☆ 4.7 Article

Additive engineering in spray enables efficient methylammonium-free wide-bandgap perovskite solar cells

MATERIALS TODAY ENERGY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Reexamining the Post-Treatment Effects on Perovskite Solar Cells: Passivation and Chloride Redistribution

Ligang Yuan et al.

Summary: Post-treatment is essential for perovskite solar cells, and this study reveals that chloride redistribution in the perovskite film plays a crucial role in improving performance. Chloride enrichment improves charge transport/recombination and 2D passivation suppresses nonradiative recombination. Cyclohexylmethylammonium iodide treatment shows superior performance compared to phenylethylammonium iodide due to stronger chloride binding energy. This work provides insights into the importance of chloride fixation for enhancing photovoltaic performance.

SMALL METHODS (2023)

添加到收藏夹

Article Chemistry, Physical

Room-Temperature Spray Deposition of Large-Area SnO2 Electron Transport Layer for High Performance, Stable FAPbI3-Based Perovskite Solar Cells

Neetesh Kumar et al.

Summary: Spray-deposited SnO2 films exhibit controllable thickness, granular morphology, high transmittance, and contribute to improved performance and scalability of perovskite solar cells. The high efficiency and storage stability of PSCs based on spray-SnO2 ETL make it a promising candidate for large-scale production in the future.

SMALL METHODS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Steric Engineering Enables Efficient and Photostable Wide-Bandgap Perovskites for All-Perovskite Tandem Solar Cells

Jin Wen et al.

Summary: Steric engineering is used to obtain high-quality and photostable wide-bandgap perovskites suitable for all-perovskite tandem solar cells. By alloying dimethylammonium and chloride, wide bandgaps are obtained with lower bromide contents and minimized lattice strain and trap densities. The resulting WBG perovskite solar cells exhibit significantly improved performance and photostability, with a stabilized power conversion efficiency of 26.0% in all-perovskite tandem solar cells.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Chemistry, Applied

Coffee ring controlment in spray prepared >19% efficiency Cs0.19FA0.81PbI2.5Br0.5 perovskite solar cells

Xinxin Yu et al.

Summary: This study successfully controls the coffee ring effect in spraying technology by using a reaction-dependent regulating strategy, resulting in high-quality perovskite films for solar cells. The use of n-butyl alcohol as a solvent during spraying process effectively inhibits coffee ring effect and improves the performance of perovskite solar cells. This approach provides a reliable method for achieving high repeatability devices with good performance.

JOURNAL OF ENERGY CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Physical

Quadruple-Cation Wide-Bandgap Perovskite Solar Cells with Enhanced Thermal Stability Enabled by Vacuum Deposition

Isidora Susic et al.

Summary: This study presents a process to increase the complexity of vacuum-deposited lead halide perovskite films by multisource deposition and premixing. By adding guanidinium (GA+) to the material formulation, quadruple-cation perovskite films with enhanced thermal stability were obtained. The improved thermal stability was also observed in the corresponding solar cells. This work has important implications for the vacuum processing of complex perovskite formulations in photovoltaics and other fields of application.

ACS ENERGY LETTERS (2022)

添加到收藏夹

Article Energy & Fuels

Scalable Growth of Stable Wide-Bandgap Perovskite towards Large-Scale Tandem Photovoltaics

Congcong Tian et al.

Summary: Solvent engineering is used to deposit wide-bandgap perovskite films, which can be upscaled and stabilized. By surface modification with a 2D perovskite, the efficiency and stability of perovskite solar cells are improved. The wide-bandgap perovskite can also be easily produced through a blade-coating strategy, and shows high efficiency in perovskite/silicon tandem solar cells.

SOLAR RRL (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Nonplanar Spray-Coated Perovskite Solar Cells

Timothy Thornber et al.

Summary: This study explores the feasibility of using ultrasonic spray coating technology to fabricate perovskite solar cells on rigid nonplanar surfaces. The researchers found that devices fabricated on glass substrates held at angles of inclination up to 45 degrees from the horizontal exhibited comparable power conversion efficiencies to those fabricated on horizontal substrates. This study represents the first successful fabrication of rigid curved perovskite solar cells.

