☆ 4.1 Review

Advances in Strategic Inhibition of Polysulfide Shuttle in Room-Temperature Sodium-Sulfur Batteries via Electrode and Interface Engineering

BATTERIES-BASEL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Covalently Grafting Sulfur-Containing Polymers to Carbon Nanotubes Enhances the Electrochemical Performance of Sulfur Cathodes

Yulin Wang et al.

Summary: This study proposes a method of covalently grafting sulfur-containing polymers to carbon nanotubes as a solution to the problems associated with sulfur cathodes in Li-S batteries. The resulting composite material effectively establishes a porous network and facilitates electron transport, suppressing the shuttle effect of polysulfides. Compared to cells prepared from elemental sulfur, the devices containing the composite material exhibit improved specific capacity and suppressed capacity fading rate.

ACS APPLIED POLYMER MATERIALS (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Advances in the Development of Single-Atom Catalysts for High-Energy-Density Lithium-Sulfur Batteries

Ziwei Liang et al.

Summary: The practical applications of lithium-sulfur batteries face limitations due to issues like lithium dendrite growth and polysulfide shuttling, but these hurdles can be mitigated by using single-atom catalysts (SACs) to enhance electrode materials performance. This review systematically summarizes recent progress in SACs for Li-metal anodes, S cathodes, and separators, highlighting their potential to improve energy-storage devices.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Engineering, Environmental

V2O3-decorated carbon nanofibers as a robust interlayer for long-lived, high-performance, room-temperature sodium-sulfur batteries

Rakesh Saroha et al.

Summary: A new interlayer material has been developed to improve the performance of room temperature sodium-sulfur batteries. This material inhibits the shuttling of sodium polysulfides, improves active material utilization, and accelerates reaction kinetics. Compared to conventional batteries, it exhibits higher rate performance and capacity retention.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Inhibited shuttle effect by functional separator for room-temperature sodium-sulfur batteries

Chunwei Dong et al.

Summary: According to statistics, approximately 6 trillion cigarettes are smoked each year worldwide, resulting in around 1.2 million tons of discarded cigarette butts. This study utilizes nitrogen and sulfur co-doped carbon nanofiber/carbon black (N,S-CNF/CB) composite derived from the discarded cigarette filters to modify glass fiber (GF) separator for the first time, aiming to transform waste into wealth and reduce environmental pollution. The experiment demonstrates that a RT-Na/S battery with a N,S-CNF/CB+GF separator exhibits excellent cycling stability and rate performance.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Energy & Fuels

Formulating energy density for designing practical lithium-sulfur batteries

Guangmin Zhou et al.

Summary: The authors analyze key Li-S cell parameters, propose an energy density calculation, and discuss the design targets for practical high-performance Li-S batteries.

NATURE ENERGY (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Role of Catalytic Materials on Conversion of Sulfur Species for Room Temperature Sodium-Sulfur Battery

Zhenzhen Yang et al.

Summary: This review summarizes research progress on catalytic materials in room temperature Na-S batteries, focusing on the factors influencing the conversion of sulfur species and the roles of various catalytic materials in promoting reaction kinetics. The interaction between polysulfides and sulfur host materials is key to exploring the catalytic mechanism, with the challenges and outlooks towards efficient catalytic material design discussed.

ENERGY & ENVIRONMENTAL MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Porous Heteroatom-Doped Ti3C2Tx MXene Microspheres Enable Strong Adsorption of Sodium Polysulfides for Long-Life Room-Temperature Sodium-Sulfur Batteries

Weizhai Bao et al.

Summary: The study presents a design strategy using Ti3C2Tx MXene for encapsulation of sodium polysulfides to enhance the performance of sodium-sulfur batteries, demonstrating outstanding electrochemical performances with high reversible capacity and extended cycling stability.

ACS NANO (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Computational Auxiliary for the Progress of Sodium-Ion Solid-State Electrolytes

Kaishuai Yang et al.

Summary: This review focuses on the advanced computational methods and ion migration mechanisms of solid-state electrolytes for sodium batteries. It also covers recent progress on various types of solid sodium-ion conductors and outlines current challenges and future opportunities. Additionally, it highlights the importance of computational studies in accelerating research progress of high-performance sodium-ion solid-state electrolytes.

ACS NANO (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

An Efficient Strategy toward Multichambered Carbon Nanoboxes with Multiple Spatial Confinement for Advanced Sodium-Sulfur Batteries

Dongjun Li et al.

Summary: The study presents a facile and efficient strategy for the controllable synthesis of N/O-doped multichambered carbon nanoboxes (MCCBs) by selective etching and stepwise carbonization of ZIF-8 nano-cubes. The multichambered structure of MCCBs as a sulfur host demonstrates better spatial encapsulation, integrated conductivity, high cycle stability, and enhanced rate performance in room-temperature sodium-sulfur batteries.

ACS NANO (2021)

添加到收藏夹

Article Engineering, Environmental

Enhanced reversible capacity of sulfurized polyacrylonitrile cathode for room-temperature Na/S batteries by electrochemical activation

Huihun Kim et al.

