☆ 4.0 Review

An Overview of the Recent Advances in Composite Materials and Artificial Intelligence for Hydrogen Storage Vessels Design

JOURNAL OF COMPOSITES SCIENCE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Energy & Fuels

-Neural network-based optimization of hydrogen fuel production energy system with proton exchange electrolyzer supported nanomaterial

Tao Hai et al.

Summary: In this study, a solar-geothermal energy system is investigated for power production, hydrogen fuel production, and desalination. Machine learning methods are used to optimize the design parameters of the system. The results show improved performance and efficiency.

FUEL (2023)

添加到收藏夹

Review Green & Sustainable Science & Technology

Transforming road freight transportation from fossils to hydrogen: Opportunities and challenges

Sandun Wanniarachchi et al.

Summary: This article critically reviews the existing knowledge on the current status of hydrogen fueling supply chain and explores the potential of integrating hydrogen fuel for road freight transportation. It reveals that transforming freight transportation into low-emission alternative fuels requires a comprehensive multicriteria assessment and identifies decision parameters affecting the optimal fuel selection process.

INTERNATIONAL JOURNAL OF SUSTAINABLE TRANSPORTATION (2023)

添加到收藏夹

Article Materials Science, Composites

Mechanical Homogenization of Transversely Isotropic CNT/GNP Reinforced Biocomposite for Wind Turbine Blades: Numerical and Analytical Study

Amine El Bahi et al.

Summary: This research explores the influence of aspect ratio, volume fraction, and agglomeration of nanofillers on the mechanical properties of a polymer biocomposite containing carbon nanotubes and graphene nanoplatelets. The study finds that agglomeration significantly affects the composite's mechanical properties. The novelty of this work lies in considering different micromechanics approaches and numerical techniques to investigate the factors influencing the elastic properties.

JOURNAL OF COMPOSITES SCIENCE (2023)

添加到收藏夹

Article Engineering, Manufacturing

Hydrogen permeability of thermoplastic composites and liner systems for future mobility applications

Jan Conde-Wolter et al.

Summary: High pressure hydrogen permeation tests were conducted to measure the specific permeation rates of different thermoplastic matrix materials and continuous fiber reinforced thermoplastic composites (PA6, PA12, PA410, PPA, PPS), including non-crimp and crimp textile architectures. The influence of EVOH liners on the permeation rate of PA6 composites was also investigated. Results showed that thermoplastic composites can achieve low permeation rates with a damage-free microstructure. EVOH layers exhibit remarkable barrier properties and can be easily integrated into the composite structure.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2023)

添加到收藏夹

Review Materials Science, Composites

Experiment, simulation, optimization design, and damage detection of composite shell of hydrogen storage vessel-A review

Wenbo Li et al.

Summary: This paper reviews the failures of the composite shell of composite high pressure hydrogen storage vessel (CHPHSV) and discusses experimental research, simulation methods, optimization design, and damage detection. The future research directions are proposed, emphasizing the importance of experiments, simulations, and optimization in the design of composite vessels.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2023)

添加到收藏夹

Article Engineering, Multidisciplinary

Past, present and future prospective of global carbon fibre composite developments and applications

Jin Zhang et al.

Summary: This paper provides a comprehensive review of the history and consumption of carbon fibres and CFRPs, as well as future trends in various industries. Despite a decline in aerospace consumption, there is a projected increase in demand for CFRPs, mainly driven by the wind energy sector. The development of lower cost carbon fibres and manufacturing technologies is also discussed.

COMPOSITES PART B-ENGINEERING (2023)

添加到收藏夹

Article Automation & Control Systems

Data-Driven Design of Electrically Conductive Nanocomposite Materials: A Case Study of Acrylonitrile-Butadiene-Styrene/Carbon Nanotube Binary Composites

Changrok So et al.

Summary: This study demonstrates the use of online literature data to develop an efficient deep learning model for designing ABS/CNT binary composites. The proposed model achieves a 26% lower average mean absolute error and an accuracy of 80.6%, which is 16.2% higher than the traditional model, in predicting the electrical and mechanical properties of ABS/CNT composites. Additionally, a Monte Carlo simulation integrated with the deep neural network model effectively screens input variables and guides users in manufacturing composite products with desired physical properties.

ADVANCED INTELLIGENT SYSTEMS (2023)

添加到收藏夹

Article Materials Science, Composites

Strain rate effects on the thermomechanical behavior of glass/polyester composite joints

Mostapha Tarfaoui et al.

