☆ 4.6 Article

Impact of Nano-CaCO3 and PVA Fiber on Properties of Fresh and Hardened Geopolymer Mortar

BUILDINGS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Flexural fracture parameters of polypropylene fiber reinforced geopolymer

Li Li et al.

Summary: Geopolymer concrete can effectively reduce the negative environmental impacts of cement manufacturing. In this study, the effect of polypropylene fibers (PP fiber) with different properties on fracture toughness was evaluated. Experimental groups of PP fiber geopolymers were tested, and the results showed that the reinforcing index influenced the fracture toughness, with an initial increase and subsequent decrease. Low water-binder ratios generally led to higher fracture properties. PP fiber showed better toughness enhancement and economic benefits compared to other fibers.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

添加到收藏夹

Article Construction & Building Technology

Workability, rheology, and geopolymerization of fly ash geopolymer: Role of alkali content, modulus, and water-binder ratio

Wanli Wang et al.

Summary: The study investigates the effects of alkali admixture (A/F), activator modulus (Ms), and water-binder ratio (w/b) on the performance of fresh and hardened fly ash geopolymers (FAGs) through rheological, strength, and microstructural tests. The rheological behavior of the FAG paste conforms to the H-B model, and by adjusting the parameters, the properties of the FAG paste can be effectively improved while maintaining strength.

CONSTRUCTION AND BUILDING MATERIALS (2023)

添加到收藏夹

Article Green & Sustainable Science & Technology

Characteristic of Fresh and Harden Properties of Polyvinyl Alcohol Fibre Reinforced Alkali Activated Composite

Yiguang Wang et al.

Summary: This study investigates the effects of fibre content and length-diameter ratio on alkali-activated materials, revealing that fibres can significantly enhance the mechanical properties without compromising the flowability within a specific range.

JOURNAL OF RENEWABLE MATERIALS (2023)

添加到收藏夹

Article Construction & Building Technology

Assessment of fiber factor for the fracture toughness of polyethylene fiber reinforced geopolymer

Ning Zhang et al.

Summary: This study investigated the influence of polyethylene fiber and water-binder ratio on the fracture properties of high toughness geopolymer, revealing that the fracture toughness of PFRG increased first and then decreased with the increase of fiber factor. The optimal fiber factor was determined to be 580.65. Additionally, it was found that the fracture toughness of PFRG with a water-binder ratio of 0.35 was generally greater than that of 0.38, and the gain ratio of unstable fracture toughness was higher than that of initial cracking toughness.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Construction & Building Technology

Synergistic Effect between CaCO3 Whisker and Steel-PVA Fiber Cocktail in Cement-Based Material at Elevated Temperature

Li Li et al.

Summary: A new fiber cocktail reinforced cement-based material (NFCRCM) with steel, PVA fiber, and CCW was developed to enhance fire resistance. The introduction of CCW reduced the degradation of flexural strength and toughness of steel-PVA fiber cocktail reinforced cement-based materials below 800 degrees C. Below 800 degrees C, NFCRCM with 1.5% steel fiber + 0.5% PVA fiber + 3% CCW exhibited a significant positive hybrid effect in flexural strength and toughness due to microscopic crack inhibition and nucleation effect of CCW. However, at temperatures of 800 degrees C or above, a negative hybrid effect was observed due to thermal decomposition of CCW.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Ceramics

Effect of fiber factor on the workability and mechanical properties of polyethylene fiber-reinforced high toughness geopolymers

Cheng-feng Hu et al.

Summary: In this study, the influence of fiber factor on the workability, mechanical properties, and internal defects of PE fiber-reinforced high toughness geopolymers was investigated. Two specific fiber parameters, critical fiber factor and dense fiber factor, were proposed. The results showed that the fiber factor significantly affected the workability and mechanical properties of the material within a certain range, and the selection of fiber parameters was crucial for achieving satisfactory workability and excellent mechanical properties.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Rheological and viscoelastic characterizations of fly ash/slag/silica fume-based geopolymer

Li Li et al.