Summary: The research identified the reaction mechanism of sulfurized polyacrylonitrile (SPAN) cathode and achieved high reversible capacity through electrochemical activation, providing new strategies for the development of room-temperature Na/S batteries.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Chemistry, Physical

Surface Redox-Active Organosulfur-Tethered Carbon Nanotubes for High Power and Long Cyclability of Na-Organosulfur Hybrid Energy Storage

Milan Jana et al.

Summary: This study demonstrated high power and long cyclability of Na-organosulfur hybrid energy storage devices by coupling the redox-active organosulfur moiety with carbon nanotube networks. The device exhibited excellent reversibility and surface redox kinetics, retaining a high capacitance even at high current densities. Na-organosulfur hybrid full cells showed ultrahigh power density and high energy density over a large number of cycles.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Chemistry, Physical

Sodium-Sulfur Batteries Enabled by a Protected Inorganic/Organic Hybrid Solid Electrolyte

Yuxun Ren et al.

Summary: In this study, an in situ cross-linking reaction was used to embed sodium thioantimonate in a protective polymer host, forming a flexible hybrid electrolyte film. This hybrid solid electrolyte successfully protected the sodium metal and enabled the stable operation of a sodium-sulfur battery.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Chemistry, Physical

Frontiers for Room-Temperature Sodium-Sulfur Batteries

Shipeng Zhang et al.

Summary: Room-temperature sodium-sulfur (Na-S) systems have emerged as a promising technology in new battery technologies beyond the lithium-ion battery era. This Perspective discusses the fundamental challenges, optimization strategies, and correlation between components and electrochemistry for improved performance. Highlighted pivotal research directions provide fundamental guidelines for the practical application of RT Na-S systems.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Enabling a Stable Room-Temperature Sodium-Sulfur Battery Cathode by Building Heterostructures in Multichannel Carbon Fibers

Xin Ye et al.

Summary: This study presents a highly stable room-temperature sodium-sulfur battery cathode material constructed with heterostructures in carbon fibers. The cathode exhibits high capacity and high Coulombic efficiency at low rates, and maintains good cyclic stability even at high rates.

ACS NANO (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Stable Dendrite-Free Sodium-Sulfur Batteries Enabled by a Localized High-Concentration Electrolyte

Jiarui He et al.

Summary: Ambient-temperature sodium-sulfur batteries offer a sustainable and low-cost alternative to lithium-ion batteries with their high specific energy, but face challenges like Na polysulfide shuttling, Na loss, and dendrite formation. By tweaking the solvation structure of the electrolyte, a solid electrolyte interphase rich in inorganic components can be achieved, leading to improved battery performance.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Realizing High-Performance Li/Na-Ion Half/Full Batteries via the Synergistic Coupling of Nano-Iron Sulfide and S-doped Graphene

Anupriya K. Haridas et al.

Summary: A new type of composite material was developed as a high-capacity anode material for lithium/sodium-ion batteries, which enhances electronic conductivity, Li+/Na+ diffusion kinetics, and accommodates volume changes in FeS through the rational coupling of in situ generated FeS nanocrystals and S-doped rGO aerogel matrix. The anode system exhibited excellent long-term cyclability under 5 A g(-1), retaining high reversible capacities for Li+ and Na+ storage.

CHEMSUSCHEM (2021)

添加到收藏夹

Review Chemistry, Physical

Room-Temperature Sodium-Sulfur Batteries and Beyond: Realizing Practical High Energy Systems through Anode, Cathode, and Electrolyte Engineering

Alex Yong Sheng Eng et al.

Summary: Sodium-sulfur batteries offer a promising solution for energy storage systems with rigorous requirements, such as cost-effectiveness and high storage capacities. Key challenges include improving the anode-electrolyte interface engineering and focusing on core principles guiding use-inspired design of cathode architectures, from elemental sulfur and polysulfide cathodes to emerging host structures.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

MOF-Derived CoS2/N-Doped Carbon Composite to Induce Short-Chain Sulfur Molecule Generation for Enhanced Sodium-Sulfur Battery Performance

Fengping Xiao et al.

Summary: The generation of short-chain sulfur in larger pores and the synergistic catalytic effect of CoS2 can prevent the formation of soluble polysulfides during the sodiation process, leading to superior electrochemical properties of the composite materials in Na-S batteries.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Engineering, Environmental

Designing dual-defending system based on catalytic and kinetic iron Pyrite@C hybrid fibers for long-life room-temperature sodium-sulfur batteries

Hongmei Wang et al.

Summary: By utilizing a dual-polysulfide-defending system and hierarchical polar electrodes, the RT-Na/S battery achieves superior performance and long-term stability.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Chemistry, Physical

Origin of shuttle-free sulfurized polyacrylonitrile in lithium-sulfur batteries

Chen-Jui Huang et al.

