相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Tailoring the Void Space of a Silicon Anode for High-Capacity and Low-Expansion Lithium Storage
Hideyuki Nakano et al.
ENERGY TECHNOLOGY (2022)
Study on Microstructure and Mechanical Properties of the Al-25Cr-5Si (at%) Alloy Powder Using Gas-Atomization and SPS Process
Yong-Ho Kim et al.
METALS AND MATERIALS INTERNATIONAL (2021)
A numerical study of irregular eutectic in Al-Si alloys under a large undercooling
Xiaohui Ao et al.
COMPUTATIONAL MATERIALS SCIENCE (2021)
Synthesis of porosity controllable nanoporous silicon with a self-coated nickel layer for lithium-ion batteries
Jae-Ik Hyun et al.
JOURNAL OF POWER SOURCES (2021)
Suppression of thermal runaway by continuous heat generation using porous silicon covered with a thin oxide layer
Hideyuki Nakano et al.
JOURNAL OF POWER SOURCES (2021)
Controlled synthesis of copper reinforced nanoporous silicon microsphere with boosted electrochemical performance
Yuan Tao et al.
JOURNAL OF POWER SOURCES (2020)
A simple method to fabricate size and porosity tunable Si by Al-Si alloy as lithium ion battery anode material
Jifei Sun et al.
ELECTROCHIMICA ACTA (2020)
Mechanistic understanding of pore evolution enables high performance mesoporous silicon production for lithium-ion batteries
Jake E. Entwistle et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Scalable synthesis of ant-nest-like bulk porous silicon for high-performance lithium-ion battery anodes
Weili An et al.
NATURE COMMUNICATIONS (2019)
Largely Improved Battery Performance Using a Microsized Silicon Skeleton Caged by Polypyrrole as Anode
Yingying Lv et al.
ACS NANO (2019)
Selective leaching of Al from hypereutectic Al-Si alloy to produce nano-porous silicon (NPS) anodes for lithium ion batteries
Anil D. Pathak et al.
ELECTROCHIMICA ACTA (2019)
C2H2O4 etching of AlSi alloy Powder:an efficient and mild preparation approach for high performance micro Si anode
Weiyi Cao et al.
ELECTROCHIMICA ACTA (2019)
Particle size optimization enabled high initial coulombic efficiency and cycling stability of micro-sized porous Si anode via AlSi alloy powder etching
Weiyi Cao et al.
ELECTROCHIMICA ACTA (2019)
Porosity controlled synthesis of nanoporous silicon by chemical dealloying as anode for high energy lithium-ion batteries
Yuan Tao et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)
Scalable Engineering of Bulk Porous Si Anodes for High Initial Efficiency and High-Areal-Capacity Lithium-Ion Batteries
Xiang Han et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Synthesis of Si anode with a microsized-branched structure from recovered Al scrap for use in Li-Ion batteries
Yinjie Cen et al.
JOURNAL OF POWER SOURCES (2019)
Experimental study on the cycling stability and corrosive property of Al-Si alloys as phase change materials in high-temperature heat storage
Y. Zhao et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)
Green, Scalable, and Controllable Fabrication of Nanoporous Silicon from Commercial Alloy Precursors for High-Energy Lithium-Ion Batteries
Yongling An et al.
ACS NANO (2018)
Morphology- and Porosity-Tunable Synthesis of 3D Nanoporous SiGe Alloy as a High-Performance Lithium-Ion Battery Anode
Yinghui Yang et al.
ACS NANO (2018)
Microstructure Controlled Porous Silicon Particles as a High Capacity Lithium Storage Material via Dual Step Pore Engineering
Myungbeom Sohn et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Highly porous carbon-coated silicon nanoparticles with canyon-like surfaces as a high-performance anode material for Li-ion batteries
Bokyung Kim et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
A review of magnesiothermic reduction of silica to porous silicon for lithium-ion battery applications and beyond
Jake Entwistle et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Morphology, composition and electrochemistry of a nano-porous silicon versus bulk silicon anode for lithium-ion batteries
Tianchan Jiang et al.
JOURNAL OF MATERIALS SCIENCE (2017)
Coralloid-like Nanostructured c-nSi/SiOx@Cy Anodes for High Performance Lithium Ion Battery
Xianhuan Zhuang et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
High-Rate and Long-Cycle Silicon/Porous Nitrogen-Doped Carbon Anode via a Low-Cost Facile Pre-Template-Coating Approach for Li-ion Batteries
Xiong Zhou et al.
ELECTROCHIMICA ACTA (2017)
Tuning Porosity and Surface Area in Mesoporous Silicon for Application in Li-Ion Battery Electrodes
John B. Cook et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Porous silicon from the magnesiothermic reaction as a high-performance anode material for lithium ion battery applications
Peibo Gao et al.