Summary: This study investigates the rheological and viscoelastic properties of geopolymer grouting material (GGM) with different content of fly ash (FA), slag (SL), and silica fume (SF). The results show that SL and SF have significant effects on the shear stress, yield stress, and plastic viscosity of GGM. The addition of SF can also enhance the G' of GGM. Moreover, SF improves the flowability of GGM with FA and SL, while FA and SL result in poor flowability due to the generation of C-(A)-S-H.

JOURNAL OF CLEANER PRODUCTION (2022)

添加到收藏夹

Article Construction & Building Technology

Characterization of bending performance of reinforced cementitious composites beams with hybrid fibers after exposure to high temperatures

Li Li et al.

Summary: The study focused on the bending performance of reinforced beams containing various fibers after exposure to high temperature, showing that the introduction of steel-PVA-whisker hybrid fibers can significantly alleviate thermal bursting and cracking, while increasing peak load. However, the introduction of whisker may lead to decreased peak load and a change in shear failure pattern in the beams.

STRUCTURAL CONCRETE (2022)

添加到收藏夹

Article Construction & Building Technology

Crack fractal analysis of fractured polyethylene fiber reinforced alkali activated mortar under flexural load

Li Li et al.

Summary: This paper studied the external crack characteristics of polyethylene fiber-reinforced alkali activated mortar and found that volume fraction and length were important factors affecting crack behavior, and crack characteristics were positively correlated with strength and toughness.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Construction & Building Technology

Fiber factor for fresh and hardened properties of polyethylene fiber-reinforced geopolymer mortar

Zixiang Meng et al.

Summary: This study investigated the effect of polyethylene (PE) fibers on the properties of geopolymer mortars. The results showed that when the fiber factor (FF) was between the critical FF and dense FF, the mechanical properties were significantly improved and the mixture could still flow, which was the best region for preparing fiber reinforced geopolymeric mortars.

JOURNAL OF BUILDING ENGINEERING (2022)

添加到收藏夹

Article Construction & Building Technology

Impact of polyethylene fiber reinforcing index on the flexural toughness of geopolymer mortar

Rui Ren et al.

Summary: In this paper, the influence of polyethylene fiber reinforcing index on the toughness parameters of geopolymer mortar was investigated. The results showed that increasing the fiber reinforcing index improved the toughness of the geopolymer composite.

JOURNAL OF BUILDING ENGINEERING (2022)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

Surface Cracking and Fractal Characteristics of Cement Paste after Exposure to High Temperatures

Li Li et al.

Summary: The surface cracking and fractal characteristics of calcium carbonate whisker-reinforced cement pastes subjected to high temperatures were studied. The results showed that the crack area, length, and fractal dimension increased with temperature. The decomposition of chemical substances in the specimen led to a more significant growth of cracks at temperatures above 900 degrees Celsius. The area and fractal dimension of cracks were less affected by the size and shape of the specimen.

FRACTAL AND FRACTIONAL (2022)

添加到收藏夹

Article Engineering, Civil

Pore pressure and spalling in fire-exposed high-strength self-consolidating concrete reinforced with hybrid fibres

Cong Zhang et al.

Summary: This study found that micro PP fibers play a dominant role in reducing pore pressure of high-strength self-consolidating concrete (HSSCC), while the combination of steel and macro PP fibers have varying effects in different depth regions.

EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING (2021)

添加到收藏夹

Article Construction & Building Technology

Engineering and gamma-ray attenuation properties of steel furnace slag heavyweight concrete with nano calcium carbonate and silica

Mohammed A. Khalaf et al.

