☆ 4.7 Article

A modified three-dimensional Hoek-Brown criterion for intact rocks and jointed rock masses

GEOMECHANICS AND GEOPHYSICS FOR GEO-ENERGY AND GEO-RESOURCES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Energy & Fuels

A criterion of rockburst in coal mines considering the influence of working face mining velocity

Haitao Li et al.

Summary: This study investigates the influence of working face mining velocity on the mechanical behavior of the roof in coal mines. A theoretical model considering roof subsidence is proposed and a failure criterion based on the impending length of the roof is obtained. The concept of roof extension rate is introduced and integrated into the roof failure criterion, improving its accuracy. The insufficiency of current roof deformation monitoring methods and the need for reasonable mining velocity determination are discussed.

GEOMECHANICS AND GEOPHYSICS FOR GEO-ENERGY AND GEO-RESOURCES (2022)

添加到收藏夹

Article Energy & Fuels

Energy evolution characteristics of deep sandstone with different true triaxial stress paths

Junwen Zhang et al.

Summary: Stress path and occurrence depth have significant effects on the energy evolution properties of deep rock. Triaxial tests were conducted to investigate the energy evolution characteristics and distribution process of deep sandstone under different simulated depths and stress paths. The results show that the energy of deep sandstone is positively correlated with the simulated depth under similar stress paths. The energy under one-sided unloading conditions of X-direction stress is greater than that under two-sided unloading conditions, which is greater than that under one-sided unloading conditions of X- and Y-direction stresses. The ratio k of deep sandstone exhibits different trends with increasing Z-direction strain at different simulated depths. Simulated depth is positively correlated with the initial energy storage and energy storage limit of deep sandstone under the same stress path. The pre-peak energy dissipation rate of deep sandstone decreases gradually with increasing simulated depth, while the post-peak energy dissipation rate increases gradually.

GEOMECHANICS AND GEOPHYSICS FOR GEO-ENERGY AND GEO-RESOURCES (2022)

添加到收藏夹

Article Engineering, Geological

An empirical relation for parameter m(i) in the Hoek-Brown criterion of anisotropic intact rocks with consideration of the minor principal stress and stress-to-weak-plane angle

Tao Wen et al.

Summary: This study developed a relation for the anisotropy parameter m(i) of rock strength as a bivariate, second-order, polynomial function of the minor principal stress and the angle between the major principal stress and weak plane. The modified Hoek-Brown strength criterion showed improved ability to determine the strength of metamorphic and sedimentary rocks, based on the analysis of extensive uniaxial and triaxial compression test data from various rock types. Further research is needed to explore the applicability of this criterion to additional rock types.

ACTA GEOTECHNICA (2021)

添加到收藏夹

Article Engineering, Geological

A Unified Constitutive Model for Rock Based on Newly Modified GZZ Criterion

Haohua Chen et al.

Summary: This paper introduces a unified constitutive model for rocks based on the modified generalized Zhang-Zhu criterion. The model is successfully implemented in a 3D finite-difference code and validated through true triaxial tests, with results showing good agreement with experimental data. The model is also used to predict rock displacements in a highway rock tunnel construction, with results matching field measurements.

ROCK MECHANICS AND ROCK ENGINEERING (2021)

添加到收藏夹

Article Engineering, Geological

A simplified three-dimensional extension of Hoek-Brown strength criterion

Hangzhou Li et al.

Summary: The study identifies the effect of sigma(2) on the strength of rocks through true triaxial tests and develops a simple 3D strength criterion. The modified criterion demonstrates a good fit to most rock types and performs better than other criteria in predicting rock strengths.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2021)

添加到收藏夹

Article Energy & Fuels

Stability analysis of wellbore for multiple weakness planes in shale formations

Wanchun Zhao et al.

Summary: A reasonable prediction model for shale wellbore collapse instability was constructed in this study using the Mohr-Coulomb criterion and the multistructural plane strength theory for multiple weakness planes. The results showed that collapse pressure increases with the number of weak planes, leading to a narrower safe drilling window and increased drilling difficulty. The influence of weak plane inclination on collapse pressure is weakened when drilling along the minimum horizontal ground stress azimuth.

GEOMECHANICS AND GEOPHYSICS FOR GEO-ENERGY AND GEO-RESOURCES (2021)

添加到收藏夹

Article Engineering, Environmental

Strength and failure characteristics of jointed marble under true triaxial compression

Yaohui Gao et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2020)

添加到收藏夹

Article Engineering, Geological

A Semi-empirical Failure Criterion for Brittle Rocks

Qi-Zhi Zhu et al.

