☆ 4.8 Article

Roll-to-roll solvent-free manufactured electrodes for fast-charging batteries

JOULE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

An electrochemical evaluation of state-of-the-art non-flammable liquid electrolytes for high-voltage lithium-ion batteries

Florian Gebert et al.

Summary: The rapid adoption of lithium-ion batteries, especially in transportation, has raised concerns about their safety, particularly regarding the flammable liquid electrolyte. This study identified and tested eight promising non-flammable liquid electrolytes, finding that the phosphorus-free fluorinated solvents outperformed the phosphate and phosphonate-based solvents in terms of performance and capacity retention.

JOURNAL OF POWER SOURCES (2023)

添加到收藏夹

Review Engineering, Electrical & Electronic

Review on Thermal Runaway of Lithium-Ion Batteries for Electric Vehicles

Liubin Song et al.

Summary: This review summarizes research on the thermal runaway of lithium-ion batteries, including the functions and flame-retardant modifications of battery components, thermal runaway behavior and triggering mechanisms, decomposition reactions of common materials, as well as methods for thermal runaway monitoring and management to enhance the safety of lithium-ion batteries.

JOURNAL OF ELECTRONIC MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Solvent-Free Approach for Interweaving Freestanding and Ultrathin Inorganic Solid Electrolyte Membranes

Changhong Wang et al.

Summary: This study successfully fabricated representative SE membranes with thin thickness and high room-temperature ionic conductivity using PTFE fibrilization technology. The all-solid-state pouch cells prepared with this technology exhibited high capacity and cycling stability.

ACS ENERGY LETTERS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Achieving High Stability and Performance in P2-Type Mn-Based Layered Oxides with Tetravalent Cations for Sodium-Ion Batteries

Panawan Vanaphuti et al.

Summary: P2-type sodium-manganese-based layered cathodes show potential for replacing Li-ion batteries in certain applications. A cobalt-free P2-Na0.72Mn0.75Li0.24X0.01O2 (X = Ti/Si) cathode with high sustainability is developed, which exhibits outstanding capacity and voltage retention. The presence of Ti acts as a protective layer to alleviate side reactions, while Si regulates the local electronic structure and suppresses oxygen redox activities. The cathode also shows superior cycle performance and inhibits microcracking and planar gliding within the particles, making it a promising candidate for high-performance low-cost sodium-ion batteries.

SMALL (2022)

添加到收藏夹

Article Chemistry, Physical

Over-Potential Tailored Thin and Dense Lithium Carbonate Growth in Solid Electrolyte Interphase for Advanced Lithium Ion Batteries

Nan Qin et al.

Summary: This study demonstrates an over-potential tailored Li2CO3 growth mechanism and its importance in stabilizing lithium-ion batteries. By increasing the over-potential, the size of Li2CO3 decreases, leading to the formation of a thin and dense inorganic layer that provides low self-discharge behavior and fast kinetic rate.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Review Chemistry, Physical

Perspectives on strategies and techniques for building robust thick electrodes for lithium-ion batteries

Zhuo Wang et al.

Summary: This article discusses the correlation between thick electrode design and electrochemical performance, analyzing the factors that affect electron-ion transfer and mechanical stability. It summarizes the main design strategies for producing thick electrodes with excellent electrochemo-mechanical properties, reviews state-of-the-art fabrication techniques, and discusses their potential development directions. Challenges and feasible tendencies associated with developing thick electrodes are analyzed and proposed.

JOURNAL OF POWER SOURCES (2022)

添加到收藏夹

Article Chemistry, Physical

Understanding the effect of salt concentrations on fast charging performance of Li-ion cells

Xianyang Wu et al.

Summary: Different concentrations of lithium salt in carbonate electrolyte were studied on the fast charging performance of LiNi0.6Mn0.2Co0.2O2 (NMC622)/graphite pouch cells. The cells with 1.5 M electrolyte showed the best overall performance in fast charging capacity and long-term cycling.