Summary: The study focuses on using nanomaterials such as nano-silica slurry and nano-calcium carbonate as additives to improve the properties of steel furnace-slag heavyweight concrete, including durability, mechanical strength, and gamma-ray attenuation properties. The combined use of nanosilica slurry and nano-calcium carbonate was found to enhance the mechanical strength, fluid transport, and gamma-ray shielding properties of the concrete.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

NANOINDENTATION AND POROSITY FRACTAL DIMENSION OF CALCIUM CARBONATE WHISKER REINFORCED CEMENT PASTE AFTER ELEVATED TEMPERATURES (UP TO 900°C)

Li Li et al.

Summary: This research investigates the effects of high temperature on the microstructure of calcium carbonate whisker (CW) reinforced cement paste, finding that up to 500 degrees C, the properties are relatively stable but degrade significantly above 700 degrees C due to CW decomposition. The introduction of CW can lead to decreased pore parameters and increased fractal dimension up to 400 degrees C, but at higher temperatures, the pore structure deteriorates due to CW decomposition. Fractal dimension is shown to be a useful tool for evaluating changes in pore structure at high temperatures.

FRACTALS-COMPLEX GEOMETRY PATTERNS AND SCALING IN NATURE AND SOCIETY (2021)

添加到收藏夹

Article Engineering, Mechanical

Mechanical and fracture properties of geopolymer concrete with basalt fiber using digital image correlation

Yamin Wang et al.

Summary: This study investigated the mechanical and fracture properties of basalt fiber reinforced fly ash geopolymer concrete with different fiber lengths, and found that the 6 mm fiber reinforced concrete exhibited the best performance. Before reaching the 80% peak load level, a decrease in crack length and an improvement in relative COD increment were observed in the basalt fiber reinforced concrete.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)

添加到收藏夹

Article Chemistry, Physical

Influence of Polypropylene Fibre Factor on Flowability and Mechanical Properties of Self-Compacting Geopolymer

Bei-chen Pu et al.

Summary: This study investigated the influence of the polypropylene fiber factor (FF) on the flowability, mechanical properties, and compactness of fibre-reinforced self-compacting geopolymer. It was found that fiber length significantly impacted flowability, while fiber addition had a greater effect on flow rate and mechanical properties.

MATERIALS (2021)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

Surface Cracking and Fractal Characteristics of Bending Fractured Polypropylene Fiber-Reinforced Geopolymer Mortar

Li Li et al.

Summary: The study focused on the surface crack characteristics of fiber-reinforced geopolymer composites. Crack parameters such as length, width, area, and fractal dimension increased with the increase in fiber volume fraction, with rapid growth at low fiber content and gradual slowdown at higher fractions. The critical fiber factor and dense fiber factor for polypropylene fiber-reinforced geopolymer mortar were found to be higher than those for fiber-reinforced Portland cementitious composites. The influence of various crack parameters on flexural strength followed the order of crack area, width, length, and fractal dimension.

FRACTAL AND FRACTIONAL (2021)

添加到收藏夹

Review Green & Sustainable Science & Technology

A review of properties and behaviour of reinforced geopolymer concrete structural elements- A clean technology option for sustainable development

Amer Hassan et al.

JOURNAL OF CLEANER PRODUCTION (2020)

添加到收藏夹

Article Construction & Building Technology

Effects of high temperature and post-fire-curing on compressive strength and microstructure of calcium carbonate whisker-fly ash-cement system

Xing Ming et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Characterization and properties of geopolymer nanocomposites with different contents of nano-CaCO3

Hasan Assaedi et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Establishment of fiber factor for rheological and mechanical performance of polyvinyl alcohol (PVA) fiber reinforced mortar

Wen Si et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Effect of high temperature on morphologies of fibers and mechanical properties of multi-scale fiber reinforced cement-based composites

Li Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Microstructure and Strength of Calcium Carbonate (CaCO3) Whisker Reinforced Cement Paste After Exposed to High Temperatures

Mingli Cao et al.

FIRE TECHNOLOGY (2019)

添加到收藏夹

Review Chemistry, Physical

Effect of Macro-, Micro- and Nano-Calcium Carbonate on Properties of Cementitious CompositesA Review

Mingli Cao et al.

