Magnetite-impregnated biochar of parthenium hysterophorus for adsorption of Cr(VI) from tannery industrial wastewater

The tannery industry inevitably generates toxic and catastrophic wastewater, which results in a huge threat to public health and water resources. Therefore, this work aimed to synthesize parthenium hysterophorus-based biochar-Fe3O4 composite for removal of Cr(VI) from tannery wastewater under 3(4) full factorial experimental designs of the Box-Behnken, which was analyzed using response surface methodology under four independent factors of pH (3, 6, and 9), initial Cr(VI) concentrations (40, 70, and 100 mg/L), contact times (30, 60, and 90 min), and adsorbent doses (20, 60, and 100 mg/100 mL). This composite adsorbent was described by a high BET surface area of 237.4 m(2)/g, XRD prominent peaks, SEM morphology corroborate and FTIR multifunctionalities of O-H at 3296 cm(-1), the vibration of ketone C-OH at 1240 cm(-1), and the vibration of C-O-C at 1147 cm(-1) and Fe-O stretching at 542 cm(-1). The maximum Cr(IV) removal efficiency of 91.8% was recorded at an initial Cr(VI) concentration of 40 mg/L, pH of 3, adsorbent dose of 100 mg/100 mL, and a contact time of 90 min, whereas the minimum Cr(VI) removal of 17.3% was observed at an initial Cr(VI) concentration of 100 mg/L, 20 mg/100 mL of adsorbent dose, pH of 9, and contact time of 30 min. The concentration of Cr(VI) in real wastewater was determined to be 85.13 mg/L and its remediation was found to be 81.8%. Langmuir's model was the best fit with experimental data at R-2 0.99 and q(max) 400 mg/g, showing that the adsorption process was homogenous and monolayer. In conclusion, the adsorption results were encouraging, and biochar-Fe3O4 appears to be a potential candidate for Cr removal from wastewater.

Automated summary

Parthenium hysterophorus-based biochar-Fe3O4 composites were synthesized to remove Cr(VI) from tannery wastewater. The adsorption process was optimized using response surface methodology, and the results showed that the composite had a high removal efficiency.