☆ 4.7 Article

Computational Modeling of Multiscale Air Filter Media Consisting of Nano- and Microfibers

ACS APPLIED NANO MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Chemistry, Physical

Advances in particulate matter filtration: Materials, performance, and application

Xuzheng Ji et al.

Summary: Airborne pollutants in particulate matter (PM) pose a significant threat to human health and effective virus filtration is crucial during the COVID-19 pandemic. This review provides an overview of PM, including its source, classification, filtration mechanisms, and evaluation parameters. Advanced filtration materials, such as polymers and MOFs, and their antibacterial performance are discussed. The application of PM filtration is divided into end-of-pipe treatment and source control, and future research prospects are presented in the conclusion.

GREEN ENERGY & ENVIRONMENT (2023)

添加到收藏夹

Article Nanoscience & Nanotechnology

Sequential Multiscale Simulation of a Filtering Facepiece for Prediction of Filtration Efficiency and Resistance in Varied Particulate Scenarios

Kyeongeun Lee et al.

Summary: This study utilized a novel multiscale modeling and simulation approach to predict the filtration behavior and service life of a facepiece under various particulate conditions. The developed virtual models were validated and used to simulate diverse particulate environments, showcasing an economic and effective research method for filter development.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Review Nanoscience & Nanotechnology

Protective Face Masks: Current Status and Future Trends

Alberto Tunon-Molina et al.

Summary: During the COVID-19 pandemic, face masks have played a crucial role in personal protection. However, traditional face masks made of materials lacking inactivation properties may still lead to infection transmission. Researchers have been working on developing face masks with antimicrobial, self-cleaning, reusable, and biodegradable properties to provide extra protection in a sustainable way.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Crystal Violet-Impregnated Slippery Surface to Prevent Bacterial Contamination of Surfaces

Adnan Patir et al.

Summary: The study found that slippery surfaces had increased resistance to bacterial contamination compared to other surfaces, but did not completely inhibit bacterial attachment, only retarding surface contamination. A strategy was developed to kill bacteria with minimal adhesion, resulting in a crystal violet-impregnated slippery (CVIS) surface with bactericidal and slippery features. Tests showed that the CVIS surface exhibited bactericidal activity against Escherichia coli and Staphylococcus aureus, with significantly enhanced bactericidal activity in white light.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Three-Dimensional Analysis of Particle Distribution on Filter Layers inside N95 Respirators by Deep Learning

Hye Ryoung Lee et al.

Summary: The global COVID-19 pandemic has changed daily lives, with wearing face masks becoming common. Research shows that the average porosity of filter layers is 89.1%, with fibers less than 1.8 μm in diameter being particularly effective.

NANO LETTERS (2021)

添加到收藏夹

Article Polymer Science

Disinfection Treatments of Disposable Respirators Influencing the Bactericidal/Bacteria Removal Efficiency, Filtration Performance, and Structural Integrity

Seojin Jung et al.

Summary: This study compared eight disinfection methods for the reuse of respirators and discussed their effects on filtration and bactericidal efficiency. Different methods had different impacts on bacterial inactivation and filtration efficiency, with some methods leading to damage in filtration performance.

POLYMERS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Hierarchically Structured Nanocellulose-Implanted Air Filters for High-Efficiency Particulate Matter Removal

Zhenjun Xiong et al.

Summary: The hierarchically structured nanocellulose-implanted air filter prepared using freeze-drying technique showed high filtration capacity and achieved efficient removal of PM0.3 while maintaining a relatively low pressure drop. All the raw materials used were biodegradable, nonpetroleum-based materials, contributing to sustainable development.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Engineering, Chemical

High fidelity simulation of ultrafine PM filtration by multiscale fibrous media characterized by a combination of X-ray CT and FIB-SEM

Zhengyuan Pan et al.

