Overcoming Chip Shortages: Low-Cost Open-Source Parametric 3-D Printable Solderless SOIC to DIP Breakout Adapters

Article Management

Operational challenges during a pandemic: an investigation in the electronics industry

Sanjoy Kumar Paul et al.

Summary: This study systematically investigates and ranks the operational challenges caused by COVID-19. The findings provide practical implications for practitioners in understanding these challenges and formulating long-term strategies.

INTERNATIONAL JOURNAL OF LOGISTICS MANAGEMENT (2023)

添加到收藏夹

Article Zoology

Open Hardware in Science: The Benefits of Open Electronics

Michael Oellermann et al.

Summary: Open electronics, as a type of openly shared low-cost electronic hardware applications, have the potential to advance scientific research. They can benefit individual researchers by increasing experiment customization, efficiency, and scalability, while improving data quality and quantity. They can also benefit scientific institutions by improving access to customizable high-end technologies, sustainability, visibility, and interdisciplinary collaboration potential. Additionally, open electronics can benefit the scientific community by enhancing transparency, reproducibility, innovation, and collaboration among researchers and the public.

INTEGRATIVE AND COMPARATIVE BIOLOGY (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Overcoming supply disruptions during pandemics by utilizing found hardware for open source gentle ventilation

S. Oberloier et al.

Summary: This article details the design of an open source emergency gentle ventilator framework that can be used in periods of scarcity. The system utilizes commonly-available components and basic electronics skills to achieve the desired performance. The gentle vent generates a calibrated pressure wave to support patient's breathing, and each permutation of the vent is validated using a DIY manometer and open source VentMon. The rudimentary implementation costs less than $40.

HARDWAREX (2022)

添加到收藏夹

Article Management

Disruption in global supply chain and socio-economic shocks: a lesson from COVID-19 for sustainable production and consumption

Zhang Yu et al.

Summary: The novel COVID-19 has emerged as a severe threat to global health globally, affecting over 210 countries and regions. The outbreak of COVID-19 has exacerbated human misery due to the crippling of economies globally. Nearly every country is trying to prevent the transmission of this communicable disease. Remedial policies include testing and treating patients, isolating suspects through contact tracking, banning public gatherings, and asserting a complete or partial shutdown. The study aims to investigate the impact of the COVID-19 pandemic on the environment and energy market, society, economy, and global protective measures taken to reduce COVID-19 transmission.

OPERATIONS MANAGEMENT RESEARCH (2022)

添加到收藏夹

Editorial Material Computer Science, Hardware & Architecture

Impact of COVID-19 on the Consumer Electronics Market

Tom Coughlin

IEEE CONSUMER ELECTRONICS MAGAZINE (2021)

添加到收藏夹

Article Radiology, Nuclear Medicine & Medical Imaging

Quantitative Fit Tested N95 Respirator-Alternatives Generated With CT Imaging and 3D Printing: A Response to Potential Shortages During the COVID-19 Pandemic

David H. Ballard et al.

Summary: The study aimed to design a 3D-printed alternative N95 respirator that passed OSHA-certified quantitative fit testing. Two out of ten prototypes designed with flexible materials passed fit testing, showing potential for use after comprehensive evaluation.

ACADEMIC RADIOLOGY (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Use of 3D printing in production of personal protective equipment (PPE)-a review

JM. Jafferson et al.

Summary: 3D printing technology can help improve the production efficiency of personal protective equipment (PPE), maintain industrial production levels, and mitigate the risk of infection. Currently, there is a sharp increase in global demand for PPE, which is crucial for preventing infection and ensuring life safety.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

LUCIA: An open source device for disinfection of N95 masks using UV-C radiation

Marcel Bentancor et al.

Summary: A device utilizing UV-C light for disinfection of N95 masks was developed, showing effectiveness in reducing viral load at low cost and with simple construction.