JOURNAL OF POWER SOURCES (2022)

添加到收藏夹

Article Chemistry, Physical

Enabling 6C Fast Charging of Li-Ion Batteries with Graphite/Hard Carbon Hybrid Anodes

Kuan-Hung Chen et al.

Summary: This study demonstrates that by fabricating hybrid anodes with uniform mixtures of graphite and hard carbon, it is possible to achieve high-energy density and efficient fast charging in Li-ion batteries. The optimized hybrid anodes retain significantly higher specific energy after 500 cycles of fast charging compared to graphite anodes under the same conditions, making them a promising solution for electric vehicles.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Review Polymer Science

Challenges in Solvent-Free Methods for Manufacturing Electrodes and Electrolytes for Lithium-Based Batteries

Nina Verdier et al.

Summary: The challenges of lithium battery manufacturing lie in cost and environmental impact. Solvent-casting method is commonly used but has disadvantages. Solvent-free processes, including heat-based and spray-based methods, show promise in developing cost-effective and environmentally friendly lithium batteries. Among these methods, hot-pressing and melt processing are the most commonly used alternatives for both polymer-based electrolytes and electrodes.

POLYMERS (2021)

添加到收藏夹

Article Energy & Fuels

Sustainable Solvent-Free Production and Resulting Performance of Polymer Electrolyte-Based All-Solid-State Battery Electrodes

Laura Helmers et al.

Summary: Research suggests that by adjusting granulation process parameters, production time and costs can be reduced, while the solid polymer electrolyte distribution induced by the process has a significant influence on the rate capability of all-solid-state batteries.

ENERGY TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Physical

Interplay of Lithium Intercalation and Plating on a Single Graphite Particle

Tao Gao et al.

Summary: Improving safety, increasing charging rates, and extending the lifetime of lithium-ion batteries is a major challenge, with the key being to control lithium plating on graphite anodes. Experimental studies have shown that the onset of plating is strongly coupled with phase separation in graphite, occurring only on the fully lithiated edges of particles. The competition between Li insertion and plating is further elucidated through energetics and kinetics analysis.

JOULE (2021)

添加到收藏夹

Article Chemistry, Physical

Enhancing the cycling stability of Ni-rich LiNi0.83Co0.11Mn0.06O2 cathode at 4.5 V via 2,4-difluorobiphenyl additive

Jinhyeok Ahn et al.

Summary: This study proposes the use of 2,4-difluorobiphenyl (FBP) as a fluorine-based cathode electrolyte interphase (CEI)-forming additive for Ni-rich LiNi0.83Co0.11Mn0.06O2 (NCM83), which enhances cycling stability at high cut-off voltages and promotes the formation of a stable CEI layer on the surface. The results demonstrate the potential of introducing a fluorine component to existing additives for the development of new functional additives in lithium-ion battery applications.

JOURNAL OF POWER SOURCES (2021)

添加到收藏夹

Article Chemistry, Physical

Growing vertical graphene sheets on natural graphite for fast charging lithium-ion batteries

Yongbiao Mu et al.

Summary: This study aims to achieve extreme fast charging of lithium ion batteries for electric vehicles by growing vertical graphene sheets on the surface of graphite. The research demonstrates that the vertical graphene sheets can enhance lithium-ion transport rate and reduce tortuosity of lithium ion transport, resulting in improved cycling performance and energy density of the batteries.

CARBON (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Stabilized Lithium, Manganese-Rich Layered Cathode Materials Enabled by Integrating Co-Doping and Nanocoating

Panawan Vanaphuti et al.

Summary: The study successfully integrated Na/F co-doping and AlF3 coating on LMR cathode materials to enhance their electrochemical performance and ionic conductivity, while alleviating structural degradation and metal dissolution issues. This represents a new strategy to improve structural homogeneity and moves closer to commercial viability.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

The Boundary of Lithium Plating in Graphite Electrode for Safe Lithium-Ion Batteries

Wenlong Cai et al.

