Improved electrodeposition of CdS layers in presence of activating H2SeO3 microadditive

CdS thin films were deposited electrochemically onto indium tin oxide (ITO)/glass substrates from aqueous solutions containing 0.01 M CdCl2, 0.05 M Na2S2O3 and 0.02 M Edta-Na-2 at -1.2 mV versus saturated sulfate reference electrode. Depositions were carried out at various temperatures (20, 50 and 80 degrees C) and different pH (2.5, 3.5 and 4.5) in a three electrode electrochemical cell. All above mentioned electrochemical syntheses were reproduced in presence of H2SeO3 microadditive to compare resulted CdS layers. Electrodeposited CdS thin films were characterized by different instrumental techniques to know the influence of deposition conditions on the quality of the obtained layers. It was found that the presence of 0.05-0.5 mM of H2SeO3 in the electrolyte changes the mechanism of the CdS film formation that facilitates nucleation and a growth of a more dense and uniform polycrystalline CdS film. Addition of 0.5 mM of H2SeO3 into the initial solution allowed us to obtain nearly stoichiometric (sulfur content similar to 52 ate) CdS films at reduced temperature value of 50 degrees C vs. higher temperature values used in a conventional electrodeposition process of CdS layers. No Se-containing phases were detected by EDX, Raman and XRD analyses in the CdS films. The presence of H2SeO3 tends to rearrange polytype crystalline structure of CdS to more stable hexagonal structure. The band gap value of CdS was increased from 2.3 eV to 2.5 eV as a result of H2SeO3 addition. (C) 2016 Elsevier Ltd. All rights reserved.