☆ 4.7 Article

Management of heat transfer and hydraulic characteristics of a micro-channel heat sink with various arrangements of rectangular vortex generators utilizing artificial neural network and response surface methodology

CASE STUDIES IN THERMAL ENGINEERING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Automation & Control Systems

Extreme pressure and antiwear additives for lubricant: academic insights and perspectives

Haogang Li et al.

Summary: This article reviews the mechanisms and properties of extreme pressure (EP) and antiwear (AW) additives in boundary lubrication and discusses the advantages and disadvantages of traditional and nanoparticle additives. It also studies the influence of non-polar chain length on traditional additives and the effects of nanoparticle structure parameters, concentration, and media polarity on properties.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Cutting fluid corrosion inhibitors from inorganic to organic: Progress and applications

Haogang Li et al.

Summary: This article discusses the research status and application of cutting fluid corrosion inhibitors, analyzes the film formation mechanism, suitability, and performance of inorganic and organic corrosion inhibitors, and studies the influence of temperature, concentration, and metal surface state on corrosion inhibition effect. The future research directions, such as establishing a molecular dynamics model of corrosion inhibitor failure and accelerating corrosion, and developing general-purpose green additives, are also prospected.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2022)

添加到收藏夹

Article Engineering, Chemical

Synthesis, stability, density, viscosity of ethylene glycol-based ternary hybrid nanofluids: Experimental investigations and model -prediction using modern machine learning techniques

Zafar Said et al.

Summary: A direct sol-gel technique was used to produce rGO-Fe3O4-TiO2 ternary hybrid nanocomposites, and prediction models were developed to forecast their stability and density. Machine learning techniques played a crucial role in the prediction models and proved to be more accurate than traditional analytical methods.

POWDER TECHNOLOGY (2022)

添加到收藏夹

Article Energy & Fuels

Recent advances on improved optical, thermal, and radiative characteristics of plasmonic nanofluids: Academic insights and perspectives

Zafar Said et al.

Summary: This study reviews the application of plasmonic nanofluids in the solar thermal field and their potential role in enhancing the optical properties. It provides an overview of the preparation methods, thermophysical properties, and applications in solar collectors, automotive cooling, and biomedical applications. This work fills the gap in comprehensive reviews of plasmonic nanofluids and aids researchers in keeping up with the latest trends and identifying research gaps in the optical properties of nanofluids for further improving the performance of solar collectors and reducing thermal losses.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

添加到收藏夹

Article Engineering, Chemical

Numerical study on the use of shear-thinning nanofluids in a micro pin-fin heat sink including vortex generators and changes in pin shapes

I. Aguirre et al.

Summary: This study numerically investigated the effects of vortex generators and changes in pin shape on flow characteristics in microchannel heat sinks. The results showed that the use of vortex generators significantly increased heat transfer rates, but also increased pressure drops in Newtonian fluids, while reducing pumping costs in shear-thinning fluids.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2022)

添加到收藏夹

Article Thermodynamics

Response Surface Methodology and Artificial Neural Network modellings on hydraulic and thermal performances of a disk-shaped heat sink with tree-like microchannels

Fangyuan Li et al.

Summary: This study proposes an optimized design of a tree-like microchannel heat sink using Artificial Neural Networks (ANN) and Response Surface Methodology (RSM) to cope with increasing heat generation in micro-scale devices. The performance of both ANN and RSM models were evaluated using four distinct criteria, and the results showed their reliability for this purpose. Based on these models, three optimum design configurations were suggested for different purposes, considering the priority requirements of heat sink implementations.

CASE STUDIES IN THERMAL ENGINEERING (2022)

添加到收藏夹

Article Engineering, Mechanical

Tribology of enhanced turning using biolubricants: A comparative assessment

Xiaoming Wang et al.

Summary: The tribological behavior of cutting is crucial in determining the production cycle, cost, and quality of parts. Minimum quantity lubrication (MQL) based on environmentally friendly biolubricants can modify the contact conditions in cutting zones, but it cannot meet the requirements for machining difficult-to-machine materials. This study comprehensively analyzed the lubrication mechanism and technical performance of enhanced MQL in turning, and conducted a comparative assessment of cutting force, cutting temperature, tool wear, and surface quality under enhanced environmentally friendly lubrication turning. The study provides insights into the mechanism, tribological behavior, and development trend of lubrication in relation to continuous cutting.

TRIBOLOGY INTERNATIONAL (2022)

添加到收藏夹

Article Thermodynamics

Heat transfer efficiency optimization of a multi-nozzle micro-channel heat sink utilizing response surface methodology

Huu Son Le et al.

