☆ 4.5 Review

Cold sintering-enabled interface engineering of composites for solid-state batteries

FRONTIERS IN ENERGY RESEARCH (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Electrochemistry

Cold Sintered LiMn2O4 for High-Rate Capability Electrodes

Khushnuda Nur et al.

Summary: This study demonstrates that cold sintering can effectively densify LiMn2O4 at lower temperatures, leading to improved discharge capacity and cycling stability without the need for post-annealing treatment. This is achieved through the removal/thinning of the insulating Li2CO3 layer.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2022)

添加到收藏夹

Article Materials Science, Ceramics

Microstructure and ion conductivity of Al-LLZO solid electrolyte prepared by molten salt and cold sintering process

Ying Zhang et al.

Summary: The study focused on the preparation process of Li6.25Al0.25La3Zr2O12 solid electrolyte, demonstrating that cold sintering technology can improve the density and Li+ conductivity of the electrolyte.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2022)

添加到收藏夹

Article Chemistry, Physical

High-safety composite solid electrolyte based on inorganic matrix for solid-state lithium-metal batteries

Qilin Hu et al.

Summary: Composite solid electrolytes (CSEs) combine the advantages of polymer electrolytes and inorganic ceramic electrolytes, showing better safety and mechanical properties. CSEs with high inorganic ceramic loadings are prepared using a cold sintering method at a low temperature, providing stable cycling performance.

MATERIALS TODAY ENERGY (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Effect of LiOH solution additives on ionic conductivity of Li6.25Al0.25La3Zr2O12 electrolytes prepared by cold sintering

Junzhan Zhang et al.

Summary: Li7La3Zr2O12 has attracted much attention in solid-state batteries due to its excellent ionic conductivity, stable contact with lithium metal, and wide electrochemical window. In this study, Li6.25Al0.25La3Zr2O12 electrolytes were prepared using cold sintering and annealing, and the effects of liquid-phase medium and annealing temperatures on their phase compositions and ionic conductivities were investigated. The highest ionic conductivity was achieved with the addition of LiOH solution and annealing at 1000 degrees C.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2022)

添加到收藏夹

Article Materials Science, Ceramics

High permittivity BaTiO3 and BaTiO3-polymer nanocomposites enabled by cold sintering with a new transient chemistry: Ba(OH)(2)center dot 8H(2)O

Takao Sada et al.

Summary: Cold sintering process (CSP) can be used for the fabrication of high permittivity dielectric nanocomposite materials, and the Ba(OH)2·8H2O hydrated flux enables densification of BaTiO3 at remarkably low temperatures, resulting in high relative density and permittivity.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Design and Sintering of All-Solid-State Composite Cathodes with Tunable Mixed Conduction Properties via the Cold Sintering Process

Zane Grady et al.

Summary: This study investigates the effects of low-temperature densification on the mixed conducting properties of composite cathode systems using cold sintering. The results show that by optimizing processing conditions, the electrical conductivity of the composites can be significantly increased and the transference number can be modulated, potentially enabling applications in the field of solid-state batteries.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Physics, Applied

Cold sintering, enabling a route to co-sinter an all-solid-state lithium-ion battery

Joo-Hwan Seo et al.

Summary: The cold sintering process significantly reduces the manufacturing cost and difficulty of solid-state lithium-ion batteries while maintaining high performance, with high capacity and cycle life retention.

JAPANESE JOURNAL OF APPLIED PHYSICS (2021)

添加到收藏夹

Article Physics, Applied

Cold sintering for Li1.5Al0.5Ge1.5(PO4)3 using LiNO3-LiOH as a transient solvent

Kenji Takashima et al.

Summary: By using LiNO3-LiOH salt as a transient solvent, dense LAGP ceramics with high ionic conductivity can be successfully prepared at lower temperatures, without damage at the grain boundary.

JAPANESE JOURNAL OF APPLIED PHYSICS (2021)

添加到收藏夹

Article Geosciences, Multidisciplinary

What process causes the slowdown of pressure solution creep

Renchao Lu et al.

Geomechanics and Geophysics for Geo-Energy and Geo-Resources (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Solid-state Li metal battery enabled by cold sintering at 120 °C

P. Jiang et al.

Summary: The cold sintering process (CSP) is used to prepare ceramic solid electrolytes at an extremely low temperature, leading to high ionic conductivity and stability. This method provides a new approach for fabricating better solid-state batteries.

MATERIALS TODAY PHYSICS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cold sintering of ZnO-PTFE: Utilizing polymer phase to promote ceramic anisotropic grain growth

Thomas Herisson de Beauvoir et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Multiscale deformation processes during cold sintering of nanovaterite compacts

Matthias Haug et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Review Materials Science, Ceramics

A review of cold sintering processes

Salvatore Grasso et al.

