4.7 Article

Facilitated Adsorption of Mercury(II) and Chromium(VI) Ions over Functionalized Carbon Nanotubes

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Adsorption Efficiency and Photocatalytic Activity of Silver Sulfide Nanoparticles Deposited on Carbon Nanotubes

Gururaj M. Neelgund et al.

Summary: A multimode, dual functional nanomaterial, CNTs-Ag2S, consisting of carbon nanotubes (CNTs) and silver sulfide (Ag2S) nanoparticles, was prepared through a facile hydrothermal process. The modified CNTs were used to efficiently immobilize and uniformly distribute the Ag2S nanoparticles, allowing CNTs-Ag2S to adsorb toxic Cd(II) and completely degrade hazardous Alizarin yellow R in water. The adsorption of Cd(II) by CNTs-Ag2S followed pseudo-second-order kinetics, with chemisorption being the rate-determining step. The degradation of Alizarin yellow R by CNTs-Ag2S proceeded with pseudo-first-order kinetics according to the Langmuir-Hinshelwood (L-H) model.

CATALYSTS (2023)

Review Chemistry, Multidisciplinary

Removal of heavy metals from binary and multicomponent adsorption systems using various adsorbents - a systematic review

Jonas Bayuo et al.

Summary: The occurrence of potentially harmful heavy metals in the aquatic environment significantly affects both the ecosystem and human health. Therefore, it is important to understand the efficiency and practical applications of adsorbents in removing heavy metals from multicomponent systems. This systematic review provides insights and perspectives through the analysis of relevant literature, highlighting the effectiveness of adsorbents made from locally and naturally occurring materials, as well as the identification of competitive heavy metals sorption mechanisms.

RSC ADVANCES (2023)

Article Energy & Fuels

Two-dimensional WS2 as a new mercury removal material: Mercury conversion pathway and effect of defect

Haoyun Liu et al.

Summary: The study shows that WS2 surface's sulfur defect site exhibits stronger adsorption ability for Hg-0 than the sulfur top site; oxidizing mercury species are easier to be adsorbed by WS2, with higher adsorption energy; the formation of HgS involves a two-step process on S-WS2.
Article Polymer Science

Photoinduced adsorption of Cr(VI) ions in nano-zinc oxide and nano-zinc oxide/polypyrrole composite

Luis E. Ramos-Hernandez et al.

Summary: Zinc oxide-polypyrrole composites have shown the potential to effectively remove hazardous pollutants from water. The composite structure is different from zinc oxide, with a more acidic surface. The composite performs better under light, but its adsorption capacity decreases at neutral and slightly acidic pH due to electrostatic repulsion. However, at alkaline pH, the composite can still interact with the negatively charged Cr(VI) anions and demonstrate a higher adsorption capacity compared to zinc oxide.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

Article Engineering, Environmental

Activated multi-walled carbon nanotubes decorated with zero valent nickel nanoparticles for arsenic, cadmium and lead adsorption from wastewater in a batch and continuous flow modes

Titus Chinedu Egbosiuba et al.

Summary: Nickel nanoparticles supported on activated multi-walled carbon nanotubes were used as an efficient adsorbent for the removal of Pb(II), As(V), and Cd(II) from industrial wastewater. The nanocomposite showed enhanced adsorption capacity and good recycling performance, making it a promising candidate for wastewater treatment applications.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Materials Science, Multidisciplinary

Thiol-functionalized multi-walled carbon nanotubes for effective removal of Pb(II) from aqueous solutions

Guangfei Qu et al.

Summary: In this study, thiol-functionalized multi-walled carbon nanotubes (MWCNT-SH) were synthesized and used as an effective adsorbent for Pb(II) removal. The abundant functional groups on the surface of MWCNT-SH were found to be crucial for the adsorption of Pb(II). The adsorption capacity of MWCNT-SH was approximately 30.5% higher than that of MWCNT-COOH. The adsorption kinetics followed a pseudo-second-order model, and the adsorption isotherm fit well with the Langmuir model. The adsorption process was thermonegative and spontaneous. Moreover, MWCNT-SH showed great potential for removing Pb(II) from different types of wastewater.

