☆ 4.7 Article

Lightweight and Flexible 3D ERGO@Cu/PA Mesh Current Collector of Li Metal Battery for Dendrite Suppression

ACS APPLIED POLYMER MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Environmental

Thin, flexible sulfide-based electrolyte film and its interface engineering for high performance solid-state lithium metal batteries

Hong Liu et al.

Summary: A thin sulfide-based electrolyte film with high ionic conductivity, wide electrochemical window, heat-resistance, and mechanical strength has been prepared. Interface engineering on the anode interface has greatly enhanced compatibility, leading to outstanding long-term cyclic stability of Li symmetric battery. The application of such thin electrolyte and interface engineering in SSLMBs shows high safety and durability.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

A review of concepts and contributions in lithium metal anode development

Huadong Yuan et al.

Summary: This review presents a historical framework of important concepts and breakthroughs in enabling lithium metal anodes to be practically applied. It also discusses and summarizes the major contributions from different institutions, journals, authors, and highly cited papers. The goal of this review is to motivate more researchers to pave the way for high-energy lithium metal batteries in the future.

MATERIALS TODAY (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Dendrite-Free Lithium-Metal Anode Enabled by Designed Ultrathin MgF2 Nanosheets Encapsulated Inside Nitrogen-Doped Graphene-Like Hollow Nanospheres

Shang-Qi Li et al.

Summary: In this study, a composite material consisting of ultrathin MgF2 nanosheets encapsulated in hollow nanospheres was used to address the issues of lithium dendrite growth and volume change. The study explored the deposition behavior and mechanism of lithium in the composite material and achieved good cycling stability and reversible capacity.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Electrochemically reduced graphene oxide: Preparation, composites, and applications

An'an Zhou et al.

Summary: This review provides a comprehensive summary of the electrochemical reduction of graphene oxide (GO) and the resulting electrochemically reduced graphene oxide (ERGO). The electrochemical reduction method offers advantages such as eco-friendliness, high efficiency, and controllability, enabling the direct growth of high-quality graphene on electrodes. The review covers the reduction mechanisms, the influence of experimental parameters on the reduction process and the properties of ERGO, as well as the fabrication of composites based on ERGO. Additionally, the applications of ERGO and its composites in various fields are discussed, along with the remaining challenges.

CARBON (2022)

添加到收藏夹

Article Engineering, Environmental

Nanoscale localized growth of SnSb for general-purpose high performance alkali (Li, Na, K) ion storage

Xuejian Shi et al.

Summary: In this study, SnSb alloy nanoparticles were successfully encapsulated into N-doped carbon nanotubes and carbon shells, forming a corn-like structure. The resulting composite exhibited excellent electrochemical storage performance for alkali metal-ion batteries, with high reversibility and fast electrochemical kinetics. It also showed good mechanical flexibility and integrity.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Chemistry, Physical

Organic-inorganic composite SEI for a stable Li metal anode by in-situ polymerization

Wenzhuo Cao et al.

Summary: A new organic-inorganic composite solid electrolyte interface (SEI) membrane has been developed, which effectively improves the side reactions between Li metal anode and electrolyte, enhancing the safety and cycling performance of the battery.

NANO ENERGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Improving the cycling stability of lithium metal anodes using Cu3N-modified Cu foil as a current collector

Danlei Tang et al.

Summary: This study demonstrates the use of Cu3N nanowires modified Cu foil as a current collector for a lithium metal anode, effectively suppressing lithium dendrite growth and improving the coulombic efficiency and safety of the battery. The reaction between Cu3N and lithium enables the formation of a Li3N-rich solid electrolyte interphase (SEI), promoting lithium ion transport and homogeneous deposition. The Cu3N NWs/Cu anode exhibits stable lithium plating/stripping over 270 cycles and achieves a long cycling lifespan of 430 cycles.

SCIENCE CHINA-MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Lithiophilic onion-like carbon spheres as lithium metal uniform deposition host

Zipeng Jiang et al.

Summary: In this study, we report a method of coating silver nanoparticles on nitrogen-doped onion-like carbon microspheres as a host to reduce the nucleation overpotential in lithium metal batteries. The Ag@NCS showed excellent performance in lithium deposition with low nucleation overpotential and high coulombic efficiency.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Lithiophilic Interphase Porous Buffer Layer toward Uniform Nucleation in Lithium Metal Anodes

Xiaohua Shen et al.

Summary: This study presents an innovative Cu collector with lithiophilicity and a dense lithiophilic-enriched solid electrolyte interphase layer, which enables stable charge transfer and inhibits the growth of lithium dendrites. The addition of flexible graphene layer enhances the structural integrity and electron transport kinetics.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Modification of Cu current collectors for lithium metal batteries-A review

Bingxin Zhou et al.

