☆ 4.7 Article

An empirical study for the correction of the thermal parameters of a Li-Po battery with carbon-graphene-silicone coatings

CASE STUDIES IN THERMAL ENGINEERING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Evaluation of accuracy for Bernardi equation in estimating heat generation rate for continuous and pulse-discharge protocols in LFP and NMC based Li-ion batteries

Puneet Jindal et al.

Summary: This study verifies the applicability of the Bernardi equation in estimating heat generation in Li-ion batteries, and finds it may overestimate heat generation under pulse-discharge conditions. Specific heat capacities of Li-ion cells are evaluated with a combined experimental-numerical approach to improve the accuracy of heat generation measurement.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Effect analysis on integration efficiency and safety performance of a battery thermal management system based on direct contact liquid cooling

Shangquan Wu et al.

Summary: This study has successfully developed an oil-immersed battery system with high integration ratio and excellent safety, providing a feasible solution for the demand of high safety and high specific energy of electric vehicle battery systems.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Electrochemical modeling of a thermal management system for cylindrical lithium-ion battery pack considering battery capacity fade

Peyman Gholamali Zadeh et al.

Summary: Battery capacity fade analysis was conducted to evaluate the impact of different battery thermal management systems. The results showed that temperature limit had the least negative impact on battery life, while high temperature led to significant capacity fade. PCM provided a more uniform temperature distribution, but required additional heat dissipation mechanism. PCM combined with liquid cooling channels can meet the temperature requirements and enhance the performance of the battery heat management system.

CASE STUDIES IN THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Prediction and prevention of over-temperature risk of Li-ion power batteries based on the critical heat transfer coefficient and intervention time

Guoliang Xu et al.

Summary: In recent years, research on high-performance battery thermal management systems (BTMSs) has increased to improve the safety and reliability of electric vehicle (EV) batteries. This study focuses on the prediction and prevention of battery over-temperature risk using the finite element method. The proposed method provides a novel approach for the research and design of intelligent BTMSs.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Engineering, Manufacturing

Recent progress in the three-dimensional structure of graphene-carbon nanotubes hybrid and their supercapacitor and high-performance battery applications

Muhammad Razlan Zakaria et al.

Summary: The hybridization of graphene and carbon nanotubes to form three-dimensional structures has attracted significant interest due to its prevention of re-stacking and aggregation, maximization of synergistic effect, and excellent functional performance. This review discusses the methods and applications of graphene-CNT hybrid materials.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Experimental study of the damage behaviour of laminated CFRP composites subjected to impulse lightning current

Yafeng Li et al.

Summary: Compared with traditional metal alloy materials, carbon fibre-reinforced polymer (CFRP) composites have many advantages. This study investigates the damage behavior of CFRP laminates exposed to impulse lightning current. Non-destructive techniques show that increasing current amplitude intensifies damage to CFRP samples, while the presence of an insulating epoxy resin layer exacerbates lightning strike damage. The use of expanded copper foil protection mitigated the damage.

COMPOSITES PART B-ENGINEERING (2022)

添加到收藏夹

Review Energy & Fuels

Recent advancement in three dimensional graphene-carbon nanotubes hybrid materials for energy storage and conversion applications

Jeevan Jyoti et al.

Summary: This review article provides a comprehensive overview of the development and applications of three-dimensional graphene-carbon nanotube (3D-GCNTs) hybrid materials. The synthesis of GCNTs, bonding between CNTs and graphene, and potential applications in energy conversion and storage devices are thoroughly discussed.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Article Thermodynamics

Novel design optimization for passive cooling PCM assisted battery thermal management system in electric vehicles

Rekabra Youssef et al.

Summary: This study proposes a novel design optimization by combining jute fibers and PCM to improve the environmental performance and reduce the weight of battery thermal management system. The results suggest that the use of PCM with jute cooling strategy significantly reduces the maximum temperature of the battery.

CASE STUDIES IN THERMAL ENGINEERING (2022)

添加到收藏夹

Article Environmental Studies

UK battery electric bus operation: Examining battery degradation, carbon emissions and cost

Teresa McGrath et al.