Summary: This study conducted dynamic compression tests on composite joints using the Split Hopkinson Pressure Bars (SHPB) technique, finding that the thickness of the adhesive significantly influences the damage kinetics and its localization. The dynamic behavior of adhesively bonded joints is sensitive to strain rate, loading direction, and temperature increase linked to damage initiation.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Materials Science, Composites

Impact of winding parameters on the fiber bandwidth in the cylindrical area of a hydrogen pressure vessel for generating a digital twin

Christian Hopmann et al.

Summary: The wet winding process is a well-established manufacturing technology for producing rotationally symmetrical components made of fiber-reinforced plastic (FRP). However, traditional simulations neglect manufacturing influences, such as fiber spreading. Therefore, a more realistic description of the deposition process of the fiber band on the winding core can provide a deeper understanding of the process.

POLYMER COMPOSITES (2022)

添加到收藏夹

Review Engineering, Biomedical

COVID-19: Current challenges regarding medical healthcare supplies and their implications on the global additive manufacturing industry

Ibrahim Goda et al.

Summary: The covid-19 outbreak has caused a shortage of masks and healthcare products globally. Additive manufacturing (AM) technology has the potential to provide emergency responses and has been proven effective for large-scale manufacturing. However, standardization, certification, and biocompatibility remain challenges for the adoption of AM in healthcare.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

A novel recursive multi-scale modeling for predicting the burst pressure of filament wound composite pressure vessels

Roham Rafiee et al.

Summary: A novel recursive multi-scale modeling approach is developed to predict the burst pressure in filament wound composite pressure vessels. The modeling considers the micro, meso, and macro scales, and takes into account the imperfections in fiber arrangement. It starts from the micro scale, simulating fiber spacing and contiguity, and progresses to the meso scale to capture the influence of fiber-bundle undulation and crossovers. Finally, it analyzes the stress/strain distribution on each layer at the macro scale.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2022)

添加到收藏夹

Review Engineering, Chemical

Self-Healing Nanofibers for Engineering Applications

Kritika Chaudhary et al.

Summary: Continuous innovation and implementation are required for the development of emerging technologies in various fields to advance civilization. Electrospinning and self-healing materials have attracted increasing attention in recent years, showing great potential for applications in manufacturing, biomedical, textile, aerospace industries, and beyond. These technologies have the ability to mimic biological organisms' healing abilities, automatically repairing damaged parts and enhancing material reinforcement in advanced composites.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Renewable energy and climate change

A. G. Olabi et al.

Summary: This editorial summarized some scientific works presented at the 2018 SEEP conference, which were directly related to the scope of the RSER journal. It focused on the development of renewable energy and its positive effect on climate change, and briefly summarized the accepted manuscripts in this issue.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

添加到收藏夹

Review Engineering, Multidisciplinary

Mechanical and thermal properties of sepiolite strengthened thermoplastic polymer nanocomposites: A comprehensive review

Zahid Iqbal Khan et al.

Summary: Sepiolite is a valuable filler in thermoplastic composites, showing superior properties compared to other fillers. Its strengthening ability and bio-compatibility have stimulated research and investment in nanocomposite materials. The properties of sepiolite-loaded thermoplastic polymer composites depend on various factors like filler content, matrix, interaction with the bond, and size of sepiolite particles. Further development and assessment are necessary to expand its utilization in different applications.

ALEXANDRIA ENGINEERING JOURNAL (2022)

添加到收藏夹

Review Energy & Fuels

Application of Filament Winding Technology in Composite Pressure Vessels and Challenges: A Review

Mohammad Azeem et al.

Summary: This article reviews the application of filament winding technology in gas storage and transportation, discussing the challenges and optimization methods in the design and manufacturing process.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Article Chemistry, Physical

Properties improvement of composite layer of cryo-compressed hydrogen storage vessel by polyethylene glycol modified epoxy resin

Jiaqiao Zhang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

添加到收藏夹

Article Materials Science, Composites

Influence of Moisture Diffusion on the Dynamic Compressive Behavior of Glass/Polyester Composite Joints for Marine Engineering Applications

Oumnia Lagdani et al.

Summary: Thermoset polymers offer excellent mechanical properties for marine engineering applications, with their high strain rate performance under hygrothermal aging being studied. Experimental results showed that the dynamic behavior varies with the variation of strain rate, and buckling and delamination of fibers are the dominant damage criteria observed in in-plane compression tests.