ACS APPLIED MATERIALS & INTERFACES (2022)

添加到收藏夹

Article Chemistry, Physical

N-Type Conductive Small Molecule Assisted 23.5% Efficient Inverted Perovskite Solar Cells

Qi Cao et al.

Summary: In this study, a wide-bandgap n-type semiconductor B4PyPPM was introduced to modify the perovskite film via an anti-solvent method. This modification reduced trap state densities and inhibited nonradiative recombination, resulting in improved efficiency and stability of the perovskite film.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Engineering, Environmental

Bromide complimented methylammonium-free wide bandgap perovskite solar modules with high efficiency and stability

Xianpu Ma et al.

Summary: This study proposes a strategy of bromide complementation to improve the efficiency and stability of wide bandgap perovskite-based solar cells. By treating the perovskite surface with trimethylphenylammonium bromide, the charge recombination is significantly reduced and the carrier lifetime is elongated. The solar cells and modules exhibit enhanced stability under moisture, illumination, and heat. Additionally, a high efficiency of 25.0% is achieved in four-terminal perovskite/silicon tandem solar cells.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Direct Surface Passivation of Perovskite Film by 4-Fluorophenethylammonium Iodide toward Stable and Efficient Perovskite Solar Cells

Xiongzhuo Jiang et al.

Summary: Passivating the perovskite layer with organic halide salts directly can reduce film defects and enhance charge transport efficiency, leading to improved device performance and stability. The strategy effectively suppresses nonradiative recombination and reduces recombination losses, resulting in higher device efficiency and good ambient stability.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Review Chemistry, Physical

Wide-Bandgap Metal Halide Perovskites for Tandem Solar Cells

Jinhui Tong et al.

Summary: Metal halide perovskite solar cells have emerged as the most promising new-generation solar cell technology, especially for wide-bandgap solar cells. Research progress on developing wide-bandgap PSCs and utilizing them in tandem configurations has been highlighted, emphasizing on efficiency improvement and stability challenges.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Additive effects of methyl ammonium bromide or formamidinium bromide in methylammonium lead iodide perovskite solar cells using decaphenylcyclopentasilane

Atsushi Suzuki et al.

Summary: In this study, methylammonium lead iodide perovskite solar cells were fabricated and characterized with the incorporation of methylammonium bromide (MABr), formamidinium bromide (FABr), and decaphenylcyclopentasilane (DPPS). The addition of 5% MABr or FABr into the perovskite layer showed improvements in short-circuit current density, shunt resistance, and open-circuit voltages by enhancing uniform morphologies and suppressing defects. The stabilities of the photovoltaic performance were dependent on the degree of incorporation of MABr or FABr with the DPPS layer, which helped to suppress decomposition in the perovskite layer.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)

添加到收藏夹

Article Chemistry, Physical

Propylammonium Chloride Additive for Efficient and Stable FAPbI3 Perovskite Solar Cells

Yong Zhang et al.

Summary: In this study, n-propylammonium chloride (PACl) is proposed as an alternative to methylammonium chloride (MACl) to improve the stability and efficiency of FAPbI(3)-based perovskite solar cells. The addition of PACl increases perovskite grain size and significantly prolongs carrier lifetime. Compared to MACl, the PACl additive leads to better stability against moisture due to the in situ formed barrier at the bulk perovskite.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Interfacial engineering of a thiophene-based 2D/3D perovskite heterojunction for efficient and stable inverted wide-bandgap perovskite solar cells

Cong Chen et al.

Summary: The device treated with TEACl achieves the highest power conversion efficiency and better stability, forming a thiophene-based 2D/3D perovskite heterojunction. This strategy improves the activation energy of ion movement and reduces the dark saturation current density of the device.

NANO ENERGY (2021)

添加到收藏夹

Article Chemistry, Physical

Methylammonium Triiodide for Defect Engineering of High-Efficiency Perovskite Solar Cells

Essa A. Alharbi et al.

