4.8 Article

Cryo-TEM studies of binder free high performance FeF2 cathode based full cells enabled by surface engineering

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Multidisciplinary Sciences

The challenges and opportunities of battery-powered flight

Venkatasubramanian Viswanathan et al.

Summary: This Perspective explores the requirements and potential chemistries for battery-powered aircraft. The differences between flight and terrestrial needs are highlighted, with the major constraint for aviation being safe and usable specific energy.

NATURE (2022)

Article Chemistry, Multidisciplinary

The Role of Electrolyte Composition in Enabling Li Metal-Iron Fluoride Full-Cell Batteries

Bryan R. Wygant et al.

Summary: FeF3 conversion cathodes show high theoretical energy density and potential for application, but previous studies were conducted with excess lithium, which did not accurately reflect the cathode's influence on battery performance. This study demonstrates the importance of considering the electrolyte's impact on full-cell performance and achieves the first full-cell demonstration of a Li/FeF3 battery.

ADVANCED SCIENCE (2022)

Article Chemistry, Multidisciplinary

Enabling Long Cycle Life and High Rate Iron Difluoride Based Lithium Batteries by In Situ Cathode Surface Modification

Yong Su et al.

Summary: This study reports a composite cathode material FeF2@PDC composed of metal fluoride FeF2 and polymer-derived carbon PDC. The composite cathode exhibits excellent cycling performance and long lifespan, and can be cycled at high rates while preventing electrolyte decomposition.

ADVANCED SCIENCE (2022)

Article Chemistry, Physical

In-situ synthesis of porous metal fluoride@carbon composite via simultaneous etching/fluorination enabled superior Li storage performance

Kang Du et al.

Summary: A facile in-situ synthesis method was used to prepare porous metal-fluoride-carbon composites, which exhibited fast electron transfer, lithium-ion diffusion kinetics, buffering of volume fluctuation, and the formation of a uniform and thin cathode-electrolyte interphase. The obtained materials showed high specific capacity, excellent capacity retention, and superb electrochemical performance in full-cell configurations.

NANO ENERGY (2022)

Article Chemistry, Physical

An overlooked parameter in Li-S batteries: The impact of electrolyte-to-sulfur ratio on capacity fading

Taner Zerrin et al.

Summary: The electrolyte-to-sulfur (E/S) ratio has a significant impact on the electrochemical performance of Lithium-Sulfur (Li-S) batteries. An optimal E/S ratio should balance the migration of active materials and the wetting of the active material. Low E/S ratios may result in capacity decay due to electrolyte depletion, while high E/S ratios may lead to dissolved lithium polysulfide species diffusing to the lithium anode surface.

NANO ENERGY (2022)

Article Chemistry, Multidisciplinary

Thermochemical Cyclization Constructs Bridged Dual-Coating of Ni-Rich Layered Oxide Cathodes for High-Energy Li-Ion Batteries

Jing Wang et al.

Summary: This study proposes a thermochemical cyclization strategy to enhance the microstructural and electrochemical stabilities of Ni-rich layered oxides. The cathode design based on this strategy significantly improves the cycling performance and rate capability of LiNi0.8Co0.1Mn0.1O2, making it potentially viable for commercialization in high-energy Li-ion batteries.

NANO LETTERS (2022)

Article Chemistry, Multidisciplinary

An All-Solid-State Battery Based on Sulfide and PEO Composite Electrolyte

Yong Su et al.

Summary: Replacing liquid electrolytes with solid polymer electrolytes (SPEs) is considered a vital approach in developing sulfur-based cathodes. This study designs an all-solid-state Li metal battery with a flexible composite cathode and electrolyte, which exhibits excellent cyclic stability and capacity retention. Cryo-transmission electron microscopy reveals the presence of blocking layers at the Li/PEO interface, while in situ optical microscopy demonstrates the reversible shuttle effect contributing to the cyclic stability.
Article Chemistry, Physical

Heuristic Design of Cathode Hybrid Coating for Power-Limited Sulfide-Based All-Solid-State Lithium Batteries

Yuhao Liang et al.

