☆ 4.6 Article

Study on combustion characteristics of sinusoidal hydrogen pulsed jet with different frequencies in supersonic flows

ACTA ASTRONAUTICA (2024)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Numerical investigation on the performance and combustion characteristics of a cavity based scramjet combustor with novel strut injectors

Sai Sreekar Yarasai et al.

Summary: A numerical investigation was conducted to analyze the performance and combustion characteristics of a scramjet combustor with and without a cavity. Different geometrical shapes of injectors were considered, including circle, square, and rectangle. The results showed that the circular injector with a cavity exhibited better mixing and combustion characteristics compared to the other injector models.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2023)

添加到收藏夹

Article Energy & Fuels

Effect of different strut design on the mixing performance of H2 fueled two-strut based scramjet combustor

Gautam Choubey et al.

Summary: The shape of the struts significantly affects the combustion mechanism in scramjet engines. Researchers have found that a semi-circular trailing edge half-wedge strut is the most effective configuration, ensuring better combustion performance. Increasing the inward fuel injection angle improves the mixing performance of the two-strut scramjet combustor.

FUEL (2023)

添加到收藏夹

Article Engineering, Aerospace

Effects of pulsed injection on ignition delay and combustion performance in a hydrogen-fuel scramjet combustor

Zan He et al.

Summary: This paper investigates the pulsed injection of hydrogen fuel in a pulse combustion wind tunnel and analyzes its effects on ignition delay and combustion performance. The results show that pulsed injection at a specific frequency can reduce the ignition delay of hydrogen and enhance its combustion performance, achieving energy release comparable to steady injection at higher equivalence ratios. The pulse frequency does not significantly affect hydrogen combustion performance.

ACTA ASTRONAUTICA (2022)

添加到收藏夹

Article Energy & Fuels

Numerical investigation on geometric sensitivity and flame stabilisation mechanism in H2 fueled two-strut based scramjet combustor

Gautam Choubey et al.

Summary: Geometric variation has a significant influence on the performance study of a supersonic combustor. Increasing the ramp position leads to a slight improvement in combustion efficiency but also increases total pressure loss. Additionally, increasing the divergence angle on both walls weakens the combustion performance to some extent.

FUEL (2022)

添加到收藏夹

Article Chemistry, Physical

Effect of inclined fuel injection in the strut wake region for a hydrogen fueled scramjet combustor

Obula Reddy Kummitha

Summary: This study investigates the effect of parallel and inclined fuel injection in the strut flame holder wake region. The results show that inclined injection significantly improves mixing and combustion efficiency.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

添加到收藏夹

Article Chemistry, Physical

Effect of oblique shock wave induced from a wavy-wall combustor surface for a splitter plate scramjet combustor

Obula Reddy Kummitha

Summary: This research analyzes the interaction between multiple oblique shock waves and the shear layer in a scramjet combustor. The internal flow field with and without a modified wall surface is studied using numerical simulations. The findings illustrate the significant impact of oblique shock waves on fuel-air mixing and reaction mechanisms.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

添加到收藏夹

Article Engineering, Aerospace

Influence of isolator section on the shock augmented mixing in SCRAMJET engine

Vatsalya Sharma et al.

Summary: This paper numerically studies the effect of isolator design on shock-augmented mixing in a supersonic Ramjet engine. The results show that changing the length of the isolator section has limited impact on the mixing efficiency. The authors conclude that the isolator dimensions can be chosen based on flow homogenization considerations.

AEROSPACE SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Energy & Fuels

Computational investigation of multi hydrogen jets at inclined supersonic flow

M. Barzegar Gerdroodbary et al.

Summary: This study investigates the influence of free stream angles on fuel mixing in scramjet design, showing that a positive angle can lead to more uniform expansion of the fuel mixing zone. Increasing the angles of the free stream reduces the mixing zone when the fuel jet interaction decreases, with a mixing efficiency of -20 degrees about 30% more than other angles.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Injection of hydrogen sonic multi-jet on inclined surface at supersonic flow

Amin Hassanvand et al.

Summary: The study investigates the effects of multiple hydrogen jets on an inclined surface in supersonic airflow, finding that mixing performance improves at high jet pressure and with increasing angle of the exterior surface. The study also highlights the significant impact of power and slant of the separation shock on the size of the mixing zone.