JOURNAL OF COMPOSITES SCIENCE (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Multiscale viscoplastic modeling of recycled glass fiber-reinforced thermoplastic composites: Experimental and numerical investigations

M. Nachtane et al.

Summary: This research aims to investigate the relationship between microstructural parameters and the mechanical properties of a recycled thermoplastic composite material. An innovative approach is proposed to link the local microstructure of the composite to the mechanical behavior of the recycled material. The abilities of the proposed approach are proven by incorporating the viscoplastic behavior of the random heterogeneous material induced by the polymer matrix.

COMPOSITES PART B-ENGINEERING (2022)

添加到收藏夹

Review Energy & Fuels

A Review on Industrial Perspectives and Challenges on Material, Manufacturing, Design and Development of Compressed Hydrogen Storage Tanks for the Transportation Sector

Mariana Pimenta Alves et al.

Summary: Hydrogen fuel cell technology plays a crucial role in the future of advanced mobility and the energy revolution. The feasibility of this technology relies on the development of safe, lightweight, and cost-competitive hydrogen storage solutions. However, the commercialization of hydrogen tanks still faces challenges such as low production rates and high costs. This paper provides insights into the evolving scenario of hydrogen storage solutions in the transportation sector, discussing key issues in tank design and analysis, as well as testing and certification requirements.

ENERGIES (2022)

添加到收藏夹

Article Polymer Science

A Multiscale Study of CFRP Based on Asymptotic Homogenization with Application to Mechanical Analysis of Composite Pressure Vessels

Nan Zhang et al.

Summary: This article establishes a multiscale mechanical model of carbon fiber reinforced polymer (CFRP) using asymptotic homogenization method, and validates its efficiency in calculating material properties and conducting mechanical analysis. This work is of great significance for the multiscale analysis of composite pressure vessels.

POLYMERS (2022)

添加到收藏夹

Review Chemistry, Physical

Permeation barriers for hydrogen embrittlement prevention in metals- A review on mechanisms, materials suitability and efficiency

Nour-Eddine Laadel et al.

Summary: This paper reviews the mechanisms and factors responsible for hydrogen embrittlement phenomenon and considers the main specifications for selecting appropriate materials. Additionally, effective surface modification solutions as permeation barriers to protect structural materials from hydrogen degradation are reviewed.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

添加到收藏夹

Article Chemistry, Physical

Predicting hydrogen storage capacity of V-Ti-Cr-Fe alloy via ensemble machine learning

Ziliang Lu et al.

Summary: This study utilizes the data-driven innovation method of ensemble learning to establish the structure-property relationship of the V-Ti-Cr-Fe alloy and accurately predict its maximum hydrogen absorption capacity. The research findings indicate that valence electron concentration, lattice constant, and Z/r3 play a critical role in the prediction. Furthermore, the genetic algorithm is used to propose three optimal composition ranges, which have been validated experimentally for their accuracy.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

添加到收藏夹

Review Chemistry, Physical

Review on optimization design, failure analysis and non-destructive testing of composite hydrogen storage vessel

Wei Zhou et al.

Summary: This review focuses on the optimization design, failure analysis, and nondestructive testing of composite hydrogen storage vessels, aiming to enhance their safety. It discusses the benefits of optimization design in improving the durability and strength of the vessels, as well as the applications of nondestructive testing techniques in studying their residual performance and damage modes.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

添加到收藏夹

Article Chemistry, Physical

Numerical and Experimental Investigations of the Influence of Operation on the Technical Condition of Pressure Vessels

Przemyslaw Moczko et al.

Summary: This paper introduces a method for assessing the durability of structures based on a real example of a liquid nitrogen spherical tank. The authors analyze macroscopic factors of the material and develop a comprehensive method for structural analysis under complex loads.

MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

The Study of Machine Learning Assisted the Design of Selected Composites Properties

Stella Hrehova et al.

Summary: Industry 5.0 aims to make the industry sustainable by developing circular processes that utilize natural resources efficiently. Machine learning plays a crucial role in determining the optimal ratio of components in composite materials, thus improving resource utilization efficiency.

APPLIED SCIENCES-BASEL (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Hydrogen liquefaction: a review of the fundamental physics, engineering practice and future opportunities

Saif ZS. Al Ghafri et al.