MATERIALS CHEMISTRY AND PHYSICS (2022)

Article Biochemistry & Molecular Biology

Adsorption of chromium by exopolysaccharides extracted from lignolytic phosphate solubilizing bacteria

Saranya Kailasam et al.

Summary: In this study, a phosphate solubilizing bacterium, Enterobacter soli, was isolated from rhizosphere soils of mangrove environment. The production of exopolysaccharide (EPS) by Enterobacter soli (EsEPS) was enhanced by optimizing the cultural conditions. The results showed that EsEPS had high adsorption capacity for Cr and could effectively remove it. The structural changes of EsEPS in the presence of Cr were characterized, revealing the interaction between EsEPS and Cr. This study highlights the EPS production capacity of E. Soli bacterium and its potential application in Cr removal through biosorption.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

Article Environmental Sciences

Mechanistic insight into the adsorption of mercury (II) on the surface of red mud supported nanoscale zero-valent iron composite

Manoj Kumar Sahu et al.

Summary: In this study, red mud modified nZVI composite was developed using red mud as a stable supporting medium for the sorptive/reductive removal of mercury (Hg2+) from aqueous solutions. The RM-nZVI showed enhanced sorptive and reductive capacity, making it an ideal alternative for removing Hg2+ from contaminated water.

JOURNAL OF CONTAMINANT HYDROLOGY (2022)

Article Nanoscience & Nanotechnology

Biogenic Synthesis of Magnetite Nanoparticles Using Leaf Extract of Thymus schimperi and Their Application for Monocomponent Removal of Chromium and Mercury Ions from Aqueous Solution

Sintayehu Tamenne Geneti et al.

Summary: Fe3O4 NPs synthesized using leaf extract of plant Thymus schimperi demonstrate excellent potential in removing heavy metal ions, with high removal efficiencies for mercury and chromium. The NPs can be regenerated for multiple cycles with minimal loss of removal efficiency, showcasing their reusability.

JOURNAL OF NANOMATERIALS (2022)

Article Biochemistry & Molecular Biology

Granulation of Nickel-Aluminum-Zirconium Complex Hydroxide Using Colloidal Silica for Adsorption of Chromium(VI) Ions from the Liquid Phase

Ayako Tabuchi et al.

Summary: A granulated agent for adsorbing heavy metals from aqueous media was prepared by combining a nickel-aluminum-zirconium complex hydroxide with colloidal silica as a binder. The granulated agent had a large specific surface area and a high number of hydroxyl groups, resulting in a strong adsorption capacity for Cr(VI) ions.

MOLECULES (2022)

Article Environmental Sciences

Elimination of Chromium (VI) and Nickel (II) Ions in a Packed Column Using Oil Palm Bagasse and Yam Peels

Angel Villabona-Ortiz et al.

Summary: This study explores the single-component adsorption of chromium (VI) and nickel (II) on oil palm bagasse and yam peels in a packed bed column. By optimizing the response variable of removal efficiency, the effects of temperature, bed height, and particle size were evaluated. The bioadsorbents have a porous structure and functional groups that favor adsorption processes. The adsorption mechanisms are cation exchange, precipitation, and complexation on the exposed surface of the biomaterials. The results show that removal percentages higher than 87% were obtained in all cases, with better results for Cr(VI) removal and particle size being the most influential factor.
Article Chemistry, Physical

Bio-Stimulated Adsorption of Cr(VI) from Aqueous Solution by Groundnut Shell Activated Carbon@Al Embedded Material

Dhilleswara Rao Vaddi et al.

Summary: In this study, a low-cost bioadsorbent Al-GNSC was used for Cr(VI) adsorption from aqueous solutions. The Al-GNSC was characterized and optimized, and showed great adsorption capacity for Cr(VI). The adsorbent can also be regenerated with sodium hydroxide solution.

CATALYSTS (2022)

Article Chemistry, Multidisciplinary

Adsorption and Removal of Mercury(II) by a Crosslinked Hyperbranched Polymer Modified via Sulfhydryl

Qian Wang et al.