Summary: The energy density of lithium metal batteries could be much higher than that of current graphite anode-based LIBs. However, dendritic lithium growth and unstable solid-electrolyte interface are challenges. Modifications of the commonly used copper current collector have been investigated to improve battery performance.

PROGRESS IN MATERIALS SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Rational design of a self-supporting skeleton decorated with dual lithiophilic Sn-containing and N-doped carbon tubes for dendrite-free lithium metal anodes

Jiaxiao Ge et al.

Summary: By constructing a functional self-supporting skeleton decorated with dual lithiophilic Sn-containing and N-doped carbon tubes, the nucleation of Li and the formation of Li dendrites can be regulated, resulting in enhanced electrochemical performances for Li metal batteries.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

添加到收藏夹

Article Chemistry, Physical

In-situ construction of lithiophilic interphase in vertical micro-channels of 3D copper current collector for high performance lithium-metal batteries

Junru Wang et al.

Summary: By coating a lithiophilic Li-Sb interphase on a 3D Cu current collector with vertical micro-channels, the study demonstrates significantly enhanced cycling life and safety performance in lithium metal batteries. The novel battery architecture allows for ultra-long lifespan under high areal capacity and low current density conditions.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Lithiophilic and Antioxidative Copper Current Collectors for Highly Stable Lithium Metal Batteries

Ang Fu et al.

Summary: The study introduces a formate-treatment strategy to reconstruct Cu current collectors for increased lithiophilicity and oxidation resistibility. The full cell using these treated Cu nanowires as anode current collectors shows excellent cycling performance, and the concept of an upper current collector simplifies the manufacturing process of Li/Cu anodes.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Review Polymer Science

Nylon-A material introduction and overview for biomedical applications

Mohamadreza Shakiba et al.

Summary: Nylon is a versatile engineering plastic widely used in biomedical applications due to its desirable properties. Despite its usefulness, there is still a need for further research on the interactions between nylon and human body tissues. Researchers are also exploring antimicrobial strategies to improve the potential of nylon materials for long-term contact with tissues.

POLYMERS FOR ADVANCED TECHNOLOGIES (2021)

添加到收藏夹

Review Chemistry, Physical

Recent Advances in Emerging Non-Lithium Metal-Sulfur Batteries: A Review

Lianbo Ma et al.

Summary: Rechargeable non-lithium metal-sulfur batteries face challenges such as polysulfide shuttle effects and serious side reactions between metal anodes and electrolytes, but various strategies have been explored to overcome these issues. Recent studies on non-lithium MSBs have focused on material design, fabrication methods, and electrochemical performance, highlighting the importance of advanced characterization techniques and elaborately designed structures. Discussions on remaining issues and potential future research directions for practical applications are ongoing.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Review Energy & Fuels

Research Progress on Copper-Based Current Collector for Lithium Metal Batteries

Yongchao Liu et al.

Summary: Lithium metal batteries have the potential to improve energy density and power density compared to conventional lithium-ion batteries, but face challenges such as dendrite growth and safety hazards. Using a metal current collector is crucial for enhancing the performance of lithium metal anodes.

ENERGY & FUELS (2021)

添加到收藏夹

Editorial Material Chemistry, Physical

Engineering current collectors for batteries with high specific energy

Rishav Choudhury et al.

JOULE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Dendrite Suppression by a Polymer Coating: A Coarse-Grained Molecular Study

Xian Kong et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

In Situ Generation of Artificial Solid-Electrolyte Interphases on 3D Conducting Scaffolds for High-Performance Lithium-Metal Anodes

Pengbo Zhai et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Advanced Liquid Electrolytes for Rechargeable Li Metal Batteries

Yulin Jie et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Is graphite lithiophobic or lithiophilic?

Jian Duan et al.

NATIONAL SCIENCE REVIEW (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Dynamic Intelligent Cu Current Collectors for Ultrastable Lithium Metal Anodes

Jianyu Chen et al.

NANO LETTERS (2020)

添加到收藏夹

Article Chemistry, Applied

Ion association tailoring SEI composition for Li metal anode protection

Yitao He et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

添加到收藏夹

Article Chemistry, Physical

Lithiophilic polymer interphase anchored on laser-punched 3D holey Cu matrix enables uniform lithium nucleation leading to super-stable lithium metal anodes

Jiangmin Jiang et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Ionic conductive polymers as artificial solid electrolyte interphase films in Li metal batteries - A review

Shilun Gao et al.

MATERIALS TODAY (2020)

添加到收藏夹

Article Engineering, Environmental

Sn layer decorated copper mesh with superior lithiophilicity for stable lithium metal anode

Jingyi Luan et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Energy & Fuels

Ultralight and fire-extinguishing current collectors for high-energy and high-safety lithium-ion batteries

Yusheng Ye et al.