Summary: The study shows that by defining the endurable amount of uniform Li plating in graphite anode in safe lithium-ion batteries, the presence of dead Li can be eliminated, the average Coulombic efficiency for deposited Li can be improved, leading to high capacity retention and providing new insights for improving the fast-charging capability, low-temperature performance, and energy density of practical lithium-ion batteries.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Chemistry, Physical

Recycled cathode materials enabled superior performance for lithium-ion batteries

Xiaotu Ma et al.

Summary: Recycled LiNi1/3Mn1/3Co1/3O2 demonstrates superior rate and cycle performance, outperforming commercial materials and providing a green and sustainable solution for spent lithium-ion batteries.

JOULE (2021)

添加到收藏夹

Article Chemistry, Physical

Effect of TiOx Surface Modification on the Electrochemical Performances of Ni-Rich (NMC-622) Cathode Material for Lithium-Ion Batteries

Satish Kumar Mylavarapu et al.

Summary: In this study, a cost-effective chemical solution deposition route of a thin TiOx shell on LiNi0.6Mn0.2Co0.2O2 (NMC-622) particles was demonstrated to improve the electrochemical performance. Surface modification with TiOx was found to enhance rate performance and reduce charge-transfer resistance, showcasing the beneficial impact on the electrochemical performance of NMC-622 positive electrodes in lithium-ion battery applications.

ACS APPLIED ENERGY MATERIALS (2021)

添加到收藏夹

Editorial Material Multidisciplinary Sciences

Three ways to improve net-zero emissions targets

Joeri Rogelj et al.

Summary: In order to limit global warming, action plans from countries and companies need to be fair, rigorous, and transparent.

NATURE (2021)

添加到收藏夹

Article Chemistry, Physical

Core-shell Ni-rich NMC-Nanocarbon cathode from scalable solvent-free mechanofusion for high-performance 18650 Li-ion batteries

Nutthaphon Phattharasupakun et al.

Summary: A surface coating approach using carbon nanosphere shell was introduced to improve the drawbacks of Ni-rich LiNi0.8Mn0.1Co0.1O2 (NMC811) cathode, showing higher Li utilization and better stability. The in operando XRD analysis revealed the smooth phase transition of NMC811cs, while the online Differential Electrochemical Mass Spectrometry demonstrated extended onset potential of CO2 and H-2 evolution. Overall, the NMC811cs prototype battery exhibited higher specific capacity, energy, and cycling stability compared to pristine NMC811.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Review Chemistry, Physical

Fast Charging of Lithium-Ion Batteries: A Review of Materials Aspects

Manuel Weiss et al.

Summary: Fast charging is essential for the economic success of electric vehicles, with lithium-ion batteries facing limitations due to the transport of lithium ions within the electrodes. Understanding these limitations is crucial for optimizing material properties for fast-charging applications.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

A universal etching method for synthesizing high-performance single crystal cathode materials

Xiaotu Ma et al.

Summary: NMC cathode materials are popular for their high energy density and low cost, but concerns over stability and safety have limited their practical applications. By using a universal etching approach to synthesize single-crystal cathode materials, researchers have found significant improvements in rate performance and capacity retention compared to polycrystalline cathode materials. This alternative approach offers potential for high energy density and cycle stability in the next generation of lithium-ion batteries.

NANO ENERGY (2021)

添加到收藏夹

Article Energy & Fuels

Solvent-Free Manufacturing of Electrodes for Lithium-Ion Batteries via Electrostatic Coating

Gerrit Schaelicke et al.

ENERGY TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Physical

Ni-rich LiNi0.88Mn0.06Co0.06O2 cathode interwoven by carbon fiber with improved rate capability and stability

Dong Ren et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Chemistry, Physical

Freeze-dried low-tortuous graphite electrodes with enhanced capacity utilization and rate capability

Dingying Dang et al.

CARBON (2020)

添加到收藏夹

Article Materials Science, Ceramics

A robust carbon coating strategy toward Ni-rich lithium cathodes

Gang Chen et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Instruments & Instrumentation

PyXAS - an open-source package for 2D X-ray near-edge spectroscopy analysis

Mingyuan Ge et al.

