☆ 3.8 Article

Impact of PCM type on photocell performance using heat pipe-PCM cooling system: A numerical study

Journal of Energy Systems (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Energy & Fuels

Evaluation of thermal management of photovoltaic solar cell via hybrid cooling system of phase change material inclusion hybrid nanoparticles coupled with flat heat pipe

Ramadan Gad et al.

Summary: This study evaluates the thermal regulation of photovoltaic solar cells using a hybrid cooling system of flat heat pipes (HP) and phase change material (PCM), with and without hybrid nanoparticles. The evaluation is based on energetic, exergetic, economic, and environmental approaches. Results show that the HP-PCM cooling system outperforms natural solar panel cooling and the use of hybrid nanoparticles further enhances its performance. The proposed cooling system achieves significant reductions in operating temperature and improvements in solar panel efficiency compared to conventional systems. Additionally, the hybrid cooling system exhibits higher energy and exergy efficiency, as well as lower production costs, making it more effective and sustainable.

JOURNAL OF ENERGY STORAGE (2023)

添加到收藏夹

Article Thermodynamics

Energy, exergy, economic, and enviroeconomic assessment of a photovoltaic module incorporated with a paraffin-metal foam composite: An experimental study

Mohamed S. Yousef et al.

Summary: The study conducted outdoor experiments and comparative performance evaluations, showing that PV systems incorporated with paraffin wax or paraffin/aluminum foam composite material had improved electrical efficiency in both summer and winter, with reduced electricity generation costs.

ENERGY (2022)

添加到收藏夹

Article Thermodynamics

Experimental investigation on the performance of parallel and staggered arrays of PCM energy storage system for PV thermal regulation

H. A. Nasef et al.

Summary: This experimental study investigated the use of PCM thermal energy storage system to enhance the thermal regulation of a PV system. The performance of charging and discharging cycles varied with different PCM system patterns and flow rates, with the staggered alignment showing the best performance.

ENERGY CONVERSION AND MANAGEMENT (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Year-round energy and exergy performance investigation of a photovoltaic panel coupled with metal foam/phase change material composite

Mohamed Sharaf et al.

Summary: This study evaluates the year-round performance of a photovoltaic system coupled with a phase change material/aluminum metal foam composite as a passive cooling technique. The findings show that this arrangement has the potential to effectively regulate the temperature of PV cells, with the effectiveness of the phase change material being more pronounced in summer. The energy and exergy efficiencies of the PV-PCM/AMF system are improved compared to the conventional PV system. The study emphasizes the importance of selecting the right melting temperature of the phase change material for optimal performance throughout the year.

RENEWABLE ENERGY (2022)

添加到收藏夹

Article Thermodynamics

Energy harvesting in diesel engines to avoid cold start-up using phase change materials

Ahmed Saad Soliman et al.

Summary: This study proposes a new design of exhaust waste heat recovery heat exchanger for preheating the intake air in cold start-up conditions, improving the performance of diesel engines. The results show that the heat exchanger can increase the intake air temperature from 273 K to 302.2 K in less than 1 minute, overcoming the difficulties of cold start-up.

CASE STUDIES IN THERMAL ENGINEERING (2022)

添加到收藏夹

Article Energy & Fuels

Boosting the air conditioning unit performance using phase change material: Impact of system configuration

M. Ismail et al.

Summary: Integrating phase change materials with air conditioning systems can improve AC performance and reduce energy consumption. The study shows that using a cylindrical configuration can enhance the charging efficiency of phase change materials at night and increase energy savings in air conditioning.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Article

Techno-economic assessment of green hydrogen production using different configurations of wind turbines and PV panels

Mohamed NASSER et al.

Journal of Energy Systems (2022)

添加到收藏夹

Article Thermodynamics

A novel heat sink for cooling photovoltaic systems using convex/concave dimples and multiple PCMs

Ahmed Saad Soliman et al.

