A Polyacrylonitrile Shutdown Film for Prevention of Thermal Runaway in Lithium-Ion Cells

The electrodeposition of a polymer (polyacrylonitrile, PAN) is used to reduce the risk of thermal runaway in lithium-ion batteries, which is the most important cause of battery accidents and fires. PAN was electrodeposited on a graphite battery electrode, using cyclic voltammetry or chronoamperometry, in a solution with acrylonitrile as the solvent. The electrodeposited PAN film was characterised by Raman spectroscopy, microscopy, energy dispersive X-ray analysis, and thermogravimetric analysis, and it was found that the film thickness could be controlled by the amount of charge passed in the electrochemical experiments. The PAN-coated graphite battery electrode was then tested in lithium half-cells, obtaining capacities close to the uncoated graphite sample (ca. 360 mA h g (-1)) for thin (<10 mu m) polymer coatings at 25 degrees C. Interestingly, for thicker polymer coatings (>20 mu m) it was found that the capacity decreased drastically as the temperature increased beyond 80 degrees C. Such suppression in capacity has applications for thermal runaway protection since the electrochemical reactions of degradation of the electrolyte in contact with the electrode are the root cause of the thermal runaway process. Further work should look into alternative polymer and liquid electrolyte formulations to achieve the desired suppression of electrochemical capacity at high temperatures while retaining high capacities at the operational temperature range.

Automated summary

The electrodeposition of PAN is used to reduce thermal runaway in lithium-ion batteries. The PAN-coated graphite electrode showed controlled film thickness and achieved capacities close to uncoated graphite at 25 degrees C. However, thicker polymer coatings resulted in a drastic decrease in capacity beyond 80 degrees C, indicating potential applications for thermal runaway protection.