Studies on the Physical Changes in Corn Seeds during Hybrid Drying (Convection and Microwave)

Hybrid seed drying technology, based on convection and microwave drying, is a modern method, and the research on the physical changes in cereal seed resulting from hybrid drying is still in its infancy. The aim of the present paper is to study the uniformity of the drying process by examining the physical changes occurring in corn seeds. An innovative drying equipment, combining convective and microwave drying, was used to dry corn seeds (variety DKC5068). The convective drying was performed during the pneumatic transport of the seeds, using hot air at a maximum temperature of 50 degrees C; the microwave-based drying was performed using 2.45 GHz microwaves. Thus, the seeds were volumetrically heated at a temperature which does not exceed 44 degrees C. The physical changes in corn seeds were measured in terms of moisture, volume, cracking and color. The results regarding the moisture and volume changes in the seeds during the drying process proved that moist seeds are more homogeneous than dry seeds. The change in volume also changed the stiffness of the seeds, which showed greater homogeneity after drying compared to wet seeds. Hybrid drying led to an average shrinkage of 8.76% compared with the original seed volume, while the percentage of seeds showing cracks after drying increased by 22%. Generally, the drying process also led to color changes, but in the case of hybrid drying the results were inconclusive. Hybrid drying of corn seeds requires a shorter time and does not significantly influence physical characteristics, compared to other drying technologies.

Automated summary

The aim of this study is to investigate the uniformity of the drying process by examining the physical changes in corn seeds. An innovative drying equipment, combining convective and microwave drying, was used to dry corn seeds. The results showed that hybrid drying led to more uniform seeds and required a shorter drying time.