Summary: A novel design of photovoltaic phase change materials (PV-PCMs) system is established to improve the thermal and electrical performance of solar panels. Numerical analysis and experimental testing were conducted to find the optimal design, which can enhance the operating temperature duration and electrical efficiency of the solar panel.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Energy, exergy, and economic assessment of thermal regulation of PV panel using hybrid heat pipe-phase change material cooling system

Ramadan Gad et al.

Summary: This study investigates the thermal regulation of PV panels using an innovative hybrid cooling system of flat heat pipes (HPs) and phase change material (PCM). The results show that the cooling system significantly enhances the performance of the PV panels, including temperature reduction, improvement in electric efficiency, and system efficiency.

JOURNAL OF CLEANER PRODUCTION (2022)

添加到收藏夹

Article Energy & Fuels

Numerical investigation of a photovoltaic module under different weather conditions

Ahmed Saad Soliman et al.

Summary: This study investigates the thermal and electrical performance of an uncooled polycrystalline concentrated photovoltaic module under different environmental conditions, revealing that the CPV system can safely operate at specific solar concentration ratios, which holds significant practical value.

ENERGY REPORTS (2022)

添加到收藏夹

Article Thermodynamics

PCM assisted heat pipe cooling system for the thermal management of an LTO cell for high-current profiles

Hamidreza Behi et al.

Summary: This paper introduces the concept of a passive thermal management system for electric vehicles and examines the effectiveness of different thermal management techniques through experimental and numerical tests. The results show that heat pipe and PCM assisted heat pipe cooling systems have a significant cooling effect compared to natural convection.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

An experimental work on the performance of solar cell cooled by flat heat pipe

Aly M. A. Soliman et al.

Summary: The experimental study showed that increasing the heat pipe condenser length and decreasing its adiabatic regions led to higher efficiency and output power of the solar cell. However, cell efficiency decreased with higher incident radiation intensity.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

添加到收藏夹

Article Thermodynamics

3D study of convection-radiation heat transfer of electronic chip inside enclosure cooled by heat sink

Hamdy Hassan et al.

Summary: The study focuses on the convection-radiation heat transfer of a discrete heat source cooled by a rectangular finned heat sink inside an enclosure. The numerical and experimental results show good agreement, indicating the importance of radiation in thermal analysis and its impact on chip temperature.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

添加到收藏夹

Article Engineering, Mechanical

3D investigation on the impact of chips positions and number on their cooling inside cavity

Hamdy Hassan et al.

Summary: A 3D transient investigation was conducted to study the cooling of electronic chips inside a cavity enhanced by a finned heat sink, and the impact of chip position and quantity on their cooling efficiency. The study introduced a comprehensive mathematical model solved by a finite difference numerical method, and validated the results through experiments showing good agreement. Findings demonstrated the importance of considering radiation exchange between enclosure walls, optimal chip position for minimal temperature, and the benefits of using multiple chips to decrease flow eddies and chip temperature.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Energy & Fuels

Numerical simulation and experimental verification of constrained melting of phase change material in cylindrical enclosure subjected to a constant heat flux

Ahmed Saad Soliman et al.

Summary: This study experimentally and numerically investigated the melting process of paraffin wax, finding that conduction dominated the early stage of melting while natural convection led to a curved solid-liquid interface and thermal stratification in the upper half of the storage unit. Increasing input power significantly reduced the total melting time, emphasizing the importance of considering convection effects in future modeling of PCM melting processes.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Energy & Fuels

Melting enhancement of nano-phase change material in cylindrical enclosure using convex/concave dimples: Numerical simulation with experimental validation

Ahmed Saad Soliman et al.

Summary: The study found that surface structures like dimples and the addition of nanoparticles can effectively reduce the melting time of PCM, while the charging time decreases with the increase in electric input power.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Energy & Fuels

Improvement of photocells by the integration of phase change materials and thermoelectric generators (PV-PCM-TEG) and study on the ability to generate electricity around the clock

Milad Naderi et al.

Summary: The study aimed to improve power generation and photocell efficiency using phase change material and thermoelectric generator, converting system heat energy into electricity. Numerical simulations showed decreased solar cell temperature, increased electricity output and efficiency, with lower output power at night. Various factors such as packing factor and wind velocity were simulated to optimize system efficiency, with improved efficiency and output power in winter compared to summer.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Thermodynamics

Design of an H2O-LiBr absorption system using PCMs and powered by automotive exhaust gas

Ahmed Saad Soliman et al.

