☆ 4.8 Article

Structural changes in the silver-carbon composite anode interlayer of solid-state batteries

JOULE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

A self-regulated gradient interphase for dendrite-free solid-state Li batteries

Tengrui Wang et al.

Summary: This study addresses the major challenges in solid-state Li metal batteries (SSLMBs) by using a functional gradient Li anode (FGLA), which reduces the interface resistance and suppresses Li dendrite growth. The FGLA not only dramatically reduces the resistance at the interface, but also increases the critical current density, showing excellent cycling performances with different cathode materials.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Development of High-Energy Anodes for All-Solid-State Lithium Batteries Based on Sulfide Electrolytes

Pilgun Oh et al.

Summary: All-solid-state Li batteries (ASSBs) offer better performance and safety than current liquid-based Li-ion batteries (LIBs). Sulfide ASSBs have been extensively studied and advanced. There is a well-established research on suitable cathode materials for sulfide ASSBs, but little has been published on anode materials for sulfide ASSBs and future research directions.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

添加到收藏夹

Article Chemistry, Physical

Direct correlation between void formation and lithium dendrite growth in solid-state electrolytes with interlayers

Vikalp Raj et al.

Summary: Using metallic interlayers in solid-state Li half-cells reduces void growth and improves tolerance to dendrite growth.

NATURE MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Solid-state lithium battery cathodes operating at low pressures

Xiangwen Gao et al.

Summary: The conductivity of the solid electrolyte significantly affects the overall capacity of the solid-state battery cathode. Higher conductivities allow for higher active material loadings and capacities. Reducing the voltage range during cycling can minimize volume change and improve capacity retention.

JOULE (2022)

添加到收藏夹

Article Chemistry, Physical

Designing Cathodes and Cathode Active Materials for Solid-State Batteries

Philip Minnmann et al.

Summary: Solid-state batteries are gaining attention as a potentially safe electrochemical high-energy storage concept. However, there are still challenges in designing cathode active materials that are compatible with superionic solid electrolytes. This perspective provides an overview of the required properties and challenges of inorganic cathode active materials used in solid-state batteries, and proposes guidelines for future development.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Review Chemistry, Physical

The promise of alloy anodes for solid-state batteries

John A. Lewis et al.

Summary: Solid-state batteries, with alloy anode materials, have the potential to provide improved safety, high energy density, and stable cycling. They offer advantages such as avoiding short circuiting and stabilizing the solid-electrolyte interface.

JOULE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Understanding the electro-chemo-mechanics of Li plating in anode-free solid-state batteries with operando 3D microscopy

Eric Kazyak et al.

Summary: During in situ anode formation on garnet Li7La3Zr2O12 (LLZO) solid electrolytes, mechanical stresses influence the morphology of the Li metal plating. This study utilizes operando 3D video microscopy to characterize the electrode morphology and identifies the coupling between morphological evolution and electrochemical signatures, attributed to changes in stress at the interface. Insights from this study provide guidance for optimizing performance and controlling plating uniformity by adjusting interfacial toughness, current collector properties, stack pressure, and cell geometry.

MATTER (2022)

添加到收藏夹

Article Chemistry, Physical

Influence of amorphous carbon interlayers on nucleation and early growth of lithium metal at the current collector-solid electrolyte interface

Moritz H. Futscher et al.

Summary: The use of amorphous carbon as an intermediate layer between the Cu current collector and the Lipon solid electrolyte improves the nucleation and growth of Li metal, leading to enhanced performance of anode-free solid-state batteries.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

添加到收藏夹

Review Chemistry, Physical

The promise of alloy anodes for solid-state batteries

John A. Lewis et al.

Summary: Alloy anode materials in solid-state batteries offer advantages such as avoiding short circuiting with lithium metal and providing chemo-mechanical stabilization of the solid-electrolyte interphase.

JOULE (2022)

添加到收藏夹

Article Multidisciplinary Sciences

A dynamic stability design strategy for lithium metal solid state batteries

Luhan Ye et al.

Summary: A multi-layered electrolyte design can inhibit the growth of lithium dendrites in solid-state lithium metal batteries, improving their performance. However, practical challenges remain in realizing a lithium metal anode for batteries.

NATURE (2021)

添加到收藏夹

Article Chemistry, Physical

Visualizing plating-induced cracking in lithium-anode solid-electrolyte cells

Ziyang Ning et al.

Summary: The propagation of lithium dendrites and cracks through ceramic electrolytes can lead to short circuits in batteries. The cracks initiate near the surface of the lithium electrode and propagate transversely across the electrolyte, driven by lithium ingress.

NATURE MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Graphite-Based Lithium-Free 3D Hybrid Anodes for High Energy Density All-Solid-State Batteries

Xing Xing et al.