HARDWAREX (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Modified full-face snorkel mask as COVID-19 personal protective equipment: Quantitative results

Kyle Nicholson et al.

Summary: The COVID-19 crisis has led to a shortage of PPE. Adapting full-faced snorkel masks as an alternative to fill the gap in PPE has the advantage of providing eye and face protection as well as high quality air filtration. Testing showed that a specific design met OSHA full-facepiece respirator standards.

HARDWAREX (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Infrared thermometer on the wall (iThermowall): An open source and 3-D print infrared thermometer for fever screening

Tomy Abuzairi et al.

Summary: In this study, an infrared thermometer on the wall (iThermowall) was introduced for fever screening in public areas without an operator. Temperature measurement validation of the iThermowall was conducted using T-test analysis, showing similar performance to a reference thermometer. The study provides open-source 3-D printable firmware for developing and under-resourced communities.

HARDWAREX (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

COVENT-Tester: A low-cost, open source ventilator tester

Tomy Abuzairi et al.

Summary: The COVENT-Tester is a low-cost and open-source ventilator tester designed to calibrate the output of medical ventilators, including tidal volume, inspiratory pressure, and oxygen concentration. It was created to assist the open-source community in rapidly manufacturing pandemic ventilators and has shown good measurement accuracy in validation results.

HARDWAREX (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

VentMon: An open source inline ventilator tester and monitor

Robert L. Read et al.

Summary: Humanitarian engineers responded to the ventilator shortage in March 2020 by initiating over 100 open source ventilator projects. One of the resulting devices, VentMon, is a modular, open source, IoT-enabled tester that can be used to test various ventilators.

HARDWAREX (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

3D printing of nasopharyngeal swabs for COVID-19 diagnose: Past and current trends

Aluri Manoj et al.

Summary: The current advancements in emerging 3D printing technologies have been beneficial in various industries like automobile, aerospace, clothing, pharma, and biomedical by creating tailored end-user products. 3D printing has also played a crucial role in supporting healthcare and emergency responses during the COVID-19 pandemic. The interest in 3D printed Nasopharyngeal (NP) swabs has increased due to the shortage of diagnostic testing kits, leading to the employment of different 3D printing technologies.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Health Care Sciences & Services

Vulnerability of the medical product supply chain: the wake-up call of COVID-19

Fiona A. Miller et al.

BMJ QUALITY & SAFETY (2021)

添加到收藏夹

Article Biochemistry & Molecular Biology

Leveraging open hardware to alleviate the burden of COVID-19 on global health systems

Andre Maia Chagas et al.

PLOS BIOLOGY (2020)

添加到收藏夹

Article Engineering, Manufacturing

Mechanical Properties of Direct Waste Printing of Polylactic Acid with Universal Pellets Extruder: Comparison to Fused Filament Fabrication on Open-Source Desktop Three-Dimensional Printers

Arthur Alexandre et al.

3D PRINTING AND ADDITIVE MANUFACTURING (2020)

添加到收藏夹

Editorial Material Nanoscience & Nanotechnology

Low-tech solutions for the COVID-19 supply chain crisis

Andrea M. Armani et al.

NATURE REVIEWS MATERIALS (2020)

添加到收藏夹

Letter Radiology, Nuclear Medicine & Medical Imaging

3D Printed Face Shields: A Community Response to the COVID-19 Global Pandemic

Sarah T. Flanagan et al.

ACADEMIC RADIOLOGY (2020)

添加到收藏夹

Review Green & Sustainable Science & Technology

Plastic recycling in additive manufacturing: A systematic literature review and opportunities for the circular economy

Fabio A. Cruz Sanchez et al.

JOURNAL OF CLEANER PRODUCTION (2020)

添加到收藏夹

Article Public, Environmental & Occupational Health

At the Epicenter of COVID-19-the Tragic Failure of the Global Supply Chain for Medical Supplies

Sonu Bhaskar et al.

