4.7 Article

Creep and stress relaxation of a FeMnSi-based shape memory alloy at low temperatures

出版社

ELSEVIER SCIENCE SA
DOI: 10.1016/j.msea.2016.09.042

关键词

Fe-based shape memory alloy; Low temperature creep; Stress relaxation; Martensitic transformation

资金

  1. Swiss National Science Foundation (SNSF) [200021_150109/1]
  2. company re-Fer AG, Wollerau, Switzerland
  3. Swiss National Science Foundation (SNF) [200021_150109] Funding Source: Swiss National Science Foundation (SNF)

向作者/读者索取更多资源

The creep and stress relaxation behavior of a Fe-17Mn-5Si-10Cr-4Ni-1(V,C) (wt%) shape memory alloy at low homologous temperatures (-45 degrees C < T < 50 degrees C) was systematically studied in stress and strain controlled tensile tests. At constant stresses at -45 degrees C, the alloy exhibits pronounced creep up to 0.6% at 600 MPa after only 30 min holding time. If the strain is kept constant, a pronounced stress relaxation of up to 10% of the initial stress was observed. The final creep strains, the creep rates at a constant stress as well as the stress relaxation at a constant strain increase with decreasing temperature. In addition, the change of the recovery stress as a function of time in a restrained sample after 4% elongation and heating to different constant temperatures was monitored. It was observed that the increase of the final recovery stress is more pronounced when the holding temperature is increased. This behavior was explained with the time and temperature dependent formation of stress induced epsilon-martensite from the parent gamma-austenite phase during mechanical loading according to the model of Kajiwara et al. as well as with the increased number of stacking faults at lower temperatures, which serve as nucleation sites for the epsilon-martensite formation. (C) 2016 Elsevier B.V. All rights reserved.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.7
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据