ADVANCES IN APPLIED CERAMICS (2020)

添加到收藏夹

Article Materials Science, Ceramics

Toward a size scale-up cold sintering process at reduced uniaxial pressure

Sun Hwi Bang et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Interfaces and Interphases in All-Solid-State Batteries with Inorganic Solid Electrolytes

Abhik Banerjee et al.

CHEMICAL REVIEWS (2020)

添加到收藏夹

Article Materials Science, Ceramics

Influence of cold sintering process on the structure and properties of garnet-type solid electrolytes

Xinchao Wang et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Ceramics

Broad temperature dependence, high conductivity, and structure-property relations of cold sintering of LLZO-based composite electrolytes

Joo-Hwan Seo et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

A Route towards Fabrication of Functional Ceramic/Polymer Nanocomposite Devices Using the Cold Sintering Process

Sinan Dursun et al.

ACS APPLIED ELECTRONIC MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Anisothermal densification kinetics of the cold sintering process below 150 °C

Sun Hwi Bang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ceramic-Salt Composite Electrolytes from Cold Sintering

Wonho Lee et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Insight into the Microstructure and Ionic Conductivity of Cold Sintered NASICON Solid Electrolyte for Solid-State Batteries

Yulong Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-Performance, Low-Cost, and Dense-Structure Electrodes with High Mass Loading for Lithium-Ion Batteries

Xinsheng Wu et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Cold Sintering: Progress, Challenges, and Future Opportunities

Jing Guo et al.

ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 49 (2019)

添加到收藏夹

Article Materials Science, Ceramics

Flash joining of conductive ceramics in a few seconds by flash spark plasma sintering

Mattia Biesuz et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cold sintering process for fabrication of a high volumetric capacity Li4Ti5O12 anode

Joo-Hwan Seo et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2019)

添加到收藏夹

Article Materials Science, Ceramics

Cold-sintered V2O5-PEDOT:PSS nanocomposites for negative temperature coefficient materials

Yingying Zhao et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

添加到收藏夹

Review Nanoscience & Nanotechnology

Hierarchical 3D electrodes for electrochemical energy storage

Hongtao Sun et al.

NATURE REVIEWS MATERIALS (2019)

添加到收藏夹

Review Chemistry, Physical

Solid Garnet Batteries

Ning Zhao et al.

JOULE (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

New Opportunities in Metallization Integration in Cofired Electroceramic Multilayers by the Cold Sintering Process

Thomas Herisson de Beauvoir et al.

ACS APPLIED ELECTRONIC MATERIALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Unveiling the mechanisms of cold sintering of ZnO at 250 degrees C by varying applied stress and characterizing grain boundaries by Kelvin Probe Force Microscopy

J. Gonzalez-Julian et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Materials Science, Ceramics

Contrasting energy efficiency in various ceramic sintering processes

Damoon Sohrabi Baba Heidary et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

Recent Progress in Applications of the Cold Sintering Process for Ceramic-Polymer Composites

Jing Guo et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Article Materials Science, Ceramics

Demonstration of the cold sintering process study for the densification and grain growth of ZnO ceramics

Shuichi Funahashi et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)

添加到收藏夹

Editorial Material Materials Science, Multidisciplinary

Sintering and Related Phenomena

M. Qian

JOM (2017)

添加到收藏夹

Article Materials Science, Ceramics

Cold sintering process of Li1.5Al0.5Ge1.5(PO4)3 solid electrolyte

Seth S. Berbano et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)

添加到收藏夹

Article Materials Science, Ceramics

Cold sintering of a Li-ion cathode: LiFePO4-composite with high volumetric capacity

Joo-Hwan Seo et al.

CERAMICS INTERNATIONAL (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Cold Sintering: A Paradigm Shift for Processing and Integration of Ceramics

Jing Guo et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

添加到收藏夹

Review Materials Science, Ceramics

A review of two-step sintering for ceramics

N. J. Loh et al.

CERAMICS INTERNATIONAL (2016)

添加到收藏夹

Article Materials Science, Ceramics

Cold Sintering Process: A Novel Technique for Low-Temperature Ceramic Processing of Ferroelectrics

Hanzheng Guo et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2016)

添加到收藏夹

Article Chemistry, Physical

Facile pH-mediated synthesis of morphology-tunable MnCO3 and their transformation to truncated octahedral spinel LiMn2O4 cathode materials for superior lithium storage

Sisi Huang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

添加到收藏夹

Article Geochemistry & Geophysics

Coupling between pressure solution creep and diffusive mass transport in porous rocks

E Gundersen et al.

JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.