Summary: This research presents a polymer-patched inorganic cathode coating strategy that can improve the electrochemical performance of sulfide-based all-solid-state lithium batteries. By uniformly coating single-crystalline SNCM particles with a hybrid layer of LATP and cPAN, rapid ion transfer and high-quality protection are achieved, leading to significant improvements in capacity retention and rate capability.

ADVANCED ENERGY MATERIALS (2022)

Article Chemistry, Multidisciplinary

Carbon Surface Chemistry: New Insight into the Old Story

Yuxiao Ding et al.

Summary: By analyzing various defects on the carbon surface, this article points out some commonly neglected aspects and misunderstandings in the field of carbon surface chemistry, clarifying how surface chemistry affects the chemical behaviors of carbon in specific chemical reactions. The importance of considering the carbon surface chemistry comprehensively and the prospects for future developments are also provided.

ADVANCED MATERIALS (2022)

Article Chemistry, Multidisciplinary

Eco-friendly electrolytes via a robust bond design for high-energy Li metal batteries

Yiqiang Huang et al.

Summary: This study reports a family of siloxane solvents that enable the formation of an anion-derived inorganic-rich solid electrolyte interphase (SEI) on electrodes, providing high electrochemical stability for Li metal batteries. These eco-friendly and economical electrolytes improve battery performance and meet practical requirements for commercialization.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Article Chemistry, Multidisciplinary

A Cyclized Polyacrylonitrile Anode for Alkali Metal Ion Batteries

Wenli Zhang et al.

Summary: Organic anodes, particularly cyclized polyacrylonitrile (cPAN), have shown excellent potential for alkali metal ion batteries, achieving high reversible capacity and displaying unique potential-dependent solid electrolyte interphase formation. The hexagonal carbon ring, piperidine ring, and pyridine nitrogen in ladder cPAN are identified as the main active sites for lithium-ion storage. Additionally, cPAN demonstrates decent performance as an anode in SIBs and PIBs.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Materials Science, Multidisciplinary

Battery materials for low-cost electric transportation

Kostiantyn Turcheniuk et al.

Summary: This review focuses on key parameters for affordable Li-ion battery-powered electric transportation, including material abundance, processing cost, cell performance, energy density, and manufacturing cost. By analyzing the scarcity of resources and comparing different types of LIB materials, it is suggested that efforts should be dedicated to developing energy-dense conversion-type LIBs. Additionally, the widespread adoption of zero carbon-emission transportation and sustainable energy sources is predicted to be inevitable based on pure economics.

MATERIALS TODAY (2021)

Article Chemistry, Physical

Revisiting metal fluorides as lithium-ion battery cathodes

Xiao Hua et al.

Summary: Metal fluorides, traditionally classified as conversion materials, are instead characterized by diffusion-controlled displacement mechanisms during lithiation. A clear topological relationship between metal fluoride sublattices and LiF has been established, providing insights for the development of a wider range of isomorphic metal fluorides in lithium-ion battery cathode materials.

NATURE MATERIALS (2021)

Article Chemistry, Physical

Effect of Fluoroethylene Carbonate on Solid Electrolyte Interphase Formation of the SiO/C Anode Observed by In Situ Atomic Force Microscopy

Rui Zhao et al.

Summary: Silicon oxide-based materials show promise as anode materials for lithium-ion batteries, with the solid electrolyte interphase playing a crucial role in the performance. A study on the effect of fluoroethylene carbonate (FEC) on the interface film formation of commercial SiO/C anode revealed a dense and stiff SEI layer in FEC-based electrolyte, in contrast to the scattered and thin SEI layer in ethylene carbonate-based electrolyte.

ACS APPLIED ENERGY MATERIALS (2021)

Review Chemistry, Physical

A Review of the Design of Advanced Binders for High-Performance Batteries

Feng Zou et al.

ADVANCED ENERGY MATERIALS (2020)

Article Energy & Fuels

Technological, economic and environmental prospects of all-electric aircraft

Andreas W. Schafer et al.

