☆ 3.8 Article

Appraisal of hand value of denim fabrics

RESEARCH JOURNAL OF TEXTILE AND APPAREL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Textiles

Effects of weft count and weft density on the surface roughness of 3/1 (Z) twill woven fabric

Kura Alemayehu Beyene et al.

Summary: This study investigates the effects of weft yarn diameter and pick density on the properties of surface roughness of 3/1 (Z) twill-woven fabrics. The findings suggest that weft yarn diameter and pick density have a significant impact on the surface roughness in diagonal and weft directions, but a minimal impact on the warp direction.

RESEARCH JOURNAL OF TEXTILE AND APPAREL (2023)

添加到收藏夹

Article Materials Science, Textiles

Comparative study of linear and quadratic model equations for prediction and evaluation of surface roughness of a plain-woven fabric

Kura Alemayehu Beyene

Summary: Purpose Modeling helps to determine the influence of structural parameters on fabric surface and properties, and this study develops regression models to predict and evaluate surface roughness of plain-woven fabrics. The count and density of the fabric were found to have significant effects on roughness, and the quadratic model equation showed better accuracy and reliability compared to the linear model equation.

RESEARCH JOURNAL OF TEXTILE AND APPAREL (2023)

添加到收藏夹

Article Materials Science, Textiles

The effects of pretreatment on the surface roughness of plain-woven fabric by the Kawabata Evaluation System

Kura Alemayehu Beyene et al.

Summary: This study assessed the relationship between surface roughness of cotton plain-woven fabric before and after pretreatment stages. The findings showed that the roughness values increased after desizing, but reduced during scouring, bleaching, and mercerization. Mercerized fabric had the smoothest surface. The pretreatment stages had significant impacts on the surface roughness.

TEXTILE RESEARCH JOURNAL (2023)

添加到收藏夹

Article Engineering, Manufacturing

Investigating the impact of different machinability processes and fibre architecture on the bearing performance of pin-loaded textile structural composites for automotive applications: Experimental and finite element analysis

Sandeep Olhan et al.

Summary: This study investigates the effect of different machinability processes and fibre architectures on the behavior, strength, and failure mechanism of textile fibre reinforced structural composites (TFRSC) suitable for automotive applications. Basalt fibre reinforced composites exhibited the highest bearing strength, and a mechanics-based approach using finite element modeling was successfully used to predict the bearing response of the composites.

JOURNAL OF MANUFACTURING PROCESSES (2023)

添加到收藏夹

Article Materials Science, Textiles

Optimization of Coating Process Conditions for Denim Fabrics by Taguchi Method and Grey Relational Analysis

Sumeyye Ustuntag et al.

Summary: This study identifies the optimum levels of coating process parameters for cotton/elastane blend denim fabrics to improve tear strength and stiffness properties. The findings show that weft density and fabric passing speed are the most effective parameters for enhancing these properties.

JOURNAL OF NATURAL FIBERS (2022)

添加到收藏夹

Article Materials Science, Textiles

Microstructure and performance characteristics of acoustic insulation materials from post-consumer recycled denim fabrics

Shafiqul Islam et al.

Summary: One of the key issues of the 21st century is reducing environmental pollution caused by waste. The use of recycled materials and environmentally friendly manufacturing methods can help address this issue. Sound pollution, which has been increasing due to industrialization and modernization, can be reduced by using acoustic insulation materials made from recycled textile waste. This study evaluated the recycling of used apparels to produce sustainable products that can be used as acoustic insulation panels.

JOURNAL OF INDUSTRIAL TEXTILES (2022)

添加到收藏夹

Article Materials Science, Textiles

An integrated approach to develop performance index of bed linen fabric

Meenakshi Ahirwar et al.

Summary: The quality of bed sheets is not only determined by thread count, but also by characteristics such as breathability, moisture absorbency, and soft feel. This research aims to develop an objective method to measure the performance behavior of bed linen fabric. The study concludes that a high correlation exists between the subjective and objective performance index, indicating that the performance of bed linens can be accurately estimated using the developed equation.

JOURNAL OF INDUSTRIAL TEXTILES (2022)

添加到收藏夹

Article Materials Science, Textiles

A mathematical model for objective hand evaluation of automotive seat fabrics

Meenakshi Ahirwar et al.

Summary: A mathematical model was developed to objectively evaluate the hand value of car seat fabrics. The model was based on the subjective assessment of fabrics by a panel of judges and identified the primary hand attributes and related mechanical parameters. The study found a strong correlation between subjective and objective hand values.

JOURNAL OF INDUSTRIAL TEXTILES (2022)

添加到收藏夹

Article Materials Science, Textiles

The effects of yarn and fabric structural parameters on surface friction of plain-woven fabrics

Kura Alemayehu Beyene et al.

Summary: The study found that weft yarn count and pick density have statistically significant effects on the frictional behavior of the fabric surface properties, with weft yarn count positively correlated with both coefficient of friction (MIU) and mean deviation of coefficient of friction (MMD), while pick density negatively correlated with both MIU and MMD. There is multicollinearity between weft count, pick density, and their interactions (Count X Density) during the experiment.

