4.7 Article

Dominant role of ceramic connectivity in microwave dielectric properties of porous ceramics

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Nanoscience & Nanotechnology

Novel Method to Achieve Temperature-Stable Microwave Dielectric Ceramics: A Case in the Fergusonite-Structured NdNbO4 System

Di Zhou et al.

Summary: In this study, the fergusonite-to-scheelite phase transition temperature was lowered to 400°C by substituting smaller V5+ ions in Nd(Nb1-xVx)O4 ceramics, resulting in a near-zero TCF. This method of designing near-zero TCF compositions can be extended to other fergusonite systems.

ACS APPLIED MATERIALS & INTERFACES (2023)

Article Materials Science, Ceramics

MgTiO3-Ca1-xSm2x/3TiO3 (x=0.2-0.5) microwave dielectric composites with greatly improved temperature stability

Shuang Yang et al.

Summary: In this study, a series of (1 - y)MgTiO3-yCa(1-x)Sm(2x/3)TiO(3) composites with improved temperature stability were prepared by partially substituting Ca2+ in CaTiO3 with Sm3+. The results showed that with increasing Sm3+ content, the dielectric constant of the composites increased, and the nonlinearity of the change in resonant frequency with temperature and the rate of change of τ(f) with temperature decreased. This study is important for the development of temperature-stable microwave dielectric composites with constituent phases having opposite signs of τ(f).

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2023)

Article Chemistry, Physical

Design and Fabrication of a Satellite Communication Dielectric Resonator Antenna with Novel Low Loss and Temperature- Stabilized (Sm1-XCaX) (Nb1-XMoX)O4 (X=0.15-0.7) Microwave Ceramics

Fangfang Wu et al.

Summary: The microwave band correlation between phase transition-structure-dielectric properties in the SNCMo@x system was investigated. It was found that the substitution of Ca and Mo ions played a crucial role in determining the permittivity and stability of the ceramics. The SNCMo@0.18 ceramic showed the best microwave dielectric performance at 8.80 GHz frequency.

CHEMISTRY OF MATERIALS (2023)

Article Nanoscience & Nanotechnology

Obtaining Greatly Improved Dielectric Constant in BaTiO3-Epoxy Composites with Low Ceramic Volume Fraction by Enhancing the Connectivity of Ceramic Phase

Meng Cao et al.

Summary: This study demonstrates a strategy to overcome the challenge of obtaining a high dielectric constant in ceramic-polymer composites with low ceramic volume fraction. By using a high sintering temperature and introducing a porogen, the researchers were able to obtain BaTiO3 ceramics with high porosity and great connectivity. The composites prepared with these ceramics showed improved dielectric constants at low ceramic volume fractions. The composite with a sintering temperature of 1300 degrees C and a ceramic volume fraction of 38.1% exhibited a dielectric constant of 466.8, which was about nine times higher compared to the counterpart with a higher ceramic volume fraction of 60.8%. The composite also exhibited low dielectric loss and good frequency and temperature stability, indicating its potential for practical applications. Finite element simulation showed that the enhanced connectivity of BaTiO3 played a key role in the dielectric response of the composite.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Chemistry, Physical

High-strength and low-dielectric porous Si3N4 ceramics prepared by gelcasting using DMAA

Shuang Yin et al.

Summary: The porous Si3N4 ceramics with excellent mechanical and dielectric properties were successfully fabricated using gelcasting with DMAA gel system as a pore-former. Increasing monomer content led to higher porosity, pore connectivity, and improved flexural strength and fracture toughness, making the ceramics suitable for microwave-transparent applications.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Materials Science, Ceramics

Temperature dependence of ?f and its origin in MgTiO3-CaTiO3 microwave dielectric composites

Shuang Yang et al.

Summary: The study reveals the strong temperature dependence of tau f, a key parameter in microwave dielectric ceramics. The normalized resonant frequency f0 of the composites with near-zero tau f,W first increases and then decreases with temperature. The temperature dependence of tau f can be suppressed by adopting constituting phases with lower nonlinearity and tau f,W.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

Article Nanoscience & Nanotechnology

Obtaining Greatly Improved Dielectric Constant in BaTiO3-Epoxy Composites with Low Ceramic Volume Fraction by Enhancing the Connectivity of Ceramic Phase

Meng Cao et al.

Summary: This study demonstrates a strategy to obtain high dielectric constant (εr) BaTiO3 ceramics with improved connectivity and high porosity, leading to the preparation of composites with enhanced εr at low ceramic volume fraction. These composites show low dielectric loss, good frequency and temperature stability, and great potential for practical applications.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Chemistry, Physical

Greatly enhanced permittivity in BaTiO3-epoxy dielectric composites with improved connectivity of ceramic phase

Meng Cao et al.

Summary: BaTiO3-epoxy dielectric composites prepared by partial sintering exhibit significantly enhanced permittivity and improved phase connectivity. Controlling the phase connectivity can achieve a good combination of temperature-stable high permittivity, low dielectric loss, and relatively low ceramic fraction.

JOURNAL OF MATERIOMICS (2021)

Article Physics, Applied

Nonlinear variation of resonant frequency with temperature and temperature-dependent τf in Al2O3-TiO2 microwave dielectric composites

Lei Li et al.

Summary: The temperature coefficient of resonant frequency in microwave dielectric ceramics is not constant and depends on the permittivity of constituting phases and mixing rules. It is crucial to measure resonant frequency at more temperatures to accurately evaluate frequency shifts in practical applications. Engineering microstructures and adopting suitable phases can potentially suppress the temperature-dependent behavior of resonant frequency and coefficient.

