☆ 4.7 Article

Design Investigation of Potential Long-Range Hydrogen Combustion Blended Wing Body Aircraft with Future Technologies

AEROSPACE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Chemistry, Physical

Hydrogen-powered aviation and its reliance on green hydrogen infrastructure-Review and research gaps

J. Hoelzen et al.

Summary: This paper aims to assess the importance of a H2 infrastructure for aviation by providing a holistic overview of previous efforts. The study reveals that the economy of H2 aviation highly relies on the availability of low-cost, green liquid hydrogen supply infrastructure. The total operating costs of H2 aviation could increase due to LH2 costs alone.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

添加到收藏夹

Article Materials Science, Composites

Fundamental Frequency Optimization of Variable Angle Tow Laminates with Embedded Gap Defects

Joao Carvalho et al.

Summary: By optimizing the fiber angle, the fundamental frequency of composite structures can be maximized to improve their structural performance. Manufacturing constraints and linear fiber angle variation are considered, and existing results are improved by considering embedded gap defects.

JOURNAL OF COMPOSITES SCIENCE (2022)

添加到收藏夹

Article

Exploration of the effect of wing component post-buckling on bending-twist coupling for nonlinear wing twist

Daniel Hahn et al.

CEAS Aeronautical Journal (2022)

添加到收藏夹

Article

Aeroelastic method to investigate nonlinear elastic wing structures

Kjell Bramsiepe et al.

CEAS Aeronautical Journal (2022)

添加到收藏夹

Article Engineering, Aerospace

Active Flow Control Devices for Wing Load Alleviation

Khalid Khalil et al.

Summary: Active flow control has faced challenges in aircraft applications, but with continuous improvement of methods and regulations, it may be possible in the future. Studies have been conducted to assess flow control methods for load alleviation on transport aircraft wings at high speeds.

JOURNAL OF AIRCRAFT (2022)

添加到收藏夹

Article Engineering, Aerospace

Assessment of Future Airframe and Propulsion Technologies on Sustainability of Next-Generation Mid-Range Aircraft

Stanislav Karpuk et al.

Summary: This study compares two aircraft configurations with different design options to determine the best option for minimizing environmental impact. Through technology sensitivity analysis, engine-related technologies and laminar flow control were found to have the most significant influence on improving aircraft sustainability.

AEROSPACE (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

How Much Can Carbon Taxes Contribute to Aviation Decarbonization by 2050

Rosa Maria Arnaldo Valdes et al.

Summary: Aviation emissions from 2016 to 2050 could consume a significant portion of the remaining carbon budget, highlighting the need for immediate action to reduce emissions and achieve full decarbonization by the second half of the century. This paper explores the potential role of climate change levy schemes in reaching the ambitious goal of aviation decarbonization by 2050.

SUSTAINABILITY (2021)

添加到收藏夹

Article Engineering, Aerospace

Efficient Mesh Generation and Deformation for Aerodynamic Shape Optimization

Ney R. Secco et al.

Summary: The paper presents an efficient approach for generating high-quality structured meshes in a semi-automatic manner, along with a flexible mesh deformation method and an efficient approach for computing mesh deformation derivatives. The proposed approaches are evaluated for speed, scalability, and robustness, showing fast speed, strong scalability, and good robustness.

AIAA JOURNAL (2021)

添加到收藏夹

Article Energy & Fuels

Development of a Multi-Segment Parallel Compressor Model for a Boundary Layer Ingesting Fuselage Fan Stage

Jonas Voigt et al.

Summary: This methodological study evaluates the potential of boundary layer ingestion (BLI) to improve propulsion efficiency through a multi-segment parallel compressor model. It investigates the impact of BLI on fan performance and takes a step towards further reducing fuel consumption and lowering the environmental impact of future transport aircraft.

ENERGIES (2021)

添加到收藏夹

Article Energy & Fuels

How green is blue hydrogen?

Robert W. Howarth et al.

Summary: Despite the lower carbon dioxide emissions, the greenhouse gas emissions from the production of blue hydrogen are still quite high due to the release of fugitive methane. The use of blue hydrogen appears challenging to justify on climate grounds, as even with reduced methane emission rates, the emissions are still greater than simply burning natural gas.

ENERGY SCIENCE & ENGINEERING (2021)

添加到收藏夹

Article Engineering, Aerospace

Influence of Novel Airframe Technologies on the Feasibility of Fully-Electric Regional Aviation

Stanislav Karpuk et al.