Summary: In this study, a novel adsorbent was synthesized by preparing highly crosslinked hyperbranched polyamide-amines (H-PAMAMs) via one-pot methods and modifying them with thiourea to contain sulfhydryl groups (CHAP-SH). The adsorbent showed rapid removal performance and strong selectivity for Hg(II) ions. The adsorption behavior followed the pseudo-second-order kinetic model and Langmuir and Redlich-Peterson adsorption isotherm models, indicating monolayer chemisorption. Characterization of the adsorbent before and after adsorption revealed synergistic complexation between the nitrogen-, oxygen-, and sulfur-containing groups in the adsorbent molecule and Hg(II).

ACS OMEGA (2022)

Article Chemistry, Multidisciplinary

Mercury Removal from Water Using a Novel Composite of Polyacrylate-Modified Carbon

Mohammed Al-Yaari et al.

Summary: This study focuses on enhancing the adsorption efficiency of activated carbon (AC) for removing mercury (Hg) from water systems. A new adsorbent called polyacrylate-modified carbon (PAMC) was synthesized by grafting a copolymer onto AC. Detailed characterization and experimental results showed that PAMC has a high adsorption capacity and efficiency for Hg removal, making it a potential candidate for wastewater treatment.

ACS OMEGA (2022)

Review Environmental Sciences

Adsorption of chromium, copper, lead and mercury ions from aqueous solution using bio and nano adsorbents: A review of recent trends in the application of AC, BC, nZVI and MXene

Hifsa Khurshid et al.

Summary: This paper discusses recent trends in using carbonaceous materials and nanomaterials for adsorption of Chromium, Copper, Lead, and Mercury in wastewater. The adsorption capacity depends on various factors such as adsorbent modification technique, initial pH, dosage, contact time, and initial concentration. AC, BC, nZVI, and MXene can achieve high removal efficiencies. AC and BC have higher surface area, while nZVI and MXene have higher reactivity and regeneration capacity. Future studies need to focus on practical application, cost analysis, regeneration capability, and reuse of heavy metals.

ENVIRONMENTAL RESEARCH (2022)

Article Chemistry, Multidisciplinary

Elevated Adsorption of Lead and Arsenic over Silver Nanoparticles Deposited on Poly(amidoamine) Grafted Carbon Nanotubes

Gururaj M. Neelgund et al.

Summary: A high-efficiency adsorbent CNTs-PAMAM-Ag was prepared and successfully adsorbed Pb(II) and As(III) in water. The kinetic study revealed that the adsorption process of Pb(II) and As(III) was controlled by both chemisorption and intraparticle diffusion effects.

NANOMATERIALS (2022)

Article Chemistry, Analytical

Palladium nanoparticles embedded PPy shell coated CNTs towards a high performance hydrazine detection through optical fiber plasmonic sensor

Anisha Pathak et al.

Summary: A facile in-situ solvothermal method was used to synthesize PdNPs/PPy@CNTs nanocomposite, which showed high sensitivity and specificity for sensing hydrazine in groundwater. The nanocomposite's performance was optimized by adjusting composition, thickness, and pH, with a highest sensitivity of 0.09 nm/nM and a limit of detection of 20 nM, making it promising for early detection of hydrazine leakage in combustible environments.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Environmental Sciences

Simultaneous adsorption of mercury species from aquatic environments using magnetic nanoparticles coated with nanomeric silver functionalized with L-Cysteine

Y. Vicente-Martinez et al.

Summary: A novel method using magnetic core nanoparticles, coated with metallic nanomeric silver and functionalized with L-Cysteine, has been introduced for the total and simultaneous removal of various mercury species from aquatic environments. The experimental results show high adsorption efficiency within a short contact time, along with the ability to recover and reuse the nanoparticles. The thermodynamics reveal that the adsorption is of a physicochemical nature, and the equilibrium isotherms are described by a Langmuir model for all the Hg species.

CHEMOSPHERE (2021)

Article Engineering, Environmental

Different Crystal Forms of ZnS Nanomaterials for the Adsorption of Elemental Mercury

Yang Yang et al.

Summary: ZnS is a promising sorbent for recovering Hg-0 from industrial flue gas due to its excellent Hg-0 adsorption capacity. The specific surface area and S active sites were found to be key factors in determining Hg-0 removal performance, with S-S-x showing a high affinity for Hg-0 adsorption.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Article Chemistry, Multidisciplinary

Preparation of Humic Acid/L-Cysteine-Codecorated Magnetic Fe3O4 Nanoparticles for Selective and Highly Efficient Adsorption of Mercury

Keji Wan et al.