RESEARCH JOURNAL OF TEXTILE AND APPAREL (2022)

添加到收藏夹

Review Materials Science, Textiles

Fabric hand research translates senses into numbers - a review

Meenakshi Ahirwar et al.

Summary: Fabric hand is evaluated by the reaction obtained from the sense of touch, and is essential in fabric development and marketing. This review provides a detailed literature on fabric hand dating back to 1930, discussing various aspects of fabric hand research, from definition to prediction methods.

JOURNAL OF THE TEXTILE INSTITUTE (2022)

添加到收藏夹

Article Materials Science, Textiles

Investigation of different denim fabrics with fabric touch tester and sensory evaluation

Esra Akgul et al.

Summary: Denim fabric is a popular textile product worldwide, with comfort properties impacting customer satisfaction and product sales range; the study utilized a new equipment FTT and questionnaire method to investigate different denim fabric properties and interpret comfort perception.

JOURNAL OF NATURAL FIBERS (2022)

添加到收藏夹

Article Materials Science, Textiles

Prediction of Handle Value of Bed Linen Fabrics Using Computational Method

Meenakshi Ahirwar et al.

Summary: A computational method was developed to predict the handle value of bed linen fabrics, which is crucial for improving fabric comfort. Four primary hand properties were selected by experts, and equations were developed to calculate primary and total hand values. The research concluded that total hand value of bed linen fabrics can be predicted with tolerable accuracy level.

JOURNAL OF NATURAL FIBERS (2022)

添加到收藏夹

Article Materials Science, Textiles

Development of hemp-blended cotton fabrics and analysis on handle behavior, low-stress mechanical and aesthetic properties

Meenakshi Ahirwar et al.

Summary: Cotton, a popular natural fiber in the apparel industry, occupies a significant portion of arable land and insecticide market globally. Industrial hemp is considered a sustainable alternative to cotton, but faces challenges in processing due to its coarse fiber and poor spinnability. This study focuses on investigating the properties and value of plain woven hemp-blended cotton fabrics.

JOURNAL OF THE TEXTILE INSTITUTE (2022)

添加到收藏夹

Article Materials Science, Textiles

Effect of ring and rotor spun yarns on denim fabric properties

Abenezer Fikre Hailemariam et al.

Summary: This study investigates the mechanical properties of denim fabrics made from ring-spun and open-end rotor spun yarns. The results show that denim made from ring-spun yarns has better tensile and tear strength, while denim made from open-end rotor yarns has better abrasion resistance, pilling resistance, and air permeability.

RESEARCH JOURNAL OF TEXTILE AND APPAREL (2022)

添加到收藏夹

Article Materials Science, Textiles

Prediction of tear strength of bed sheet fabric using machine learning based artificial neural network

Meenakshi Ahirwar et al.

Summary: A novel algorithm based on machine learning was developed to predict the tear strength of bed sheet fabrics, showing high accuracy and reliability in forecasting fabric performance.

JOURNAL OF THE TEXTILE INSTITUTE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Cleaner Dyeing Technology for Denim Fabrics with Excellent Utilization of Indigo Based on Inert Gas Protection

Kangkang Wang et al.

Summary: This study examined the feasibility of using nitrogen protection to overcome dyeing difficulties in cotton fabrics, and found that the injection of nitrogen improved the stability and quality of indigo dyeing. The eco-friendly dyeing strategy presented in this study significantly enhanced denim production's sustainability.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Textiles

Objective Hand Evaluation of Stretch Fabrics Using Artificial Neural Network and Computational Model

Meenakshi Ahirwar et al.

Summary: This study investigates an approach to predict the total hand value of stretch fabrics using computational and artificial neural network models. The results show that both models can accurately forecast the fabric hand with a high level of accuracy.

JOURNAL OF NATURAL FIBERS (2022)

添加到收藏夹

Article Acoustics

Acoustic behaviour of needle punched nonwoven structures produced from various natural and synthetic fibers

Parikshit Paul et al.

Summary: This research investigates the acoustic properties of needle punched nonwoven fabrics in textiles and finds that different fiber types, fineness, cross-sectional shapes, and fabric areal density have an impact on sound absorption. Hollow conjugated cross sections exhibit the highest noise absorption, while nonwovens made from biodegradable and recyclable materials show good sound absorption properties.

APPLIED ACOUSTICS (2022)

添加到收藏夹

Article Materials Science, Textiles

Tactile Comfort and Low-Stress Mechanical Properties of Half-Bleached Knitted Fabrics Made from Cotton Yarns with Different Parameters

Desalegn Atalie et al.

Summary: This study investigates the effect of cotton yarn parameters on tactile comfort and low-stress mechanical properties of knitted fabrics, finding that yarn count influences properties such as friction coefficient, surface roughness, tensile strength, bending, shear, and compression. Additionally, a correlation was observed between fabric smoothness and yarn count, with an adjusted R-squared value of 83.1%. Equations were used to model the relationship between yarn parameters and tactile comfort properties.