Summary: Hydrogen is an increasingly promising energy carrier in a low-carbon global energy system. Liquid hydrogen is being widely considered for transportation and storage, and it is important to ensure the safety and efficiency of the liquefaction and storage processes for it to be viable. This study provides an overview of the current state of liquid hydrogen technology, including the underlying science and current liquefaction processes, while also discussing the challenges and priorities for next-generation liquid hydrogen technologies and research and development.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

添加到收藏夹

Article Thermodynamics

Parametric optimization of coupled fin-metal foam metal hydride bed towards enhanced hydrogen absorption performance of metal hydride hydrogen storage device

Xiao-Shuai Bai et al.

Summary: This study investigates the coupled fin-metal foam metal hydride reactor using a 3D multi-physical model. The results show that the fin-metal foam reactor has lower thermal resistance and improved charging time and hydrogen absorption performance.

ENERGY (2022)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Recent progress in hydrogen fuelled internal combustion engine (H2ICE) - A comprehensive outlook

Balu Jalindar Shinde et al.

Summary: Worldwide auto giants and research institutes have initiated pilot projects using hydrogen as fuel in various types of vehicle internal combustion engines, leading to a growing interest in finding solutions for zero emission vehicles.

MATERIALS TODAY-PROCEEDINGS (2022)

添加到收藏夹

Review Engineering, Multidisciplinary

Recent advances in catalytic combustion of AP-based composite solid propellants

Narendra Yadav et al.

Summary: Composite solid propellants (CSPs) are widely used for propelling rockets in space and military applications. The burn rate of solid propellants is crucial for designing solid rocket motors to meet specific mission requirements, and it can be tailored by using different constituents and incorporating suitable combustion catalysts. The use of nanoscale catalysts in CSPs has increased recently due to their superior catalytic properties.

DEFENCE TECHNOLOGY (2021)

添加到收藏夹

Article Polymer Science

Rapid prediction and inverse design of distortion behaviors of composite materials using artificial neural networks

Ling Luo et al.

Summary: A data-driven computational methodology integrating FEM and ANN is proposed to rapidly predict maximum PID of asymmetrical laminates and perform high-throughput screening of thermosetting-matrix composites for targeted maximum PID, providing a new approach for material design.

POLYMERS FOR ADVANCED TECHNOLOGIES (2021)

添加到收藏夹

Article Mechanics

Machine learning regression approaches for predicting the ultimate buckling load of variable-stiffness composite cylinders

A. Kaveh et al.

Summary: In this study, various machine learning techniques were employed to establish the relationship between fiber angle and buckling capacity of cylinders under bending-induced loads. The numerical results demonstrate that compared with other models such as Random Forest Regressor, Decision Tree algorithm, and Multiple Linear Regression, the Deep Learning model achieved more stable results with smaller errors and higher generalization.

ACTA MECHANICA (2021)

添加到收藏夹

Article Mechanics

Progressive damage analysis for multiscale modelling of composite pressure vessels based on Puck failure criterion

Song Lin et al.

Summary: This study proposed a method for progressive failure analysis of composite pressure vessels, predicting burst pressure with small difference from experimental results. By combining finite element analysis with acoustic emission detection, the predicted blasting position aligned with actual tests.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Mechanics

Data-driven multiscale simulation of FRP based on material twins

Wei Huang et al.

Summary: This paper introduces a multiscale data-driven framework for FRP composites, which collects material databases and simulates structural behavior through a data-driven approach, leading to significant cost savings and promising applications.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Energy & Fuels

Energy absorption characteristics in hybrid composite materials for marine applications under impact loading: Case of tidal current turbine

Houda Laaouidi et al.

Summary: The tidal current turbine is an efficient way to extract energy from the sea, but can be prone to critical loads. Research shows that the stacking sequence of hybrid nozzles significantly influences damage formation, with CGG stacking offering higher impact resistance.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

添加到收藏夹

Article Chemistry, Physical

Neural network based optimization for cascade filling process of on-board hydrogen tank

Jinsheng Xiao et al.

Summary: A study established an optimization methodology to determine initial thermodynamic conditions for compressed hydrogen storage with minimum energy consumption; training a neural network for predicting optimal filling parameters can effectively reduce energy consumption.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

添加到收藏夹

Article Chemistry, Physical

Expected impacts on greenhouse gas and air pollutant emissions due to a possible transition towards a hydrogen economy in German road transport

Lindsey B. Weger et al.

Summary: The study suggests that transitioning German road transport to hydrogen energy has the potential to significantly reduce emissions, improve air quality, and enhance energy security in the future.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

添加到收藏夹

Article Polymer Science

Identification of voids and interlaminar shear strengths of polymer-matrix composites by optical microscopy experiment and deep learning methodology

Ling Luo et al.