Summary: The study synthesized humic acid and L-cysteine-codecorated magnetic Fe3O4 nanoparticles, which demonstrated excellent adsorption capacity and selectivity, with a preference for adsorbing Hg2+ in competitive adsorption. XPS analysis suggested that the enhanced adsorption capacity of this nanomaterial is due to the complexing abilities and ion exchange capabilities of multiple functional groups with Hg2+.

ACS OMEGA (2021)

Article Chemistry, Multidisciplinary

Adsorption of Chromium (VI) by Cu (I)-MOF in Water: Optimization, Kinetics, and Thermodynamics

Hongxue Qi et al.

Summary: The study investigated the adsorption behavior of Cu (I)-MOF material for chromium (VI) in water, and optimized adsorption parameters such as pH, adsorbent amount, and saturation time. The results showed that the material has high adsorption capacity, good stability, and is cost-effective for practical applications. Langmuir isotherm model was found to be the best fit, indicating monolayer adsorption with a maximum adsorption capacity of 95.92 mg•g-1.

JOURNAL OF CHEMISTRY (2021)

Article Chemistry, Applied

Ion-imprinted sponge produced by ice template-assisted freeze drying of salecan and graphene oxide nanosheets for highly selective adsorption of mercury (II) ion

Xinyu Hu et al.

Summary: A sponge with high stability and strong selectivity towards Hg2+ was successfully prepared by combining salecan and graphene oxide. The adsorption properties of the sponge were highly dependent on the salecan content, showing excellent recyclability. The study provides guidance for the development of promising polysaccharide-based adsorbents for the remediation of Hg2+-polluted water.

CARBOHYDRATE POLYMERS (2021)

Article Chemistry, Multidisciplinary

Interference Effect of Experimental Parameters on the Mercury Removal Mechanism of Biomass Char under an Oxy-Fuel Atmosphere

Yiming Zhu et al.

Summary: This study investigated the adsorption of mercury by 1% NH4Cl-modified biomass char under oxy-fuel combustion conditions, and analyzed the effects of temperature, adsorption bed height, and initial mercury concentration on the adsorption process. The results demonstrated that higher temperature and initial mercury concentration led to better mercury adsorption performance, which was closely related to the progress of chemical adsorption and external mass transfer.

ACS OMEGA (2021)

Article Chemistry, Multidisciplinary

Polylactic Acid/Carbon Nanoparticle Composite Filaments for Sensing

Mariana M. Silva et al.

Summary: The study produced PLA/MWCNT composite filaments with enhanced flexibility and electrical conductivity, successfully applied in textile structures. By incorporating a biodegradable plasticizer in the nanocomposites, the dispersion of MWCNT was improved and the flexibility of the filaments increased. Selected compositions showed a suitable response to saturated acetone vapor, indicating potential for application in fabrics with sensing capacity.

APPLIED SCIENCES-BASEL (2021)

Article Environmental Sciences

Adsorption of Hg(II) in solution by mercaptofunctionalized palygorskite

Chao Kang et al.

Summary: In the past decade, the treatment and restoration of soil and water contaminated by mercury and other heavy metals have been a major focus of China's environmental protection authorities. The search for low-cost and high-efficiency adsorbents has become a research hotspot, leading to the development of mercaptofunctionalized palygorskite as an effective adsorbent for Hg2+. The experimental results demonstrated a high adsorption capacity and favorable thermodynamic parameters for Hg2+, with the adsorption process following a pseudo-second-order kinetics model and the Langmuir model well describing the adsorption isotherm.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

Article Engineering, Chemical

Thiol- and Amine-Incorporated UIO-66-NH2 as an Efficient Adsorbent for the Removal of Mercury(II) and Phosphate Ions from Aqueous Solutions

Fathi S. Awad et al.

Summary: The novel adsorbent UIO-66-IT was synthesized and showed high adsorption capacities for mercury and phosphate ions. It followed Langmuir isotherm model indicating monolayer formation and removal through chemical and physical adsorption mechanisms. Regeneration studies demonstrated excellent efficiency and the adsorbent's potential for remediation of polluted water.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

Article Biochemistry & Molecular Biology

Chitosan crosslinked with polyamine-co-melamine for adsorption of Hg2+: Application in purification of polluted water

Weibo Shen et al.

