☆ 4.8 Article

Photopically Transparent Organic Solar Cells with Tungsten Oxide-Based Multilayer Electrodes

ACS APPLIED MATERIALS & INTERFACES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Analytical

Flexible CdSe/ZnS Quantum-Dot Light-Emitting Diodes with Higher Efficiency than Rigid Devices

Mijin Kim et al.

Summary: The reliable manufacture of flexible transparent electrode is important for the fabrication of high-performance, flexible QLEDs. In this study, we deposited a transparent oxide/metal/oxide (OMO) electrode on a polymer planarization layer and achieved good electron supply and injection. The high-performance flexible QLEDs fabricated using these electrodes had significantly higher current efficiency than rigid QLEDs with ITO electrodes.

MICROMACHINES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of substrate temperature on the near-infrared shielding properties of WO3-x thin films deposited by RF magnetron sputtering

Anjana S. Nair et al.

Summary: This work investigates tungsten oxide thin films deposited by RF magnetron sputtering on glass substrates for potential near-infrared shielding applications. The films were characterized for their structural, morphological and compositional properties, with the lowest NIR transmittance observed for WO3-x films deposited at 500 degrees C. The study demonstrates the significance of using undoped WO3-x thin films for efficient near-infrared shielding.

VACUUM (2022)

添加到收藏夹

Article Energy & Fuels

Building-integrated photovoltaic smart window with energy generation and conservation

Yun Meng et al.

Summary: Energy usage in buildings accounts for 40% of global energy consumption, while windows are the least energy efficient part of buildings. The proposed photovoltaic smart window integrates energy modulation, energy generation, and low emissivity functions to improve energy efficiency.

APPLIED ENERGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

High-performance semitransparent organic solar cells enabled by pseudo-planar heterojunction structures combined with optical engineering

Ding Yang et al.

Summary: In this study, a pseudo-planar heterojunction (PPHJ) active layer and an effective anti-reflective covering layer were utilized to improve the performance and average visible transmittance (AVT) of semitransparent organic solar cells (ST-OSCs), demonstrating a unique approach for enhancing both AVT and power-conversion efficiency (PCE).

JOURNAL OF MATERIALS CHEMISTRY C (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Latest Progress on Photoabsorbent Materials for Multifunctional Semitransparent Organic Solar Cells

Gururaj P. Kini et al.

Summary: Semi-transparent organic solar cells (ST-OSCs) have shown significant progress recently, with increased power conversion efficiency and average visible transparency, achieved through the use of low bandgap semiconductors. This technology has transformed traditional OSC devices into multifunctional devices, paving the way for future applications in various fields.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Recently-explored top electrode materials for transparent organic solar cells

Jing-Jing Shen

Summary: Transparent photovoltaics on building surfaces, such as windows and siding, have the potential to revolutionize renewable energy generation. Organic solar cells offer advantages including high absorption coefficients, flexibility, lightweight, and low cost, but require compatible active materials and suitable top conductive electrodes. Research on transparent organic solar cells has shown that materials like transparent conductive oxides, carbon-based conductive polymers, and metallic nanowires can provide high efficiency photovoltaics, promising a more sustainable energy future.

SYNTHETIC METALS (2021)

添加到收藏夹

Article Chemistry, Physical

Laser-induced photocoloration in molybdenum oxide thin films

M. F. Al-Kuhaili et al.

Summary: Photocoloration refers to the change in color of a transparent material exposed to UV light, with the effect being enhanced by UV lasers. The color change is influenced by the structural and chemical properties of the material, leading to variations in optical properties. Molybdenum oxide shows a superior coloration response to UV radiation, with its absorption bands and valence states analyzed to understand the coloration mechanisms.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Energy & Fuels

Exploiting Ternary Blends to Accurately Control the Coloration of Semitransparent, Non-Fullerene, Organic Solar Cells

Na Gyeong An et al.

Summary: This study demonstrates the successful achievement of semitransparent organic solar cells with controllable colors using non-fullerene acceptors and narrow or ultra-wide bandgap donors and acceptors. By modulating the ratios of different materials, the researchers were able to achieve balanced power conversion efficiencies and average visible transmittances for a range of colors, providing a foundation for improving the commercial viability of semitransparent organic solar cells.

