☆ 4.6 Article

Single and double-layered kirigami corrugated sandwich panels against impact loads

STRUCTURES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Mechanics

Experimental investigation into the synergetic damage of foam-filled and unfilled corrugated core hybrid sandwich panels under combined blast and fragment loading

Pan Zhang et al.

Summary: This paper investigates the effect of foam filling on the performance of sandwich panels under combined blast and fragments loading. The experimental results show that increasing the stand-off distance can alleviate perforation failure, increasing the foam filler density can reduce permanent deformation of the panels, and foam filling can relieve debonding failure between the face sheet and core webs.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Elevated shock resistance of all-metallic sandwich beams with honeycomb-supported corrugated cores

Zengshen Yue et al.

Summary: This study proposes lightweight sandwich beams with honeycomb-supported corrugated cores and investigates their dynamic responses and shock resistance. The results show that the hybrid-cored sandwich beam can significantly enhance shock resistance, especially at lower projectile momentum, due to the beneficial interaction effect between honeycomb insertions and folded plates.

COMPOSITES PART B-ENGINEERING (2022)

添加到收藏夹

Article Engineering, Civil

Crashworthiness analysis and parametric investigation on kirigami corrugated structures

Zhejian Li et al.

Summary: The crashworthiness of a novel kirigami corrugated unit with various geometric configurations is analyzed in this study. It is found that the kirigami units exhibit significantly improved crashworthiness compared to conventional corrugated units. The inclining angle of the sidewall strongly affects the crashworthiness and should be controlled between 50 and 55 degrees for optimal performance. Careful selection of the top face width and unit length is also important to avoid inefficient energy absorption and fabrication issues.

THIN-WALLED STRUCTURES (2022)

添加到收藏夹

Article Engineering, Civil

Three-point bending performance of sandwich panels with various types of cores

Fukun Xia et al.

Summary: The bending performances of various types of sandwich panels were studied and compared experimentally and numerically in this paper. Three distinct modes of deformation were identified through parametric studies. The analysis results showed that the honeycomb core had the highest specific energy absorption.

THIN-WALLED STRUCTURES (2022)

添加到收藏夹

Article Engineering, Civil

Parametric finite element study of novel corrugated steel deck for two-way action in steel-concrete composite floors

Keerthana John et al.

Summary: By studying the two-way action of composite steel-concrete slabs, it is found that using corrugated decks can achieve this effect. Through research on parameters such as depth, spacing, angle of hat sections, and aspect ratio of the decks, the effect of two-way action can be optimized.

STRUCTURES (2022)

添加到收藏夹

Article Engineering, Civil

Failure mode analysis and validation of hierarchical sandwich structures under compression

Xinxun Guo et al.

Summary: Based on the elastic thin plate theory, the mechanical properties and failure pattern of hierarchical sandwich structures were studied, considering local failure defects. The theoretical predictions were verified through experiments, showing accurate results for the structural failure mode and ultimate bearing capacity.

STRUCTURES (2022)

添加到收藏夹

Article Engineering, Mechanical

Origami metamaterial with two-stage programmable compressive strength under quasi-static loading

Zhejian Li et al.

Summary: The proposed origami metamaterial with two-stage programmable compressive strength combines stacked Miura-origami and rhombic honeycomb structure. By adjusting the geometries, the compressive response of each stage can be programmed within a certain range while minimizing crushing resistance fluctuation. The programmability of compressive properties is demonstrated and verified through analytical modeling, numerical analysis, and quasi-static compressive testing.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Engineering, Mechanical

Impact response of a novel sandwich structure with Kirigami modified corrugated core

Zhejian Li et al.

Summary: The novel Kirigami modified corrugated core has demonstrated superior crushing performance under dynamic loading, outperforming the conventional corrugated core in impact resistance. The vertical fold-ins of the Kirigami modified core provide additional support, increasing the crushing resistance of unit cells.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2021)

添加到收藏夹

Article Engineering, Mechanical

Dynamic behaviour of graded origami honeycomb

Leo de Waal et al.

Summary: Efforts to improve cellular structures in impact scenarios through the introduction of gradients in mechanical properties have shown promise. Origami techniques offer a convenient way to transform 2D sheets into 3D structures, with the ability to vary the crease pattern for graded topology. Experimental testing validated that origami honeycomb cores can exhibit similar advantages to traditional grading methods under dynamic loading, showing potential as an attractive alternative.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

On effective mechanical properties of an orthogonal corrugated sandwich structure

Yuan Zhu et al.

