4.0 Article

Use of Dregs as a Replacement for Hydrated Lime in Cement Coating Mortar

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Construction & Building Technology

Evaluation of the microstructure and micromechanics properties of structural mortars with addition of iron ore tailings

Bruna Silva Almada et al.

Summary: This study analyzes the effects of four types of iron ore tailings on the microstructure, porosity, and thickness of the interfacial transition zone in structural mortars. The results show that iron ore tailings improve particle packing, reduce the thickness of the interfacial transition zone, and increase the hardness of the matrix.

JOURNAL OF BUILDING ENGINEERING (2023)

Article Construction & Building Technology

Validation of alternative methodologies by using capillarity in the determination of porosity parameters of cement-lime mortars

Markssuel T. Marvila et al.

Summary: This study investigated the capillary mechanisms in mortars and the porosity rate by using different cement-lime mortar compositions. The results showed a direct relationship between certain compositions and Darcy's law, which can be used to determine the percentile of capillary pores in mortars. Lime mortars, however, did not comply with Darcy's law due to their intrinsic properties.

MATERIALS AND STRUCTURES (2022)

Article Construction & Building Technology

Characterization of sustainable mortar containing high-quality recycled manufactured sand crushed from recycled coarse aggregate

Zhiming Ma et al.

Summary: This study proposes an innovative method to crush recycled coarse aggregate into recycled manufactured sand, which can be used to prepare high-quality recycled mortar with high strength and good durability. The recycled manufactured sand has superior properties compared to recycled fine aggregate, and can significantly improve the performance of recycled mortar.

CEMENT & CONCRETE COMPOSITES (2022)

Article Construction & Building Technology

Microstructure and macro properties of sustainable alkali-activated fly ash mortar with various construction waste fines as binder replacement up to 100%

Miao Liu et al.

Summary: Utilizing construction waste fines as an eco-friendly binder for sustainable alkali-activated materials provides a new approach for recycling construction waste. This study investigated the effects of different types and replacement levels of construction waste fines on the properties of alkali-activated fly ash mortar (AAM). The results showed that incorporating waste paste powder containing hydrated products improved the pore structure of AAM, while incorporating waste mortar powder or waste concrete powder with inert quartz and calcite had a negative impact on the alkali-activated reaction and pore structure of AAM. Adjusting the type and replacement level of construction waste fines can achieve sustainable AAM with good mechanical strength and chloride ingress resistance.

CEMENT & CONCRETE COMPOSITES (2022)

Article Construction & Building Technology

Influence of freeze-thaw cycles on the pull-out response of lime-based TRM composites

Ali Dalalbashi et al.

Summary: Textile reinforced mortars (TRMs) have become a sustainable solution for strengthening existing masonry and concrete structures, with most studies focusing on mechanical properties, while durability and long-term performance remain unclear. Experimental study finds that freeze-thaw conditions do not affect mortar strength but can deteriorate fiber-to-mortar bond behavior depending on fiber type, embedded length, and configuration.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Green & Sustainable Science & Technology

Mechanical Performance of Lime Mortar Coatings for Rehabilitation of Masonry Elements in Old and Historical Buildings

Fernando G. Branco et al.

Summary: The study focused on the mechanical performance of lime-based mortars in rehabilitation works for old buildings, finding that mortars with lime putty exhibited better mechanical properties, while those with aerial lime showed better water absorption behavior under pressure. Overall, the studied mortars were found to be suitable for use in the rehabilitation of masonry elements.

SUSTAINABILITY (2021)

Article Green & Sustainable Science & Technology

Technological and environmental comparative of the processing of primary sludge waste from paper industry for mortar

Afonso Rangel Garcez de Azevedo et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Environmental Sciences

Dregs and grits from kraft pulp mills incorporated to Portland cement clinker

Caio Moreira Miquelino Eleto Torres et al.

JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2020)

Review Chemistry, Multidisciplinary

Inorganic Waste Generated in Kraft Pulp Mills: The Transition from Landfill to Industrial Applications

Margarida J. Quina et al.

APPLIED SCIENCES-BASEL (2020)

Article Construction & Building Technology

Effects of zeolite and silica fume substitution on the microstructure and mechanical properties of mortar at high temperatures

Mehrdad Abdi Moghadam et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

The effects of mixture's components on the mechanical properties and durability indicators of mixed mortar using simplex network method

Alessandra Tolentino Souza et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Materials Science, Multidisciplinary

Influence of particle shape and size distribution on coating mortar properties

Lucimar Dias de Oliveira Haddad et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Article Construction & Building Technology

CO2 carbonation-induced improvement in strength and microstructure of reactive MgO-CaO-fly ash-solidified soils

Dongxing Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Green & Sustainable Science & Technology

Green liquor dregs and slaker grits residues characterization of a pulp and paper mill for future application on ceramic products

Veronica Ribeiro dos Santos et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Article Engineering, Environmental

Waste-containing clinkers: Valorization of alternative mineral sources from pulp and paper mills

L. Simao et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2017)

Proceedings Paper Construction & Building Technology

The influence of cement on properties of lime mortars

L. Gulbe et al.

MODERN BUILDING MATERIALS, STRUCTURES AND TECHNIQUES (2017)

Article Green & Sustainable Science & Technology

Moisture damage resistance of hot-mix asphalt made with paper industry wastes as filler

Ana R. Pasandin et al.

JOURNAL OF CLEANER PRODUCTION (2016)

Article Environmental Sciences

Concretes and mortars with waste paper industry: Biomass ash and dregs

Isabel Martinez-Lage et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2016)

Article Engineering, Environmental

Preparation of clinker from paper pulp industry wastes

Leire H. Buruberri et al.

JOURNAL OF HAZARDOUS MATERIALS (2015)

Article Thermodynamics

Low-temperature preparation of belite from lime sludge and nanosilica through solid-state reaction

S. Maheswaran et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2015)

Article Materials Science, Composites

A potential bio-filler: The substitution effect of furfural modified clam shell for carbonate calcium in polypropylene

Mei-sheng Xia et al.

JOURNAL OF COMPOSITE MATERIALS (2015)

Article Construction & Building Technology

Influence of natural hydraulic lime content on the properties of aerial lime-based mortars

B. A. Silva et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Construction & Building Technology

Effects of natural fibres reinforcement in lime plasters (kenaf and sisal vs. Polypropylene)

G. Di Bella et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Construction & Building Technology

Air lime-metakaolin-sepiolite mortars for earth based walls

Slavka Andrejkovicova et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Article Materials Science, Multidisciplinary

Phase and morphology evolution of calcium carbonate precipitated by carbonation of hydrated lime

Ozlem Cizer et al.

JOURNAL OF MATERIALS SCIENCE (2012)