Summary: An innovative lithium-free 3D anode design is proposed to mitigate dendrite-driven shorting in all-solid-state lithium batteries. By intentionally inducing lithium metal deposition in pores formed by the 3D framework, this electrode design shows significant improvement in critical current density and cycle life, providing a promising approach for high energy density and low-cost technology.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Electrochemistry

Performance-limiting factors of graphite in sulfide-based all-solid-state lithium-ion batteries

Laura Holtschi et al.

Summary: A suite of analytical techniques were applied to investigate the limitations of fast cycling in composite graphite electrodes in all-solid-state cells with sulfide electrolytes, identifying cracks in the electrodes, poor percolation of conducting particles, and the formation of compounds increasing the interfacial resistance. Despite kinetic limitations, excellent long-term cycling performance was demonstrated at specific rates, suggesting slow self-passivation processes at the interface.

ELECTROCHIMICA ACTA (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Amorphous-Carbon-Coated 3D Solid Electrolyte for an Electro-Chemomechanically Stable Lithium Metal Anode in Solid-State Batteries

Hua Xie et al.

Summary: The study introduces a novel approach to maintain a stable Li metal | electrolyte interface by depositing amorphous carbon nanocoating on a garnet-type solid-state electrolyte, demonstrating outstanding electro-chemomechanical stability and promoting homogeneity in lithium metal stripping and plating processes. This work suggests that amorphous carbon coatings may be a promising strategy for achieving stable Li metal | electrolyte interfaces and reliable Li metal batteries.

NANO LETTERS (2021)

添加到收藏夹

Article Chemistry, Physical

Building a Better Li-Garnet Solid Electrolyte/Metallic Li Interface with Antimony

Romain Dubey et al.

Summary: The study finds that using Sb as an interface layer helps to improve the wettability of Li on LLZO, reducing the interfacial resistance. Experimental results show that both Li/Sb-coated LLZO/Li cells and LLZO/V2O5 full cells exhibit good electrochemical performance without external pressure.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Stress evolution during cycling of alloy-anode solid-state batteries

Sang Yun Han et al.

Summary: The study investigates stress evolution within batteries with composite alloy anodes, highlighting the relationship between stress changes and lithium transfer, as well as the impact of electrode structure and active materials. Furthermore, it demonstrates that composite alloy anodes enable stable long-term cycling in solid-state batteries, providing new understanding of the electrochemistry-mechanics relationship.

JOULE (2021)

添加到收藏夹

Review Physics, Applied

Porous Mixed Ionic Electronic Conductor Interlayers for Solid-State Batteries

So Yeon Kim et al.

Summary: This review discusses the challenges faced by rechargeable solid-state batteries and summarizes recent progress in addressing these issues by incorporating other classes of materials and novel structures. The focus is on providing theoretical explanations on how open nanoporous mixed ion-electron conductor interlayers manipulate beta-phase deposition and stripping behavior to suppress instabilities, with avenues for future design of porous interlayers for SSBs.

ENERGY MATERIAL ADVANCES (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Highly Cyclable All-Solid-State Battery with Deposition-Type Lithium Metal Anode Based on Thin Carbon Black Layer

Naoki Suzuki et al.

Summary: By using a thin carbon black layer as a substrate of a deposition-type Li metal anode in an all-solid-state battery, excellent cycle performance and capacity retention have been achieved. Additionally, adding metal particles to the CB-based anode greatly improves cell performance and extends cycle life, allowing the battery to operate over 700 cycles with good capacity retention.

ADVANCED ENERGY AND SUSTAINABILITY RESEARCH (2021)

添加到收藏夹

Article Chemistry, Physical

Suppressing void formation in all-solid-state batteries: the role of interfacial adhesion on alkali metal vacancy transport

Ieuan David Seymour et al.

Summary: By developing a novel bond breaking model, this study reveals the relationship between alkali metal vacancy segregation and interfacial adhesion at the alkali metal/solid-state electrolyte interface, providing guidelines for suppressing void formation in all-solid-state batteries.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Sodium/Na β Alumina Interface: Effect of Pressure on Voids

Dominic Spencer Jolly et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Chemistry, Physical

The Role of Interlayer Chemistry in Li-Metal Growth through a Garnet-Type Solid Electrolyte

Sewon Kim et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Energy & Fuels

High-energy long-cycling all-solid-state lithium metal batteries enabled by silver-carbon composite anodes

Yong-Gun Lee et al.

NATURE ENERGY (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Physicochemical Concepts of the Lithium Metal Anode in Solid-State Batteries

Thorben Krauskopf et al.

CHEMICAL REVIEWS (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Interfaces and Interphases in All-Solid-State Batteries with Inorganic Solid Electrolytes

Abhik Banerjee et al.

CHEMICAL REVIEWS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Enabling lithium-free manufacturing of pure lithium metal solid-state batteries through in situ plating

Michael J. Wang et al.

NATURE COMMUNICATIONS (2020)

添加到收藏夹

Article Energy & Fuels

2020 roadmap on solid-state batteries

Mauro Pasta et al.