NATURE ENERGY (2020)

添加到收藏夹

Article Chemistry, Physical

Inducing uniform lithium nucleation by integrated lithium-rich li-in anode with lithiophilic 3D framework

Songsong Liu et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Design Principles of Artificial Solid Electrolyte Interphases for Lithium-Metal Anodes

Zhiao Yu et al.

CELL REPORTS PHYSICAL SCIENCE (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Robust Lithium Metal Anodes Realized by Lithiophilic 3D Porous Current Collectors for Constructing High-Energy Lithium-Sulfur Batteries

Fei Pei et al.

ACS NANO (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Lightweight 3D Cu Nanowire Network with Phosphidation Gradient as Current Collector for High-Density Nucleation and Stable Deposition of Lithium

Chen Zhang et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Improved lithium deposition on silver plated carbon fiber paper

Xiaoyun Li et al.

NANO ENERGY (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Guiding Uniform Li Plating/Stripping through Lithium-Aluminum Alloying Medium for Long-Life Li Metal Batteries

Huan Ye et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

添加到收藏夹

Article Chemistry, Physical

The interaction of ethylammonium tetrafluoroborate [EtNH3+][BF4-] ionic liquid on the Li(001) surface: towards understanding early SEI formation on Li metal

Jonathan Clarke-Hannaford et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2019)

添加到收藏夹

Article Chemistry, Physical

A 3D Cu current collector with a biporous structure derived by a phase inversion tape casting method for stable Li metal anodes

Li-Min Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Biophysics

Direct electrochemical reduction of hematite decorated graphene oxide (alpha-Fe2O3@erGO) nanocomposite for selective detection of Parkinson's disease biomarker

Georgeena Mathew et al.

BIOSENSORS & BIOELECTRONICS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Directing lateral growth of lithium dendrites in micro-compartmented anode arrays for safe lithium metal batteries

Peichao Zou et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Chemistry, Physical

Compact 3D Copper with Uniform Porous Structure Derived by Electrochemical Dealloying as Dendrite-Free Lithium Metal Anode Current Collector

Heng Zhao et al.

ADVANCED ENERGY MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Vacuum distillation derived 3D porous current collector for stable lithium-metal batteries

Yongling An et al.

NANO ENERGY (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Protecting the Li-Metal Anode in a Li-O-2 Battery by using Boric Acid as an SEI-Forming Additive

Zhimei Huang et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Hierarchical Silver-Nanowire-Graphene Host Enabling Ultrahigh Rates and Superior Long-Term Cycling of Lithium-Metal Composite Anodes

Pan Xue et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Correction Nanoscience & Nanotechnology

Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries (vol 13, pg 715, 2018)

Xiulin Fan et al.

NATURE NANOTECHNOLOGY (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

An Artificial Solid Electrolyte Interphase with High Li-Ion Conductivity, Mechanical Strength, and Flexibility for Stable Lithium Metal Anodes

Yayuan Liu et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Nanoscale Nucleation and Growth of Electrodeposited Lithium Metal

Allen Pei et al.

NANO LETTERS (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Graphene balls for lithium rechargeable batteries with fast charging and high volumetric energy densities

In Hyuk Son et al.

NATURE COMMUNICATIONS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Stable Li Metal Anodes via Regulating Lithium Plating/Stripping in Vertically Aligned Microchannels

Shu-Hua Wang et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ultrafine Silver Nanoparticles for Seeded Lithium Deposition toward Stable Lithium Metal Anode

Chunpeng Yang et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Review Chemistry, Multidisciplinary

Reviving Lithium-Metal Anodes for Next-Generation High-Energy Batteries

Yanpeng Guo et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Chemical Dealloying Derived 3D Porous Current Collector for Li Metal Anodes

Qinbai Yun et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Article Electrochemistry

Complete Coating of Underlying Pt Electrodes by Electrochemical Reduction of Graphene Oxide

Jason A. Bennett et al.

ELECTROCHIMICA ACTA (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Free-Standing Copper Nanowire Network Current Collector for Improving Lithium Anode Performance

Lei -Lei Lu et al.

NANO LETTERS (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Layered reduced graphene oxide with nanoscale interlayer gaps as a stable host for lithium metal anodes

Dingchang Lin et al.

NATURE NANOTECHNOLOGY (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Lithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode

Yayuan Liu et al.

NATURE COMMUNICATIONS (2016)

添加到收藏夹

Article Energy & Fuels

Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth

Kai Yan et al.

NATURE ENERGY (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Accommodating lithium into 3D current collectors with a submicron skeleton towards long-life lithium metal anodes

Chun-Peng Yang et al.

NATURE COMMUNICATIONS (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Defect-induced plating of lithium metal within porous graphene networks

Rahul Mukherjee et al.

NATURE COMMUNICATIONS (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Green Approach to the Synthesis of Graphene Nanosheets

Hui-Lin Guo et al.

ACS NANO (2009)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.