Summary: By utilizing in-situ Raman and in-situ X-ray absorption spectroscopies, along with density functional theory calculations, the fundamental reaction mechanism of sulfurized polyacrylonitrile (S-cPAN) cathode material in lithium-sulfur batteries is unveiled. The formation of sulfur-nitrogen bonds and their strong interactions during the synthesis process are proposed, providing a new perspective on sulfur chemistry and paving the way for designing high capacity, shuttle-free cathode materials for next-generation Li-S batteries.

JOURNAL OF POWER SOURCES (2021)

添加到收藏夹

Article Chemistry, Physical

Sub-zero and room-temperature sodium-sulfur battery cell operations: A rational current collector, catalyst and sulphur-host design and study

Ajit Kumar et al.

Summary: In this study, indium tin oxide nanoparticles decorated activated carbon cloth were used as an electrocatalytic substrate to reduce polysulfide-shuttling in room-temperature sodium-sulfur batteries, leading to improved performance and cycling stability. Additionally, subzero-temperature sodium-sulfur battery operation was successfully demonstrated for the first time.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

A Monolithic Solid-State Sodium-Sulfur Battery with Al-Doped Na3.4Zr2(Si0.8P0.2O4)(3) Electrolyte

Liang Lu et al.

Summary: The study shows that AI doping can significantly improve the ionic conductivity of Na3.4Zr2(Si0.8P0.2O4)(3), and a solid-state sodium-sulfur battery with a monolithic structure is proposed to tackle interfacial resistance issues.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Manipulating the Electronic Structure of Nickel via Alloying with Iron: Toward High-Kinetics Sulfur Cathode for Na-S Batteries

Lifeng Wang et al.

Summary: Through density functional theory calculations, the study reveals that alloying Fe into Ni can optimize the electronic structure and enhance the efficiency of polysulfide conversion. The designed sulfur host FeNi3@HC shows excellent cycling stability and rate performance, showcasing an effective electrocatalyst design strategy for RT Na-S batteries.

ACS NANO (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Architecting Freestanding Sulfur Cathodes for Superior Room-Temperature Na-S Batteries

Huiling Yang et al.

Summary: In this study, it is demonstrated that a chain-mail catalyst Co@PCNFs can activate sulfur and improve the reaction kinetics in room-temperature sodium-sulfur batteries. The freestanding sulfur cathode constructed with Co@PCNFs achieves high reversible capacity and superior rate capability. This is attributed to efficient electron transfer between the polysulfides and Na2S enabled by the Co@PCNFs, enhancing sulfur redox reactions.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tunable Nitrogen-Doping of Sulfur Host Nanostructures for Stable and Shuttle-Free Room-Temperature Sodium-Sulfur Batteries

Alex Yong Sheng Eng et al.

Summary: This study investigates the impact of nitrogen-doping on the performance of sodium-sulfur batteries, finding that highly doped nitrogen-doped nanocarbon host, despite its lower conductivity, exhibits better Coulombic efficiency and stability, retaining a high capacity after 800 cycles. This suggests that nitrogen-doping should be prioritized in designing shuttle-free, long-life sodium-sulfur batteries.

NANO LETTERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Flower-Like Interlayer-Expanded MoS2-x Nanosheets Confined in Hollow Carbon Spheres with High-Efficiency Electrocatalysis Sites for Advanced Sodium-Sulfur Battery

Sainan Luo et al.

Summary: By introducing sulfur vacancies in MoS2, the study enhances polysulfide adsorption and catalytic ability, and designs MoS2-x/C composite spheres to improve the cycle stability and rate capability of RT-Na/S batteries. This defect- and interlayer-engineering strategy may have wide applications in synthesizing high-performance electrode materials for RT-Na/S batteries.

SMALL (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Atomically dispersed S-Fe-N4 for fast kinetics sodium-sulfur batteries via a dual function mechanism

Bin-Wei Zhang et al.

Summary: This study presents an atomic-level strategy for developing sulfur hosts by dispersing single-atom Fe sites anchored on a nitrogen-doped carbon matrix, enhancing sulfur reactivity and inhibiting the shuttle effect.

CELL REPORTS PHYSICAL SCIENCE (2021)

添加到收藏夹

Review Chemistry, Physical

Sulfurized polyacrylonitrile for high-performance lithium sulfur batteries: advances and prospects

Xiaohui Zhao et al.

Summary: Lithium sulfur (Li-S) batteries have high theoretical specific capacity and energy density, while sulfurized polyacrylonitrile (SPAN) is known for completely eradicating the shuttle of lithium polysulfides and having good compatibility with carbonate-based electrolytes and manufacturing processes. Research on SPAN has focused on its chemical structure, redox reaction, and electrochemical performance over the past few decades.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Boosting electrochemical kinetics of S cathodes for room temperature Na/S batteries

Fan Jin et al.

Summary: Room temperature (RT) Na/S battery system is considered as one of the best energy storage systems due to its low cost and high energy density, but it still faces issues such as shuttle effect and low conversion efficiency. Various strategies have been adopted to enhance the electrochemical kinetics of S cathodes in RT-Na/S batteries, aiming to accelerate the redox process and mitigate the shuttle effect.