Summary: This study focuses on the optimization of heat transfer in modern micro-channel heat sinks. The response surface methodology is used to predict the Nusselt number and pressure drop of the coolant. By comparing the results of numerical calculations and the predictions of the response surface model, it is found that the response surface methodology can accurately predict the responses of the heat sink.

CASE STUDIES IN THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Flow and heat transfer optimization of a fin-tube heat exchanger with vortex generators using Response Surface Methodology and Artificial Neural Network

Changgui Xie et al.

Summary: This study proposes a method using response surface methodology (RSM) and artificial neural network (ANN) to optimize the design of fin-tube heat exchangers (FTHEs) with vortex generators (VGs). The results show that ANN outperforms RSM in predicting the Nusselt number and the friction factor.

CASE STUDIES IN THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Effects of longitudinal vortex generator pairs in transverse microchambers on thermal-hydraulic performances and entropy generation in an interrupted microchannel heat sink

Zhenfei Feng et al.

Summary: This study introduces a novel interrupted microchannel heat sink with longitudinal vortex generator (LVG) pairs in transverse microchambers. The effects of LVG pairs on thermal-hydraulic performance and entropy generation in the microchannel were analyzed, revealing that certain parameters can lead to optimal performance.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2022)

添加到收藏夹

Article Engineering, Aerospace

Milling surface roughness for 7050 aluminum alloy cavity influenced by nozzle position of nanofluid minimum quantity lubrication

Zhenjing Duan et al.

Summary: In NMQL milling of aviation aluminum alloy, adjusting the nozzle position parameters is crucial but challenging due to large errors. The study revealed the impact of cutter speed, helical angle, and cavity shape on the flow field, leading to optimal nozzle profile parameters. The results showed that the proper combination of target distance, incidence angle, and elevation angle significantly improved surface roughness, with target distance having the most substantial impact on cutting performance.

CHINESE JOURNAL OF AERONAUTICS (2021)

添加到收藏夹

Review Computer Science, Interdisciplinary Applications

Latest Advancements in Heat Transfer Enhancement in the Micro-channel Heat Sinks: A Review

K. Naga Ramesh et al.

Summary: This article provides information on experimental and numerical studies on heat transfer and its enhancement in micro-scale cooling devices, focusing on heat transfer enhancement techniques in microchannels and the parameters affecting heat transfer rate. Recent studies on improving microchannel heat sink performance through geometry modifications, jet impingement, using Nano fluids, flow boiling, and Magneto-hydrodynamics are thoroughly discussed in this article.

ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Effects of Physicochemical Properties of Different Base Oils on Friction Coefficient and Surface Roughness in MQL Milling AISI 1045

Qingan Yin et al.

Summary: Research found that palm oil showed the best lubrication effect among different vegetable oils, achieving the lowest milling force, friction coefficient, and surface roughness values, resulting in the smoothest workpiece surface. Analysis revealed that palm oil, with a high content of saturated fatty acids, high viscosity, and small contact angle, could form the strongest lubricating oil film at the tool-workpiece interface.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2021)

添加到收藏夹

Article Thermodynamics

Predictive model of convective heat transfer coefficient in bone micro-grinding using nanofluid aerosol cooling

Min Yang et al.

Summary: The study investigates the convective heat transfer characteristics and measurement methods of nanofluid aerosol cooling, establishing a theoretical model for the convective heat transfer coefficient and proposing a new measurement device to validate the theoretical model.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Review Thermodynamics

A review on flow boiling enhancement and fabrication of enhanced microchannels of microchannel heat sinks

Daxiang Deng et al.

Summary: This paper comprehensively reviews recent advancements in flow boiling enhancement and fabrication of enhanced microchannels. It emphasizes the flow boiling enhancement performance of these enhanced microchannels in microchannel heat sinks, while also discussing their advantages and disadvantages after summarizing the classification and manufacturing methods of enhanced microchannels.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Experimental investigations and optimization of surface roughness in turning of en 36 alloy steel using response surface methodology and genetic algorithm

Vishwanath Panwar et al.

