☆ 4.6 Article

Role of segregation behavior of Cu and Sb in the region of inclusions on initial corrosion

NPJ MATERIALS DEGRADATION (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Construction & Building Technology

Optimize Ni, Cu, Mo element of low Cr-steel rebars in tropical marine atmosphere environment through two years of corrosion monitoring

Baojun Dong et al.

Summary: By conducting outdoor exposure tests, it was found that adding Ni, Cu, and Mo elements in low Cr steel rebar can enhance its corrosion resistance in tropical marine environment. The protective layer of the rebar is mainly composed of Mo and Cr, with Cr inhibiting the growth of FeOOH in the rust layer, resulting in a more compact rust layer.

CEMENT & CONCRETE COMPOSITES (2022)

添加到收藏夹

Article Chemistry, Physical

Nucleation, growth and dissolution behaviour of galvanostatically deposited Sb/Sb-oxide on carbon steel

Rajini P. Antony et al.

Summary: This study investigates the nucleation, growth, and types of antimony deposits on carbon steel under different deposition conditions, and finds that electrochemical nucleation over-potential and pH at the electrode interface play dominant roles in determining the growth pattern and the type of deposition.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and Grain Boundary Corrosion Mechanism of Pearlitic Material

Zhaoliang Li et al.

Summary: The study found that defects in low-alloy weathering steel S500AW can lead to corrosion, especially with the ferrite inside the structure being more susceptible to corrosion. Precipitates at grain boundaries gradually fall off to form pits, affecting the corrosion resistance of the material.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Understanding the role of alloyed Ni and Cu on improving corrosion resistance of low alloy steel in the simulated Beishan groundwater

Yupeng Sun et al.

Summary: This study comparatively investigated the corrosion behavior of NiCu low alloy steel and Q235 low carbon steel in the simulated Beishan groundwater. The results showed that the corrosion resistance of NiCu steel was higher than that of Q235 steel, and the long-term corrosion mass loss of NiCu steel was significantly lower than that of Q235 steel, confirming the beneficial effects of NiCu alloying on improving the corrosion resistance of steel.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Corrosion of Cu-doped Ni-Mo low-alloy steel in a severe marine environment

Tianyi Zhang et al.

Summary: The corrosion performance of Cu-doped Ni-Mo steel in a simulated severe marine environment was comprehensively studied. The addition of Cu accelerated the generation of corrosion products and increased the corrosion current density during the initial corrosion process. By forming CuFeO2, Cu improved the long-term protection of rust layers and stabilized substances containing Mo4+ and Mo6+.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Integral effects of Ca and Sb on the corrosion resistance for the high strength low alloy steel in the tropical marine environment

Tianyi Zhang et al.

Summary: The effects of Ca and Sb on the corrosion properties of E690 steel in a simulated tropical marine environment were studied. Ca improved the corrosion resistance by modifying the inclusion in the steel, while Sb reduced the electrochemical activity on the steel surface. The enrichment of Ca and Sb in the rust layer increased its protectiveness.

CORROSION SCIENCE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Ni on the oxidation behavior of corrosion products that form on low alloy steel exposed to a thin electrolyte layer environment

Shan Jiang et al.

Summary: The oxidation behavior of corrosion products formed on Ni-containing low alloy steel was investigated. It was found that the enrichment of Ni can inhibit the oxidation reactions of the corrosion products and suppress oxygen reduction.

CORROSION SCIENCE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

New insights into the mechanism of localised corrosion induced by TiN-containing inclusions in high strength low alloy steel

Chao Liu et al.

Summary: This study investigated the mechanisms of localized corrosion triggered by complex inclusions in high strength low alloy steel. The role of the TiN portion of the inclusion in the corrosion process was examined. The results showed that localized corrosion was mainly induced by inclusions and triggered by dissolution of adjacent distorted matrix.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Unraveling the effect of chloride ion on the corrosion product film of Cr-Ni-containing steel in tropical marine atmospheric environment

Baojun Dong et al.

Summary: The effect of Cl- concentration on the corrosion behavior of Cr-containing steel in a tropical marine atmospheric environment has been investigated. Cl- ions influence the adsorption of water film and O2 diffusion. They reduce the formation of NiFeO4 and Cr(OH)3, disrupt the electronegativity of the inner film, weaken the enrichment of Ni, Mo, and Cr, and intensify the penetration of Cl- ions. The reduction in the amount of NiO and Cr2O3, due to oxygen reduction, decreases FeOOH nucleation sites, leading to increased pore formation in the corrosion product films.