FRONTIERS IN PUBLIC HEALTH (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Parametric nasopharyngeal swab for sampling COVID-19 and other respiratory viruses: Open source design, SLA 3-D printing and UV curing system

Nicole Gallup et al.

HARDWAREX (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Conversion of self-contained breathing apparatus mask to open source powered air-purifying particulate respirator for fire fighter COVID-19 response

Benjamin R. Hubbard et al.

HARDWAREX (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Open source high-temperature RepRap for 3-D printing heat-sterilizable PPE and other applications

Noah G. Skrzypczak et al.

HARDWAREX (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Polylactic acid as a suitable material for 3D printing of protective masks in times of COVID-19 pandemic

Eva Vankova et al.

PEERJ (2020)

添加到收藏夹

Article Health Care Sciences & Services

Quadrupling the N95 Supply during the COVID-19 Crisis with an Innovative 3D-Printed Mask Adaptor

Annabel M. Imbrie-Moore et al.

HEALTHCARE (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

High-Fidelity Conformal Printing of 3D Liquid Alloy Circuits for Soft Electronics

Shuo Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Engineering, Environmental

Tightening the loop on the circular economy: Coupled distributed recycling and manufacturing with recyclebot and RepRap 3-D printing

Shan Zhong et al.

RESOURCES CONSERVATION AND RECYCLING (2018)

添加到收藏夹

Article Biochemistry & Molecular Biology

Haves and have nots must find a better way: The case for open scientific hardware

Andre Maia Chagas

PLOS BIOLOGY (2018)

添加到收藏夹

Article Engineering, Electrical & Electronic

RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament

Aubrey L. Woern et al.

HARDWAREX (2018)

添加到收藏夹

Article Optics

Fabrication of 10 μm-scale conductive Cu patterns by selective laser sintering of Cu complex ink

Hyungsuk Min et al.

OPTICS AND LASER TECHNOLOGY (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Electrically conductive filament for 3D-printed circuits and sensors

Sen Wai Kwok et al.

APPLIED MATERIALS TODAY (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fabrication of highly conductive graphene flexible circuits by 3D printing

Di Zhang et al.

SYNTHETIC METALS (2016)

添加到收藏夹

Article Engineering, Electrical & Electronic

High-Efficiency Solar-Powered 3-D Printers for Sustainable Development

Jephias Gwamuri et al.

MACHINES (2016)

添加到收藏夹

Editorial Material Biochemistry & Molecular Biology

Open Labware: 3-D Printing Your Own Lab Equipment

Tom Baden et al.

PLOS BIOLOGY (2015)

添加到收藏夹

Article Biophysics

Ultra-Portable Solar-Powered 3D Printers for Onsite Manufacturing of Medical Resources

Julielynn Y. Wong

AEROSPACE MEDICINE AND HUMAN PERFORMANCE (2015)

添加到收藏夹

Article Engineering, Manufacturing

3D Printing and Humanity's First Imperfect Replicator

Adrian Bowyer

3D PRINTING AND ADDITIVE MANUFACTURING (2014)

添加到收藏夹

Article Automation & Control Systems

Life-cycle economic analysis of distributed manufacturing with open-source 3-D printers

B. T. Wittbrodt et al.

MECHATRONICS (2013)

添加到收藏夹

Article Engineering, Mechanical

Integrating stereolithography and direct print technologies for 3D structural electronics fabrication

Amit Joe Lopes et al.

RAPID PROTOTYPING JOURNAL (2012)

添加到收藏夹

Article Robotics

RepRap - the replicating rapid prototyper

Rhys Jones et al.

ROBOTICA (2011)

添加到收藏夹

Article Engineering, Industrial

Rapid prototyping of electrically conductive components using 3D printing technology

J. Czyzewski et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)

添加到收藏夹

Overcoming Chip Shortages: Low-Cost Open-Source Parametric 3-D Printable Solderless SOIC to DIP Breakout Adapters

相关参考文献

导出引文

分享论文