JOURNAL OF SYNCHROTRON RADIATION (2020)

添加到收藏夹

Article Multidisciplinary Sciences

3D microstructure design of lithium-ion battery electrodes assisted by X-ray nano-computed tomography and modelling

Xuekun Lu et al.

NATURE COMMUNICATIONS (2020)

添加到收藏夹

Article Electrochemistry

Li2CO3 decomposition in Li-ion batteries induced by the electrochemical oxidation of the electrolyte and of electrolyte impurities

Anna T. S. Freiberg et al.

ELECTROCHIMICA ACTA (2020)

添加到收藏夹

Article Chemistry, Physical

Correlating the influence of porosity, tortuosity, and mass loading on the energy density of LiNi0.6Mn0.2Co0.2O2 cathodes under extreme fast charging (XFC) conditions

Dhrupad Parikh et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Chemistry, Physical

The electrode tortuosity factor: why the conventional tortuosity factor is not well suited for quantifying transport in porous Li-ion battery electrodes and what to use instead

Tuan-Tu Nguyen et al.

NPJ COMPUTATIONAL MATERIALS (2020)

添加到收藏夹

Article Electrochemistry

In Situ Analysis of NMC|graphite Li-Ion Batteries by Means of Complementary Electrochemical Methods

Imanol Landa-Medrano et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

添加到收藏夹

Article Electrochemistry

Influence of Binder Coverage on Interfacial Chemistry of Thin Film LiNi0.6Mn0.2Co0.2O2 Cathodes

Nathan D. Phillip et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

添加到收藏夹

Article Electrochemistry

Enhancing the Lithium Ion Conductivity of an All Solid-State Electrolyte via Dry and Solvent-Free Scalable Series Production Processes

Linus Froboese et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

添加到收藏夹

Article Chemistry, Physical

Rapid Lithium Diffusion in Order@Disorder Pathways for Fast-Charging Graphite Anodes

Wenlong Cai et al.

SMALL STRUCTURES (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Study of Immersion of LiNi0.5Mn0.3Co0.2O2 Material in Water for Aqueous Processing of Positive Electrode for Li-Ion Batteries

Marie Bichon et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Physical

Understanding thickness and porosity effects on the electrochemical performance of LiNi0.6Co0.2Mn0.2O2-based cathodes for high energy Li-ion batteries

C. Heubner et al.

JOURNAL OF POWER SOURCES (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Strengthening the Electrodes for Li-Ion Batteries with a Porous Adhesive Interlayer through Dry-Spraying Manufacturing

Jin Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Made From Henna! A Fast-Charging, High-Capacity, and Recyclable Tetrakislawsone Cathode Material for Lithium Ion Batteries

Mikhail Miroshnikov et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

A New Aspect of the Li Diffusion Enhancement Mechanism of Ultrathin Coating Layer on Electrode Materials

Yaqi Zhu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-Performance Graphite Recovered from Spent Lithium-Ion Batteries

Xiaotu Ma et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

添加到收藏夹

Article Chemistry, Physical

Selenium-sulfur (SeS) fast charging cathode for sodium and lithium metal batteries

Viet Hung Pham et al.

ENERGY STORAGE MATERIALS (2019)

添加到收藏夹

Article Electrochemistry

Temperature and Concentration Dependence of the Ionic Transport Properties of Lithium-Ion Battery Electrolytes

Johannes Landesfeind et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

添加到收藏夹

Article Computer Science, Software Engineering

pytrax: A simple and efficient random walk implementation for calculating the directional tortuosity of images

T. G. Tranter et al.

SOFTWAREX (2019)

添加到收藏夹

Article Electrochemistry

Coating-Dependent Electrode-Electrolyte Interface for Ni-Rich Positive Electrodes in Li-Ion Batteries

Pinar Karayaylali et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

添加到收藏夹

Article Chemistry, Physical

Binder migration during drying of lithium-ion battery electrodes: Modelling and comparison to experiment

F. Font et al.

JOURNAL OF POWER SOURCES (2018)

添加到收藏夹

Article Chemistry, Physical

Spray printing of self-assembled porous structures for high power battery electrodes

Sang Ho Lee et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

添加到收藏夹

Article Chemistry, Physical

Visualizing the Carbon Binder Phase of Battery Electrodes in Three Dimensions

Sohrab R. Daemi et al.