CORROSION SCIENCE (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

A critical review of the recent advances in inclusion-triggered localized corrosion in steel

Pan Liu et al.

Summary: Localized corrosion caused by inclusions is a major cause of metallic material failure. The galvanic coupling theory has been widely accepted as the explanation for this corrosion damage mechanism, except for the chemical dissolution of some specific inclusions. However, recent evidence obtained through advanced technologies has sparked controversies and revealed unexpected results, challenging the previous entrenched ideas.

NPJ MATERIALS DEGRADATION (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Concentrations of Fe2+ and Fe3+ on the Corrosion Behavior of Carbon Steel in Cl- and SO42- Aqueous Environments

Kui Xiao et al.

Summary: This study investigated the effects of Fe2+ and Fe3+ concentrations on the corrosion of carbon steel through electrochemical methods and microscopic analysis. The results showed that Fe2+ influenced the cathode reaction and promoted the formation of γ-FeOOH and Fe3O4, while Fe3+ facilitated the formation of γ-Fe2O3 and Fe3O4.

METALS AND MATERIALS INTERNATIONAL (2021)

添加到收藏夹

Article Thermodynamics

Thermodynamic calculation of S-Sb system and Cu-S-Sb system

Jiaxin Cui et al.

Summary: In this study, thermodynamic calculations of the S-Sb and Cu-S-Sb systems were conducted using the CALPHAD technique, and Cu0.9Sb1S2 was experimentally confirmed. An associate solution model was adopted for the liquid phase due to the asymmetric shape and miscibility gap in the S-Sb phase diagram.

CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synergy of Cu and Sb to enhance the resistance of 3%Ni weathering steel to marine atmospheric corrosion

Wei Wu et al.

Summary: The incorporation of 0.5% Cu and 0.2% Sb into 3% Ni steel showed a synergistic effect in enhancing corrosion resistance by optimizing the properties of the corrosion product film. This synergy resulted in a thicker inner layer enriched with Cu, Sb, and Ni, significantly improving the compactness, phase composition, elemental distribution, and electrochemical activity of the CPF.

CORROSION SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

A study of rust layer of low alloy structural steel containing 0.1 % Sb in atmospheric environment of the Yellow Sea in China

Ying Yang et al.

Summary: The study found that the rust layer formed on the Sb-containing Steel has a better structure and phase composition, leading to better corrosion resistance compared to Sb-free Steel.

CORROSION SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

On how the corrosion behavior and the functions of Cu, Ni and Mo of the weathering steel in environments with different NaCl concentrations

Tianyi Zhang et al.

Summary: The corrosion resistance of weathering steel decreases as NaCl concentration increases, although the weight gain rate is lower in high concentration due to the inhibition on the diffusion of O2 caused by residual NaCl solution. In low NaCl concentrations, Cu, Ni, and Mo can promote the agglomeration process and improve the rust layer performance, while in high NaCl concentrations, this process is severely inhibited, resulting in a loose rust layer.

CORROSION SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fundamental understanding on the effect of Cr on corrosion resistance of weathering steel in simulated tropical marine atmosphere

Meihui Sun et al.

Summary: The addition of Cr in weathering steel greatly improves the corrosion resistance by promoting the transformation of rust layer and refining rust grains. Cr-formed products increase nucleation position and diffusion resistance, leading to a slower corrosion rate of the metal.

CORROSION SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Correlation between active/inactive (Ca, Mg, Al)-Ox-Sy inclusions and localised marine corrosion of EH36 steels

Yuhang Wang et al.

Summary: The study investigated the correlation between (Ca, Mg, Al)-O-x-S-y inclusions and localised marine corrosion of EH36 steels. The inclusions were categorized as 'active' or 'inactive' based on their ability to induce corrosion, with the ratio of CaO/Al2O3 being the main difference between them. Residual stress at the active inclusion/matrix interface was higher than the steel's yield strength, leading to the formation of a local plastic deformation zone and initiation of localized corrosion. Additionally, the occluded cell accelerated the propagation of corrosion, ultimately resulting in the dissolution of inclusions and the matrix forming a stable pit.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Chemistry, Analytical

Nanorods grown by copper anodizing in sodium carbonate

Wojciech J. Stepniowski et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Benefit of the corrosion product film formed on a new weathering steel containing 3% nickel under marine atmosphere in Maldives

Wei Wu et al.