Summary: The modified chitosan with polyamine compounds and melamine derivatives showed enhanced adsorption capacity for Hg2+ ions, reaching equilibrium within 12 hours. The Langmuir model fitted best for the adsorption isotherm, with high adsorption capacities of 1403 and 109.7 mg/g for MCS-4N and MCS-5N, respectively, indicating potential for practical applications in removing Hg ions from aqueous solutions and polluted waters.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Article Chemistry, Analytical

A smart chitosan nonwoven fabric coated with coumarin-based fluorophore for selective detection and efficient adsorption of mercury (II) in water

Xue Chen et al.

Summary: Developing a material for the sensitive detection and efficient adsorption of Hg2+ ions is essential due to its hazardous nature in water pollution. The synthesized novel coumarin-dithioacetal fluorophore (CA-S) successfully coated on chitosan nonwoven fabric exhibited sensitive sensing and efficient adsorption of Hg2+ ions. The functionalized fabric shows promising potential for real industrial water samples, removing almost 99% of Hg2+ ions efficiently to meet wastewater discharge standards.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Multidisciplinary Sciences

The selective adsorption performance and mechanism of multiwall magnetic carbon nanotubes for heavy metals in wastewater

Zhongbing Wang et al.

Summary: A new type of recyclable adsorbent, 6O-MWCNTs@Fe3O4, with excellent adsorption performance has been synthesized in this study, which can efficiently treat heavy metal ions in wastewater. The modification with magnetic nanoparticles not only inherits the advantages of multiwall carbon nanotubes, but also enhances the adsorption capacity and facilitates the magnetic separation and recovery of heavy metals.

SCIENTIFIC REPORTS (2021)

Article Chemistry, Multidisciplinary

Synthesis of Magnetic Short-Channel Mesoporous Silica SBA-15 Modified with a Polypyrrole/Polyaniline Copolymer for the Removal of Mercury Ions from Aqueous Solution

Jingtao Shen et al.

Summary: The novel magnetic short-channel mesoporous silica SBA-15 composite adsorbent PPy-PANI/M-SBA-15 shows significant adsorption capacity for heavy metal mercury ions in optimal conditions. Analysis using response surface method and central composite design revealed the order of importance for adsorption factors. Kinetic and isotherm models accurately simulate the adsorption behavior of mercury ions, demonstrating excellent recyclability and environmentally friendly properties of the adsorbent.

ACS OMEGA (2021)

Article Engineering, Environmental

Adsorption mercury, cobalt, and nickel with a reclaimable and magnetic composite of hydroxyapatite/Fe3O4/polydopamine

Rauf Foroutan et al.

Summary: The study enhanced the adsorptive performance of hydroxyapatite (HAp) using Fe3O4 magnetic nanoparticles and polydopamine (PDA), effectively removing Hg(II), Co(II), and Ni(II). The adsorption process was most efficient at pH 6, following Langmuir and Freundlich models, with a physical mechanism for removal. The composite material showed promising results in removing toxic metals from water sources.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Article Environmental Sciences

Removal performance and mechanisms of Cr(VI) by an in-situ self-improvement of mesoporous biochar derived from chicken bone

Ting Yang et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2020)

Article Multidisciplinary Sciences

Adsorption and bonding strength of chromium species by ferrihydrite from acidic aqueous solutions

Agnieszka Dzieniszewska et al.

Article Chemistry, Multidisciplinary

Contribution of Polylactic Acid and Pd Nanoparticles in the Enhanced Photothermal Effect of Carbon Nanotubes

Gururaj M. Neelgund et al.

CHEMISTRYSELECT (2020)

Review Chemistry, Multidisciplinary

Carbon Nanotube Chemical Sensors

Vera Schroeder et al.

CHEMICAL REVIEWS (2019)

Article Chemistry, Multidisciplinary

Arsenic Removal from Water by Adsorption onto Iron Oxide/Nano-Porous Carbon Magnetic Composite

Sahira Joshi et al.

APPLIED SCIENCES-BASEL (2019)

Article Multidisciplinary Sciences

Equilibrium and kinetic studies on adsorption of chromium(VI) onto pine-needle-generated activated carbon

George M. Ayoub et al.