Summary: This study successfully reconstructed a three-dimensional digital model of nanofiber-based filter media using advanced characterization technologies and modular simulation models, and conducted filtration simulations that agreed well with experimental results. The structure-resolved models showed higher accuracy but also higher computational costs, while unresolved simulations tended to overpredict filtration efficiency.

JOURNAL OF MEMBRANE SCIENCE (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Systematic experimental comparison of particle filtration efficiency test methods for commercial respirators and face masks

Joel C. Corbin et al.

Summary: Respirators, medical masks, and barrier face coverings all use similar physical principles for filtering airborne particles but are tested for certification using various standardized test methods. Experimental studies have shown that factors such as face velocity and particle charge significantly affect the filtration efficiency of these products. Different testing methods, such as ASTM F2299/F2100, can lead to differences in measured filtration efficiencies compared to the NIOSH method.

SCIENTIFIC REPORTS (2021)

添加到收藏夹

Review Nanoscience & Nanotechnology

Multistructured Electrospun Nanofibers for Air Filtration: A Review

Tao Lu et al.

Summary: This paper reviews the preparation methods of high-performance electrospun air filtration membranes (EAFMs) and the typical surface structures and filtration principles of electrospun fibers for air filtration. It also summarizes the research progress of EAFMs with multistructures and their applications, as well as discussing challenges, limitations, and future trends for development.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Review Engineering, Chemical

Nanofibrous Mats for Particulate Matter Filtration

Bright Archer et al.

Summary: This review discusses the high filtration efficiency of nanofibrous filters for removing PM pollution, covering various fabrication techniques and parameters, as well as addressing future challenges in filter technology, making it a comprehensive overview in the field.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

添加到收藏夹

Review Nanoscience & Nanotechnology

Advances in Facemasks during the COVID-19 Pandemic Era

Mamata Karmacharya et al.

Summary: The COVID-19 pandemic has led to changes in daily lives, with technologies and materials playing a role in reducing infection spread. Facemasks are a reliable preventive measure but may pose a risk of cross-infection due to lack of virucidal properties after use.

ACS APPLIED BIO MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Probing the Nanoparticle Loading Characteristics and the Filtration Performance with the Continuous and Intermittent Use of Disposable Filtering Masks

Kyeongeun Lee et al.

Summary: This study investigated the impact of particle exposure and storage conditions on the performance and resistance of single use, disposable foldable type filtering masks. It found that intermittent exposure conditions accelerated performance deterioration, limiting the service life of the masks.

ACS APPLIED NANO MATERIALS (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Advances in air filtration technologies: structure-based and interaction-based approaches

S. Han et al.

Summary: The intensifying air pollution has raised growing public health concerns. Efforts have been made to advance air filtration technologies to overcome the trade-off relationship between filtration efficiency and pressure drop. This review discusses recent progress in air filtration technology with a focus on optimizing filter structure and enhancing electrostatic interaction.

MATERIALS TODAY ADVANCES (2021)

添加到收藏夹

Article Engineering, Chemical

Designing optimally-graded depth filter media using a novel multiscale method

Constantin Geerling et al.

AICHE JOURNAL (2020)

添加到收藏夹

Article Environmental Sciences

Can respirator face masks in a developing country reduce exposure to ambient particulate matter?

Sasan Faridi et al.

JOURNAL OF EXPOSURE SCIENCE AND ENVIRONMENTAL EPIDEMIOLOGY (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Experimental and Computational Investigation of Intra- and Interlayer Space for Enhanced Depth Filtration and Reduced Pressure Drop

Sanghyun Roh et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Review Polymer Science

Advanced Design of Fiber-Based Particulate Filters: Materials, Morphology, and Construction of Fibrous Assembly

Seojin Jung et al.

POLYMERS (2020)

添加到收藏夹

Article Materials Science, Paper & Wood

Simulation of performance of fibrous filter media composed of cellulose and synthetic fibers

Zhengyuan Pan et al.