Summary: A simple strategy using MAI(3) as an additive has been developed to enhance the performance and stability of photovoltaic devices, with the champion device achieving a high power conversion efficiency and operational stability.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Two birds with one stone: dual grain-boundary and interface passivation enables >22% efficient inverted methylammonium-free perovskite solar cells

Saba Gharibzadeh et al.

Summary: This study successfully enhanced the efficiency and stability of inverted p-i-n structured perovskite solar cells using a dual passivation strategy, achieving high power conversion efficiency and good stability.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Eco-Friendly Spray Deposition of Perovskite Films on Macroscale Textured Surfaces

Simone Sansoni et al.

ADVANCED MATERIALS TECHNOLOGIES (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Efficient, stable silicon tandem cells enabled by anion-engineered wide-bandgap perovskites

Daehan Kim et al.

SCIENCE (2020)

添加到收藏夹

Article Energy & Fuels

Compositional Engineering of Chloride Ion-Doped CsPbBr3Halides for Highly Efficient and Stable All-Inorganic Perovskite Solar Cells

Xueke Li et al.

SOLAR RRL (2020)

添加到收藏夹

Article Energy & Fuels

Effect of Additives AX (A = FA, MA, Cs, Rb, NH4, X = Cl, Br, I) in FAPbI3 on Photovoltaic Parameters of Perovskite Solar Cells

Mei Lyu et al.

SOLAR RRL (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Interfacial Structure and Composition Managements for High-Performance Methylammonium-Free Perovskite Solar Cells

Shunde Li et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Solvent selection for fabrication of low temperature ZnO electron transport layer in perovskite solar cells

S. Hamideh Ahmadi et al.

OPTICAL MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Regulating Surface Termination for Efficient Inverted Perovskite Solar Cells with Greater Than 23% Efficiency

Fengzhu Li et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

2D-3D Mixed Organic-Inorganic Perovskite Layers for Solar Cells with Enhanced Efficiency and Stability Induced by n-Propylammonium Iodide Additives

Disheng Yao et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Highly Reproducible Large-Area Perovskite Solar Cell Fabrication via Continuous Megasonic Spray Coating of CH3NH3PbI3

Mincheol Park et al.

SMALL (2019)

添加到收藏夹

Article Chemistry, Physical

A sequential condensation route as a versatile platform for low cost and efficient hole transport materials in perovskite solar cells

Babak Pashaei et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Physical

Methylammonium Chloride Induces Intermediate Phase Stabilization for Efficient Perovskite Solar Cells

Minjin Kim et al.

JOULE (2019)

添加到收藏夹

Article Chemistry, Physical

Self-assembled propylammonium cations at grain boundaries and the film surface to improve the efficiency and stability of perovskite solar cells

Chengbin Fei et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

High-Efficiency Spray-Coated Perovskite Solar Cells Utilizing Vacuum-Assisted Solution Processing

James E. Bishop et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

One step spray-coated TiO2 electron-transport layers for decent perovskite solar cells on large and flexible substrates

Aibin Huang et al.

NANOTECHNOLOGY (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Manipulating Crystallization of Organolead Mixed-Halide Thin Films in Antisolvent Baths for Wide-Bandgap Perovskite Solar Cells

Yuanyuan Zhou et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

添加到收藏夹

Article Chemistry, Physical

Two-step ultrasonic spray deposition of CH3NH3PbI3 for efficient and large-area perovskite solar cell

Haibo Huang et al.

NANO ENERGY (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Chlorine Incorporation for Enhanced Performance of Planar Perovskite Solar Cell Based on Lead Acetate Precursor

Jian Qing et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

添加到收藏夹

Article Multidisciplinary Sciences

The optoelectronic role of chlorine in CH3NH3PbI3(Cl)-based perovskite solar cells

Qi Chen et al.

NATURE COMMUNICATIONS (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

High-Performance Flexible Perovskite Solar Cells by Using a Combination of Ultrasonic Spray-Coating and Low Thermal Budget Photonic Curing

Sanjib Das et al.

ACS PHOTONICS (2015)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.