Summary: The study utilized a comprehensive approach combining deep learning algorithm and theoretically driven equation to automatically identify and analyze microscopic voids in composite materials, investigating their relationship with interlaminar shear strength. Experimental results demonstrated that the proposed method can accurately obtain ILSS values for laminates with different void contents.

POLYMERS FOR ADVANCED TECHNOLOGIES (2021)

添加到收藏夹

Article Mechanics

A machine-learning fatigue life prediction approach of additively manufactured metals

Hongyixi Bao et al.

Summary: In this study, the influence of defects on the fatigue life of selective laser melted Ti-6Al-4V alloy was explored using a machine learning method, specifically supported by a support vector machine. Through a combination of high cycle fatigue post mortem examination and synchrotron X-ray tomography, geometric features of critical defects were acquired and trained. The results showed a high coefficient of determination of 0.99 between predicted and experimental fatigue lives, indicating strong training ability of the SVM model.

ENGINEERING FRACTURE MECHANICS (2021)

添加到收藏夹

Review Chemistry, Physical

A review of metallic tanks for H2 storage with a view to application in future green shipping

Zhenzhou Wang et al.

Summary: Increasing environmental legislation requires the marine industry to reduce greenhouse gases, sulphur oxides, and nitrogen oxides emissions. Insights from academic and industrial activities show tangible opportunities for adopting alternative fuels, with hydrogen as a promising option. However, large-scale bunkering of hydrogen on marine platforms poses inherent risks.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

添加到收藏夹

Article Chemistry, Physical

Sensing advancement towards safety assessment of hydrogen fuel cell vehicles

Sahar Foorginezhad et al.

Summary: The study emphasizes the importance of safety considerations when using hydrogen fuel cells, despite their promising advantages as an alternative energy source. Comprehensive review on hydrogen characteristics, sensor types, international collaborations, regulations, and standards are discussed. Future directions are proposed for sensing and monitoring methods in the utilization of hydrogen fuel cells in vehicles.

JOURNAL OF POWER SOURCES (2021)

添加到收藏夹

Review Green & Sustainable Science & Technology

Hydrogen storage technologies for stationary and mobile applications: Review, analysis and perspectives

I. A. Hassan et al.

Summary: Hydrogen storage systems are crucial for a feasible hydrogen economy, with physical and material-based systems such as compressed gas and metal hydrides being discussed. The features and challenges of different storage technologies are explored, and the need for complementary solutions to meet various application needs is highlighted. Recommendations and insights for suitable storage system applications, along with standards and research on storage vessels, are also provided.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

添加到收藏夹

Article Polymer Science

Multi-Objective Optimisation of Curing Cycle of Thick Aramid Fibre/Epoxy Composite Laminates

Guowei Zhang et al.

Summary: This study investigates the optimization of the curing cycle for thick aramid fibre-reinforced epoxy composites using the signal-to-noise ratio (SNR) method. Results indicate that dwelling temperature is the main factor affecting overheating temperature. The optimized curing cycle successfully reduces the overheating temperature.

POLYMERS (2021)

添加到收藏夹

Article Automation & Control Systems

3D printing: rapid manufacturing of a new small-scale tidal turbine blade

Marwane Rouway et al.

Summary: This study investigates the thermomechanical performance of small tidal turbine blades produced using 3D printing technology, finding that PA12-GB has the lowest warpage. The research provides an excellent opportunity for the design and development of tidal energy systems in the future.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Physical

A predictive modeling tool for damage analysis and design of hydrogen storage composite pressure vessels

Ba Nghiep Nguyen et al.

Summary: This paper presents a predictive modeling tool for damage analysis and design of hydrogen (H-2) storage composite pressure vessels, integrating micromechanics and continuum damage mechanics, as well as 3D finite element modeling. The implementation of integrated multi-scale modeling enables damage analysis and design functionalities.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

添加到收藏夹

Article Chemistry, Physical

Fatigue life prediction and verification of high-pressure hydrogen storage vessel

Enqi Wu et al.

Summary: A fatigue life prediction method was developed for high-pressure hydrogen storage vessel based on theoretical research and experimental verification. The study found that fatigue failure first occurred in the middle cylinder, which was consistent with the theoretical analysis results.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

添加到收藏夹

Article Chemistry, Physical

Hydrogen release from a metal hydride tank with phase change material jacket and coiled-tube heat exchanger

Liang Tong et al.