NATURE ENERGY (2019)

Article Chemistry, Multidisciplinary

Iron Fluoride-Carbon Nanocomposite Nanofibers as Free-Standing Cathodes for High-Energy Lithium Batteries

Wenbin Fu et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Article Materials Science, Ceramics

High-performance phosphorus-modified SiO/C anode material for lithium ion batteries

Fan Song et al.

CERAMICS INTERNATIONAL (2018)

Article Chemistry, Physical

Lithium-Iron (III) Fluoride Battery with Double Surface Protection

Enbo Zhao et al.

ADVANCED ENERGY MATERIALS (2018)

Article Multidisciplinary Sciences

Cryo-STEM mapping of solid-liquid interfaces and dendrites in lithium-metal batteries

Michael J. Zachman et al.

NATURE (2018)

Review Chemistry, Physical

Advancing Lithium Metal Batteries

Bin Liu et al.

Review Chemistry, Multidisciplinary

Conversion cathodes for rechargeable lithium and lithium-ion batteries

Feixiang Wu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Article Chemistry, Physical

Elucidating electrolyte decomposition under electron-rich environments at the lithium-metal anode

Luis E. Camacho-Forero et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2017)

Article Chemistry, Physical

Challenges and Recent Progress in the Development of Si Anodes for Lithium-Ion Battery

Yan Jin et al.

ADVANCED ENERGY MATERIALS (2017)

Review Energy & Fuels

In situ surface protection for enhancing stability and performance of conversion-type cathodes

Feixiang Wu et al.

MRS ENERGY & SUSTAINABILITY (2017)

Article Chemistry, Multidisciplinary

Improved Performance in FeF2 Conversion Cathodes through Use of a Conductive 3D Scaffold and Al2O3 ALD Coating

Sanghyeon Kim et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

Article Chemistry, Multidisciplinary

Lithium-Iron Fluoride Battery with In Situ Surface Protection

Wentian Gu et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Article Biochemistry & Molecular Biology

Tough and elastic hydrogel of hyaluronic acid and chondroitin sulfate as potential cell scaffold materials

Yilu Ni et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2015)

Article Chemistry, Multidisciplinary

PEDOT Encapsulated FeOF Nanorod Cathodes for High Energy Lithium-Ion Batteries

Xiulin Fan et al.

NANO LETTERS (2015)

Article Chemistry, Physical

Conformal Coatings of Cyclized-PAN for Mechanically Resilient Si nano-Composite Anodes

Daniela Molina Piper et al.

ADVANCED ENERGY MATERIALS (2013)

Article Chemistry, Multidisciplinary

Atomistic Insights into the Conversion Reaction in Iron Fluoride: A Dynamically Adaptive Force Field Approach

Ying Ma et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)

Review Multidisciplinary Sciences

Electrical Energy Storage for the Grid: A Battery of Choices

Bruce Dunn et al.

SCIENCE (2011)

Article Electrochemistry

Polyacrylate Modifier for Graphite Anode of Lithium-Ion Batteries

S. Komaba et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2009)

Review Chemistry, Multidisciplinary

Nanomaterials for rechargeable lithium batteries

Peter G. Bruce et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2008)

Article Chemistry, Physical

A new SiO/C anode composition for lithium-ion battery

Chil-Hoon Doh et al.

JOURNAL OF POWER SOURCES (2008)

Review Chemistry, Inorganic & Nuclear

Fluoride based electrode materials for advanced energy storage devices

Glenn G. Amatucci et al.

JOURNAL OF FLUORINE CHEMISTRY (2007)

Article Chemistry, Physical

Adhesion of amorphous polymers as a function of temperature probed with AFM force-distance curves

B Cappella et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2006)

Article Polymer Science

Origins of linear viscoelastic behavior of polymer-nanoparticle composites

V Pryamitsyn et al.

MACROMOLECULES (2006)

Article Polymer Science

Network model for the viscoelastic behavior of polymer nanocomposites

AS Sarvestani et al.

POLYMER (2004)