☆ 4.7 Article

A 3D numerical analysis using phase change material for cooling circular light emitting diode

CASE STUDIES IN THERMAL ENGINEERING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Numerical investigation of magneto-thermal-convection impact on phase change phenomenon of Nano-PCM within a hexagonal shaped thermal energy storage

Mohsen Izadi et al.

Summary: This study investigates the melting process of paraffin enhanced with metallic alumina nanoparticles inside a hexagonal heat storage unit in the presence of a uniform magnetic field. The results show that the Lorentz force can suppress the charging level of the thermal energy storage system, while the magnetic field inclination angle can control the energy transport and melting motion. Furthermore, increasing the nanoparticle concentration reduces the melting process.

APPLIED THERMAL ENGINEERING (2023)

添加到收藏夹

Article Engineering, Multidisciplinary

Parametric study on a convective flow in a thermal storage using IBM/thermal lattice Boltzmann flux solver

Emad Hasani Malekshah et al.

Summary: This paper focuses on the entropy production of natural convection in a simplified thermal storage using alumina-water nanofluid. The lattice Boltzmann method and Immersed Boundary Method are combined for accurate numerical simulation. The results show the streamlines, temperature field, and the influences of various factors.

ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS (2023)

添加到收藏夹

Article Engineering, Multidisciplinary

Numerical simulation and optimization with artificial neural network of two-phase nanofluid flow in a circular heatsink with cylindrical pin-fins

Chaoping Zhu et al.

Summary: This paper presents the design and simulation of a novel circular heatsink with cylindrical pin-fins. The effects of variables such as pin-fins length, distance between pin-fins, and pin-fins diameter on the maximum and average temperature of the heatsink are investigated. The results are further optimized using machine learning and artificial intelligence to achieve the minimum heatsink temperature. The flow of nanofluid is simulated using a two-phase model and the finite element method. Increasing the length of pin-fins from 5 to 20 mm decreases the average temperature by 11.42 K. Increasing the diameter of pin-fins from 1 to 4 mm reduces the average temperature of the heatsink by 5.98 K.

ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS (2023)

添加到收藏夹

Article Physics, Multidisciplinary

Effects of L-shaped fins on cooling an electronic heat sink fitted under magnetic field of CNT-water/ethylene glycol nanoliquid

Mohamed Dhia Massoudi et al.

Summary: This study numerically investigates the efficiency of using CNT-water/ethylene glycol nanofluid in an inclined square box heat dissipator with L-shaped fins, taking into account the impact of Lorentz powers and the radiative effect of the nanoliquid. The results show that increasing the Rayleigh number and the radiative element enhances the convection cooling rate. The Lorentz forces slow down the convection cooling rate, but this effect is mitigated when radiative emission is maintained. In addition, increasing the length and width of the L-shaped fins significantly improves the convection cooling efficiency.

EUROPEAN PHYSICAL JOURNAL PLUS (2022)

添加到收藏夹

Article Thermodynamics

A three-dimensional thermal analysis for cooling a square Light Emitting Diode by Multiwalled Carbon Nanotube-nanofluid-filled in a rectangular microchannel

Mohamed Bechir Ben Hamida et al.

Summary: This paper investigates the thermal management of LED and the use of different nanofluids in the cooling system. The study found that using MWCNT-Water in the microchannel is the most effective way to cool the heat sink and reduce the junction temperature of the LED lamp.

ADVANCES IN MECHANICAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

A three-dimensional thermal management study for cooling a square Light Edding Diode

Mohamed Bechir Ben Hamida et al.

Summary: This study uses a three-dimensional, time-dependent code to simulate the thermal management of square LED lamps and finds that drilling holes in the heat sink can reduce the junction temperature of the LED lamp. The role of the convection heat transfer coefficient is crucial in ensuring good heat dissipation and cooling of the lamp by increasing the internal exchange surface.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Investigation of heated fins geometries on the heat transfer of a channel filled by hybrid nanofluids under the electric field

Mohamed Bechir Ben Hamida et al.

Summary: The study utilized GFEM to model heat transfer in a channel filled with hybrid nanofluids under the electric field, finding that TiO2-Al2O3 hybrid nanofluids exhibited the highest Nusselt number. Increasing nanoparticle concentration and supply voltage can both enhance heat transfer efficiency in the channel.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Alternate PCM with air cavities in LED heat sink for transient thermal management

Sana Ben Salah et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2019)

添加到收藏夹

Article Thermodynamics

Optimal design of a natural convection heat sink for small thermoelectric cooling modules

Mark Baldry et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Optics

Thermal study of the atomic ratio effect on a cylindrical and an ellipsoidal shaped HgTlI discharge lamps

Besma Ferjani et al.