Summary: Hydrogen fuel cells are gaining attention in waterway transportation for developing green ships and reducing greenhouse gas emissions. Metal hydrides are considered for hydrogen storage due to their capacity and safety. This study investigated the heat transfer effects during dehydriding using LaNi5 hydride as the storage material in a reactor.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

添加到收藏夹

Review Green & Sustainable Science & Technology

Hydrogen energy systems: A critical review of technologies, applications, trends and challenges

Meiling Yue et al.

Summary: This paper reviews the current progress and outlook of hydrogen technologies and their application in power systems, highlighting the importance of hydrogen in clean energy and pointing out the technical and economic challenges that need to be addressed.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

添加到收藏夹

Article Mechanics

Finite Element Analysis of Impact-Induced Damage in Pressurized Hybrid Composites Pipes

Ammar Maziz et al.

Summary: This study investigates the damage initiation and evolution of filament wound hybrid composite pipes under low-velocity impact, revealing that damage mainly occurs through matrix cracking and discussing the evolution of damage in tension, compression, and shear in detail.

INTERNATIONAL JOURNAL OF APPLIED MECHANICS (2021)

添加到收藏夹

Review Polymer Science

Recent Trends and Developments in Conducting Polymer Nanocomposites for Multifunctional Applications

Shubham Sharma et al.

Summary: This paper introduces electrically-conducting polymers and their applications in polymer nanocomposites. By combining organic electronics with design engineering, efforts are being made to enhance and modify the performance of devices in various fields such as sensors, solar cells, and biomedical applications.

POLYMERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Validation of Selected Optical Methods for Assessing Polyethylene (PE) Liners Used in High Pressure Vessels for Hydrogen Storage

Pawel Gasior et al.

Summary: This study proposes a non-destructive evaluation method for PE liners in high-pressure composite vessels, as well as three optical detection methods. The aim is to detect liner defects during the manufacturing process to prevent the entire vessel from being eliminated.

APPLIED SCIENCES-BASEL (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Recycling of fiber reinforced composites with a focus on thermoplastic composites

Rebecca Bernatas et al.

Summary: The increasing demand for composite materials raises awareness on waste management. Challenges in the composite recycling sector include legal restrictions on waste disposal and the need to establish sustainable waste treatment solutions. Current research focuses on recovery of reinforcement fraction and the re-use of thermoplastic composites.

CLEANER ENGINEERING AND TECHNOLOGY (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Artificial intelligence and machine learning in design of mechanical materials

Kai Guo et al.

Summary: Artificial intelligence, especially machine learning and deep learning algorithms, is increasingly utilized in materials and mechanical engineering for predicting materials properties and designing new materials. Trained ML models offer fast exploration of design spaces, but challenges remain in data collection, preprocessing and model selection. Recent breakthroughs in ML techniques have opened up vast opportunities in overcoming mechanics problems and developing novel materials design strategies.

MATERIALS HORIZONS (2021)

添加到收藏夹

Article Energy & Fuels

A numerical investigation of the effects of ice accretion on the aerodynamic and structural behavior of offshore wind turbine blade

Oumnia Lagdani et al.

Summary: This article focuses on studying the aerodynamic and structural performances of wind turbines in cold climate conditions affected by icing. The research found that ice accumulation on the leading edge of the blade degrades the aerodynamic and structural performance of the turbine.

WIND ENGINEERING (2021)

添加到收藏夹

Article Chemistry, Physical

Modeling the effects of loading scenario and thermal expansion coefficient on potential failure of cryo-compressed hydrogen vessels

Ba Nghiep Nguyen et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

添加到收藏夹

Article Materials Science, Composites

An experimental study of the damage growth in composite laminates under tension-fatigue after impact

Raffael Bogenfeld et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Data-driven multiscale finite element method: From concurrence to separation

Rui Xu et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)

添加到收藏夹

Review Green & Sustainable Science & Technology

A review on the technologies, design considerations and numerical models of tidal current turbines

M. Nachtane et al.

RENEWABLE ENERGY (2020)

添加到收藏夹

Article Chemistry, Physical

3D Numerical Modeling of Laser Assisted Tape Winding Process of Composite Pressure Vessels and Pipes-Effect of Winding Angle, Mandrel Curvature and Tape Width

Amin Zaami et al.

MATERIALS (2020)

添加到收藏夹

Review Polymer Science

Application of the Finite Element Method in the Analysis of Composite Materials: A Review

Sarah David Muzel et al.