Summary: This paper examines the impact of geographical location on the energy consumption of double deck battery electric buses operating in four UK cities. The study considers seasonal variation in ambient temperature and battery degradation, and investigates the implications on operational cost and carbon emissions. Results show that while the operational costs are relatively consistent, carbon emissions vary significantly depending on location.

TRANSPORTATION RESEARCH PART D-TRANSPORT AND ENVIRONMENT (2022)

添加到收藏夹

Article Electrochemistry

Thermal-electrochemical parameters of a high energy lithium-ion cylindrical battery

Kieran O'Regan et al.

Summary: In order to accurately predict the lifetime of commercial cells, multi-physics models can be used. This study measured the thermal properties and variability of transport and thermodynamic properties in a high energy 21700 cylindrical cell, and used these parameters to test a model against experimental data. The results showed improved model fit when considering the parameter dependency on state-of-charge and temperature.

ELECTROCHIMICA ACTA (2022)

添加到收藏夹

Article Thermodynamics

Three-dimensional thermal modeling of high-temperature primary lithium battery with nickel disulfide cathode

Ling Ran et al.

Summary: Thermal modeling is crucial for high-temperature primary lithium batteries. A 3D thermal model was used to observe the thermal behavior from the single cell to the whole battery. The study provides theoretical guidelines for the thermal design and management of thermal batteries.

CASE STUDIES IN THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Numerical modeling of thermal runaway in high-energy lithium-ion battery packs induced by multipoint heating

Yuanmao Li et al.

Summary: In this study, a numerical model was proposed to investigate thermal propagation in a lithium-ion battery pack by integrating ordinary differential equations, heat-transfer partial differential equations, computational fluid dynamics, and thermal radiation. The model was validated through the construction of a three-dimensional geometric model and a thermal abuse test, and it was found that the model can predict temperature changes in the battery pack well. Additionally, the presence of cell-to-cell gaps was found to accelerate heat transfer but compromise energy density.

CASE STUDIES IN THERMAL ENGINEERING (2022)

添加到收藏夹

Article Mechanics

A study of the thermomechanical behaviour of CFRP laminate using small-scale apparatus

Tim J. Aspinall et al.

Summary: The approach developed quantifies the thermomechanical bending behavior of a CFRP laminate and allows investigation of the coupled thermomechanical behavior and performance degradation of the composite material under fire conditions. It provides experimental results essential for numerical model verification and can replace conventional uncoupled approaches in assessing material performance under thermal loads.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Thermodynamics

Analysis of lithium-ion battery thermal models inaccuracy caused by physical properties uncertainty

Ti Dong et al.

Summary: Thermal management is crucial for the safe and efficient operation of lithium-ion batteries in electric vehicles. A three-dimensional thermal model of a 40Ah LiFePO4/graphite prismatic battery is proposed, with the uncertainty of base data thoroughly investigated. Experimental tests on the charge and discharge processes of the battery validate the reliability of the thermal model, which also leads to the proposal of a simplified one-dimensional thermal model for evaluating temperature distribution in prismatic batteries.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Avoiding thermal runaway propagation of lithium-ion battery modules by using hybrid phase change material and liquid cooling

Wencan Zhang et al.

Summary: This paper introduces a novel hybrid battery thermal management system based on phase change material (PCM) and liquid cooling, which utilizes PCM for maintaining operating temperature of the battery and liquid cooling system for preventing thermal runaway propagation. Numerical analysis shows that the system can meet heat dissipation demand under extreme operating conditions.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Graphene-based interlayer for high-performance lithium-sulfur batteries: A review

Yong Liu et al.

Summary: Graphene has been widely investigated as an intermediate layer in Li-S batteries to overcome problems like the insulating characteristic of sulfur and unsatisfactory cycling life. Strategies such as physical and chemical confinement have been utilized to enhance the electrochemical performance of graphene-based interlayers for Li-S batteries. Challenges and prospects for future research in utilizing graphene-based materials in Li-S batteries have been proposed in this review.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Energy & Fuels

Potential of infrared temperature measurements for the online estimation of the state-of-charge of a Li-polymer battery

Luigi Sequino et al.