Summary: The main challenge in automobile air conditioning systems using absorption cycles is to efficiently utilize exhaust energy to drive the system at various engine speeds. This study proposes a novel generator design in an absorption system using an H2O-LiBr solution as the working fluid, with multiple types of phase change materials improving heat transfer capability. The results show that at low engine speeds, exhaust energy can effectively drive the system with improved COP values when using multiple types of PCM.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Experimental evaluation of a hybrid photovoltaic and thermal solar energy collector with integrated phase change material (PVT-PCM) in comparison with a traditional photovoltaic (PV) module

Mauricio Carmona et al.

Summary: A novel thermal energy storage and recovery system was proposed to improve the overall efficiency of solar energy collectors by integrating a phase change material in a hybrid module. Experimental comparisons showed that the daily electrical efficiency of the hybrid PVT-PCM module increased by 7.43% compared to the traditional PV module, resulting in a total increase of 20.45% in the capability to extract useful energy from the sun.

RENEWABLE ENERGY (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Performance augmentation of solar photovoltaic panel through PCM integrated natural water circulation cooling technique

P. Sudhakar et al.

Summary: This study investigates the use of phase change material (PCM) and natural water cooling system for effective thermal management of solar photovoltaic (PV) panels. Experimental results showed that the top to bottom continuous water supply cooling technique significantly improved the performance of the PV panel.

RENEWABLE ENERGY (2021)

添加到收藏夹

Article Energy & Fuels

A new approach for employing multiple PCMs in the passive thermal management of photovoltaic modules

Jasim M. Mahdi et al.

Summary: Utilizing multiple PCMs with different melting temperatures for thermal management of photovoltaic modules can significantly increase the thermal management duration and enhance power output. Based on the research findings, employing the arrangement of multiple PCMs can prolong PCM melting time and extend the thermal management time of photovoltaics.

SOLAR ENERGY (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A 3d model of the effect of using heat spreader on the performance of photovoltaic panel (PV)

Aly M. A. Soliman et al.

MATHEMATICS AND COMPUTERS IN SIMULATION (2020)

添加到收藏夹

Article Thermodynamics

Experimental study and exergy analysis of photovoltaic-thermoelectric with flat plate micro-channel heat pipe

Samson Shittu et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

添加到收藏夹

Article Thermodynamics

Novel enhanced conduction model for predicting performance of a PV panel cooled by PCM

Mahmoud B. Elsheniti et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Design and analysis of a concentrating PV/T system with nano fl uid based spectral beam splitter and heat pipe cooling

Xinyue Han et al.

RENEWABLE ENERGY (2020)

添加到收藏夹

Article Energy & Fuels

The effect of using hybrid phase change materials on thermal management of photovoltaic panels - An experimental study

Muhammad Arslan Qasim et al.

SOLAR ENERGY (2020)

添加到收藏夹

Article Thermodynamics

Performance of beeswax phase change material (PCM) and heat pipe as passive battery cooling system for electric vehicles

Nandy Putra et al.

CASE STUDIES IN THERMAL ENGINEERING (2020)

添加到收藏夹

Article Energy & Fuels

Performance evaluation of photovoltaic module integrated with phase change material-filled container with external fins for extremely hot climates

Rajan Kumar et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Article Energy & Fuels

Investigation of the operational performance and efficiency of an alternative PV plus PCM concept

Nikolaos Savvakis et al.

SOLAR ENERGY (2020)

添加到收藏夹

Article Construction & Building Technology

A study on the thermal energy storage of different phase change materials incorporated with the condenser of air-conditioning unit and their effect on the unit performance

M. A. Said et al.

ENERGY AND BUILDINGS (2019)

添加到收藏夹

Proceedings Paper Green & Sustainable Science & Technology

An experimental study of the performance of the solar cell with heat sink cooling system

Aly M. A. Soliman et al.