POLYMERS (2020)

添加到收藏夹

Review Energy & Fuels

Ammonia Borane: An Extensively Studied, Though Not Yet Implemented, Hydrogen Carrier

Umit Bilge Demirci

ENERGIES (2020)

添加到收藏夹

Review Chemistry, Physical

Is the H2 economy realizable in the foreseeable future? Part II: H2 storage, transportation, and distribution

Hassan Nazir et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

添加到收藏夹

Article Mechanics

Experimental investigation on the dynamic behavior of 3D printed CF-PEKK composite under cyclic uniaxial compression

M. Nachtane et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Effects of environmental exposure on the mechanical properties of composite tidal current turbine

M. Nachtane et al.

RENEWABLE ENERGY (2020)

添加到收藏夹

Article Energy & Fuels

Investigation of structural stability of type IV compressed hydrogen storage tank during refueling of fuel cell vehicle

Shitanshu Sapre et al.

ENERGY STORAGE (2020)

添加到收藏夹

Article Engineering, Mechanical

A Comprehensive Numerical Investigation on the Mechanical Performance of Hybrid Composite Tidal Current Turbine under Accidental Impact

H. Laaouidi et al.

INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING (2020)

添加到收藏夹

Article Energy & Fuels

High pressure thermal hydrogen compression employing Ti1.1CrMn metal hydride material

Claudio Corgnale et al.

JOURNAL OF PHYSICS-ENERGY (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Connecting concrete technology and machine learning: proposal for application of ANNs and CNT/concrete composites in structural health monitoring

Sofija Kekez et al.

RSC ADVANCES (2020)

添加到收藏夹

Article Energy & Fuels

Structural analysis of offshore wind turbine blades using finite element method

Hicham Boudounit et al.

WIND ENGINEERING (2020)

添加到收藏夹

Review Chemistry, Physical

Review on the research of hydrogen storage system fast refueling in fuel cell vehicle

Mengxiao Li et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

添加到收藏夹

Review Chemistry, Physical

Hydrogen storage and delivery: Review of the state of the art technologies and risk and reliability analysis

Ramin Moradi et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

添加到收藏夹

Article Chemistry, Physical

Development of regulations, codes and standards on composite tanks for on-board gaseous hydrogen storage

Dongliang Wang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

添加到收藏夹

Review Green & Sustainable Science & Technology

Underground hydrogen storage: Characteristics and prospects

Radoslaw Tarkowski

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)

添加到收藏夹

Review Chemistry, Physical

Hydrogen Storage for Mobility: A Review

Etienne Rivard et al.

MATERIALS (2019)

添加到收藏夹

Review Energy & Fuels

Review on hydrogen storage materials and methods from an electrochemical viewpoint

Manmeet Kaur et al.

JOURNAL OF ENERGY STORAGE (2019)

添加到收藏夹

Review Chemistry, Physical

A literature review of failure prediction and analysis methods for composite high-pressure hydrogen storage tanks

Ming Zhang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Recent Developments in Graphene Oxide/Epoxy Carbon Fiber-Reinforced Composites

John Keyte et al.

FRONTIERS IN MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Techno-economic analysis of conventional and advanced high-pressure tube trailer configurations for compressed hydrogen gas transportation and refueling

Krishna Reddi et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

添加到收藏夹

Article Materials Science, Composites

Inter laminar failure behavior in laminate carbon nanotubes-based polymer composites

M. Tarfaoui et al.

JOURNAL OF COMPOSITE MATERIALS (2018)

添加到收藏夹

Article Materials Science, Characterization & Testing

Investigating structural failure of a filament-wound composite tube subjected to internal pressure: Experimental and theoretical evaluation

Roham Rafiee et al.

POLYMER TESTING (2018)

添加到收藏夹

Article Engineering, Civil

Multiscale Failure Analysis of Cylindrical Composite Pressure Vessel: A Parametric Study

Lucas Lisboa Vignoli et al.

LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES (2018)

添加到收藏夹

Article Chemistry, Analytical

Crack Classification of a Pressure Vessel Using Feature Selection and Deep Learning Methods

Manjurul Islam et al.

SENSORS (2018)

添加到收藏夹

Article Energy & Fuels

Evaluation of durability of composite materials applied to renewable marine energy: Case of ducted tidal turbine

M. Nachtane et al.

ENERGY REPORTS (2018)

添加到收藏夹

Article Materials Science, Composites

Simulation of Mechanical Behavior and Damage of a Large Composite Wind Turbine Blade under Critical Loads

M. Tarfaoui et al.

APPLIED COMPOSITE MATERIALS (2018)

添加到收藏夹

Article Engineering, Mechanical

De novo composite design based on machine learning algorithm

Grace X. Gu et al.