MATTER (2021)

添加到收藏夹

Article Chemistry, Physical

Enabling high-performance room-temperature sodium/sulfur batteries with few-layer 2H-MoSe2 embellished nitrogen-doped hollow carbon spheres as polysulfide barriers

Chunwei Dong et al.

Summary: This study presents a functional separator to suppress the shuttle effect in Room-temperature sodium/sulfur batteries, demonstrating a promising path for high-performance RT-Na/S batteries.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

添加到收藏夹

Article Engineering, Environmental

Rational construction of rGO/VO2 nanoflowers as sulfur multifunctional hosts for room temperature Na-S batteries

Wenyan Du et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Chemistry, Physical

Enhanced electrochemical performance of all-solid-state sodium-sulfur batteries by PEO-NaCF3SO3-MIL-53(Al) solid electrolyte

Zhi Ge et al.

IONICS (2020)

添加到收藏夹

Article Chemistry, Physical

Core-Shell Cathode Design with Molybdenum Trioxide as the Electrocatalytic Trapping Layer for High-Energy Density Room-Temperature Sodium Sulfur Batteries

Ajay Piriya Vijaya Kumar Saroja et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2020)

添加到收藏夹

Article Chemistry, Physical

Sodium Sulfide Cathodes Superseding Hard Carbon Pre-sodiation for the Production and Operation of Sodium-Sulfur Batteries at Room Temperature

Luise Maria Bloi et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Electrocatalyzing S Cathodes via Multisulfiphilic Sites for Superior Room-Temperature Sodium-Sulfur Batteries

Hanwen Liu et al.

ACS NANO (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Nickel Hollow Spheres Concatenated by Nitrogen-Doped Carbon Fibers for Enhancing Electrochemical Kinetics of Sodium-Sulfur Batteries

Bingshu Guo et al.

ADVANCED SCIENCE (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Metal Cation-Assisted Synthesis of Amorphous B, N Co-Doped Carbon Nanotubes for Superior Sodium Storage

Ning Fu et al.

SMALL (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ultrastable Sodium-Sulfur Batteries without Polysulfides Formation Using Slit Ultramicropore Carbon Carrier

Qiubo Guo et al.

ADVANCED SCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

An in Situ Prepared Covalent Sulfur-Carbon Composite Electrode for High-Performance Room-Temperature Sodium-Sulfur Batteries

Jie Yan et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Article Chemistry, Physical

Free-Radical Catalysis and Enhancement of the Redox Kinetics for Room-Temperature Sodium-Sulfur Batteries

Ajit Kumar et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Article Electrochemistry

All-solid-state sodium-sulfur battery showing full capacity with activated carbon MSP20-sulfur-Na3SbS4 composite

Taka Ando et al.

ELECTROCHEMISTRY COMMUNICATIONS (2020)

添加到收藏夹

Article Thermodynamics

Approaching energy-dense and cost-effective lithium-sulfur batteries: From materials chemistry and price considerations

Chen Yang et al.

ENERGY (2020)

添加到收藏夹

Article Chemistry, Physical

An artificial metal-alloy interphase for high-rate and long-life sodium-sulfur batteries

Vipin Kumar et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Bio-inspired Nanoscaled Electronic/Ionic Conduction Networks for Room-Temperature All-Solid-State Sodium-Sulfur Battery

Hongli Wan et al.

NANO TODAY (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Self-Formed Electronic/Ionic Conductive Fe3S4 (R) S (R) 0.9Na3SbS4.0.1NaI Composite for High-Performance Room-Temperature All-Solid-State Sodium-Sulfur Battery

Hongli Wan et al.

SMALL (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Mesoporous Nitrogen-Doped Carbon Nanospheres as Sulfur Matrix and a Novel Chelate-Modified Separator for High-Performance Room-Temperature Na-S Batteries

Huan Li et al.

SMALL (2020)

添加到收藏夹

Review Chemistry, Physical

Recent progress on MOF-derived carbon materials for energy storage

Jincan Ren et al.

CARBON ENERGY (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Biphasic Interphase Design Enabling High Performance in Room Temperature Sodium-Sulfur Batteries

Vipin Kumar et al.

CELL REPORTS PHYSICAL SCIENCE (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Rational design of two-dimensional nanomaterials for lithium-sulfur batteries

Milan Jana et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

添加到收藏夹

Review Chemistry, Physical

Cathode materials for lithium-sulfur batteries based on sulfur covalently bound to a polymeric backbone

Radha Mukkabla et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-performance room-temperature sodium-sulfur battery enabled by electrocatalytic sodium polysulfides full conversion

Nana Wang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Facile-Processed Nanocarbon-Promoted Sulfur Cathode for Highly Stable Sodium-Sulfur Batteries

Xiaofei Hu et al.

CELL REPORTS PHYSICAL SCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

Triglyme-based electrolyte for sodium-ion and sodium-sulfur batteries

Daniele Di Lecce et al.