EMERGING AND RENEWABLE ENERGY: GENERATION AND AUTOMATION (2019)

添加到收藏夹

Article Thermodynamics

Improving the thermal regulation and efficiency enhancement of PCM-Integrated PV modules using nano particles

S. A. Nada et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

添加到收藏夹

Article Energy & Fuels

Thermal management of solar cells using a nano-coated heat pipe plate: an indoor experimental study

Yanping Du et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2017)

添加到收藏夹

Article Thermodynamics

The performance of a heat pipe based solar PV/T roof collector and its potential contribution in district heating applications

H. Jouhara et al.

ENERGY (2017)

添加到收藏夹

Article Thermodynamics

Experimental investigation on the thermal performance of heat pipe-assisted phase change material based battery thermal management system

Weixiong Wu et al.

ENERGY CONVERSION AND MANAGEMENT (2017)

添加到收藏夹

Article Thermodynamics

Heat pipe with nano enhanced-PCM for electronic cooling application

Jogi Krishna et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2017)

添加到收藏夹

Article Thermodynamics

Investigation of PCM-assisted heat pipe for electronic cooling

Hamidreza Behi et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Proceedings Paper Energy & Fuels

Efficiency gains of photovoltaic system using latent heat thermal energy storage

Lippong Tan et al.

1ST INTERNATIONAL CONFERENCE ON ENERGY AND POWER, ICEP2016 (2017)

添加到收藏夹

Article Thermodynamics

Thermal and electrical performances of a water-surface floating PV integrated with double water-saturated MEPCM layers

C. J. Ho et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Thermodynamics

Numerical investigation of heat pipe-based photovoltaic-thermoelectric generator (HP-PV/TEG) hybrid system

Adham Makki et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

添加到收藏夹

Article Green & Sustainable Science & Technology

Optimized design and operation of heat-pipe photovoltaic thermal system with phase change material for thermal storage

A. Sweidan et al.

JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY (2016)

添加到收藏夹

Review Green & Sustainable Science & Technology

Uniform cooling of photovoltaic panels: A review

Haitham M. S. Bahaidarah et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

添加到收藏夹

Article Energy & Fuels

Heat retention of a photovoltaic/thermal collector with PCM

Maria C. Browne et al.

SOLAR ENERGY (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Effect of using nanofluids on the performance of rotating heat pipe

Hamdy Hassan et al.

APPLIED MATHEMATICAL MODELLING (2015)

添加到收藏夹

Article Energy & Fuels

Temperature distribution of photovoltaic module based on finite element simulation

Jicheng Zhou et al.

SOLAR ENERGY (2015)

添加到收藏夹

Article Energy & Fuels

Improving the efficiency of photovoltaic cells using PCM infused graphite and aluminium fins

Peter Atkin et al.

SOLAR ENERGY (2015)

添加到收藏夹

Article Thermodynamics

Annual analysis of heat pipe PV/T systems for domestic hot water and electricity production

Pei Gang et al.

ENERGY CONVERSION AND MANAGEMENT (2012)

添加到收藏夹

Article Energy & Fuels

Heat pipe with PCM for electronic cooling

Ying-Che Weng et al.

APPLIED ENERGY (2011)

添加到收藏夹

Article Construction & Building Technology

A heat pipe photovoltaic/thermal (PV/T) hybrid system and its performance evaluation

Shuang-Ying Wu et al.

ENERGY AND BUILDINGS (2011)

添加到收藏夹

Article Energy & Fuels

A numerical and experimental study on a heat pipe PV/T system

Pei Gang et al.

SOLAR ENERGY (2011)

添加到收藏夹

Article Thermodynamics

Modelling of a double-glass photovoltaic module using finite differences

G Notton et al.

APPLIED THERMAL ENGINEERING (2005)

添加到收藏夹

Article Thermodynamics

Thermal regulation of building-integrated photovoltaics using phase change materials

MJ Huang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2004)

添加到收藏夹

Review Thermodynamics

Review on thermal energy storage with phase change:: materials, heat transfer analysis and applications

B Zalba et al.

APPLIED THERMAL ENGINEERING (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.