JOURNAL OF NATURAL FIBERS (2021)

添加到收藏夹

Article Materials Science, Textiles

Optimization of Alkaline Degumming Process of Hemp Fibers

Meenakshi Ahirwar et al.

Summary: The study optimized the alkaline degumming process of hemp fibers to minimize strength loss and achieve uniform fiber segregation by removing lignin content. The best-suited alkali degumming method involved heating at 120 degrees C for 45 min using sodium hydroxide, wetting agent, and hydrogen peroxide.

JOURNAL OF NATURAL FIBERS (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Review: Textile-based natural fibre-reinforced polymeric composites in automotive lightweighting

Sandeep Olhan et al.

Summary: This review highlights the advantages and applications of textile fiber-reinforced composites in the automotive industry from an environmental perspective, emphasizing the environmental-friendly characteristics, excellent mechanical properties, and increasing production rate of natural fiber composites.

JOURNAL OF MATERIALS SCIENCE (2021)

添加到收藏夹

Article Materials Science, Textiles

Impact of cotton parameters on sensorial comfort of woven fabrics

Desalegn Atalie et al.

RESEARCH JOURNAL OF TEXTILE AND APPAREL (2020)

添加到收藏夹

Review Materials Science, Textiles

Influence of selected production parameters on the hand of mattress knitted fabrics assessed by the Fabric Touch Tester

Simona Vasile et al.

TEXTILE RESEARCH JOURNAL (2019)

添加到收藏夹

Article Materials Science, Textiles

The effects of elastane and finishing processes on the performance properties of denim fabrics

Selin Hanife Eryuruk

INTERNATIONAL JOURNAL OF CLOTHING SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Textiles

Effect of weft yarn twist level on mechanical and sensorial comfort of 100% woven cotton fabrics

Desalegn Atalie et al.

FASHION AND TEXTILES (2019)

添加到收藏夹

Article Materials Science, Textiles

Relationship Between Physical and Low-stress Mechanical Properties to Fabric Hand of Woollen Fabric with Fusible Interlinings

Qian Zhang et al.

FIBERS AND POLYMERS (2018)

添加到收藏夹

Article Materials Science, Paper & Wood

Green surface modification and nano-multifunctionalization of denim fabric

Nabil A. Ibrahim et al.

CELLULOSE (2018)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

New knitted fabric concepts for denim products

A. Marmarali et al.

17TH WORLD TEXTILE CONFERENCE AUTEX 2017 - SHAPING THE FUTURE OF TEXTILES (2017)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Investigating comfort properties of 3/1 Z twill weaved denim fabrics

E. Tastan Ozkan et al.

17TH WORLD TEXTILE CONFERENCE AUTEX 2017 - SHAPING THE FUTURE OF TEXTILES (2017)

添加到收藏夹

Article Materials Science, Textiles

Subjective evaluation of terry fabrics handle

Galya Dimitrova Kandzhikova et al.

JOURNAL OF THE TEXTILE INSTITUTE (2016)

添加到收藏夹

Article Chemistry, Applied

Effects of biowashing and liquid ammonia treatment on the physical characteristics and hand of denim fabric

In Yeol Lee et al.

COLORATION TECHNOLOGY (2015)

添加到收藏夹

Article Materials Science, Textiles

The effect of washing treatments on the sensory properties of denim fabric

Naima Abdelfattah Halleb et al.

TEXTILE RESEARCH JOURNAL (2015)

添加到收藏夹

Article Materials Science, Textiles

Low Stress Mechanical Properties of Fabrics Woven from Bamboo Viscose Blended Yarns

Abhijit Majumdar et al.

FIBERS AND POLYMERS (2014)

添加到收藏夹

Article Materials Science, Textiles

Objective evaluation of terry fabric hand

J. P. Singh et al.

JOURNAL OF THE TEXTILE INSTITUTE (2014)

添加到收藏夹

Article Materials Science, Textiles

Comparative Study of Cellulase Treatment on Low Stress Mechanical Properties of Cotton Denim Fabric Made by Torque-free Ring Spun Yarn

R. H. Yang et al.

FIBERS AND POLYMERS (2013)

添加到收藏夹

Article Materials Science, Textiles

Objective measurement of fabric appearance using digital image processing

B. K. Behera et al.

JOURNAL OF THE TEXTILE INSTITUTE (2006)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Enhanced production of Trichoderma reesei endoglucanases and use of the new cellulase preparations in producing the stonewashed effect on denim fabric

A Miettinen-Oinonen et al.

APPLIED AND ENVIRONMENTAL MICROBIOLOGY (2002)

添加到收藏夹

Article Materials Science, Textiles

Objective evaluation of the handle of blankets

M Niwa et al.

TEXTILE RESEARCH JOURNAL (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.