SOLAR RRL (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhanced Thermal Stability of Inverted Polymer Solar Cells Based on Solution-Processed WOx as an Anode Interlayer

Cristiano Albonetti et al.

Summary: The optimization of device efficiency, stability, and large area processing in polymer solar cells is a major challenge, with interlayers playing a crucial role. This study compared the thermal stability of inverted polymer solar cells with different metal oxide interlayers, highlighting the advantages of using tungsten oxide. The results showed a positive effect of tungsten oxide interlayer on device thermal stability, with efficiency decay being lower compared to molybdenum oxide.

PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

High-Performance Semi-Transparent Organic Photovoltaic Devices via Improving Absorbing Selectivity

Yaokai Li et al.

Summary: This study demonstrates the importance of manipulating the optical properties of materials to improve the light-absorbing selectivity of semi-transparent organic photovoltaics (ST-OPVs), resulting in high-efficiency ST-OPVs with improved light utilization efficiency and good color rendering index.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Semi-Transparent Organic Photovoltaic Cells with Dielectric/Metal/Dielectric Top Electrode: Influence of the Metal on Their Performances

Linda Cattin et al.

Summary: By using MoO3/Ag/MoO3 as the top anode, semi-transparent organic photovoltaic cells (OPVs) achieved high transparency and low sheet resistance in the visible light range, with an efficiency only 20% lower than opaque OPVs and close to 50% transparency. However, using MoO3/Ag/Cu:Ag/ZnS as the top anode resulted in lower efficiency due to Cu diffusion causing degradation of the anode/organic material contact.

NANOMATERIALS (2021)

添加到收藏夹

Review Energy & Fuels

Progress in Semitransparent Organic Solar Cells

Leiping Duan et al.

Summary: Opaque and semitransparent organic solar cells have made significant progress in recent years, with efficiencies reaching over 18% and 13% respectively. These solar cells do not contain harmful elements such as lead, making them suitable for a wide range of applications. There is great potential for emerging applications such as building-integrated photovoltaics, and ongoing research aims to further enhance the performance and application potential of ST-OSCs.

SOLAR RRL (2021)

添加到收藏夹

Article Energy & Fuels

Recent advances of semitransparent organic solar cells

Shuo Han et al.

Summary: This review discusses recent advances in transparent top electrodes and active materials for highly efficient STOSCs, as well as the application of optical engineering in this field.

SOLAR ENERGY (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Design and fabrication of a semi-transparent solar cell considering the effect of the layer thickness of MoO3/Ag/MoO3 transparent top contact on optical and electrical properties

Caglar Cetinkaya et al.

Summary: The study designed and manufactured a semi-transparent organic solar cell, confirming the potential for high performance through optimization of optical and electrical parameters.

SCIENTIFIC REPORTS (2021)

添加到收藏夹

Article Chemistry, Physical

Low-Temperature Oxide/Metal/Oxide Multilayer Films as Highly Transparent Conductive Electrodes for Optoelectronic Devices

Yunlong Zhang et al.

Summary: Transparent conductors are crucial for optoelectronic and flexible electronic devices, with oxide/metal/oxide (OMO) multilayer films showing promise as an alternative to traditional transparent conductive oxides (TCOs). However, deposition methods like magnetron sputtering or thermal evaporation can lead to device performance deterioration due to ion bombardment or high temperatures. New techniques, such as reactive plasma deposition (RPD) for high-quality MGZO films and ultrathin Ag films prepared by magnetron sputtering, are being explored to improve conductivity and transmittance in OMO structures.

ACS APPLIED ENERGY MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Increasing the nucleation and growth barrier of a non-fullerene acceptor to achieve bicontinuous pathways in semitransparent ternary polymer solar cells

Yadi Liu et al.

Summary: The morphology of the active layer significantly affects the power conversion efficiency of semitransparent polymer solar cells. By adding a third component to balance aggregation rates, it is possible to inhibit the intense aggregation of non-fullerene acceptors and achieve a suitable domain size for both donors and acceptors.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

添加到收藏夹

Article Chemistry, Physical

Foldable Semitransparent Organic Solar Cells for Photovoltaic and Photosynthesis

Wei Song et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Semitransparent Organic Solar Cells Enabled by a Sequentially Deposited Bilayer Structure

Yu Song et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-Performance Semitransparent Organic Solar Cells with Excellent Infrared Reflection and See-Through Functions

Di Wang et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Energy & Fuels

Dichroic Sb2O3/Ag/Sb2O3 Electrodes for Colorful Semitransparent Organic Solar Cells

Seyeong Song et al.