IONICS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Strong Surface Bonding of Polysulfides by Teflonized Carbon Matrix for Enhanced Performance in Room Temperature Sodium-Sulfur Battery

Ajay Piriya Vijaya Kumar Saroja et al.

ADVANCED MATERIALS INTERFACES (2019)

添加到收藏夹

Article Electrochemistry

Trimethyl Phosphate for Nonflammable Carbonate-Based Electrolytes for Safer Room-Temperature Sodium-Sulfur Batteries

Xiao-Min Zhao et al.

CHEMELECTROCHEM (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Improving Polysulfides Adsorption and Redox Kinetics by the Co4N Nanoparticle/N-Doped Carbon Composites for Lithium-Sulfur Batteries

Kuikui Xiao et al.

SMALL (2019)

添加到收藏夹

Article Energy & Fuels

Dielectric and electrochemical studies on carbonate free Na-ion conducting electrolytes for sodium-sulfur batteries

Deepak Kumar et al.

JOURNAL OF ENERGY STORAGE (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Boosting Performance of Na-S Batteries Using Sulfur-Doped Ti3C2Tx MXene Nanosheets with a Strong Affinity to Sodium Polysulfides

Weizhai Bao et al.

ACS NANO (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Sulfide-Based Solid-State Electrolytes: Synthesis, Stability, and Potential for All-Solid-State Batteries

Qing Zhang et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Review Chemistry, Physical

Quasi-solid-state electrolytes for lithium sulfur batteries: Advances and perspectives

Xabier Judez et al.

JOURNAL OF POWER SOURCES (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Nickel sulfide nanocrystals on nitrogen-doped porous carbon nanotubes with high-efficiency electrocatalysis for room-temperature sodium-sulfur batteries

Zichao Yan et al.

NATURE COMMUNICATIONS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Repelling Polysulfides Using White Graphite Introduced Polymer Membrane as a Shielding Layer in Ambient Temperature Sodium Sulfur Battery

Ajay Piriya Vijaya Kumar Saroja et al.

ADVANCED MATERIALS INTERFACES (2019)

添加到收藏夹

Article Chemistry, Physical

MOFs-derived nitrogen-doped carbon interwoven with carbon nanotubes for high sulfur content lithium-sulfur batteries

Maru Dessie Walle et al.

APPLIED SURFACE SCIENCE (2019)

添加到收藏夹

Article Chemistry, Analytical

Fluoroethylene carbonate as an additive in a carbonates-based electrolyte for enhancing the specific capacity of room-temperature sodium-sulfur cell

Xiao-min Zhao et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Three-Dimensionally Reinforced Freestanding Cathode for High Energy Room-Temperature Sodium-Sulfur Batteries

Arnab Ghosh et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Physical

Non-flammable electrolyte for dendrite-free sodium-sulfur battery

Junxiong Wu et al.

ENERGY STORAGE MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

High-energy density room temperature sodium-sulfur battery enabled by sodium polysulfide catholyte and carbon cloth current collector decorated with MnO2 nanoarrays

Ajit Kumar et al.

ENERGY STORAGE MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Effect of eutectic accelerator in selenium-doped sulfurized polyacrylonitrile for high performance room temperature sodium-sulfur batteries

Lihui Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Iodine-doped sulfurized polyacrylonitrile with enhanced electrochemical performance for room-temperature sodium/potassium sulfur batteries

Shaobo Ma et al.

CHEMICAL COMMUNICATIONS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Sodium-Sulfur Batteries with a Polymer-Coated NASICON-type Sodium-Ion Solid Electrolyte

Xingwen Yu et al.

MATTER (2019)

添加到收藏夹

Article Chemistry, Physical

Designing room temperature sodium sulfur batteries with long cycle-life at pouch cell level

Jonas Pampel et al.

ENERGY STORAGE MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

High Performance Room Temperature Sodium-Sulfur Battery by Eutectic Acceleration in Tellurium-Doped Sulfurized Polyacrylonitrile

Shuping Li et al.

ACS APPLIED ENERGY MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Untying thioether bond structures enabled by voltage-scissors for stable room temperature sodium-sulfur batteries

Kejun Chen et al.

NANOSCALE (2019)

添加到收藏夹

Article Chemistry, Physical

Highly cross-linked carbon sponge enables room-temperature long-life semi-liquid Na/polysulfide battery

Ju Sun et al.

MATERIALS TODAY ENERGY (2019)

添加到收藏夹

Article Chemistry, Physical

Rational design of free-standing 3D porous MXene/rGO hybrid aerogels as polysulfide reservoirs for high-energy lithium-sulfur batteries

Jianjun Song et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Physical

An All-Solid-State Sodium-Sulfur Battery Using a Sulfur/Carbonized Polyacrylonitrile Composite Cathode

Tiancheng Zhu et al.

ACS APPLIED ENERGY MATERIALS (2019)

添加到收藏夹

Review Chemistry, Physical

Gel Polymer Electrolytes for Electrochemical Energy Storage

Xunliang Cheng et al.