CORROSION SCIENCE (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Preparation of Sb2O3/Sb2S3/FeOOH composite photoanodes for enhanced photoelectrochemical water oxidation

Yang Peng et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2020)

添加到收藏夹

Article Chemistry, Physical

CO2 electrolysis - Complementary operando XRD, XAS and Raman spectroscopy study on the stability of CuxO foam catalysts

Abhijit Dutta et al.

JOURNAL OF CATALYSIS (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Facile synthesis of Sb@Sb2O3/reduced graphene oxide composite with superior lithium-storage performance

Zhou Xiao-zhong et al.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Segregation and precipitation at grain boundaries of weathering steels without/with Sb addition

X. H. Guo et al.

MATERIALS CHEMISTRY AND PHYSICS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Role of Al2O3 inclusions on the localized corrosion of Q460NH weathering steel in marine environment

Chao Liu et al.

CORROSION SCIENCE (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Atomic scale understanding of the interaction between alloying copper and MnS inclusions in stainless steels in NaCl electrolyte

Y. T. Zhou et al.

CORROSION SCIENCE (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Age-hardening effect and formation of nanoscale composite precipitates in a NiAlMnCu-containing steel

Xiaojiao Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Characteristic and formation mechanism of inclusions in 2205 duplex stainless steel containing rare earth elements

Qiqi Ma et al.

MATERIALS TODAY-PROCEEDINGS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Corrosion behaviour of heavily deformed pearlitic and brass-coated pearlitic steels in sodium chloride solutions

V. Rault et al.

CORROSION SCIENCE (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of Cr, Ni and Cu on the Corrosion Behavior of Low Carbon Microalloying Steel in a CF- Containing Environment

Yanlei Zhou et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of copper addition on the formation of inclusions and the resistance to pitting corrosion of high performance duplex stainless steels

Soon-Hyeok Jeon et al.

CORROSION SCIENCE (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

The evolution of the corrosion of iron in hydraulic binders analysed from 46-and 260-year-old buildings

Amelie Demoulin et al.

CORROSION SCIENCE (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Composition changes around sulphide inclusions in stainless steels, and implications for the initiation of pitting corrosion

David E. Williams et al.

CORROSION SCIENCE (2010)

添加到收藏夹

Article Electrochemistry

A study on the initiation of pitting corrosion in carbon steel in chloride-containing media using scanning electrochemical probes

Bin Lin et al.

ELECTROCHIMICA ACTA (2010)

添加到收藏夹

Article Chemistry, Physical

Aging investigation on catalysts for hydrofluorocarbons synthesis

Stefania Albonetti et al.

APPLIED CATALYSIS A-GENERAL (2007)

添加到收藏夹

Article Nanoscience & Nanotechnology

An atom-probe tomographic study of the temporal evolution of the nanostructure of Fe-Cu based high-strength low-carbon steels

Dieter Isheim et al.

SCRIPTA MATERIALIA (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

Interfacial segregation at Cu-rich precipitates in a high-strength low-carbon steel studied on a sub-nanometer scale

D Isheim et al.

ACTA MATERIALIA (2006)

添加到收藏夹

Article Chemistry, Physical

Nanoscale studies of segregation at coherent heterophase interfaces in α-Fe based systems

D Isheim et al.

SURFACE AND INTERFACE ANALYSIS (2004)

添加到收藏夹

Article Chemistry, Multidisciplinary

In situ UV-Vis-NIR diffuse reflectance and Raman spectroscopy and catalytic activity studies of propane oxidative dehydrogenation over supported CrO3/ZrO2

TVM Rao et al.

LANGMUIR (2004)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effects of MnS on the heterogeneous nucleation of Cu precipitates in Fe-10 and-5mass%Cu alloys

H Hasegawa et al.

ISIJ INTERNATIONAL (2003)

添加到收藏夹

Article Construction & Building Technology

Atmospheric corrosion resistance of structural steels

P Albrecht et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2003)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of thermomechanical processing on the microstructure and properties of a low carbon copper bearing steel

MK Banerjee et al.

ISIJ INTERNATIONAL (2001)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cyclic stress response and fatigue behavior of Cu added ferritic steels

T Yokoi et al.

JOURNAL OF MATERIALS SCIENCE (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.