ELECTROCHIMICA ACTA (2017)
Nanostructured Silicon Anodes for High-Performance Lithium-Ion Batteries
Md. Arafat Rahman et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
Enhanced Electrochemical Performance of Heterogeneous Si/MoSi2 Anodes Prepared by a Magnesiothermic Reduction
Lili Wu et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Additive manufacturing of metals
Dirk Herzog et al.
ACTA MATERIALIA (2016)
Free-Standing Si/Graphene Paper Using Si Nanoparticles Synthesized by Acid-Etching Al-Si Alloy Powder for High-Stability Li-Ion Battery Anodes
Heng Jiang et al.
ELECTROCHIMICA ACTA (2016)
Preparation of three-dimensional nanoporous Si using dealloying by metallic melt and application as a lithium-ion rechargeable battery negative electrode
Takeshi Wada et al.
JOURNAL OF POWER SOURCES (2016)
Precise Perforation and Scalable Production of Si Particles from Low-Grade Sources for High-Performance Lithium Ion Battery Anodes
Linqi Zong et al.
NANO LETTERS (2016)
A high-performance nanoporous Si/Al2O3 foam lithium-ion battery anode fabricated by selective chemical etching of the Al-Si alloy and subsequent thermal oxidation
Gaeun Hwang et al.
CHEMICAL COMMUNICATIONS (2015)
Effect of nano Cu coating on porous Si prepared by acid etching Al-Si alloy powder
Chunli Li et al.
ELECTROCHIMICA ACTA (2015)
Micro-sized nano-porous Si/C anodes for lithium ion batteries
Huajun Tian et al.
NANO ENERGY (2015)
An easy way for preparing high performance porous silicon powder by acid etching Al-Si alloy powder for lithium ion battery
Zhiyu Jiang et al.
ELECTROCHIMICA ACTA (2014)
Analysis of the influence of the gas velocity, particle size and nucleation temperature on the thermal history and microstructure development in the tool steel during atomization
M. Behulova et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Large-Scale Fabrication, 3D Tomography, and Lithium-Ion Battery Application of Porous Silicon
Mingyuan Ge et al.
NANO LETTERS (2014)
Bulk-Nanoporous-Silicon Negative Electrode with Extremely High Cyclability for Lithium-Ion Batteries Prepared Using a Top-Down Process
Takeshi Wada et al.
NANO LETTERS (2014)
Mesoporous silicon sponge as an anti-pulverization structure for high-performance lithium-ion battery anodes
Xiaolin Li et al.
NATURE COMMUNICATIONS (2014)
Large-scale synthesis of Si@C three-dimensional porous structures as high-performance anode materials for lithium-ion batteries
Chengmao Xiao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Nanometer-scale Sn coatings improve the performance of silicon nanowire LIB anodes
Alireza Kohandehghan et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Mussel-Inspired Adhesive Binders for High-Performance Silicon Nanoparticle Anodes in Lithium-Ion Batteries
Myung-Hyun Ryou et al.
ADVANCED MATERIALS (2013)
The nanostructure of the Si-Al eutectic and its use in lithium batteries
Wenchao Zhou et al.
MRS COMMUNICATIONS (2013)
Stable cycling of double-walled silicon nanotube battery anodes through solid-electrolyte interphase control
Hui Wu et al.
NATURE NANOTECHNOLOGY (2012)
Inexpensive method for producing macroporous silicon particulates (MPSPs) with pyrolyzed polyacrylonitrile for lithium ion batteries
Madhuri Thakur et al.
SCIENTIFIC REPORTS (2012)
Challenges in the development of advanced Li-ion batteries: a review
Vinodkumar Etacheri et al.
ENERGY & ENVIRONMENTAL SCIENCE (2011)
Microstructure Study of Electrochemically Driven LixSi
Seoung-Bum Son et al.
ADVANCED ENERGY MATERIALS (2011)
Challenges for Rechargeable Li Batteries
John B. Goodenough et al.
CHEMISTRY OF MATERIALS (2010)
Spray forming of aluminum alloys and its composites: an overview
K. Raju et al.
JOURNAL OF MATERIALS SCIENCE (2008)
Modification of eutectic silicon in Al-Si alloys
Sathyapal Hegde et al.
JOURNAL OF MATERIALS SCIENCE (2008)
Reversible cycling of crystalline silicon powder
M. N. Obrovac et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)
An in situ X-ray diffraction study of the reaction of Li with crystalline Si
Jing Li et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)
Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cells
Uday Kasavajjula et al.
JOURNAL OF POWER SOURCES (2007)
The influence of the pressure formation at the tip of the melt delivery tube on tin powder size and gas/melt ratio in gas atomization method
Rahmi Unal
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Microstructure selections in the undercooled hypereutectic Al-Si alloys
HS Kang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Structural changes in silicon anodes during lithium insertion/extraction
MN Obrovac et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2004)
An overview of the development of Al-Si-alloy based material for engine applications
HZ Ye
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2003)
The effect of wake-closure phenomenon on gas atomization performance
J Ting et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
分享论文