ADVANCED ENERGY MATERIALS (2018)

添加到收藏夹

Review Energy & Fuels

Status and challenges in enabling the lithium metal electrode for high-energy and low-cost rechargeable batteries

Paul Albertus et al.

NATURE ENERGY (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Efficient Encapsulation of Small S2-4 Molecules in MOF-Derived Flowerlike Nitrogen-Doped Microporous Carbon Nanosheets for High-Performance Li-S Batteries

Xu-Jia Hong et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Self-Assembling Hollow Carbon Nanobeads into Double-Shell Microspheres as a Hierarchical Sulfur Host for Sustainable Room-Temperature Sodium Sulfur Batteries

Lei Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-Performance All-Solid-State Na-S Battery Enabled by Casting-Annealing Technology

Xiulin Fan et al.

ACS NANO (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

30 Years of Lithium-Ion Batteries

Matthew Li et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Stable Quasi-Solid-State Sodium-Sulfur Battery

Dong Zhou et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

添加到收藏夹

Article Chemistry, Physical

Ultrahigh level nitrogen/sulfur co-doped carbon as high performance anode materials for lithium-ion batteries

Zhaozheng Qiu et al.

CARBON (2018)

添加到收藏夹

Article Chemistry, Physical

Remedies of capacity fading in room-temperature sodium-sulfur batteries

Y. X. Ren et al.

JOURNAL OF POWER SOURCES (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Suppressing the Polysulfide Shuttle Effect by Heteroatom-Doping for High-Performance Lithium-Sulfur Batteries

Manfang Chen et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Lithium-Sulfur Batteries: Metal-Organic Frameworks (MOFs)-Derived Nitrogen-Doped Porous Carbon Anchored on Graphene with Multifunctional Effects for Lithium-Sulfur Batteries (Adv. Funct. Mater. 38/2018)

Ke Chen et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

A room-temperature sodium-sulfur battery with high capacity and stable cycling performance

Xiaofu Xu et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Atomic cobalt as an efficient electrocatalyst in sulfur cathodes for superior room-temperature sodium-sulfur batteries

Bin-Wei Zhang et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Chemistry, Physical

Solution-derived glass-ceramic NaI center dot Na3SbS4 superionic conductors for all-solid-state Na-ion batteries

Kern Ho Park et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

添加到收藏夹

Review Chemistry, Physical

Heteroatom-doped carbon materials and their composites as electrocatalysts for CO2 reduction

Huijuan Cui et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

添加到收藏夹

Review Chemistry, Physical

Recent advances in effective protection of sodium metal anode

Linlin Fan et al.

NANO ENERGY (2018)

添加到收藏夹

Article Chemistry, Physical

Single platinum atoms immobilized on an MXene as an efficient catalyst for the hydrogen evolution reaction

Jinqiang Zhang et al.

NATURE CATALYSIS (2018)

添加到收藏夹

Article Chemistry, Physical

Carbon hollow nanobubbles on porous carbon nanofibers: An ideal host for high-performance sodium-sulfur batteries and hydrogen storage

Guanglin Xia et al.

ENERGY STORAGE MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Ultrathin Surface Coating Enables the Stable Sodium Metal Anode

Wei Luo et al.

ADVANCED ENERGY MATERIALS (2017)

添加到收藏夹

Article Chemistry, Physical

Investigation of the Effect of Using Al2O3-Nafion Barrier on Room-Temperature Na-S Batteries

Elif Ceylan Cengiz et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Inorganic-Organic Coating via Molecular Layer Deposition Enables Long Life Sodium Metal Anode

Yang Zhao et al.

NANO LETTERS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Sugar-Derived Room-Temperature Sodium Sulfur Battery with Long Term Cycling Stability

Rachel Carter et al.

NANO LETTERS (2017)

添加到收藏夹

Article Chemistry, Physical

Characterization of sulfur nanocomposite electrodes containing phosphorus sulfide for high-capacity all-solid-state Na/S batteries

Naoto Tanibata et al.

SOLID STATE IONICS (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Self-supporting sulfur cathodes enabled by two-dimensional carbon yolk-shell nanosheets for high-energy-density lithium-sulfur batteries

Fei Pei et al.

NATURE COMMUNICATIONS (2017)

添加到收藏夹

Review Chemistry, Physical

Room-Temperature Sodium-Sulfur Batteries: A Comprehensive Review on Research Progress and Cell Chemistry

Yun-Xiao Wang et al.

ADVANCED ENERGY MATERIALS (2017)

添加到收藏夹

Review Chemistry, Physical

Review on High-Loading and High-Energy Lithium-Sulfur Batteries

Hong-Jie Peng et al.

ADVANCED ENERGY MATERIALS (2017)

添加到收藏夹

Article Chemistry, Physical

Sulfur Copolymer: A New Cathode Structure for Room-Temperature Sodium-Sulfur Batteries

Arnab Ghosh et al.