ROCK MECHANICS AND ROCK ENGINEERING (2020)

添加到收藏夹

Article Engineering, Geological

Failure properties of cubic granite, marble, and sandstone specimens under true triaxial stress

Kun Du et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2020)

添加到收藏夹

Article Engineering, Geological

Applicability of a new modified explicit three-dimensional Hoek-Brown failure criterion to eight rocks

Linjian Ma et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2020)

添加到收藏夹

Article Engineering, Geological

Experimental Study of Mechanical Behavior of Gneiss Considering the Orientation of Schistosity under True Triaxial Compression

Xufeng Liu et al.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2020)

添加到收藏夹

Article Engineering, Geological

Modelling Rock Failure with a Novel Continuous to Discontinuous Method

Bin Gong et al.

ROCK MECHANICS AND ROCK ENGINEERING (2019)

添加到收藏夹

Article Engineering, Geological

Novel 3D Failure Criterion for Rock Materials

Feng Gao et al.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2019)

添加到收藏夹

Article Engineering, Geological

Study of deformation and failure in an anisotropic rock with a three-dimensional discrete element model

Yulong Zhang et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2019)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Constitutive model for inherent anisotropic rocks: Ubiquitous joint model based on the Hoek-Brown failure criterion

Mohamed Ismael et al.

COMPUTERS AND GEOTECHNICS (2019)

添加到收藏夹

Review Engineering, Geological

Rock mechanics contributions to recent hydroelectric developments in China

Xia-Ting Feng et al.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2019)

添加到收藏夹

Article Engineering, Geological

Characteristic Stress Levels and Brittle Fracturing of Hard Rocks Subjected to True Triaxial Compression with Low Minimum Principal Stress

Yao-Hui Gao et al.

ROCK MECHANICS AND ROCK ENGINEERING (2018)

添加到收藏夹

Article Energy & Fuels

Comparative analysis of the nonlinear unified strength criterion for rocks and other three-dimensional Hoek-Brown strength criteria

Qun Yang et al.

GEOMECHANICS AND GEOPHYSICS FOR GEO-ENERGY AND GEO-RESOURCES (2018)

添加到收藏夹

Article Engineering, Geological

A generalized nonlinear failure criterion for frictional materials

Shunchuan Wu et al.

ACTA GEOTECHNICA (2017)

添加到收藏夹

Article Geochemistry & Geophysics

Failure characteristics of two porous sandstones subjected to true triaxial stresses

Xiaodong Ma et al.

JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2016)

添加到收藏夹

Article Engineering, Geological

A Simple Three-dimensional Failure Criterion for Rocks Based on the Hoek-Brown Criterion

Hua Jiang et al.

ROCK MECHANICS AND ROCK ENGINEERING (2015)

添加到收藏夹

Proceedings Paper Construction & Building Technology

Research on Shear Failure Criterion for Layered Rock Mass

Zhizeng Zhang et al.

TRENDS IN CIVIL ENGINEERING, PTS 1-4 (2012)

添加到收藏夹

Article Engineering, Geological

A modified Hoek-Brown failure criterion for anisotropic intact rock

H. Saroglou et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2008)

添加到收藏夹

Article Engineering, Geological

Application of critical plane approach to the prediction of strength anisotropy in transversely isotropic rock masses

Youn-Kyou Lee et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2008)

添加到收藏夹

Article Engineering, Geological

A generalized three-dimensional Hoek-Brown strength criterion

L. Zhang

ROCK MECHANICS AND ROCK ENGINEERING (2008)

添加到收藏夹

Article Construction & Building Technology

Response of an anisotropic rock mass under polyaxial stress state

Rajendra P. Tiwari et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2007)

添加到收藏夹

Article Engineering, Geological

Limit analysis solutions for the bearing capacity of rock masses using the generalised Hoek-Brown criterion

R. S. Merifield et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2006)

添加到收藏夹

Article Engineering, Geological

Determination of shear strength and three-dimensional yield strength for the hoek-brown criterion

SD Priest

ROCK MECHANICS AND ROCK ENGINEERING (2005)

添加到收藏夹

Article Engineering, Geological

Effect of transverse anisotropy on the 0Hoek-Brown strength parameter 'mi' for intact rocks

K Colak et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2004)

添加到收藏夹

Article Engineering, Geological

Anisotropic strength and deformational behavior of Himalayan schists

MHB Nasseri et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2003)

添加到收藏夹

Article Engineering, Geological

A failure criterion for transversely isotropic rocks

YM Tien et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2001)

添加到收藏夹

Article Engineering, Geological

A new true triaxial cell for testing mechanical properties of rock, and its use to determine rock strength and deformability of Westerly granite

B Haimson et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.