojanova et al.

Summary: In this study, the thermal expansion properties of Ti6Al4V alloy deposited with direct energy subjected to severe plastic deformation through ECAP were investigated in the temperature range of 23-700 ?. The results showed that the ECAP process significantly refined the grain structure, leading to a non-monotonic temperature dependence of the thermal expansion coefficient of the alloy.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of Water Cooling on the Microstructure of Electron Beam Additive-Manufactured Ti-6Al-4V

Alexey Panin et al.

Summary: The study investigated the effects of water cooling on the microstructure and phase composition of EBAM Ti-6Al-4V samples, showing that water cooling results in grain refinement and martensite structure refinement. Additionally, water cooling of the build platform leads to the precipitation of α' martensite platelets within α laths in the EBAM Ti-6Al-4V samples.

METALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of high pressure torsion process on the microhardness, microstructure and tribological property of Ti6Al4V alloy

Guanyu Deng et al.

Summary: The fully lamellar Ti6Al4V alloy was severely deformed using high pressure torsion (HPT) process, resulting in significant improvements in micro-hardness and grain size. The tribological properties of the alloy were investigated for the first time, showing a notable decrease in friction coefficient and specific wear rate with an increase in HPT revolutions. Overall, the HPT processed Ti6Al4V alloys displayed great potential in structural applications due to their enhanced mechanical and tribological properties.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Laser Additive 3D Printing of Titanium Alloys: Current Status, Problems, Trends

N. V. Kazantseva et al.

Summary: The study examined the features of 3D printing, focusing on laser melting of metal powders. It reviewed the impact of laser operation mode on the structure, residual stresses, and properties of manufactured metals, and proposed a method for choosing process parameters using single tracks as universal for all types of metal laser 3D printers. Additionally, it presented the structural characteristics and medical requirements for biocompatible materials, specifically discussing the biocompatible Ti-6Al-4V alloy manufactured by selective laser melting.

PHYSICS OF METALS AND METALLOGRAPHY (2021)

添加到收藏夹

Article Engineering, Mechanical

Scale levels of quasi-static and dynamic fracture behavior of Ti-6Al-4V parts built by various additive manufacturing methods

Alexey V. Panin et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Severe Plastic Deformation for Nanostructure Controls

Zenji Horita et al.

MATERIALS TRANSACTIONS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Decomposition of deformed α′(α) martensitic phase in Ti-6Al-4V alloy

Maciej Motyka et al.

MATERIALS SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Additive manufacturing of Ti6Al4V alloy: A review

Shunyu Liu et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dynamic Transformation of Two-Phase Titanium Alloys in Stable and Unstable States

Baoqi Guo et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

The alpha -> omega and beta -> omega phase transformations in Ti-Fe alloys under high-pressure torsion

A. R. Kilmametov et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dynamic transformation of Ti-6Al-4V during torsion in the two-phase region

Baoqi Guo et al.

JOURNAL OF MATERIALS SCIENCE (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

Friction-stir welding and processing of Ti-6Al-4V titanium alloy: A review

S. Mironov et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Factors influencing superplasticity in the Ti-6Al-4V alloy Processed by high-pressure torsion

Hamed Shahmir et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Grain refinement and superplastic flow in a fully lamellar Ti-6Al-4V alloy processed by high-pressure torsion

Wenjing Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Wire-based additive manufacturing using an electron beam as heat source

J. Fuchs et al.

WELDING IN THE WORLD (2018)

添加到收藏夹

Article Chemistry, Physical

First-principles study of the phase stability and elastic properties of Ti-X alloys (X = Mo, Nb, Al, Sn, Zr, Fe, Co, and O)

Wenchong Zhou et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

The influence of defect structures on the mechanical properties of Ti-6Al-4V alloys deformed by high-pressure torsion at ambient temperature

Zheng-Yang Hu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Article Physics, Condensed Matter

High-rate erosion of Ti-6Al-4V ultrafine-grained titanium alloy obtained via intensive plastic torsional deformation

A. D. Evstifeev et al.

PHYSICS OF THE SOLID STATE (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Using heat treatments, high-pressure torsion and post-deformation annealing to optimize the properties of Ti-6Al-4V alloys

Hamed Shahmir et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Predicting tensile properties of Ti-6Al-4V produced via directed energy deposition

Brian J. Hayes et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Physics, Applied

Effect of β-stabilizer elements on stacking faults energies and ductility of α-titanium using first-principles calculations

R. Salloom et al.

JOURNAL OF APPLIED PHYSICS (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Spatial and geometrical-based characterization of microstructure and microhardness for an electron beam melted Ti-6Al-4V component

Pan Wang et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Additive manufacturing of strong and ductile Ti-6Al-4V by selective laser melting via in situ martensite decomposition

W. Xu et al.

ACTA MATERIALIA (2015)

添加到收藏夹

Article Automation & Control Systems

Wire-feed additive manufacturing of metal components: technologies, developments and future interests

Donghong Ding et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of phase volume fraction on the grain refining of a Ti-6Al-4V alloy by high-pressure torsion

Jie Fu et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

The formation of α plus β microstructure in as-fabricated selective laser melting of Ti-6Al-4V

Marlo Simonelli et al.

JOURNAL OF MATERIALS RESEARCH (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ultrafine Grain Formation in a Ti-6Al-4V Alloy by Thermomechanical Processing of a Martensitic Microstructure

Qi Chao et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)

添加到收藏夹

Article Chemistry, Physical

Isothermal α formation in β metastable titanium alloys

E. Aeby-Gautier et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of heat treatment on microstructure and microhardness evolution in a Ti-6Al-4V alloy processed by high-pressure torsion

Ying Chun Wang et al.

JOURNAL OF MATERIALS SCIENCE (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Influence of phase volume fractions on the processing of a Ti-6Al-4V alloy by high-pressure torsion

Ying Chun Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Aging response of coarse- and fine-grained β titanium alloys

OM Ivasishin et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)

添加到收藏夹

Article Nanoscience & Nanotechnology

Superplastic behaviour of ultrafine-grained Ti-6A1-4V alloys

AV Sergueeva et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.