SN APPLIED SCIENCES (2019)

Article Environmental Sciences

Alkynyl carbon materials as novel and efficient sorbents for the adsorption of mercury(II) from wastewater

Yingjie Li et al.

JOURNAL OF ENVIRONMENTAL SCIENCES (2018)

Article Multidisciplinary Sciences

Adsorption of hexavalent chromium by polyacrylonitrile-based porous carbon from aqueous solution

Bin Feng et al.

ROYAL SOCIETY OPEN SCIENCE (2018)

Article Engineering, Environmental

Cr(VI) removal via anion exchange on a silver-triazolate MOF

Li-Li Li et al.

JOURNAL OF HAZARDOUS MATERIALS (2017)

Article Chemistry, Multidisciplinary

Perspective on Polylactic Acid (PLA) based Sustainable Materials for Durable Applications: Focus on Toughness and Heat Resistance

Vidhya Nagarajan et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)

Article Electrochemistry

Multiwalled Carbon Nanotubes Composited with Palladium Nanocatalysts for Highly Efficient Ethanol Oxidation

Yiran Wang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Article Nanoscience & Nanotechnology

Graphene Oxide-MnFe2O4 Magnetic Nanohybrids for Efficient Removal of Lead and Arsenic from Water

Suresh Kumar et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Article Environmental Sciences

Equilibrium and kinetics studies of arsenate adsorption by FePO4

M. Hamayun et al.

CHEMOSPHERE (2014)

Article Chemistry, Physical

Facile preparation of PdNi/rGO and its electrocatalytic performance towards formic acid oxidation

Yiyi She et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Article Nanoscience & Nanotechnology

An oxygen reduction electrocatalyst based on carbon nanotube-graphene complexes

Yanguang Li et al.

NATURE NANOTECHNOLOGY (2012)

Article Chemistry, Physical

Photocatalytic activity of CdS and Ag2S quantum dots deposited on poly(amidoamine) functionalized carbon nanotubes

Gururaj M. Neelgund et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2011)

Article Electrochemistry

Carbon nanotube supported platinum-palladium nanoparticles for formic acid oxidation

Olumide Winjobi et al.

ELECTROCHIMICA ACTA (2010)

Article Engineering, Biomedical

Comparative chronic in vitro toxicity of hexavalent chromium to osteoblasts and monocytes

Vijay Krishna Raghunathan et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2009)

Article Engineering, Environmental

Adsorption isotherm and kinetic modeling of 2,4-D pesticide on activated carbon derived from date stones

B. H. Hameed et al.

JOURNAL OF HAZARDOUS MATERIALS (2009)

Article Chemistry, Multidisciplinary

Shape-controlled synthesis of metal nanostructures: The case of palladium

Yujie Xiong et al.

ADVANCED MATERIALS (2007)

Article Chemistry, Medicinal

Visible study of mercuric ion and its conjugate in living cells of mammals and plants

ZC Zhang et al.

CHEMICAL RESEARCH IN TOXICOLOGY (2005)

Review Chemistry, Multidisciplinary

Carbon nanotubes in electron donor-acceptor nanocomposites

DM Guldi et al.

ACCOUNTS OF CHEMICAL RESEARCH (2005)

Article Engineering, Environmental

Treatment of electroplating wastewater containing Cu2+, Zn2+ and Cr(VI) by electrocoagulation

N Adhoum et al.

JOURNAL OF HAZARDOUS MATERIALS (2004)

Article Chemistry, Multidisciplinary

Elimination of Cr(VI) from electroplating wastewater by electrodialysis following chemical precipitation

CS Peng et al.

SEPARATION SCIENCE AND TECHNOLOGY (2004)

Article Engineering, Environmental

Removal of hexavalent chromium with a lignocellulosic substrate extracted from wheat bran

L Dupont et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2003)

Article Engineering, Environmental

Removal of chromium(VI) from aqueous solutions by polymer inclusion membranes

CA Kozlowski et al.

WATER RESEARCH (2002)

Article Agricultural Engineering

Removal of Cr(VI) from aqueous solution by adsorption onto activated carbon

K Selvi et al.

BIORESOURCE TECHNOLOGY (2001)