Summary: This study aims to estimate the State-of-Charge (SoC) of a lithium polymer battery using thermal parameters instead of electric ones, with temperature data playing a significant role in online SoC estimation.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Thermodynamics

Battery thermal management based on multiscale encapsulated inorganic phase change material of high stability

Ziye Ling et al.

Summary: This paper presents a battery thermal management system using an inorganic phase change material (PCM) with a multiscale encapsulation method. The use of expanded graphite at microscale and organosilicon sealant at macroscale enhances the thermal conductivity and stability of the PCM, paving the way for applications in Li-ion battery thermal management. The inorganic PCM demonstrates superior fire resistivity and cooling performance compared to organic PCM, making it a safer and more effective option for commercial battery thermal management systems.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Chemistry, Physical

Edgeless porous carbon coating for durable and powerful lead-carbon batteries

Jae-Hyung Wee et al.

Summary: The study modified the edge sites within activated carbons via thermal treatment to investigate the relationship between edge density and hydrogen evolution reaction, showing significant impacts on the electrochemical performance of lead-carbon batteries. High-temperature thermal treatment resulted in decreased defect density and enhanced crystallinity of the activated carbons.

CARBON (2021)

添加到收藏夹

Article Thermodynamics

Determination of the through-plane thermal conductivity and specific heat capacity of a Li-ion cylindrical cell

K. A. Murashko et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Chemistry, Physical

Simulation and parameter identification based on electrochemical-thermal coupling model of power lithium ion-battery

Yu Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Thermodynamics

Experimental determination on thermal parameters of prismatic lithium ion battery cells

Lei Sheng et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Economics

What does Tesla mean to car buyers? Exploring the role of automotive brand in perceptions of battery electric vehicles

Zoe Long et al.

TRANSPORTATION RESEARCH PART A-POLICY AND PRACTICE (2019)

添加到收藏夹

Article Thermodynamics

Thermal performance enhancement of composite phase change materials (PCM) using graphene and carbon nanotubes as additives for the potential application in lithium-ion power battery

Deqiu Zou et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Article Thermodynamics

Comparison of different cooling methods for lithium ion battery cells

Dafen Chen et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Chemistry, Physical

Heat generation rate measurement in a Li-ion cell at large C-rates through temperature and heat flux measurements

S. J. Drake et al.

JOURNAL OF POWER SOURCES (2015)

添加到收藏夹

Article Thermodynamics

Feasibility study of Boron Nitride coating on Lithium-ion battery casing

L. H. Saw et al.

APPLIED THERMAL ENGINEERING (2014)

添加到收藏夹

Article Chemistry, Physical

Measurement of in-plane thermal conductivity and heat capacity of separator in Li-ion cells using a transient DC heating method

V. Vishwakarma et al.

JOURNAL OF POWER SOURCES (2014)

添加到收藏夹

Article Chemistry, Physical

An investigation on the significance of reversible heat to the thermal behavior of lithium ion battery through simulations

Rui Zhao et al.

JOURNAL OF POWER SOURCES (2014)

添加到收藏夹

Article Chemistry, Physical

Simultaneous estimation of thermal parameters for large-format laminated lithium-ion batteries

Jianbo Zhang et al.

JOURNAL OF POWER SOURCES (2014)

添加到收藏夹

Article Chemistry, Physical

Cost comparison of producing high-performance Li-ion batteries in the US and in China

Ralph J. Brodd et al.

JOURNAL OF POWER SOURCES (2013)

添加到收藏夹

Article Chemistry, Physical

Effect of carbon coating on thermal stability of natural graphite spheres used as anode materials in lithium-ion batteries

Yoon-Soo Park et al.

JOURNAL OF POWER SOURCES (2009)

添加到收藏夹

Article Chemistry, Physical

A cost comparison of fuel-cell and battery electric vehicles

S Eaves et al.

JOURNAL OF POWER SOURCES (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.