CELLULOSE (2019)

添加到收藏夹

Article Engineering, Civil

Influence of fiber diameter, filter thickness, and packing density on PM2.5 removal efficiency of electrospun nanofiber air filters for indoor applications

Ye Bian et al.

BUILDING AND ENVIRONMENT (2019)

添加到收藏夹

Article Energy & Fuels

Study on Calculation Method of Soluble Aerosol Removal Efficiency Under High Humidity Condition

Yingzhi Li et al.

FRONTIERS IN ENERGY RESEARCH (2019)

添加到收藏夹

Article Construction & Building Technology

Evaluation of different discharging methods on HVAC electret filter media

Min Tang et al.

BUILDING AND ENVIRONMENT (2018)

添加到收藏夹

Article Construction & Building Technology

Relationship between pressure drop and face velocity for electrospun nanofiber filters

Tongling Xia et al.

ENERGY AND BUILDINGS (2018)

添加到收藏夹

Article Engineering, Chemical

Air-borne particle capture by fibrous filter media under collision effect: A CFD-based approach

Ajay Kumar Maddineni et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2018)

添加到收藏夹

Article Environmental Sciences

Field Evaluation of N95 Filtering Facepiece Respirators on Construction Jobsites for Protection against Airborne Ultrafine Particles

Atin Adhikari et al.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2018)

添加到收藏夹

Article Engineering, Chemical

Airflow and particle transport simulations for predicting permeability and aerosol filtration efficiency in fibrous media

P. -C. Gervais et al.

CHEMICAL ENGINEERING SCIENCE (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Highly Integrated Polysulfone/Polyacrylonitrile/Polyamide-6 Air Filter for Multilevel Physical Sieving Airborne Particles

Shichao Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A software framework for probabilistic sensitivity analysis for computationally expensive models

N. Vu-Bac et al.

ADVANCES IN ENGINEERING SOFTWARE (2016)

添加到收藏夹

Article Engineering, Chemical

Microstructure Simulation as Part of Fibrous Filter Media Development Processes - From Real to Virtual Media

Martin J. Lehmann et al.

CHEMICAL ENGINEERING & TECHNOLOGY (2016)

添加到收藏夹

Article Public, Environmental & Occupational Health

Respirator Performance against Nanoparticles under Simulated Workplace Activities

Evanly Vo et al.

ANNALS OF OCCUPATIONAL HYGIENE (2015)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Simulations of filter media performances from microtomography-based computational domain. Experimental and analytical comparison

P. -C. Gervais et al.

COMPUTERS & FLUIDS (2015)

添加到收藏夹

Article Environmental Sciences

Characterization of ambient particles size in workplace of manufacturing physical fitness equipments

Chih-Chung Lin et al.

INDUSTRIAL HEALTH (2015)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

A computational library for multiscale modeling of material failure

Hossein Talebi et al.

COMPUTATIONAL MECHANICS (2014)

添加到收藏夹

Article Engineering, Environmental

Particle Size-Specific Distributions and Preliminary Exposure Assessments of Organophosphate Flame Retardants in Office Air Particulate Matter

Fangxing Yang et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2014)

添加到收藏夹

Article Engineering, Mechanical

A semi-concurrent multiscale approach for modeling damage in nanocomposites

Mohammad Silani et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2014)

添加到收藏夹

Article Environmental Sciences

Factors Affecting Filter Penetration and Quality Factor of Particulate Respirators

Sheng-Hsiu Huang et al.

AEROSOL AND AIR QUALITY RESEARCH (2013)

添加到收藏夹

Article Engineering, Chemical

Investigation of the figure of merit for filters with a single nanofiber layer on a substrate

Jing Wang et al.

JOURNAL OF AEROSOL SCIENCE (2008)

添加到收藏夹

Article Environmental Sciences

What does respirator certification tell us about filtration of ultrafine particles?

Robert M. Eninger et al.

JOURNAL OF OCCUPATIONAL AND ENVIRONMENTAL HYGIENE (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.