ACS ENERGY LETTERS (2017)

添加到收藏夹

Article Chemistry, Physical

Easily Accessible, Textile Fiber-Based Sulfurized Poly(acrylonitrile) as Li/S Cathode Material: Correlating Electrochemical Performance with Morphology and Structure

Martin Frey et al.

ACS ENERGY LETTERS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Nitrogen-Doped Graphene Nanosheets/S Composites as Cathode in Room-Temperature Sodium-Sulfur Batteries

Yong Hao et al.

CHEMISTRYSELECT (2017)

添加到收藏夹

Article Energy & Fuels

Ultra-high-rate pseudocapacitive energy storage in two-dimensional transition metal carbides

Maria R. Lukatskaya et al.

NATURE ENERGY (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Heteroatom-Doped Carbon Materials for Electrocatalysis

Tewodros Asefa et al.

CHEMISTRY-A EUROPEAN JOURNAL (2017)

添加到收藏夹

Article Chemistry, Physical

Freestanding carbon fiber cloth/sulfur composites for flexible room-temperature sodium-sulfur batteries

Qiongqiong Lu et al.

ENERGY STORAGE MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Superior Stable and Long Life Sodium Metal Anodes Achieved by Atomic Layer Deposition

Yang Zhao et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-Performance All-Inorganic Solid-State Sodium-Sulfur Battery

Jie Yue et al.

ACS NANO (2017)

添加到收藏夹

Article Chemistry, Physical

Performance Enhancement and Mechanistic Studies of Room-Temperature Sodium-Sulfur Batteries with a Carbon-Coated Functional Nafion Separator and a Na2S/Activated Carbon Nanofiber Cathode

Xingwen Yu et al.

CHEMISTRY OF MATERIALS (2016)

添加到收藏夹

Article Electrochemistry

A Novel One-dimensional Reduced Graphene Oxide/Sulfur Nanoscroll Material and its Application in Lithium Sulfur Batteries

Pengjian Zuo et al.

ELECTROCHIMICA ACTA (2016)

添加到收藏夹

Article Chemistry, Physical

A singular flexible cathode for room temperature sodium/sulfur battery

Icpyo Kim et al.

JOURNAL OF POWER SOURCES (2016)

添加到收藏夹

Article Chemistry, Physical

A room temperature Na/S battery using a beta '' alumina solid electrolyte separator, tetraethylene glycol dimethyl ether electrolyte, and a S/C composite cathode

Icpyo Kim et al.

JOURNAL OF POWER SOURCES (2016)

添加到收藏夹

Article Chemistry, Physical

Tunable porous structure of metal organic framework derived carbon and the application in lithium-sulfur batteries

Xia Li et al.

JOURNAL OF POWER SOURCES (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Achieving High-Performance Room-Temperature Sodium Sulfur Batteries With S@Interconnected Mesoporous Carbon Hollow Nanospheres

Yun-Xiao Wang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

添加到收藏夹

Article Electrochemistry

Sodium Polysulfides during Charge/Discharge of the Room-Temperature Na/S Battery Using TEGDME Electrolyte

Icpyo Kim et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Design Principles for Heteroatom-Doped Nanocarbon to Achieve Strong Anchoring of Polysulfides for Lithium-Sulfur Batteries

Ting-Zheng Hou et al.

SMALL (2016)

添加到收藏夹

Article Multidisciplinary Sciences

A stable room-temperature sodium-sulfur battery

Shuya Wei et al.

NATURE COMMUNICATIONS (2016)

添加到收藏夹

Article Chemistry, Physical

Hard Carbon Anodes and Novel Electrolytes for Long-Cycle-Life Room Temperature Sodium-Sulfur Full Cell Batteries

M. Kohl et al.

ADVANCED ENERGY MATERIALS (2016)

添加到收藏夹

Article Chemistry, Physical

A nitrogen doped carbonized metal-organic framework for high stability room temperature sodium-sulfur batteries

Yu-Ming Chen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

添加到收藏夹

Article Chemistry, Physical

Covalent sulfur for advanced room temperature sodium-sulfur batteries

Ling Fan et al.

NANO ENERGY (2016)

添加到收藏夹

Article Multidisciplinary Sciences

A Na+ Superionic Conductor for Room-Temperature Sodium Batteries

Shufeng Song et al.

SCIENTIFIC REPORTS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Na2S-Carbon Nanotube Fabric Electrodes for Room-Temperature Sodium-Sulfur Batteries

Xingwen Yu et al.

CHEMISTRY-A EUROPEAN JOURNAL (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ambient Temperature Sodium-Sulfur Batteries

Arumugam Manthiram et al.

SMALL (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Synthesis of three-dimensionally interconnected sulfur-rich polymers for cathode materials of high-rate lithium-sulfur batteries

Hoon Kim et al.

NATURE COMMUNICATIONS (2015)

添加到收藏夹

Article Chemistry, Physical

Ambient-Temperature Sodium-Sulfur Batteries with a Sodiated Nafion Membrane and a Carbon Nanofiber-Activated Carbon Composite Electrode

Xingwen Yu et al.