Summary: This study investigates the effective mechanical properties of an orthogonal corrugated sandwich structure through analytical and numerical methods, identifying necessary conditions for geometric design, elastic properties, and collapse surfaces. Finite element simulations validate the analytical model, showing good agreement with numerical results. Additionally, the orthogonal corrugated sandwich structure exhibits better shear performance than the conventional counterpart with appropriate design.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Engineering, Aerospace

Core reinforcement design for improving flexural energy-absorption of corrugated sandwich composite structure

Yiru Ren et al.

Summary: A new lightweight vertical stiffener is proposed to enhance Specific Energy-Absorption behavior of Sandwich Composite Structure; By investigating stiffeners with different thicknesses, numbers, and positions, it is found that stiffeners can significantly improve the energy absorption performance of the composite structure.

CHINESE JOURNAL OF AERONAUTICS (2021)

添加到收藏夹

Article Engineering, Civil

Energy absorption behaviour of an aluminium foam-filled circular-triangular nested tube energy absorber under impact loading

Yonghui Wang et al.

Summary: This study developed a novel aluminium foam-filled circular-triangular nested tube (AFCTNT) energy absorber and investigated its energy absorption behavior under impact loading through experimental and numerical studies. It was found that the deformation modes of the AFCTNT energy absorbers were significantly affected by the volume of the aluminium foam filler, and filling aluminium foam improved the energy absorption performances, including higher energy absorption and efficiency. Both experimental and numerical results indicated that the AFCTNT energy absorber with fully-filled aluminium foam outperformed other configurations due to a more significant interaction effect.

STRUCTURES (2021)

添加到收藏夹

Article Engineering, Mechanical

Dynamic response of clamped sandwich beams with fluid-fillied corrugated cores

Xin Wang et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

The behavior of a functionally graded origami structure subjected to quasi-static compression

Lin Yuan et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Article Engineering, Civil

Energy absorption of kirigami modified corrugated structure

Zhejian Li et al.

THIN-WALLED STRUCTURES (2020)

添加到收藏夹

Review Engineering, Civil

Thin-walled corrugated structures: A review of crashworthiness designs and energy absorption characteristics

Ngoc San Ha et al.

THIN-WALLED STRUCTURES (2020)

添加到收藏夹

Article Mechanics

An experimental investigation on low-velocity impact response of a novel corrugated sandwiched composite structure

Tian Zhao et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Out-of-plane compressive performance and energy absorption of multi-layer graded sinusoidal corrugated sandwich panels

Zhong Zhang et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Engineering, Mechanical

Experimental observations of the double shock deformation mode in density graded honeycombs

Jianjun Zhang et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Composites

Low-velocity impact behaviour of a shear thickening fluid (STF) and STF-filled sandwich composite panels

Kunkun Fu et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Mechanical

On the influence of the property gradient on the impact behavior of graded multilayer sandwich with corrugated cores

B. T. Cao et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2018)

添加到收藏夹

Article Engineering, Mechanical

The low velocity impact response of sandwich beams with a corrugated core or a Y-frame core

L. St-Pierre et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2015)

添加到收藏夹

Article Engineering, Mechanical

Quasi-static crushing of eggbox, cube, and modified cube foldcore sandwich structures

R. K. Fathers et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2015)

添加到收藏夹

Article Mechanics

The behaviour of curved-crease foldcores under low-velocity impact loads

J. M. Gattas et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)

添加到收藏夹

Article Engineering, Mechanical

Response of aluminium corrugated sandwich panels under air blast loadings: Experiment and numerical simulation

Xin Li et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2014)

添加到收藏夹

Article Engineering, Civil

Experimental and numerical studies on the quasi-static and dynamic crushing responses of multi-layer trapezoidal aluminum corrugated sandwiches

Cenk Kilicaslan et al.

THIN-WALLED STRUCTURES (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

The mechanical behaviour of corrugated-core sandwich panels

M. R. M. Rejab et al.

COMPOSITES PART B-ENGINEERING (2013)

添加到收藏夹

Article Mechanics

The dynamic response of clamped rectangular Y-frame and corrugated core sandwich plates

V. Rubino et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2009)

添加到收藏夹

Article Mechanics

Dynamic crushing of sandwich panels with prismatic lattice cores

M. T. Tilbrook et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)

添加到收藏夹

Article Engineering, Mechanical

Experimental investigation of blast wall panels under shock pressure loading

G. K. Schleyer et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2007)

添加到收藏夹

Article Mechanics

Hierarchical corrugated core sandwich panel concepts

Gregory W. Kooistra et al.

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2007)

添加到收藏夹

Article Mechanics

The compressive and shear responses of corrugated and diamond lattice materials

F. Cote et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.