Summary: In this study, 15 experiments were conducted based on the Box-Behnken matrix to determine the optimum machining parameters. A surface roughness mathematical framework was designed using genetic algorithms, resulting in an improved rate of content removal.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Development of mathematical model to study the effect of indoor air quality parameters and optimization using response surface methodology

K. B. Prakash et al.

Summary: This study explored the optimal setting and influencing parameters of Indoor Air Quality characteristics in air-conditioned cars using response surface methodology (RSM), identifying recommendations for controlling parameters and demonstrating the feasibility of optimizing IAQ parameters with minimal trial numbers.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Optimization of process parameters using response surface methodology: A review

Samson Jerold Samuel Chelladurai et al.

Summary: Response surface methodology (RSM) is used to optimize process parameters in casting, welding, and machinability studies of composite materials by designing experiments and minimizing the number of experiments, thus improving experimental efficiency and optimizing process parameters.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Thermodynamics

Three-dimensional numerical simulation of saturated annular flow boiling in a narrow rectangular microchannel

Yang Luo et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Optimization on cleaner intensification of ozone production using Artificial Neural Network and Response Surface Methodology: Parametric and comparative study

Ainy Hafeez et al.

JOURNAL OF CLEANER PRODUCTION (2020)

添加到收藏夹

Article Thermodynamics

A comparative numerical study on two-phase boiling fluid flow and heat transfer in the microchannel heat sink with different manifold arrangements

Yang Luo et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Energy & Fuels

Heat Transfer Enhancement of Plate-Fin Heat Sinks with Different Types of Winglet Vortex Generators

Jin-Cherng Shyu et al.

ENERGIES (2020)

添加到收藏夹

Article Thermodynamics

Analysis of thermal performance and pressure loss of subcooled flow boiling in manifold microchannel heat sink

Yang Luo et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Automation & Control Systems

Effect of friction coefficient on chip thickness models in ductile-regime grinding of zirconia ceramics

Min Yang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Thermodynamics

A numerical study of subcooled flow boiling in a manifold microchannel heat sink with varying inlet-to-outlet width ratio

Yang Luo et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

Characterization of a triple concentric-tube heat exchanger with corrugated tubes using Artificial Neural Networks (ANN)

J. D. Moya-Rico et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Numerical comparison of thermal and hydraulic performances for heat exchangers having circular and elliptic cross-section

Sercan Dogan et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

Heat transfer performance of MQL grinding with different nanofluids for Ni-based alloys using vegetable oil

Benkai Li et al.

JOURNAL OF CLEANER PRODUCTION (2017)

添加到收藏夹

Article Thermodynamics

ANN: Prediction of an experimental heat transfer analysis of concentric tube heat exchanger with corrugated inner tubes

Tikendra Nath Verma et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

Influence of geometric parameters on flow and heat transfer performance of micro-channel heat sinks

Hongtao Wang et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Thermodynamics

Enhancement thermodynamic performance of microchannel heat sink by using a novel multi-nozzle structure

Ngoctan Tran et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

添加到收藏夹

Article Green & Sustainable Science & Technology

Experimental evaluation of the lubrication properties of the wheel/workpiece interface in minimum quantity lubrication (MQL) grinding using different types of vegetable oils

Yaogang Wang et al.

JOURNAL OF CLEANER PRODUCTION (2016)

添加到收藏夹

Article Engineering, Industrial

Experimental study on the effect of nanoparticle concentration on the lubricating property of nanofluids for MQL grinding of Ni-based alloy

Yanbin Zhang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)

添加到收藏夹

Article Thermodynamics

Heat transfer efficiency and capital cost evaluation of a three-phase direct contact heat exchanger for the utilisation of low-grade energy sources

Hameed B. Mahood et al.

ENERGY CONVERSION AND MANAGEMENT (2015)

添加到收藏夹

Article Automation & Control Systems

Experimental research on the energy ratio coefficient and specific grinding energy in nanoparticle jet MQL grinding

Dongkun Zhang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)

添加到收藏夹

Article Thermodynamics

Investigations of thermal and flow behavior of bifurcations and bends in fractal-like microchannel networks: Secondary flow and recirculation flow

Chun-ping Zhang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

添加到收藏夹

Article Thermodynamics

Thermal performance analysis of porous-microchannel heat sinks with different configuration designs

Tu-Chieh Hung et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)

添加到收藏夹

Article Thermodynamics

Optimal design of geometric parameters of double-layered microchannel heat sinks

Tu-Chieh Hung et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)

添加到收藏夹

Article Construction & Building Technology

On the evaluation of design parameters effects on the heat transfer efficiency of energy piles

D. Bozis et al.

ENERGY AND BUILDINGS (2011)

添加到收藏夹

Article Thermodynamics

Analysis of three-dimensional heat transfer in micro-channel heat sinks

WL Qu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.