ADVANCED ENERGY MATERIALS (2015)

添加到收藏夹

Article Chemistry, Physical

Free-standing and binder-free highly N-doped carbon/sulfur cathodes with tailorable loading for high-areal-capacity lithium-sulfur batteries

A. Schneider et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

添加到收藏夹

Article Chemistry, Physical

Three-dimensional CNT/graphene-sulfur hybrid sponges with high sulfur loading as superior-capacity cathodes for lithium-sulfur batteries

Jiarui He et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Highly Reversible Room-Temperature Sodium Metal Anode

Zhi Wei Seh et al.

ACS CENTRAL SCIENCE (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

A High-Energy Room-Temperature Sodium-Sulfur Battery

Sen Xin et al.

ADVANCED MATERIALS (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Shuttle suppression in room temperature sodium-sulfur batteries using ion selective polymer membranes

I. Bauer et al.

CHEMICAL COMMUNICATIONS (2014)

添加到收藏夹

Review Chemistry, Multidisciplinary

Rechargeable Lithium-Sulfur Batteries

Arumugam Manthiram et al.

CHEMICAL REVIEWS (2014)

添加到收藏夹

Review Chemistry, Multidisciplinary

Hierarchically porous carbon derived from polymers and biomass: effect of interconnected pores on energy applications

Saikat Dutta et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

添加到收藏夹

Article Chemistry, Physical

Highly Reversible Room-Temperature Sulfur/Long-Chain Sodium Polysulfide Batteries

Xingwen Yu et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Nitrogen doped porous carbon fibres as anode materials for sodium ion batteries with excellent rate performance

Lijun Fu et al.

NANOSCALE (2014)

添加到收藏夹

Article Chemistry, Physical

Nano-Copper-Assisted Immobilization of Sulfur in High-Surface-Area Mesoporous Carbon Cathodes for Room Temperature Na-S Batteries

Shiyou Zheng et al.

ADVANCED ENERGY MATERIALS (2014)

添加到收藏夹

Article Electrochemistry

Capacity Enhancement and Discharge Mechanisms of Room-Temperature Sodium-Sulfur Batteries

Xingwen Yu et al.

CHEMELECTROCHEM (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

One-Dimensional Carbon-Sulfur Composite Fibers for Na-S Rechargeable Batteries Operating at Room Temperature

Tae Hoon Hwang et al.

NANO LETTERS (2013)

添加到收藏夹

Article Multidisciplinary Sciences

A strategic approach to recharging lithium-sulphur batteries for long cycle life

Yu-Sheng Su et al.

NATURE COMMUNICATIONS (2013)

添加到收藏夹

Article Chemistry, Physical

Alternative materials for sodium ion-sulphur batteries

Dong-Ju Lee et al.

JOURNAL OF MATERIALS CHEMISTRY A (2013)

添加到收藏夹

Review Chemistry, Physical

Li-O2 and Li-S batteries with high energy storage

Peter G. Bruce et al.

NATURE MATERIALS (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

Two-Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2

Michael Naguib et al.

ADVANCED MATERIALS (2011)

添加到收藏夹

Article Chemistry, Physical

Discharge reaction mechanism of room-temperature sodium-sulfur battery with tetra ethylene glycol dimethyl ether liquid electrolyte

Hosuk Ryu et al.

JOURNAL OF POWER SOURCES (2011)

添加到收藏夹

Review Multidisciplinary Sciences

Electrical Energy Storage for the Grid: A Battery of Choices

Bruce Dunn et al.

SCIENCE (2011)

添加到收藏夹

Article Chemistry, Physical

Studies on poly(vinylidene fluoride-co-hexafluoropropylene) based gel electrolyte nanocomposite for sodium-sulfur batteries

Deepak Kumar et al.

SOLID STATE IONICS (2011)

添加到收藏夹

Article Chemistry, Physical

Ionic liquid based sodium ion conducting gel polymer electrolytes

Deepak Kumar et al.

SOLID STATE IONICS (2010)

添加到收藏夹

Article Electrochemistry

The short-term cycling properties of Na/PVdF/S battery at ambient temperature

Jong-Seon Kim et al.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2008)

添加到收藏夹

Article Chemistry, Physical

Research on sodium sulfur battery for energy storage

Zhaoyin Wen et al.

SOLID STATE IONICS (2008)

添加到收藏夹

Article Chemistry, Physical

Discharge properties of all-solid sodium-sulfur battery using poly (ethylene oxide) electrolyte

Cheol-Wan Park et al.

JOURNAL OF POWER SOURCES (2007)

添加到收藏夹

Article Electrochemistry

Room temperature Na/S batteries with sulfur composite cathode materials

Jiulin Wang et al.

ELECTROCHEMISTRY COMMUNICATIONS (2007)

添加到收藏夹

Article Electrochemistry

Room-temperature solid-state sodium/sulfur battery

CW Park et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2006)

添加到收藏夹

Article Electrochemistry

The lithium/sulfur rechargeable cell - Effects of electrode composition and solvent on cell performance

J Shim et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.