☆ 4.7 Article

Synergistic Effect of Ammonium Salts in Sequential Deposition toward Efficient Wide-Band-Gap Perovskite Photovoltaics with PCE Exceeding 20%

ACS APPLIED ENERGY MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Reduced defects and enhanced Vbi in perovskite absorbers through synergetic passivating effect using 4-methoxyphenylacetic acid

Xin Zhou et al.

Summary: The study investigates the passivation mechanism of a bifunctional organic molecule MPA on defects within perovskite absorbers, reducing defect density and recombination loss through synergistic passivation of two functional groups. This results in improved efficiency and environmental tolerance of PSCs.

JOURNAL OF POWER SOURCES (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells

Minjin Kim et al.

Summary: The study replaced the commonly used mesoporous titanium dioxide electron transport layer with a thin layer of polyacrylic acid-stabilized tin(IV) oxide quantum dots, which improved the efficiency and stability of perovskite solar cells and enabled successful scaling up of PSCs production.

SCIENCE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Crowning Lithium Ions in Hole-Transport Layer toward Stable Perovskite Solar Cells

Ying Shen et al.

Summary: State-of-the-art perovskite solar cells (PSCs) exhibit comparable power conversion efficiency (PCE) to silicon photovoltaic devices, but their stability remains a major obstacle to widespread application. A novel phase-transfer-catalyzed LiTFSI doping method has been developed to address stability issues and improve performance. Experimental and theoretical studies show that the interaction between Li+ ions and 12-crown-4 improves stability by reducing the generation of hygroscopic lithium oxides and mitigating Li+ ion migration.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Chemistry, Applied

UV light absorbers executing synergistic effects of passivating defects and improving photostability for efficient perovskite photovoltaics

Jiale Li et al.

Summary: This study systematically investigated the role of UVP additive in perovskite layers, demonstrating significant improvements in the quality of the perovskite absorbers, reduction of defects, enhanced non-radiative recombination efficiency, and efficient interfacial charge extraction. Furthermore, the UVP treated PSCs achieved a champion PCE of 22.46% with enhanced UV stability, showcasing a promising strategy for fabricating efficient and stable perovskite photovoltaics.

JOURNAL OF ENERGY CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Physical

2D perovskite or organic material matter? Targeted growth for efficient perovskite solar cells with efficiency exceeding 24%

Pengyang Wang et al.

Summary: Organic materials are effective in passivating the surface defects of perovskite films, improving the efficiency and stability of perovskite solar cells.

NANO ENERGY (2022)

添加到收藏夹

Article Chemistry, Physical

Origins and influences of metallic lead in perovskite solar cells

Jiwei Liang et al.

Summary: This study reveals the origins and influences of metallic lead (Pb-0) in metal-halide perovskites, and provides a strategy for avoiding the formation of detrimental Pb-0 byproducts. This has significant implications for enhancing the performance of devices such as perovskite solar cells.

JOULE (2022)

添加到收藏夹

Article Engineering, Environmental

Minimizing voltage deficit in Methylammonium-Free perovskite solar cells via surface reconstruction

Chenhui Wang et al.

Summary: This study proposes a surface reconstruction strategy to form a 2D/3D heterojunction, which addresses the voltage deficit issue in methylammonium-free perovskite solar cells and improves their power conversion efficiency.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Manipulation of Perovskite Crystallization Kinetics via Lewis Base Additives

Chenzhe Xu et al.

Summary: The Lewis acid-base adduct approach has been widely used for high-crystalline perovskite films, but the detailed crystallization process manipulated by Lewis base additives has revealed two distinct crystal growth stages, resulting in retardant crystallization kinetics and improved optoelectronic properties. This provides insight into the precise regulation of perovskite film crystallization kinetics towards high performance.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Engineering, Environmental

Grain boundary defect passivation by in situ formed wide-bandgap lead sulfate for efficient and stable perovskite solar cells

Xiaohui Ma et al.

Summary: The study introduces a multifunctional approach by forming a PbSO4 modification layer at the grain boundaries of perovskite films to enhance the power conversion efficiency and stability of PSCs.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Chemistry, Physical

Scalable Fabrication of >90 cm2 Perovskite Solar Modules with >1000 h Operational Stability Based on the Intermediate Phase Strategy

Guoqing Tong et al.

Summary: The study introduces a strategy to fabricate large-area uniform and dense perovskite films with the addition of NH4Cl to the precursor solution. The resulting perovskite solar modules demonstrate high efficiency and good operational stability, exceeding 1600 hours of T-80 lifetime for the 5 x 5 cm^2 module.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Review Chemistry, Physical

Wide-Bandgap Metal Halide Perovskites for Tandem Solar Cells

Jinhui Tong et al.

Summary: Metal halide perovskite solar cells have emerged as the most promising new-generation solar cell technology, especially for wide-bandgap solar cells. Research progress on developing wide-bandgap PSCs and utilizing them in tandem configurations has been highlighted, emphasizing on efficiency improvement and stability challenges.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Chemistry, Physical

Interfacial engineering of a thiophene-based 2D/3D perovskite heterojunction for efficient and stable inverted wide-bandgap perovskite solar cells

Cong Chen et al.