ACS APPLIED ENERGY MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Microstructure formation of lithium-ion battery electrodes during drying An - ex-situ study using cryogenic broad ion beam slope cutting and scanning electron microscopy (Cryo-BIB-SEM)

Stefan Jaiser et al.

JOURNAL OF POWER SOURCES (2017)

添加到收藏夹

Article Chemistry, Physical

Investigation of binder distribution in graphite anodes for lithium-ion batteries

Marcus Mueller et al.

JOURNAL OF POWER SOURCES (2017)

添加到收藏夹

Article Chemistry, Physical

Solvent-free dry powder coating process for low-cost manufacturing of LiNi1/3Mn1/3Co1/3O2 cathodes in lithium-ion batteries

Mohanad Al-Shroofy et al.

JOURNAL OF POWER SOURCES (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Understanding Interfacial-Energy-Driven Dry Powder Mixing for Solvent-Free Additive Manufacturing of Li-Ion Battery Electrodes

Brandon Ludwig et al.

ADVANCED MATERIALS INTERFACES (2017)

添加到收藏夹

Article Engineering, Industrial

Manufacturing energy analysis of lithium ion battery pack for electric vehicles

Chris Yuan et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2017)

添加到收藏夹

Article Engineering, Chemical

Delamination behavior of lithium-ion battery anodes: Influence of drying temperature during electrode processing

M. Baunach et al.

DRYING TECHNOLOGY (2016)

添加到收藏夹

Article Electrochemistry

Multi-Particle Model for a Commercial Blended Lithium-Ion Electrode

Z. Mao et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

添加到收藏夹

Article Chemistry, Physical

Novel solvent-free direct coating process for battery electrodes and their electrochemical performance

Dong-Won Park et al.

JOURNAL OF POWER SOURCES (2016)

添加到收藏夹

Article Electrochemistry

Tortuosity Determination of Battery Electrodes and Separators by Impedance Spectroscopy

Johannes Landesfeind et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Solvent-Free Manufacturing of Electrodes for Lithium-ion Batteries

Brandon Ludwig et al.

SCIENTIFIC REPORTS (2016)

添加到收藏夹

Article Chemistry, Physical

Electrochemical cycling behaviour of lithium carbonate (Li2CO3) pre-treated graphite anodes - SEI formation and graphite damage mechanisms

Sandeep Bhattacharya et al.

CARBON (2014)

添加到收藏夹

Article Engineering, Environmental

Pilot-scale elaboration of graphite/microfibrillated cellulose anodes for Li-ion batteries by spray deposition on a forming paper sheet

D. Beneventi et al.

CHEMICAL ENGINEERING JOURNAL (2014)

添加到收藏夹

Article Chemistry, Physical

Electrochemical investigation of an artificial solid electrolyte interface for improving the cycle-ability of lithium ion batteries using an atomic layer deposition on a graphite electrode

Hsin-Yi Wang et al.

JOURNAL OF POWER SOURCES (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

Enhancing the performances of Li-ion batteries by carbon-coating: present and future

Huiqiao Li et al.

CHEMICAL COMMUNICATIONS (2012)

添加到收藏夹

Article Electrochemistry

Nonequilibrium Thermodynamics of Porous Electrodes

Todd R. Ferguson et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Preparation and characterization of PVDF/CaCO3 composites

Joao Sinezio de C. Campos et al.

MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY (2007)

添加到收藏夹

Article Electrochemistry

Design and optimization of a natural graphite/iron phosphate lithium-ion cell

V Srinivasan et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.