Summary: The feasibility of regional electric aviation highly depends on technological advancements, especially in novel airframe technologies. Results showed that an all-electric aircraft with new technologies can significantly reduce emissions, but may face market obstacles due to an increase in Direct Operating Costs.

AEROSPACE (2021)

添加到收藏夹

Article Engineering, Aerospace

Proof of Concept Study for Fuselage Boundary Layer Ingesting Propulsion

Arne Seitz et al.

Summary: Key results from the EU H2020 project CENTRELINE are presented, focusing on the research activities and design solutions for the propulsive fuselage concept (PFC) integration, as well as the implications on fuel burn, emissions, and noise for the potential aircraft design entry-into-service in 2035.

AEROSPACE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Comparative Study of Three Carbon Additives: Carbon Nanotubes, Graphene, and Fullerene-C60, for Synthesizing Enhanced Polymer Nanocomposites

Xingyu Wang et al.

NANOMATERIALS (2020)

添加到收藏夹

Article Engineering, Aerospace

Multi-Fidelity Design Optimization of a Long-Range Blended Wing Body Aircraft with New Airframe Technologies

Stanislav Karpuk et al.

AEROSPACE (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

OpenMDAO: an open-source framework for multidisciplinary design, analysis, and optimization

Justin S. Gray et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2019)

添加到收藏夹

Article Engineering, Aerospace

Assessment on critical technologies for conceptual design of blended-wing-body civil aircraft

Zhenli Chen et al.

CHINESE JOURNAL OF AERONAUTICS (2019)

添加到收藏夹

Article Energy & Fuels

Modelling and Designing Cryogenic Hydrogen Tanks for Future Aircraft Applications

Christopher Winnefeld et al.

ENERGIES (2018)

添加到收藏夹

Article Energy & Fuels

Modelling of A Boundary Layer Ingesting Propulsor

Nils Budziszewski et al.

ENERGIES (2018)

添加到收藏夹

Article Engineering, Aerospace

Modeling Boundary Layer Ingestion Using a Coupled Aeropropulsive Analysis

Justin S. Gray et al.

JOURNAL OF AIRCRAFT (2018)

添加到收藏夹

Article Mechanics

On manufacturing constraints for tow-steered composite design optimization

Timothy R. Brooks et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Engineering, Aerospace

Boundary Layer Ingestion Benefit of the D8 Transport Aircraft

Alejandra Uranga et al.

AIAA JOURNAL (2017)

添加到收藏夹

Article Engineering, Aerospace

Gust load alleviation wind tunnel tests of a large-aspect-ratio flexible wing with piezoelectric control

Bi Ying et al.

CHINESE JOURNAL OF AERONAUTICS (2017)

添加到收藏夹

Review Engineering, Aerospace

Review of evolving trends in blended wing body aircraft design

Paul Okonkwo et al.

PROGRESS IN AEROSPACE SCIENCES (2016)

添加到收藏夹

Article Engineering, Aerospace

Climate-Compatible Air Transport System-Climate Impact Mitigation Potential for Actual and Future Aircraft

Katrin Dahlmann et al.

AEROSPACE (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Measurements of near-ultimate strength for multiwalled carbon nanotubes and irradiation-induced crosslinking improvements

Bei Peng et al.

NATURE NANOTECHNOLOGY (2008)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Blended wing body structures in multidisciplinary pre-design

Lars U. Hansen et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2008)

添加到收藏夹

Article Meteorology & Atmospheric Sciences

The impact of cruise altitude on contrails and related radiative forcing

C Fichter et al.

METEOROLOGISCHE ZEITSCHRIFT (2005)

添加到收藏夹

Article Engineering, Aerospace

Reduced environmental impact by lowered cruise altitude for liquid hydrogen-fuelled aircraft

F Svensson et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2004)

添加到收藏夹

Article Engineering, Aerospace

Design of the blended wing body subsonic transport

RH Liebeck

JOURNAL OF AIRCRAFT (2004)

添加到收藏夹

Article Mathematics, Applied

SNOPT: An SQP algorithm for large-scale constrained optimization

PE Gill et al.

SIAM JOURNAL ON OPTIMIZATION (2002)

添加到收藏夹

Article Engineering, Aerospace

Estimate of the climate impact of cryoplanes

S Marquart et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2001)

添加到收藏夹

Article Multidisciplinary Sciences

Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load

MF Yu et al.

SCIENCE (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.