INTERNATIONAL JOURNAL OF MODERN PHYSICS C (2021)

添加到收藏夹

Article Energy & Fuels

Hydrogen fueled scramjet combustor with a wavy-wall double strut fuel injector

Obula Reddy Kummitha et al.

Summary: The global demand for enhanced scramjet engine performance is increasing, with the main challenge being the mixing of fuel and air. Research has shown that using a wavy wall surface and double strut fuel injector can significantly improve mixing efficiency and combustion phenomenon.

FUEL (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Effect of wavy wall strut fuel injector on shock wave development and mixing enhancement of fuel and air for a scramjet combustor

Obula Reddy Kummitha et al.

Summary: The study investigated the effects of shock wave generation using an unconventional strut under different flow conditions, and found that the wavy wall strut injector had a significant impact on shear mixing and turbulence.

JOURNAL OF COMPUTATIONAL DESIGN AND ENGINEERING (2021)

添加到收藏夹

Article Chemistry, Physical

Effect of a revolved wedge strut induced mixing enhancement for a hydrogen fueled scramjet combustor

Obula Reddy Kummitha et al.

Summary: The research introduces an innovative fuel injection strut to enhance mixing performance by increasing interactions between shock wave and shear mixing layer. Numerical analysis shows that the new strut significantly improves mixing efficiency compared to the basic wedge design.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

添加到收藏夹

Article Thermodynamics

Investigation of an optimal pulsed jet mixing and combustion in supersonic crossflow

Majie Zhao et al.

Summary: The study investigates the enhanced mixing and combustion mechanism of a pulsed sonic jet with optimal frequency in supersonic crossflow using Large Eddy Simulation (LES). The results show significant effects on mixing process and flame distribution by different rotating shear layer vortex structures, with further improvement observed in the mixing and combustion efficiency with the optimal pulsed jet frequency.

COMBUSTION AND FLAME (2021)

添加到收藏夹

Article Thermodynamics

The effect of sinusoidal wall on hydrogen jet mixing rate considering supersonic flow

Zhixiong Li et al.

ENERGY (2020)

添加到收藏夹

Article Engineering, Aerospace

Numerical simulations of high frequency transverse pulsed jet injection into a supersonic crossflow

Nehemiah J. Williams et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Review Engineering, Aerospace

Review of combustion stabilization for hypersonic airbreathing propulsion

Qili Liu et al.

PROGRESS IN AEROSPACE SCIENCES (2020)

添加到收藏夹

Article Thermodynamics

RANS study of steady and pulsed gaseous jets into a supersonic crossflow

Zhao-bo Du et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Chemistry, Physical

URANS study of pulsed hydrogen jet characteristics and mixing enhancement in supersonic crossflow

Majie Zhao et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

添加到收藏夹

Article Engineering, Aerospace

RANS investigation of the effect of pulsed fuel injection on scramjet HyShot II engine

Song Chen et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Article Mechanics

Reynolds-average Navier-Stokes study of steady and pulsed gaseous jets with different periods for the shock-induced combustion ramjet engine

Zhao-bo Du et al.

PHYSICS OF FLUIDS (2019)

添加到收藏夹

Article Engineering, Aerospace

The influence of micro air jets on mixing augmentation of fuel in cavity flameholder at supersonic flow

Keivan Fallah et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Large-eddy simulation of a pulsed jet into a supersonic crossflow

Haitao Shi et al.

COMPUTERS & FLUIDS (2016)

添加到收藏夹

Article Mechanics

Large eddy simulation of a pulsed jet in cross-flow

Axel Coussement et al.

JOURNAL OF FLUID MECHANICS (2012)

添加到收藏夹

Article Mechanics

Optimization of pulsed jets in crossflow

Rajes Sau et al.

JOURNAL OF FLUID MECHANICS (2010)

添加到收藏夹

Article Engineering, Aerospace

Numerical Study of Supersonic Combustion Processes with Central Strut Injection

Marius C. Banica et al.

JOURNAL OF PROPULSION AND POWER (2010)

添加到收藏夹

Article Engineering, Aerospace

Numerical study of mixing enhancement by shock waves in model scramjet engine

JH Kim et al.

AIAA JOURNAL (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.