EXTREME MECHANICS LETTERS (2018)

添加到收藏夹

Article Chemistry, Physical

Optimization of Type 4 composite pressure vessels using genetic algorithms and simulated annealing

V. Alcantar et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

添加到收藏夹

Article Chemistry, Physical

Hydrogen storage: Recent improvements and industrial perspectives

H. Barthelemy et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

添加到收藏夹

Review Green & Sustainable Science & Technology

Energy density and storage capacity cost comparison of conceptual solid and liquid sorption seasonal heat storage systems for low-temperature space heating

Luca Scapino et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Micromechanics-based progressive failure analysis of carbon fiber/epoxy composite vessel under combined internal pressure and thermomechanical loading

Liang Wang et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Review Chemistry, Physical

A review of toroidal composite pressure vessel optimisation and damage tolerant design for high pressure gaseous fuel storage

Calum P. Fowler et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

添加到收藏夹

Review Polymer Science

Recent advances in carbon fibers derived from biobased precursors

Amod A. Ogale et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2016)

添加到收藏夹

Article Mechanics

Continuum damage modeling and progressive failure analysis of carbon fiber/epoxy composite pressure vessel

Liang Wang et al.

COMPOSITE STRUCTURES (2015)

添加到收藏夹

Article Engineering, Manufacturing

A facile method for preparing CNT-grafted carbon fibers and improved tensile strength of their composites

Geunsung Lee et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

添加到收藏夹

Article Chemistry, Physical

700 bar type IV high pressure hydrogen storage vessel burst - Simulation and experimental validation

Juan Pedro Berro Ramirez et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

Fatigue reliability and service life prediction of aluminum naval ship details based on monitoring data

Mohamed Soliman et al.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2015)

添加到收藏夹

Article Mechanics

Composite damage model based on continuum damage mechanics and low velocity impact analysis of composite plates

Eun-Ho Kim et al.

COMPOSITE STRUCTURES (2013)

添加到收藏夹

Article Engineering, Multidisciplinary

Experimental and theoretical investigations on the failure of filament wound GRP pipes

Roham Rafiee

COMPOSITES PART B-ENGINEERING (2013)

添加到收藏夹

Article Materials Science, Composites

A multiscale modeling approach to analyze filament-wound composite pressure vessels

Ba Nghiep Nguyen et al.

JOURNAL OF COMPOSITE MATERIALS (2013)

添加到收藏夹

Article Mechanics

Comparison of optimal design methods for type 3 high-pressure storage tanks

P. Francescato et al.

COMPOSITE STRUCTURES (2012)

添加到收藏夹

Article Engineering, Multidisciplinary

Probabilistic analysis of the mechanical response of thick composite pipes under internal pressure

M. Bouhafs et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2012)

添加到收藏夹

Article Chemistry, Physical

Optimal design of high pressure hydrogen storage vessel using an adaptive genetic algorithm

Ping Xu et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)

添加到收藏夹

Article Chemistry, Physical

Technical assessment of cryo-compressed hydrogen storage tank systems for automotive applications

R. K. Ahluwalia et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)

添加到收藏夹

Article Chemistry, Physical

Experimental and numerical studies on the bonfire test of high-pressure hydrogen storage vessels

Jinyang Zheng et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Artificial immune system for optimal design of composite hydrogen storage vessel

Pengfei Liu et al.

COMPUTATIONAL MATERIALS SCIENCE (2009)

添加到收藏夹

Article Chemistry, Physical

Multi-criteria evaluation of hydrogen system options

Naim H. Afgan et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2007)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Optimisation methodology for cryotanks

G Tomassetti et al.

COMPUTERS & STRUCTURES (2005)

添加到收藏夹

Article Mechanics

Optimal design of filament wound type 3 tanks under internal pressure using a modified genetic algorithm

CU Kim et al.

COMPOSITE STRUCTURES (2005)

添加到收藏夹

Article Mechanics

Optimal design of filament wound structures under internal pressure based on the semi-geodesic path algorithm

CU Kim et al.

COMPOSITE STRUCTURES (2005)

添加到收藏夹

Article Engineering, Mechanical

Hypercars((R)), hydrogen, and the automotive transition

AB Lovins et al.

INTERNATIONAL JOURNAL OF VEHICLE DESIGN (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.