JOURNAL OF PHYSICS-ENERGY (2020)

添加到收藏夹

Article Chemistry, Physical

Interfacial modification of Li/Garnet electrolyte by a lithiophilic and breathing interlayer

Wuliang Feng et al.

JOURNAL OF POWER SOURCES (2019)

添加到收藏夹

Article Chemistry, Physical

Critical stripping current leads to dendrite formation on plating in lithium anode solid electrolyte cells

Jitti Kasemchainan et al.

NATURE MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Solvent-Engineered Design of Argyrodite Li6PS5X (X = Cl, Br, I) Solid Electrolytes with High Ionic Conductivity

Laidong Zhou et al.

ACS ENERGY LETTERS (2019)

添加到收藏夹

Article Chemistry, Physical

Volume Changes of Graphite Anodes Revisited: A Combined Operando X-ray Diffraction and In Situ Pressure Analysis Study

Simon Schweidler et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

添加到收藏夹

Article Chemistry, Physical

Demonstration of high current densities and extended cycling in the garnet Li7La3Zr2O12 solid electrolyte

Nathan J. Taylor et al.

JOURNAL OF POWER SOURCES (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cycle stability of lithium/garnet/lithium cells with different intermediate layers

Ning Zhao et al.

RARE METALS (2018)

添加到收藏夹

Article Chemistry, Physical

Formation of self-limited, stable and conductive interfaces between garnet electrolytes and lithium anodes for reversible lithium cycling in solid-state batteries

Minghui He et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

添加到收藏夹

Article Chemistry, Physical

An in situ element permeation constructed high endurance Li-LLZO interface at high current densities

Yang Lu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

添加到收藏夹

Article Electrochemistry

Effect of Gold Layer on Interface Resistance between Lithium Metal Anode and Li6.25Al0.25La3Zr2O12 Solid Electrolyte

Jungo Wakasugi et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

添加到收藏夹

Article Materials Science, Characterization & Testing

XRD study of phase transformations in lithiated graphite anodes by Rietveld method

Alexander Missyul et al.

POWDER DIFFRACTION (2017)

添加到收藏夹

Article Chemistry, Physical

Mechanism of Lithium Metal Penetration through Inorganic Solid Electrolytes

Lukas Porz et al.

ADVANCED ENERGY MATERIALS (2017)

添加到收藏夹

Article Chemistry, Physical

A two layer electrode structure for improved Li Ion diffusion and volumetric capacity in Li Ion batteries

Chun Huang et al.

NANO ENERGY (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Transient Behavior of the Metal Interface in Lithium Metal-Garnet Batteries

Kun (Kelvin) Fu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Reducing Interfacial Resistance between Garnet-Structured Solid-State Electrolyte and Li-Metal Anode by a Germanium Layer

Wei Luo et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Li7La3Zr2O12 Interface Modification for Li Dendrite Prevention

Chill-Long Tsai et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

添加到收藏夹

Article Electrochemistry

Synthesis, structure and electrochemical performance of the argyrodite Li6PS5Cl solid electrolyte for Li-ion solid state batteries

Chuang Yu et al.

ELECTROCHIMICA ACTA (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Transition from Superlithiophobicity to Superlithiophilicity of Garnet Solid-State Electrolyte

Wei Luo et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

添加到收藏夹

Editorial Material Energy & Fuels

A solid future for battery development

Juergen Janek et al.

NATURE ENERGY (2016)

添加到收藏夹

Article Instruments & Instrumentation

I12: the Joint Engineering, Environment and Processing (JEEP) beamline at Diamond Light Source

Michael Drakopoulos et al.

JOURNAL OF SYNCHROTRON RADIATION (2015)

添加到收藏夹

Review Chemistry, Multidisciplinary

Alloy Negative Electrodes for Li-Ion Batteries

M. N. Obrovac et al.

CHEMICAL REVIEWS (2014)

添加到收藏夹

Article Chemistry, Physical

Layer-by-layer spray deposition and unzipping of single-wall carbon nanotube-based thin film electrodes for electrochemical capacitors

Chun Huang et al.

CARBON (2013)

添加到收藏夹

Article Chemistry, Physical

Lithium Diffusion in Graphitic Carbon

Kristin Persson et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2010)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

Polymorphism of LiAg

V. V. Pavlyuk et al.

SOLID STATE SCIENCES (2010)

添加到收藏夹

Review Chemistry, Multidisciplinary

Lithium Storage ion Carbon Nanostructures

Nitin A. Kaskhedikar et al.

ADVANCED MATERIALS (2009)

添加到收藏夹

Article Chemistry, Physical

Silver: high performance anode for thin film lithium ion batteries

G Taillades et al.

JOURNAL OF POWER SOURCES (2004)

添加到收藏夹

Article Chemistry, Physical

Solid-state lithium battery with graphite anode

K Takada et al.

SOLID STATE IONICS (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.