MATERIALS (2019)

添加到收藏夹

Article Engineering, Manufacturing

Fracture behavior of cement mortar reinforced by hybrid composite fiber consisting of CaCO3 whiskers and PVA-steel hybrid fibers

Mingli Cao et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Influence of high temperature on strength, ultrasonic velocity and mass loss of calcium carbonate whisker reinforced cement paste

Mingli Cao et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Construction & Building Technology

Effect of different PVA and steel fiber length and content on mechanical properties of CaCO3 whisker reinforced cementitious composites

M. Cao et al.

MATERIALES DE CONSTRUCCION (2019)

添加到收藏夹

Article Construction & Building Technology

Comparative roles between aragonite and calcite calcium carbonate whiskers in the hydration and strength of cement paste

Li Li et al.

CEMENT & CONCRETE COMPOSITES (2019)

添加到收藏夹

Article Construction & Building Technology

Microstructure of calcium carbonate whisker reinforced cement paste after elevated temperature exposure

Li Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Construction & Building Technology

Effects of CaCO3 whisker, hybrid fiber content and size on uniaxial compressive behavior of cementitious composites

Li Li et al.

STRUCTURAL CONCRETE (2019)

添加到收藏夹

Article Construction & Building Technology

Behaviour and damage assessment of a new hybrid-fibre-reinforced mortar under impact load

Mingli Cao et al.

MAGAZINE OF CONCRETE RESEARCH (2018)

添加到收藏夹

Article Construction & Building Technology

New models for predicting workability and toughness of hybrid fiber reinforced cement-based composites

Mingli Cao et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Construction & Building Technology

Influence of calcium carbonate whisker and polyvinyl alcohol- steel hybrid fiber on ultrasonic velocity and resonant frequency of cementitious composites

Li Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Construction & Building Technology

Effect of hybrid fibers, calcium carbonate whisker and coarse sand on mechanical properties of cement-based composites

M. Cao et al.

MATERIALES DE CONSTRUCCION (2018)

添加到收藏夹

Article Materials Science, Composites

The effect of hybridization and geometry of polypropylene fibers on engineered cementitious composites reinforced by polyvinyl alcohol fibers

H. R. Pakravan et al.

JOURNAL OF COMPOSITE MATERIALS (2016)

添加到收藏夹

Article Chemistry, Physical

Geopolymer from kaolin in China: An overview

Z. H. Zhang et al.

APPLIED CLAY SCIENCE (2016)

添加到收藏夹

Article Construction & Building Technology

Multiple effects of nano-SiO2 and hybrid fibers on properties of high toughness fiber reinforced cementitious composites with high-volume fly ash

Qinghua Li et al.

CEMENT & CONCRETE COMPOSITES (2016)

添加到收藏夹

Article Engineering, Manufacturing

Rheology, fiber distribution and mechanical properties of calcium carbonate (CaCO3) whisker reinforced cement mortar

Mingli Cao et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

添加到收藏夹

Article Construction & Building Technology

Using Calcium Carbonate Whisker in Hybrid Fiber-Reinforced Cementitious Composites

Mingli Cao et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

The effect of synthetic polyethylene fiber on the strain hardening behavior of engineered cementitious composite (ECC)

Shwan H. Said et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Construction & Building Technology

Optimized workability and mechanical properties of FRCM by using fiber factor approach: theoretical and experimental study

Arezoo Emdadi et al.

MATERIALS AND STRUCTURES (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

The effect of fiber properties on high performance alkali-activated slag/silica fume mortars

Serdar Aydin et al.

COMPOSITES PART B-ENGINEERING (2013)

添加到收藏夹

Article Construction & Building Technology

Compressive Behavior of Steel-Fiber-Reinforced Concrete with a High Reinforcing Index

Yu-Chen Ou et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2012)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.