相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Prediction of dynamic mechanical behaviors of coral concrete under different corrosive environments and its enhancement mechanism
Jingjie Wei et al.
JOURNAL OF BUILDING ENGINEERING (2023)
Preparation, characterization and application of environment-friendly high density and low damage solid free completion fluids for completing HTHP oil and gas wells
Jinhua Huo et al.
GEOENERGY SCIENCE AND ENGINEERING (2023)
Dynamical properties of environmental high-performance composites with calcined clay
Jingjie Wei et al.
JOURNAL OF CLEANER PRODUCTION (2022)
Reducing the emission of climate-altering substances in cementitious materials: A comparison between alkali-activated materials and Portland cement-based composites incorporating recycled tire rubber
Marco Valente et al.
JOURNAL OF CLEANER PRODUCTION (2022)
Design, dynamic performance and ecological efficiency of fiber-reinforced mortars with different binder systems: Ordinary Portland cement, limestone calcined clay cement and alkali-activated slag
Wu-Jian Long et al.
JOURNAL OF CLEANER PRODUCTION (2022)
Fiber-reinforced alkali-activated concrete: A review
Mugahed Amran et al.
JOURNAL OF BUILDING ENGINEERING (2022)
Simplified analytical model to assess key factors influenced by fiber alignment and their effect on tensile performance of UHPC
Le Teng et al.
CEMENT & CONCRETE COMPOSITES (2022)
A scientometric review on mechanical and durability performance of geopolymer Paste: Effect of various raw materials
Ali Raza et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Effect of mixing method on the performance of alkali-activated fly ash/slag pastes along with polycarboxylate admixture
Yazan Alrefaei et al.
CEMENT & CONCRETE COMPOSITES (2021)
Effect of phosphonate addition on sodium carbonate activated slag properties
Artur Kiiashko et al.
CEMENT & CONCRETE COMPOSITES (2021)
Recent advances in chemical admixtures for improving the workability of alkali-activated slag-based material systems
Su Tong et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Reinforcement mechanism of orientally distributed steel fibers on ultra-high-performance concrete
Hongxiang Gou et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Prediction of fiber orientation and flexural performance of UHPC based on suspending mortar rheology and casting method
Le Teng et al.
CEMENT & CONCRETE COMPOSITES (2021)
Fiber alignment and its effect on mechanical properties of UHPC: An overview
Huanghuang Huang et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Strength and durability of fiber reinforced concrete with partial replacement of cement by Ground Granulated Blast Furnace Slag
P. K. Prasanna et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Effect of alkali contents, moduli and curing time on engineering properties of alkali activated slag
Shuai Fang et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Improvement of flexural and tensile strength of layered-casting UHPC with aligned steel fibers
Yang Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Rheology control of ultra-high-performance concrete made with different fiber contents
Le Teng et al.
CEMENT AND CONCRETE RESEARCH (2020)
Effect of silicate modulus of water glass on the hydration of alkali-activated converter steel slag
Jianwei Sun et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)
Damping additives used in cement-matrix composites: A review
Lin Chi et al.
COMPOSITES PART B-ENGINEERING (2019)
A novel specific requirements for materials used in reinforced concrete composites subjected to dynamic loads
Grzegorz Ludwik Golewski
COMPOSITE STRUCTURES (2019)
Effect of retarders on flow and strength development of alkali-activated fly ash/blast furnace slag composite
Kenta Sasaki et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Geopolymer, green alkali activated cementitious material: Synthesis, applications and challenges
Yanguang Wu et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Combined effects of steel fiber and coarse aggregate size on the compressive and flexural toughness of high-strength concrete
Seok-Joon Jang et al.
COMPOSITE STRUCTURES (2018)
Dynamic mechanical analysis of cement mortar prepared with recycled cathode ray tube (CRT) glass as fine aggregate
Tiejun Liu et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Improvement effect of steel fiber orientation control on mechanical performance of UHPC
Huanghuang Huang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Effect of Graphene Oxide on the Damping Capability of Recycled Mortar
Jing-Jie Wei et al.
4TH INTERNATIONAL CONFERENCE ON ADVANCED ENGINEERING AND TECHNOLOGY (4TH ICAET) (2018)
Research on dynamic mechanical properties of alkali activated slag concrete under temperature-loads coupling effects
Wu-Jian Long et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Flexural capacity of fiber reinforced concrete with a consideration of concrete strength and fiber content
Jong-Han Lee et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
The damping property of recycled aggregate concrete
Chaofeng Liang et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Cement industry greenhouse gas emissions - management options and abatement cost
Raili Kajaste et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Synthesis, characterization and performance of a novel phosphate modified fluid loss additive useful in oil well cementing
Thomas Hurnaus et al.
JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2016)
Use of graphene oxide nanosheets to regulate the microstructure of hardened cement paste to increase its strength and toughness
Shenghua Lv et al.
CRYSTENGCOMM (2014)
Assessment of CO2 reduction of alkali-activated concrete
Keun-Hyeok Yang et al.
JOURNAL OF CLEANER PRODUCTION (2013)
Application of 1-hydroxyethylidene-1, 1-diphosphonic acid in boiler water for industrial boilers
Bin Zeng et al.
WATER SCIENCE AND TECHNOLOGY (2013)
Chemical and mechanical stability of sodium sulfate activated slag after exposure to elevated temperature
A. M. Rashad et al.
CEMENT AND CONCRETE RESEARCH (2012)
Effect of steel and carbon fiber additions on the dynamic properties of concrete containing silica fume
V. T. Giner et al.
MATERIALS & DESIGN (2012)
High mechanical performance of fibre reinforced cementitious composites: the role of casting-flow induced fibre orientation
Liberato Ferrara et al.
MATERIALS AND STRUCTURES (2011)