SOLAR RRL (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Color-neutral, semitransparent organic photovoltaics for power window applications

Yongxi Li et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2020)

添加到收藏夹

Article Chemistry, Physical

Semitransparent Organic Solar Cells with Vivid Colors

Xue Li et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Review Chemistry, Physical

A critical review on semitransparent organic solar cells

Zhenghao Hu et al.

NANO ENERGY (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Solution-Processed Semitransparent Organic Photovoltaics: From Molecular Design to Device Performance

Viktor V. Brus et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Semitransparent ternary nonfullerene polymer solar cells exhibiting 9.40% efficiency and 24.6% average visible transmittance

Zhenghao Hu et al.

NANO ENERGY (2019)

添加到收藏夹

Article Chemistry, Physical

Highly Transparent Organic Solar Cells with All-NearInfrared Photoactive Materials

Yuanpeng Xie et al.

SMALL METHODS (2019)

添加到收藏夹

Article Chemistry, Physical

Semitransparent polymer solar cells with 9.06% efficiency and 27.1% average visible transmittance obtained by employing a smart strategy

Zhenghao Hu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Highly-efficient semi-transparent organic solar cells utilising non-fullerene acceptors with optimised multilayer MoO3/Ag/MoO3 electrodes

Guangjun Sun et al.

MATERIALS CHEMISTRY FRONTIERS (2019)

添加到收藏夹

Article Chemistry, Physical

Controlling Blend Morphology for Ultrahigh Current Density in Nonfullerene Acceptor-Based Organic Solar Cells

Xin Song et al.

ACS ENERGY LETTERS (2018)

添加到收藏夹

Article Chemistry, Physical

Simultaneously improved efficiency and average visible transmittance of semitransparent polymer solar cells with two ultra-narrow bandgap nonfullerene acceptors

Xiaoling Ma et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

添加到收藏夹

Article Physics, Applied

Improvement of optical and electric characteristics of MoO3/Ag film/MoO3 flexible transparent electrode with metallic grid

Chen-Tao Wang et al.

JOURNAL OF APPLIED PHYSICS (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Color tunable low cost transparent heat reflector using copper and titanium oxide for energy saving application

Goutam Kumar Dalapati et al.

SCIENTIFIC REPORTS (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Highly Efficient Semitransparent Polymer Solar Cells with Color Rendering Index Approaching 100 Using One-Dimensional Photonic Crystal

Wenjuan Yu et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

添加到收藏夹

Article Physics, Applied

Interfacial thermal degradation in inverted organic solar cells

William Greenbank et al.

APPLIED PHYSICS LETTERS (2015)

添加到收藏夹

Review Materials Science, Multidisciplinary

Metal oxide semiconducting interfacial layers for photovoltaic and photocatalytic applications

Naveen Kumar Elumalai et al.

MATERIALS FOR RENEWABLE AND SUSTAINABLE ENERGY (2015)

添加到收藏夹

Review Chemistry, Multidisciplinary

25th Anniversary Article: Rise to Power - OPV-Based Solar Parks

Frederik C. Krebs et al.

ADVANCED MATERIALS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Flexible organic solar cells using an oxide/metal/oxide trilayer as transparent electrode

Weiran Cao et al.

ORGANIC ELECTRONICS (2012)

添加到收藏夹

Article Chemistry, Physical

Relationship between Diode Saturation Current and Open Circuit Voltage in Poly(3-alkylthiophene) Solar Cells as a Function of Device Architecture, Processing Conditions, and Alkyl Side Chain Length

Derek M. Stevens et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2011)

添加到收藏夹

Article Chemistry, Physical

Optical Properties of WO3/Ag/WO3 Multi layer As Transparent Cathode in Top-Emitting Organic Light Emitting Diodes

Kihyon Hong et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2011)

添加到收藏夹

Article Energy & Fuels

Opportunities and challenges in science and technology of WO3 for electrochromic and related applications

Satyen K. Deb

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.