EUROPEAN PHYSICAL JOURNAL D (2019)

添加到收藏夹

Article Thermodynamics

Improving the thermal regulation and efficiency enhancement of PCM-Integrated PV modules using nano particles

S. A. Nada et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

添加到收藏夹

Article Thermodynamics

Energy investigation of glazed windows containing Nano-PCM in different seasons

Dong Li et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

添加到收藏夹

Article Thermodynamics

Cooling concentrator photovoltaic systems using various configurations of phase-change material heat sinks

Mohamed Emam et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

添加到收藏夹

Article Thermodynamics

Optimization of the thermal distribution of multi-chip LED package

K. Ben Abdelmlek et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

Experimental investigation of a PCM-HP heat sink on its thermal performance and anti-thermal-shock capacity for high

Yuxuan Wu et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Thermodynamics

Development of heat sink with ionic wind for LED cooling

Dong Ho Shin et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

添加到收藏夹

Article Green & Sustainable Science & Technology

Increasing the efficiency of PV panel with the use of PCM

Rok Stropnik et al.

RENEWABLE ENERGY (2016)

添加到收藏夹

Article Energy & Fuels

Thermal performance of a PCM-filled double-glazing unit with different thermophysical parameters of PCM

Dong Li et al.

SOLAR ENERGY (2016)

添加到收藏夹

Article Physics, Multidisciplinary

Mathematical model and computation of heat distribution for LED heat sink

J. X. Zhu et al.

EUROPEAN PHYSICAL JOURNAL PLUS (2016)

添加到收藏夹

Article Thermodynamics

被撤回的出版物: Experimental study on the thermal management of high-power LED headlight cooling device integrated with thermoelectric cooler package (Retracted article. See vol. 159, pg. 415, 2018)

Jing Wang et al.

ENERGY CONVERSION AND MANAGEMENT (2015)

添加到收藏夹

Article Thermodynamics

Enhancement of heat dissipation of LED module with cupric-oxide composite coating on aluminum-alloy heat sink

Donghyun Kim et al.

ENERGY CONVERSION AND MANAGEMENT (2015)

添加到收藏夹

Article Optics

Total pressure and atomic ratio effect on transport coefficients of HgTlI discharge plasma using a LTE chemical model

Mohamed Bechir Ben Hamida et al.

EUROPEAN PHYSICAL JOURNAL D (2015)

添加到收藏夹

Article Thermodynamics

Thermal spreading resistance characteristics of a high power light emitting diode module

Kai-Shing Yang et al.

APPLIED THERMAL ENGINEERING (2014)

添加到收藏夹

Article Thermodynamics

Cooling performance enhancement of LED (Light Emitting Diode) using nano-pastes for energy conversion application

Chang Min Kim et al.

ENERGY (2014)

添加到收藏夹

Article Thermodynamics

Enhanced heat transfer by room temperature deposition of AlN film on aluminum for a light emitting diode package

Yu Jin Heo et al.

APPLIED THERMAL ENGINEERING (2013)

添加到收藏夹

Article Thermodynamics

Cooling performance enhancement of LED (light emitting diode) packages with carbon nanogrease

Seong Rim Nam et al.

ENERGY (2013)

添加到收藏夹

Article Physics, Fluids & Plasmas

Contrasting the Effect of Electric Current Between Vertical and Horizontal High-Pressure Mercury Discharge Lamps

Mohamed Bechir Ben Hamida et al.

IEEE TRANSACTIONS ON PLASMA SCIENCE (2013)

添加到收藏夹

Article Physics, Fluids & Plasmas

Contrast the Effect of the Mass of Mercury Between the Vertical and Horizontal Mercury Discharge Lamps

M. B. Ben Hamida et al.

IEEE TRANSACTIONS ON PLASMA SCIENCE (2012)

添加到收藏夹

Article Thermodynamics

Natural convection around a radial heat sink

Seung-Hwan Yu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)

添加到收藏夹

Article Engineering, Electrical & Electronic

Thermal design and analysis of multi-chip LED module with ceramic substrate

Luqiao Yin et al.

SOLID-STATE ELECTRONICS (2010)

添加到收藏夹

Article Thermodynamics

Thermoelectric air-cooling module for electronic devices

Yu-Wei Chang et al.

APPLIED THERMAL ENGINEERING (2009)

添加到收藏夹

Review Green & Sustainable Science & Technology

Review on thermal energy storage with phase change materials and applications

Atul Sharma et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2009)

添加到收藏夹

Article Thermodynamics

Free-cooling of buildings with phase change materials

B Zalba et al.

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.