APPLIED PHYSICS LETTERS (2021)

Article Materials Science, Ceramics

Microwave and terahertz properties of porous Ba4(Sm,Nd,Bi)28/3Ti18O54 ceramics obtained by sacrificial template method

Yugu Chen et al.

Summary: Lightweight porous BSNBT ceramics with high relative dielectric constant were developed using sacrificial template method, showing potential for applications in satellite communication and wearable devices.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2021)

Article Materials Science, Ceramics

High-Q and temperature-stable microwave dielectrics in layer cofired Zn1.01Nb2O6/TiO2/Zn1.01Nb2O6 ceramic architectures

Jie Zhang et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)

Article Engineering, Electrical & Electronic

The dimensional effect of MgTiO3 ceramic filler on the microwave dielectric properties of PTFE/MgTiO3 composite with ultra-low dielectric loss

Haiyi Peng et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)

Article Materials Science, Ceramics

Novel high dielectric constant and low loss PTFE/CNT composites

Haiyi Peng et al.

CERAMICS INTERNATIONAL (2018)

Article Materials Science, Multidisciplinary

Effect of porosity and microstructure on the microwave dielectric properties of rutile

Wei Luo et al.

MATERIALS LETTERS (2017)

Article Materials Science, Ceramics

The dielectric constant and quality factor calculation of the microwave dielectric ceramic solid solutions

Hetuo Chen et al.

CERAMICS INTERNATIONAL (2017)

Article Engineering, Electrical & Electronic

Measurement Error of Temperature Coefficient of Resonant Frequency for Microwave Dielectric Materials by TE01δ-Mode Resonant Cavity Method

Lei Li et al.

IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES (2016)

Article Materials Science, Multidisciplinary

Effects of hollow Zn2SiO4 particles addition on dielectric properties of isotactic polypropylene-HW composites

Susumu Takahashi et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2016)

Article Materials Science, Multidisciplinary

Effects of hollow Zn2SiO4 particles addition on dielectric properties of isotactic polypropylene-HW composites

Susumu Takahashi et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2016)

Review Materials Science, Multidisciplinary

Low-loss dielectric ceramic materials and their properties

M. T. Sebastian et al.

INTERNATIONAL MATERIALS REVIEWS (2015)

Article Nanoscience & Nanotechnology

Performance of Dielectric Nanocomposites: Matrix-Free, Hairy Nanoparticle Assemblies and Amorphous Polymer-Nanoparticle Blends

Christopher A. Grabowski et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Review Chemistry, Multidisciplinary

Flexible Nanodielectric Materials with High Permittivity for Power Energy Storage

Zhi-Min Dang et al.

ADVANCED MATERIALS (2013)

Article Materials Science, Ceramics

Frequency-dependent Qf value of low-loss Ba2Ti9O20 ceramics at microwave frequencies

Lei Li et al.

CERAMICS INTERNATIONAL (2012)

Article Materials Science, Ceramics

Microwave dielectric properties of PTFE/CaTiO3 polymer ceramic composites

Yunxiang Hu et al.

CERAMICS INTERNATIONAL (2011)

Article Materials Science, Multidisciplinary

Ba(Mg1/3Ta2/3)O3 filled PTFE composites for microwave substrate applications

Nijesh K. James et al.

MATERIALS CHEMISTRY AND PHYSICS (2010)

Article Materials Science, Ceramics

SrTiO3-Filled PTFE Composite Laminates for Microwave Substrate Applications

Surendran Rajesh et al.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2009)

Article Materials Science, Multidisciplinary

Rutile filled PTFE composites for flexible microwave substrate applications

S. Rajesh et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2009)

Article Engineering, Chemical

Polystyrene/Sr2Ce2Ti5O15 Composites with Low Dielectric Loss for Microwave Substrate Applications

G. Subodh et al.

POLYMER ENGINEERING AND SCIENCE (2009)

Article Materials Science, Ceramics

Permittivity of porous titanate dielectrics

Zachary N. Wing et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)

Article Materials Science, Ceramics

Characterization of MgTiO3-CaTiO3-layered microwave dielectric resonators with TE01δ mode

L Li et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)

Article Materials Science, Ceramics

Microwave dielectric characteristics and finite element analysis of MgTiO3-CaTiO3 layered dielectric resonators

Lei Li et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2006)

Article Materials Science, Ceramics

Effect of nonstoichiometry on the structure and microwave dielectric properties of Ba(Co1/3Nb2/3)O-3 ceramics

F. Azough et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2006)

Article Engineering, Electrical & Electronic

Tailored and anisotropic dielectric constants through porosity in ceramic components

X Gong et al.

IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES (2005)

Article Materials Science, Ceramics

Thermoplastic green machining for textured dielectric substrate for broadband miniature antenna

YH Koh et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2005)

Article Engineering, Electrical & Electronic

Topology design optimization of dielectric substrates for bandwidth improvement of a patch antenna

G Kiziltas et al.

IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2003)

Article Engineering, Electrical & Electronic

Wide bandgap composite EBG substrates

WJ Chappell et al.

IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION (2003)

Review Engineering, Electrical & Electronic

Dielectric materials, devices, and circuits

SJ Fiedziuszko et al.

IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES (2002)

Article Materials Science, Multidisciplinary

Improved high Q value of MgTiO3-CaTiO3 microwave dielectric ceramics at low sintering temperature

CL Huang et al.

MATERIALS RESEARCH BULLETIN (2001)

Article Materials Science, Multidisciplinary

Microwave dielectric properties of (1-x)Cu3Nb2O8-xZn3Nb2O8 ceramics

DW Kim et al.

JOURNAL OF MATERIALS RESEARCH (2001)