Summary: The device treated with TEACl achieves the highest power conversion efficiency and better stability, forming a thiophene-based 2D/3D perovskite heterojunction. This strategy improves the activation energy of ion movement and reduces the dark saturation current density of the device.

NANO ENERGY (2021)

添加到收藏夹

Article Chemistry, Physical

Cobalt Chloride Hexahydrate Assisted in Reducing Energy Loss in Perovskite Solar Cells with Record Open-Circuit Voltage of 1.20 V

Pengyang Wang et al.

Summary: By introducing cobalt chloride hexahydrate (CoCl2 center dot 6H(2)O) into SnO2 film, favorable energy level alignment and better charge extraction were achieved, leading to an enhanced V-OC and efficiency. This doping method provides an effective strategy for reducing energy loss and enhancing the efficiency of perovskite solar cells.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Manipulated Crystallization and Passivated Defects for Efficient Perovskite Solar Cells via Addition of Ammonium Iodide

Wenjing Qi et al.

Summary: The study demonstrates the use of ammonium-assisted crystallization in a two-step deposition process to fabricate efficient perovskite absorbers for solar cells. The approach results in high-quality perovskite layers with improved device performance and stability over time.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Physical

Highly efficient wide-band-gap perovskite solar cells fabricated by sequential deposition method

Xinxing Liu et al.

Summary: A highly efficient wide-band-gap perovskite solar cell device has been successfully fabricated using the two-step sequential deposition method in this study, with a bandgap of 1.63-1.65 eV; the best solar cell obtained has a power conversion efficiency of 20.35% and a fill factor (FF) of 81.53%.

NANO ENERGY (2021)

添加到收藏夹

Article Chemistry, Physical

Scalable Fabrication of Efficient Perovskite Solar Modules on Flexible Glass Substrates

Xuezeng Dai et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Regulated Crystallization of Efficient and Stable Tin-Based Perovskite Solar Cells via a Self-Sealing Polymer

Gengling Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Chemistry, Physical

NiOx/Spiro Hole Transport Bilayers for Stable Perovskite Solar Cells with Efficiency Exceeding 21%

Renjie Li et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ligand-Modulated Excess PbI2 Nanosheets for Highly Efficient and Stable Perovskite Solar Cells

Huanhuan Wang et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Enhanced Moisture Stability by Butyldimethylsulfonium Cation in Perovskite Solar Cells

Bohyung Kim et al.

ADVANCED SCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

Bifunctional Surface Engineering on SnO2 Reduces Energy Loss in Perovskite Solar Cells

Eui Hyuk Jung et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Review Chemistry, Physical

Materials and Methods for Interface Engineering toward Stable and Efficient Perovskite Solar Cells

Jiangzhao Chen et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Superior Carrier Lifetimes Exceeding 6 μs in Polycrystalline Halide Perovskites

Xiaoyu Yang et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Energy & Fuels

The controllability of PbI2 morphology via nanorod-shaped underlying layer for solution-based perovskite two-step sequential deposition

Shu-Chen Kao et al.

SOLAR ENERGY (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss

Mingyu Jeong et al.

SCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

Revealing the crystallization process and realizing uniform 1.8 eV MA-based wide-bandgap mixed-halide perovskites via solution engineering

Yue-Min Xie et al.

NANO RESEARCH (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Stabilizing halide perovskite surfaces for solar cell operation with wide-bandgap lead oxysalts

Shuang Yang et al.

SCIENCE (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Sulfate-Assisted Interfacial Engineering for High Yield and Efficiency of Triple Cation Perovskite Solar Cells with Alkali-Doped TiO2 Electron-Transporting Layers

Trilok Singh et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Article Energy & Fuels

Wide-Bandgap Perovskite Solar Cells With Large Open-Circuit Voltage of 1653mV Through Interfacial Engineering

Xiaowen Hu et al.

SOLAR RRL (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Synergy of ammonium chloride and moisture on perovskite crystallization for efficient printable mesoscopic solar cells

Yaoguang Rong et al.

NATURE COMMUNICATIONS (2017)

添加到收藏夹

Article Chemistry, Physical

Perovskite Tandem Solar Cells

Niraj N. Lal et al.

ADVANCED ENERGY MATERIALS (2017)

添加到收藏夹

Article Chemistry, Physical

Highly enhanced long time stability of perovskite solar cells by involving a hydrophobic hole modification layer

Cong Chen et al.

NANO ENERGY (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Matching Charge Extraction Contact for Wide-Bandgap Perovskite Solar Cells

Yuze Lin et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Imaging the Long Transport Lengths of Photo-generated Carriers in Oriented Perovskite Films

Shuhao Liu et al.

NANO LETTERS (2016)

添加到收藏夹

Article Chemistry, Physical

Crystallisation dynamics in wide-bandgap perovskite films

M. Jaysankar et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.